[Spice-devel] [PATCH v4 10/10] drm/fb_helper: Support framebuffers in I/O memory
Thomas Zimmermann
tzimmermann at suse.de
Fri Oct 16 11:34:40 UTC 2020
Hi
On Fri, 16 Oct 2020 12:58:54 +0200 Sam Ravnborg <sam at ravnborg.org> wrote:
> Hi Thomas.
>
> On Thu, Oct 15, 2020 at 02:38:06PM +0200, Thomas Zimmermann wrote:
> > At least sparc64 requires I/O-specific access to framebuffers. This
> > patch updates the fbdev console accordingly.
> >
> > For drivers with direct access to the framebuffer memory, the callback
> > functions in struct fb_ops test for the type of memory and call the rsp
> > fb_sys_ of fb_cfb_ functions.
> >
> > For drivers that employ a shadow buffer, fbdev's blit function retrieves
> > the framebuffer address as struct dma_buf_map, and uses dma_buf_map
> > interfaces to access the buffer.
> >
> > The bochs driver on sparc64 uses a workaround to flag the framebuffer as
> > I/O memory and avoid a HW exception. With the introduction of struct
> > dma_buf_map, this is not required any longer. The patch removes the rsp
> > code from both, bochs and fbdev.
> >
> > v4:
> > * move dma_buf_map changes into separate patch (Daniel)
> > * TODO list: comment on fbdev updates (Daniel)
>
> I have been offline for a while so have not followed all the threads on
> this. So may comments below may well be addressed but I failed to see
> it.
>
> If the point about fb_sync is already addressed/considered then:
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
It has not been brought up yet. See below.
>
>
> > Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
> > ---
> > Documentation/gpu/todo.rst | 19 ++-
> > drivers/gpu/drm/bochs/bochs_kms.c | 1 -
> > drivers/gpu/drm/drm_fb_helper.c | 217 ++++++++++++++++++++++++++++--
> > include/drm/drm_mode_config.h | 12 --
> > 4 files changed, 220 insertions(+), 29 deletions(-)
> >
> > diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
> > index 7e6fc3c04add..638b7f704339 100644
> > --- a/Documentation/gpu/todo.rst
> > +++ b/Documentation/gpu/todo.rst
> > @@ -197,13 +197,28 @@ Convert drivers to use drm_fbdev_generic_setup()
> > ------------------------------------------------
> >
> > Most drivers can use drm_fbdev_generic_setup(). Driver have to implement
> > -atomic modesetting and GEM vmap support. Current generic fbdev emulation
> > -expects the framebuffer in system memory (or system-like memory).
> > +atomic modesetting and GEM vmap support. Historically, generic fbdev
> > emulation +expected the framebuffer in system memory or system-like
> > memory. By employing +struct dma_buf_map, drivers with frambuffers in I/O
> > memory can be supported +as well.
> >
> > Contact: Maintainer of the driver you plan to convert
> >
> > Level: Intermediate
> >
> > +Reimplement functions in drm_fbdev_fb_ops without fbdev
> > +-------------------------------------------------------
> > +
> > +A number of callback functions in drm_fbdev_fb_ops could benefit from
> > +being rewritten without dependencies on the fbdev module. Some of the
> > +helpers could further benefit from using struct dma_buf_map instead of
> > +raw pointers.
> > +
> > +Contact: Thomas Zimmermann <tzimmermann at suse.de>, Daniel Vetter
> > +
> > +Level: Advanced
> > +
> > +
> > drm_framebuffer_funcs and drm_mode_config_funcs.fb_create cleanup
> > -----------------------------------------------------------------
> >
> > diff --git a/drivers/gpu/drm/bochs/bochs_kms.c
> > b/drivers/gpu/drm/bochs/bochs_kms.c index 13d0d04c4457..853081d186d5
> > 100644 --- a/drivers/gpu/drm/bochs/bochs_kms.c
> > +++ b/drivers/gpu/drm/bochs/bochs_kms.c
> > @@ -151,7 +151,6 @@ int bochs_kms_init(struct bochs_device *bochs)
> > bochs->dev->mode_config.preferred_depth = 24;
> > bochs->dev->mode_config.prefer_shadow = 0;
> > bochs->dev->mode_config.prefer_shadow_fbdev = 1;
> > - bochs->dev->mode_config.fbdev_use_iomem = true;
> > bochs->dev->mode_config.quirk_addfb_prefer_host_byte_order =
> > true;
> > bochs->dev->mode_config.funcs = &bochs_mode_funcs;
> Good to see this workaround gone again!
