[Spice-devel] [PATCH v3 2/6] qxl-wddm-dod: Option to provide frequency data to the OS

[Yuri Benditovich]

Concentrate filling of signal info in single procedure.
Fill signal info with specific or default frequency data
according to the global flag of VSync support.
Note that the state of this flobal flag must be defined only
on driver startup (based on OS version or any other information
available at DriverEntry) and can't be changed later.

Signed-off-by: Yuri Benditovich <yuri.benditovich at daynix.com>
---
 qxldod/QxlDod.cpp | 71 ++++++++++++++++++++++++++++++++-----------------------
 qxldod/QxlDod.h   |  2 ++
 2 files changed, 43 insertions(+), 30 deletions(-)

diff --git a/qxldod/QxlDod.cpp b/qxldod/QxlDod.cpp
index d4fd05a..9f83d22 100755
--- a/qxldod/QxlDod.cpp
+++ b/qxldod/QxlDod.cpp
@@ -19,6 +19,10 @@
                           (QXL_INTERRUPT_CURSOR) | \
                           (QXL_INTERRUPT_IO_CMD))
 
+#define VSYNC_RATE      75
+
+BOOLEAN g_bSupportVSync;
+
 // BEGIN: Non-Paged Code
 
 // Bit is 1 from Idx to end of byte, with bit count starting at high order
@@ -826,6 +830,39 @@ NTSTATUS QxlDod::AddSingleSourceMode(_In_ CONST DXGK_VIDPNSOURCEMODESET_INTERFAC
     return STATUS_SUCCESS;
 }
 
+static VOID FillSignalInfo(D3DKMDT_VIDEO_SIGNAL_INFO& SignalInfo, const VIDEO_MODE_INFORMATION *pVideoModeInfo, LPCSTR caller)
+{
+    PAGED_CODE();
+    SignalInfo.VideoStandard = D3DKMDT_VSS_OTHER;
+    SignalInfo.TotalSize.cx = pVideoModeInfo->VisScreenWidth;
+    SignalInfo.TotalSize.cy = pVideoModeInfo->VisScreenHeight;
+    SignalInfo.ActiveSize = SignalInfo.TotalSize;
+    if (g_bSupportVSync)
+    {
+        UINT val;
+        SignalInfo.VSyncFreq.Numerator = VSYNC_RATE;
+        SignalInfo.VSyncFreq.Denominator = 1;
+        val =
+            SignalInfo.VSyncFreq.Numerator *
+            pVideoModeInfo->VisScreenWidth *
+            pVideoModeInfo->VisScreenHeight;
+        SignalInfo.PixelRate = val;
+        SignalInfo.HSyncFreq.Numerator = val / pVideoModeInfo->VisScreenHeight;
+        SignalInfo.HSyncFreq.Denominator = 1;
+        DbgPrint(TRACE_LEVEL_INFORMATION, ("by %s: filling with frequency data for %dx%d\n", caller, pVideoModeInfo->VisScreenWidth, pVideoModeInfo->VisScreenHeight));
+    }
+    else
+    {
+        SignalInfo.VSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
+        SignalInfo.VSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
+        SignalInfo.HSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
+        SignalInfo.HSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
+        SignalInfo.PixelRate = D3DKMDT_FREQUENCY_NOTSPECIFIED;
+        DbgPrint(TRACE_LEVEL_INFORMATION, ("by %s: filling without frequency data for %dx%d\n", caller, pVideoModeInfo->VisScreenWidth, pVideoModeInfo->VisScreenHeight));
+    }
+    SignalInfo.ScanLineOrdering = D3DDDI_VSSLO_PROGRESSIVE;
+}
+
 // Add the current mode information (acquired from the POST frame buffer) as the target mode.
 NTSTATUS QxlDod::AddSingleTargetMode(_In_ CONST DXGK_VIDPNTARGETMODESET_INTERFACE* pVidPnTargetModeSetInterface,
                                                    D3DKMDT_HVIDPNTARGETMODESET hVidPnTargetModeSet,
@@ -849,16 +886,8 @@ NTSTATUS QxlDod::AddSingleTargetMode(_In_ CONST DXGK_VIDPNTARGETMODESET_INTERFAC
             DbgPrint(TRACE_LEVEL_ERROR, ("pfnCreateNewModeInfo failed with Status = 0x%X, hVidPnTargetModeSet = 0x%I64x", Status, hVidPnTargetModeSet));
             return Status;
         }
-        pVidPnTargetModeInfo->VideoSignalInfo.VideoStandard = D3DKMDT_VSS_OTHER;
-        pVidPnTargetModeInfo->VideoSignalInfo.TotalSize.cx = pModeInfo->VisScreenWidth;
-        pVidPnTargetModeInfo->VideoSignalInfo.TotalSize.cy = pModeInfo->VisScreenHeight;
-        pVidPnTargetModeInfo->VideoSignalInfo.ActiveSize = pVidPnTargetModeInfo->VideoSignalInfo.TotalSize;
-        pVidPnTargetModeInfo->VideoSignalInfo.VSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pVidPnTargetModeInfo->VideoSignalInfo.VSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pVidPnTargetModeInfo->VideoSignalInfo.HSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pVidPnTargetModeInfo->VideoSignalInfo.HSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pVidPnTargetModeInfo->VideoSignalInfo.PixelRate = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pVidPnTargetModeInfo->VideoSignalInfo.ScanLineOrdering = D3DDDI_VSSLO_PROGRESSIVE;
+        FillSignalInfo(pVidPnTargetModeInfo->VideoSignalInfo, pModeInfo, __FUNCTION__);
+
     // We add this as PREFERRED since it is the only supported target
         pVidPnTargetModeInfo->Preference = D3DKMDT_MP_NOTPREFERRED; // TODO: another logic for prefferred mode. Maybe the pinned source mode
 
