[Spice-devel] [PATCH] drm/qxl: fix the suspend/resume issue on qxl device
Zongmin Zhou
min_halo at 163.com
Wed Sep 7 09:44:23 UTC 2022
From: Zongmin Zhou <zhouzongmin at kylinos.cn>
Details:
Currently, when trying to suspend and resume with qxl deviceï¼
there are some error messages after resuming,
eventually caused to black screen and can't be recovered.
The first error message:
[ 64.668577][ C3] [drm] driver is in bug mode
This error is due to guest qxl driver
will call qxl_reinit_memslots(qdev) during system resume,
but didn't call qxl_io_reset(qdev) before this,
Then will cause the QXL_IO_MEMSLOT_ADD operation to fail on QEMU,
qxl->guest_bug flag will be setï¼As a result,
the QXL device can't communicate with guest qxl driver through the IO port.
after fix the first error,can success to resume and login to desktop,
but shortly after that will observe the second error message :
[ 353.095343][ T863] qxl 0000:00:02.0: object_init failed for (262144, 0x00000001)
[ 353.096660][ T863] [drm:qxl_gem_object_create [qxl]] *ERROR* Failed to allocate GEM object (260852, 1, 4096, -12)
[ 353.097277][ T863] [drm:qxl_alloc_ioctl [qxl]] *ERROR* qxl_alloc_ioctl: failed to create gem ret=-12
[ 368.197538][ T863] qxl 0000:00:02.0: object_init failed for (3149824, 0x00000001)
[ 368.197541][ T863] [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO
The problem is caused by calling qxl_ring_init_hdr(qdev->release_ring)
in qxl_drm_resume() function.
When do QXL_IO_RESET,QEMU will call init_qxl_ram(),
so params like prod,cons,notify_on_cons and notify_on_prod
will be set to default value.
Ring push/pop actions for release_ring can be performed normally.
But call qxl_ring_init_hdr(qdev->release_ring)
will eventually set notify_on_prod to number of QXL_RELEASE_RING_SIZE,
affect the value of notify in qxl_push_free_res() function always be false,
QEMU will no longer send events of QXL_INTERRUPT_DISPLAY to the
guest qxl driverï¼so qxl_ring_pop() will never been called anymoreï¼
and can't do dma_fence_signal(),result to ttm_bo_wait_ctx(bo, ctx)
always return EBUSY,fail to call qxl_bo_create().
Test scenario:
1) start virtual machine with qemu command "-device qxl-vga"
2) click suspend botton to enter suspend mode
3) resume and observe the error message in kernel logs,screen will be black
Let's fix this by reset io and remove the qxl_ring_init_hdr calling.
Signed-off-by: Zongmin Zhou<zhouzongmin at kylinos.cn>
Suggested-by: Ming Xie<xieming at kylinos.cn>
---
drivers/gpu/drm/qxl/qxl_drv.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index 1cb6f0c224bb..3044ca948ce2 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -194,7 +194,6 @@ static int qxl_drm_resume(struct drm_device *dev, bool thaw)
qdev->ram_header->int_mask = QXL_INTERRUPT_MASK;
if (!thaw) {
qxl_reinit_memslots(qdev);
- qxl_ring_init_hdr(qdev->release_ring);
}
qxl_create_monitors_object(qdev);
@@ -220,6 +219,7 @@ static int qxl_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *drm_dev = pci_get_drvdata(pdev);
+ struct qxl_device *qdev = to_qxl(drm_dev);
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
@@ -227,6 +227,7 @@ static int qxl_pm_resume(struct device *dev)
return -EIO;
}
+ qxl_io_reset(qdev);
return qxl_drm_resume(drm_dev, false);
}
--
2.25.1
-------------- next part --------------
Content-type: Text/plain
No virus found
Checked by Hillstone Network AntiVirus
More information about the Spice-devel
mailing list