>
> > diff --git a/drivers/gpu/drm/drm_fb_helper.c
> > b/drivers/gpu/drm/drm_fb_helper.c index 6212cd7cde1d..462b0c130ebb 100644
> > --- a/drivers/gpu/drm/drm_fb_helper.c
> > +++ b/drivers/gpu/drm/drm_fb_helper.c
> > @@ -372,24 +372,22 @@ static void drm_fb_helper_resume_worker(struct
> > work_struct *work) }
> >
> > static void drm_fb_helper_dirty_blit_real(struct drm_fb_helper
> > *fb_helper,
> > - struct drm_clip_rect *clip)
> > + struct drm_clip_rect *clip,
> > + struct dma_buf_map *dst)
> > {
> > struct drm_framebuffer *fb = fb_helper->fb;
> > unsigned int cpp = fb->format->cpp[0];
> > size_t offset = clip->y1 * fb->pitches[0] + clip->x1 * cpp;
> > void *src = fb_helper->fbdev->screen_buffer + offset;
> > - void *dst = fb_helper->buffer->map.vaddr + offset;
> > size_t len = (clip->x2 - clip->x1) * cpp;
> > unsigned int y;
> >
> > - for (y = clip->y1; y < clip->y2; y++) {
> > - if (!fb_helper->dev->mode_config.fbdev_use_iomem)
> > - memcpy(dst, src, len);
> > - else
> > - memcpy_toio((void __iomem *)dst, src, len);
> > + dma_buf_map_incr(dst, offset); /* go to first pixel within clip
> > rect */
> > + for (y = clip->y1; y < clip->y2; y++) {
> > + dma_buf_map_memcpy_to(dst, src, len);
> > + dma_buf_map_incr(dst, fb->pitches[0]);
> > src += fb->pitches[0];
> > - dst += fb->pitches[0];
> > }
> > }
> >
> > @@ -417,8 +415,9 @@ static void drm_fb_helper_dirty_work(struct
> > work_struct *work) ret = drm_client_buffer_vmap(helper->buffer, &map);
> > if (ret)
> > return;
> > - drm_fb_helper_dirty_blit_real(helper,
> > &clip_copy);
> > + drm_fb_helper_dirty_blit_real(helper,
> > &clip_copy, &map); }
> > +
> > if (helper->fb->funcs->dirty)
> > helper->fb->funcs->dirty(helper->fb, NULL, 0, 0,
> > &clip_copy, 1);
> > @@ -755,6 +754,136 @@ void drm_fb_helper_sys_imageblit(struct fb_info
> > *info, }
> > EXPORT_SYMBOL(drm_fb_helper_sys_imageblit);
> >
> So far everything looks good.
>
> > +static ssize_t drm_fb_helper_cfb_read(struct fb_info *info, char __user
> > *buf,
> > + size_t count, loff_t *ppos)
> > +{
> > + unsigned long p = *ppos;
> > + u8 *dst;
> > + u8 __iomem *src;
> > + int c, err = 0;
> > + unsigned long total_size;
> > + unsigned long alloc_size;
> > + ssize_t ret = 0;
> > +
> > + if (info->state != FBINFO_STATE_RUNNING)
> > + return -EPERM;
> > +
> > + total_size = info->screen_size;
> > +
> > + if (total_size == 0)
> > + total_size = info->fix.smem_len;
> > +
> > + if (p >= total_size)
> > + return 0;
> > +
> > + if (count >= total_size)
> > + count = total_size;
> > +
> > + if (count + p > total_size)
> > + count = total_size - p;
> > +
> > + src = (u8 __iomem *)(info->screen_base + p);
> screen_base is a char __iomem * - so this cast looks semi redundant.
I took the basic code from fbdev. Maybe there's a reason for the case,
otherwise I'll remove it.
>
> > +
> > + alloc_size = min(count, PAGE_SIZE);
> > +
> > + dst = kmalloc(alloc_size, GFP_KERNEL);
> > + if (!dst)
> > + return -ENOMEM;
> > +
> Same comment as below about fb_sync.
