[Spice-devel] [PATCH 1/3] drm/qxl: add mode/framebuffer check functions
Frediano Ziglio
fziglio at redhat.com
Wed Jan 16 09:24:51 UTC 2019
>
> Add a helper functions to check video modes. Also add a helper to check
> framebuffer buffer objects, using the former for consistency. That way
> we should not fail in qxl_primary_atomic_check() because video modes
> which are too big will not be added to the mode list in the first place.
>
> Signed-off-by: Gerd Hoffmann <kraxel at redhat.com>
> ---
> drivers/gpu/drm/qxl/qxl_display.c | 37 +++++++++++++++++++------------------
> 1 file changed, 19 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/qxl/qxl_display.c
> b/drivers/gpu/drm/qxl/qxl_display.c
> index 1f8fddcc34..07a37d52c4 100644
> --- a/drivers/gpu/drm/qxl/qxl_display.c
> +++ b/drivers/gpu/drm/qxl/qxl_display.c
> @@ -191,6 +191,21 @@ void qxl_display_read_client_monitors_config(struct
> qxl_device *qdev)
> }
> }
>
> +static int qxl_check_mode(struct qxl_device *qdev,
> + unsigned int width,
> + unsigned int height)
> +{
> + if (width * height * 4 > qdev->vram_size)
Is someone checking for integer overflows already?
> + return -ENOMEM;
> + return 0;
> +}
> +
> +static int qxl_check_framebuffer(struct qxl_device *qdev,
> + struct qxl_bo *bo)
> +{
> + return qxl_check_mode(qdev, bo->surf.width, bo->surf.height);
> +}
> +
> static int qxl_add_monitors_config_modes(struct drm_connector *connector,
> unsigned *pwidth,
> unsigned *pheight)
> @@ -466,12 +481,7 @@ static int qxl_primary_atomic_check(struct drm_plane
> *plane,
>
> bo = gem_to_qxl_bo(state->fb->obj[0]);
>
> - if (bo->surf.stride * bo->surf.height > qdev->vram_size) {
> - DRM_ERROR("Mode doesn't fit in vram size (vgamem)");
> - return -EINVAL;
> - }
> -
> - return 0;
> + return qxl_check_framebuffer(qdev, bo);
> }
>
> static int qxl_primary_apply_cursor(struct drm_plane *plane)
> @@ -941,20 +951,11 @@ static enum drm_mode_status qxl_conn_mode_valid(struct
> drm_connector *connector,
> {
> struct drm_device *ddev = connector->dev;
> struct qxl_device *qdev = ddev->dev_private;
> - int i;
>
> - /* TODO: is this called for user defined modes? (xrandr --add-mode)
> - * TODO: check that the mode fits in the framebuffer */
> + if (qxl_check_mode(qdev, mode->hdisplay, mode->vdisplay) != 0)
> + return MODE_BAD;
>
> - if (qdev->monitors_config_width == mode->hdisplay &&
> - qdev->monitors_config_height == mode->vdisplay)
> - return MODE_OK;
> -
> - for (i = 0; i < ARRAY_SIZE(common_modes); i++) {
> - if (common_modes[i].w == mode->hdisplay && common_modes[i].h ==
> mode->vdisplay)
> - return MODE_OK;
> - }
> - return MODE_BAD;
> + return MODE_OK;
> }
>
> static struct drm_encoder *qxl_best_encoder(struct drm_connector *connector)
Frediano
More information about the Spice-devel
mailing list