[Spice-devel] [PATCH spice-vdagent v7 1/3] file-xfer: Add support for sending detailed errors

Victor Toso victortoso at redhat.com
Mon Jun 5 08:10:19 UTC 2017


Hi,

On Sun, Jun 04, 2017 at 10:25:54PM +0200, Jakub Janků wrote:
> Generalize send_file_xfer_status() to send all file xfer statuses, not just
> errors.
>
> Change send_file_xfer_status() to support sending detailed file xfer status
> messages with additional error data.
> ---
>  configure.ac            |  2 +-
>  src/vdagentd/vdagentd.c | 60 ++++++++++++++++++++++++++++++++-----------------
>  2 files changed, 40 insertions(+), 22 deletions(-)
> 
> diff --git a/configure.ac b/configure.ac
> index 0c2cfd8..f207240 100644
> --- a/configure.ac
> +++ b/configure.ac
> @@ -79,7 +79,7 @@ AC_ARG_ENABLE([static-uinput],
>  
>  PKG_CHECK_MODULES([GLIB2], [glib-2.0 >= 2.28])
>  PKG_CHECK_MODULES(X, [xfixes xrandr >= 1.3 xinerama x11])
> -PKG_CHECK_MODULES(SPICE, [spice-protocol >= 0.12.8])
> +PKG_CHECK_MODULES(SPICE, [spice-protocol >= 0.12.13])
>  PKG_CHECK_MODULES(ALSA, [alsa >= 1.0.22])
>  PKG_CHECK_MODULES([DBUS], [dbus-1])
>  
> diff --git a/src/vdagentd/vdagentd.c b/src/vdagentd/vdagentd.c
> index f3ac606..64819d0 100644
> --- a/src/vdagentd/vdagentd.c
> +++ b/src/vdagentd/vdagentd.c
> @@ -301,20 +301,38 @@ static void do_client_clipboard(struct vdagent_virtio_port *vport,
>                  data, size);
>  }
>  
> -/* To be used by vdagentd for failures in file-xfer such as when file-xfer was
> - * cancelled or an error happened */
> +/* Send file-xfer status to the client. In the case status is an error,
> + * optional data for the client and log message may be specified. */
>  static void send_file_xfer_status(struct vdagent_virtio_port *vport,
> -                                  const char *msg, uint32_t id, uint32_t xfer_status)
> +                                  const char *msg, uint32_t id, uint32_t xfer_status,
> +                                  const uint8_t *data, uint32_t data_size)
>  {
> -    VDAgentFileXferStatusMessage status = {
> -        .id = GUINT32_TO_LE(id),
> -        .result = GUINT32_TO_LE(xfer_status),
> -    };
> -    syslog(LOG_WARNING, msg, id);
> +    VDAgentFileXferStatusMessage *status;
> +
> +    /* Replace new detailed errors with older generic VD_AGENT_FILE_XFER_STATUS_ERROR
> +     * when not supported by client */
> +    if (xfer_status > VD_AGENT_FILE_XFER_STATUS_SUCCESS &&
> +        !VD_AGENT_HAS_CAPABILITY(capabilities, capabilities_size,
> +                                 VD_AGENT_CAP_FILE_XFER_DETAILED_ERRORS)) {
> +        xfer_status = VD_AGENT_FILE_XFER_STATUS_ERROR;
> +        data_size = 0;
> +    }
> +
> +    status = malloc(sizeof(*status) + data_size);
> +    status->id = GUINT32_TO_LE(id);
> +    status->result = GUINT32_TO_LE(xfer_status);
> +    if (data)
> +        memcpy(status->data, data, data_size);
> +
> +    if (msg)
> +        syslog(LOG_WARNING, msg, id);
> +
>      if (vport)
>          vdagent_virtio_port_write(vport, VDP_CLIENT_PORT,
>                                    VD_AGENT_FILE_XFER_STATUS, 0,
> -                                  (uint8_t *)&status, sizeof(status));
> +                                  (uint8_t *)status, sizeof(*status) + data_size);
> +
> +    free(status);
>  }
>  
>  static void do_client_file_xfer(struct vdagent_virtio_port *vport,
> @@ -331,14 +349,14 @@ static void do_client_file_xfer(struct vdagent_virtio_port *vport,
>              send_file_xfer_status(vport,