@@ -900,16 +929,7 @@ NTSTATUS QxlDod::AddSingleMonitorMode(_In_ CONST DXGKARG_RECOMMENDMONITORMODES*
     pVbeModeInfo = m_pHWDevice->GetModeInfo(m_pHWDevice->GetCurrentModeIndex());
 
     // Since we don't know the real monitor timing information, just use the current display mode (from the POST device) with unknown frequencies
-    pMonitorSourceMode->VideoSignalInfo.VideoStandard = D3DKMDT_VSS_OTHER;
-    pMonitorSourceMode->VideoSignalInfo.TotalSize.cx = pVbeModeInfo->VisScreenWidth;
-    pMonitorSourceMode->VideoSignalInfo.TotalSize.cy = pVbeModeInfo->VisScreenHeight;
-    pMonitorSourceMode->VideoSignalInfo.ActiveSize = pMonitorSourceMode->VideoSignalInfo.TotalSize;
-    pMonitorSourceMode->VideoSignalInfo.VSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-    pMonitorSourceMode->VideoSignalInfo.VSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-    pMonitorSourceMode->VideoSignalInfo.HSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-    pMonitorSourceMode->VideoSignalInfo.HSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-    pMonitorSourceMode->VideoSignalInfo.PixelRate = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-    pMonitorSourceMode->VideoSignalInfo.ScanLineOrdering = D3DDDI_VSSLO_PROGRESSIVE;
+    FillSignalInfo(pMonitorSourceMode->VideoSignalInfo, pVbeModeInfo, __FUNCTION__);
 
     // We set the preference to PREFERRED since this is the only supported mode
     pMonitorSourceMode->Origin = D3DKMDT_MCO_DRIVER;
@@ -960,16 +980,7 @@ NTSTATUS QxlDod::AddSingleMonitorMode(_In_ CONST DXGKARG_RECOMMENDMONITORMODES*
                    pVbeModeInfo->VisScreenWidth, pVbeModeInfo->VisScreenHeight));
 
         // Since we don't know the real monitor timing information, just use the current display mode (from the POST device) with unknown frequencies
-        pMonitorSourceMode->VideoSignalInfo.VideoStandard = D3DKMDT_VSS_OTHER;
-        pMonitorSourceMode->VideoSignalInfo.TotalSize.cx = pVbeModeInfo->VisScreenWidth;
-        pMonitorSourceMode->VideoSignalInfo.TotalSize.cy = pVbeModeInfo->VisScreenHeight;
-        pMonitorSourceMode->VideoSignalInfo.ActiveSize = pMonitorSourceMode->VideoSignalInfo.TotalSize;
-        pMonitorSourceMode->VideoSignalInfo.VSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pMonitorSourceMode->VideoSignalInfo.VSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pMonitorSourceMode->VideoSignalInfo.HSyncFreq.Numerator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pMonitorSourceMode->VideoSignalInfo.HSyncFreq.Denominator = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pMonitorSourceMode->VideoSignalInfo.PixelRate = D3DKMDT_FREQUENCY_NOTSPECIFIED;
-        pMonitorSourceMode->VideoSignalInfo.ScanLineOrdering = D3DDDI_VSSLO_PROGRESSIVE;
+        FillSignalInfo(pMonitorSourceMode->VideoSignalInfo, pVbeModeInfo, __FUNCTION__);
 
         pMonitorSourceMode->Origin = D3DKMDT_MCO_DRIVER;
         pMonitorSourceMode->Preference = D3DKMDT_MP_NOTPREFERRED;
diff --git a/qxldod/QxlDod.h b/qxldod/QxlDod.h
index e782dfb..4598718 100755
--- a/qxldod/QxlDod.h
+++ b/qxldod/QxlDod.h
@@ -26,6 +26,8 @@
 
 #define QXL_NON_PAGED __declspec(code_seg(".text"))
 
+extern BOOLEAN g_bSupportVSync;
+
 typedef struct _QXL_FLAGS
 {
     UINT DriverStarted           : 1; // ( 1) 1 after StartDevice and 0 after StopDevice
-- 
2.7.0.windows.1