[Spice-devel] [PATCH] drm/qxl: get vga ioports

[Gerd Hoffmann]

qxl has two modes: "native" (used by the drm driver) and "vga" (vga
compatibility mode, typically used for boot display and firmware
framebuffers).

Accessing any vga ioport will switch the qxl device into vga mode.
The qxl driver never does that, but other drivers accessing vga ports
can trigger that too and therefore disturb qxl operation.  So aquire
the legacy vga ioports from vgaarb to avoid that.

Reporducer: Boot kvm guest with both qxl and i915 vgpu, with qxl being
first in pci scan order.

Signed-off-by: Gerd Hoffmann <kraxel at redhat.com>
---
 drivers/gpu/drm/qxl/qxl_drv.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index b57a37543613..8a2e86adc423 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -87,9 +87,15 @@ qxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret)
 		goto disable_pci;
 
+	ret = vga_get_interruptible(pdev, VGA_RSRC_LEGACY_IO);
+	if (ret) {
+		DRM_ERROR("can't get legacy vga ports\n");
+		goto put_vga;
+	}
+
 	ret = qxl_device_init(qdev, &qxl_driver, pdev);
 	if (ret)
-		goto disable_pci;
+		goto put_vga;
 
 	ret = qxl_modeset_init(qdev);
 	if (ret)
@@ -109,6 +115,8 @@ qxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	qxl_modeset_fini(qdev);
 unload:
 	qxl_device_fini(qdev);
+put_vga:
+	vga_put(pdev, VGA_RSRC_LEGACY_IO);
 disable_pci:
 	pci_disable_device(pdev);
 free_dev:
@@ -126,6 +134,7 @@ qxl_pci_remove(struct pci_dev *pdev)
 
 	qxl_modeset_fini(qdev);
 	qxl_device_fini(qdev);
+	vga_put(pdev, VGA_RSRC_LEGACY_IO);
 
 	dev->dev_private = NULL;
 	kfree(qdev);
-- 
2.18.1