>                 "Could not find an agent connection belonging to the "
>                 "active session, cancelling client file-xfer request %u",
> -               s->id, VD_AGENT_FILE_XFER_STATUS_CANCELLED);
> +               s->id, VD_AGENT_FILE_XFER_STATUS_CANCELLED, NULL, 0);
>              return;
>          } else if (session_info_session_is_locked(session_info)) {
>              syslog(LOG_DEBUG, "Session is locked, skipping file-xfer-start");
>              send_file_xfer_status(vport,
>                 "User's session is locked and cannot start file transfer. "
>                 "Cancelling client file-xfer request %u",
> -               s->id, VD_AGENT_FILE_XFER_STATUS_ERROR);
> +               s->id, VD_AGENT_FILE_XFER_STATUS_ERROR, NULL, 0);
>              return;
>          }
>          udscs_write(active_session_conn, VDAGENTD_FILE_XFER_START, 0, 0,
> @@ -810,7 +828,7 @@ static gboolean remove_active_xfers(gpointer key, gpointer value, gpointer conn)
>          send_file_xfer_status(virtio_port,
>                                "Agent disc; cancelling file-xfer %u",
>                                GPOINTER_TO_UINT(key),
> -                              VD_AGENT_FILE_XFER_STATUS_CANCELLED);
> +                              VD_AGENT_FILE_XFER_STATUS_CANCELLED, NULL, 0);
>          return 1;
>      } else
>          return 0;
> @@ -903,17 +921,17 @@ static void agent_read_complete(struct udscs_connection **connp,
>          }
>          break;
>      case VDAGENTD_FILE_XFER_STATUS:{
> -        VDAgentFileXferStatusMessage status;
> -        status.id = GUINT32_TO_LE(header->arg1);
> -        status.result = GUINT32_TO_LE(header->arg2);
> -        vdagent_virtio_port_write(virtio_port, VDP_CLIENT_PORT,
> -                                  VD_AGENT_FILE_XFER_STATUS, 0,
> -                                  (uint8_t *)&status, sizeof(status));
> -        if (status.result == VD_AGENT_FILE_XFER_STATUS_CAN_SEND_DATA)
> -            g_hash_table_insert(active_xfers, GUINT_TO_POINTER(status.id),
> +        /* header->arg1 = file xfer task id, header->arg2 = file xfer status */
> +        switch (header->arg2) {
> +            default:
> +                send_file_xfer_status(virtio_port, NULL, header->arg1, header->arg2, NULL, 0);
> +        }

A switch () with default only is a bit strange but I understand that
this is a preparatory patch for the following one. Works for me.

For the series,
Acked-by: Victor Toso <victortoso at redhat.com>

I'll add a reference to the bug number [0] in the commit log before
pushing (by the end of the day if nobody complains about it)

[0] https://bugs.freedesktop.org/show_bug.cgi?id=99982

Thanks again,
    toso

> +
> +        if (header->arg2 == VD_AGENT_FILE_XFER_STATUS_CAN_SEND_DATA)
> +            g_hash_table_insert(active_xfers, GUINT_TO_POINTER(GUINT32_TO_LE(header->arg1)),
>                                  *connp);
>          else
> -            g_hash_table_remove(active_xfers, GUINT_TO_POINTER(status.id));
> +            g_hash_table_remove(active_xfers, GUINT_TO_POINTER(GUINT32_TO_LE(header->arg1)));
>          break;
>      }
>  
> -- 
> 2.9.4
> 
> _______________________________________________
> Spice-devel mailing list
> Spice-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/spice-devel
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/spice-devel/attachments/20170605/3dba88ae/attachment.sig>


More information about the Spice-devel mailing list