>
>
> > + while (count) {
> > + c = min(count, alloc_size);
> > +
> > + memcpy_fromio(dst, src, c);
> > + if (copy_to_user(buf, dst, c)) {
> > + err = -EFAULT;
> > + break;
> > + }
> > +
> > + src += c;
> > + *ppos += c;
> > + buf += c;
> > + ret += c;
> > + count -= c;
> > + }
> > +
> > + kfree(dst);
> > +
> > + if (err)
> > + return err;
> > +
> > + return ret;
> > +}
> > +
> > +static ssize_t drm_fb_helper_cfb_write(struct fb_info *info, const char
> > __user *buf,
> > + size_t count, loff_t *ppos)
> > +{
> > + unsigned long p = *ppos;
> > + u8 *src;
> > + u8 __iomem *dst;
> > + int c, err = 0;
> > + unsigned long total_size;
> > + unsigned long alloc_size;
> > + ssize_t ret = 0;
> > +
> > + if (info->state != FBINFO_STATE_RUNNING)
> > + return -EPERM;
> > +
> > + total_size = info->screen_size;
> > +
> > + if (total_size == 0)
> > + total_size = info->fix.smem_len;
> > +
> > + if (p > total_size)
> > + return -EFBIG;
> > +
> > + if (count > total_size) {
> > + err = -EFBIG;
> > + count = total_size;
> > + }
> > +
> > + if (count + p > total_size) {
> > + /*
> > + * The framebuffer is too small. We do the
> > + * copy operation, but return an error code
> > + * afterwards. Taken from fbdev.
> > + */
> > + if (!err)
> > + err = -ENOSPC;
> > + count = total_size - p;
> > + }
> > +
> > + alloc_size = min(count, PAGE_SIZE);
> > +
> > + src = kmalloc(alloc_size, GFP_KERNEL);
> > + if (!src)
> > + return -ENOMEM;
> > +
> > + dst = (u8 __iomem *)(info->screen_base + p);
> > +
>
> The fbdev variant call the fb_sync callback here.
> noveau and gma500 implments the fb_sync callback - but no-one else.
These drivers implement some form of HW acceleration. If they have a HW
blit/draw/etc op queued up, they have to wait for it to complete. Otherwise,
the copied memory would contain an old state. The fb_sync acts as the fence.
Fbdev only uses software copying, so the fb_sync is not required.
From what I heard, the HW acceleration is not useful on modern machines. I
hope to convert more drivers to generic fbdev after these patches for
I/O-memory support have been merged.
>
>
> > + while (count) {
> > + c = min(count, alloc_size);
> > +
> > + if (copy_from_user(src, buf, c)) {
> > + err = -EFAULT;
> > + break;
> > + }
> > + memcpy_toio(dst, src, c);
> When we rewrite this part to use dma_buf_map_memcpy_to() then we can
> merge the two variants of helper_{sys,cfb}_read()?
> Which is part of the todo - so OK
I'm not sure if dma_buf_map is a good fit here. The I/O-memory function does
an additional copy between system memory and I/O memory. Of course, the top
and bottom of both functions are similar and could probably be shared.
Best regards
Thomas
> > +
> > + dst += c;
> > + *ppos += c;
> > + buf += c;
> > + ret += c;
> > + count -= c;
> > + }
> > +
> > + kfree(src);
> > +
> > + if (err)
> > + return err;
> > +
> > + return ret;
> > +}
> > +
> > /**
> > * drm_fb_helper_cfb_fillrect - wrapper around cfb_fillrect
> > * @info: fbdev registered by the helper
> > @@ -2027,6 +2156,66 @@ static int drm_fbdev_fb_mmap(struct fb_info *info,
> > struct vm_area_struct *vma) return -ENODEV;
> > }
> >
> > +static ssize_t drm_fbdev_fb_read(struct fb_info *info, char __user *buf,
> > + size_t count, loff_t *ppos)
> > +{
> > + struct drm_fb_helper *fb_helper = info->par;
> > + struct drm_client_buffer *buffer = fb_helper->buffer;
> > +
> > + if (drm_fbdev_use_shadow_fb(fb_helper) || !buffer->map.is_iomem)
> > + return drm_fb_helper_sys_read(info, buf, count, ppos);
> > + else
> > + return drm_fb_helper_cfb_read(info, buf, count, ppos);
> > +}
> > +
> > +static ssize_t drm_fbdev_fb_write(struct fb_info *info, const char
> > __user *buf,
> > + size_t count, loff_t *ppos)
> > +{
> > + struct drm_fb_helper *fb_helper = info->par;
> > + struct drm_client_buffer *buffer = fb_helper->buffer;
> > +
> > + if (drm_fbdev_use_shadow_fb(fb_helper) || !buffer->map.is_iomem)
> > + return drm_fb_helper_sys_write(info, buf, count, ppos);
> > + else
> > + return drm_fb_helper_cfb_write(info, buf, count, ppos);
> > +}
> > +
> > +static void drm_fbdev_fb_fillrect(struct fb_info *info,
> > + const struct fb_fillrect *rect)
> > +{
> > + struct drm_fb_helper *fb_helper = info->par;
> > + struct drm_client_buffer *buffer = fb_helper->buffer;
> > +
> > + if (drm_fbdev_use_shadow_fb(fb_helper) || !buffer->map.is_iomem)
> > + drm_fb_helper_sys_fillrect(info, rect);
> > + else
> > + drm_fb_helper_cfb_fillrect(info, rect);
> > +}
> > +
> > +static void drm_fbdev_fb_copyarea(struct fb_info *info,
> > + const struct fb_copyarea *area)
> > +{
> > + struct drm_fb_helper *fb_helper = info->par;
> > + struct drm_client_buffer *buffer = fb_helper->buffer;
> > +
> > + if (drm_fbdev_use_shadow_fb(fb_helper) || !buffer->map.is_iomem)
> > + drm_fb_helper_sys_copyarea(info, area);
> > + else
> > + drm_fb_helper_cfb_copyarea(info, area);
> > +}
> > +
> > +static void drm_fbdev_fb_imageblit(struct fb_info *info,
> > + const struct fb_image *image)
> > +{
> > + struct drm_fb_helper *fb_helper = info->par;
> > + struct drm_client_buffer *buffer = fb_helper->buffer;
> > +
> > + if (drm_fbdev_use_shadow_fb(fb_helper) || !buffer->map.is_iomem)
> > + drm_fb_helper_sys_imageblit(info, image);
> > + else
> > + drm_fb_helper_cfb_imageblit(info, image);
> > +}
> > +
> > static const struct fb_ops drm_fbdev_fb_ops = {
> > .owner = THIS_MODULE,
> > DRM_FB_HELPER_DEFAULT_OPS,
> > @@ -2034,11 +2223,11 @@ static const struct fb_ops drm_fbdev_fb_ops = {
> > .fb_release = drm_fbdev_fb_release,
> > .fb_destroy = drm_fbdev_fb_destroy,
> > .fb_mmap = drm_fbdev_fb_mmap,
> > - .fb_read = drm_fb_helper_sys_read,
> > - .fb_write = drm_fb_helper_sys_write,
> > - .fb_fillrect = drm_fb_helper_sys_fillrect,
> > - .fb_copyarea = drm_fb_helper_sys_copyarea,
> > - .fb_imageblit = drm_fb_helper_sys_imageblit,
> > + .fb_read = drm_fbdev_fb_read,
> > + .fb_write = drm_fbdev_fb_write,
> > + .fb_fillrect = drm_fbdev_fb_fillrect,
> > + .fb_copyarea = drm_fbdev_fb_copyarea,
> > + .fb_imageblit = drm_fbdev_fb_imageblit,
> > };
> >
> > static struct fb_deferred_io drm_fbdev_defio = {
> > diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h
> > index 5ffbb4ed5b35..ab424ddd7665 100644
> > --- a/include/drm/drm_mode_config.h
> > +++ b/include/drm/drm_mode_config.h
> > @@ -877,18 +877,6 @@ struct drm_mode_config {
> > */
> > bool prefer_shadow_fbdev;
> >
> > - /**
> > - * @fbdev_use_iomem:
> > - *
> > - * Set to true if framebuffer reside in iomem.
> > - * When set to true memcpy_toio() is used when copying the
> > framebuffer in
> > - * drm_fb_helper.drm_fb_helper_dirty_blit_real().
> > - *
> > - * FIXME: This should be replaced with a per-mapping is_iomem
> > - * flag (like ttm does), and then used everywhere in fbdev code.
> > - */
> > - bool fbdev_use_iomem;
> > -
> > /**
> > * @quirk_addfb_prefer_xbgr_30bpp:
> > *
> > --
> > 2.28.0
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
(HRB 36809, AG Nürnberg)
Geschäftsführer: Felix Imendörffer
More information about the Spice-devel
mailing list