[systemd-bugs] [Bug 82258] A lot of massages in logind after boot or in term after every hardware event.
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Wed Aug 6 11:04:09 PDT 2014
https://bugs.freedesktop.org/show_bug.cgi?id=82258
Александр <Alex.Armoken at gmail.com> changed:
What |Removed |Added
----------------------------------------------------------------------------
Attachment #104164|Example of massages |Example of messages
description| |
--- Comment #1 from Александр <Alex.Armoken at gmail.com> ---
Comment on attachment 104164
--> https://bugs.freedesktop.org/attachment.cgi?id=104164
Example of messages
>*** End of the configuration.
>*** Execute 'make' to start the build or try 'make help'.
>
>* >> Compiling 3.12.21-gentoo-r1 bzImage...
>* >> Not installing firmware as it's included in the kernel already (CONFIG_FIRMWARE_IN_KERNEL=y)...
>* >> Compiling 3.12.21-gentoo-r1 modules...
>* >> Generating module dependency data...
>* Copying config for successful build to /etc/kernels/kernel-config-x86_64-3.12.21-gentoo-r1
>* busybox: >> Using cache
>* initramfs: >> Initializing...
>* >> Appending base_layout cpio data...
>* >> Appending udev cpio data...
>cp: cannot stat â– /etc/modprobe.d/blacklist.confâ– : No such file or directory
>* cannot copy /etc/modprobe.d/blacklist.conf from udev
>cp: cannot stat â– /lib/systemd/network/99-default.linkâ– : No such file or directory
>* cannot copy /lib/systemd/network/99-default.link from udev
>* >> Appending auxilary cpio data...
>* >> Copying keymaps
>* >> Appending busybox cpio data...
>* >> Appending modules cpio data...
>* >> Appending blkid cpio data...
>* >> Appending ld_so_conf cpio data...
>* ldconfig: adding /sbin/ldconfig...
>* ld.so.conf: adding /etc/ld.so.conf{.d/*,}...
>cpio: lib64 not created: newer or same age version exists
>cpio: lib64 not created: newer or same age version exists
>cpio: lib64/libuuid.so.1 not created: newer or same age version exists
>cpio: lib64/ld-linux-x86-64.so.2 not created: newer or same age version exists
>cpio: lib64/libc.so.6 not created: newer or same age version exists
>cpio: lib64/libblkid.so.1 not created: newer or same age version exists
>* >> Finalizing cpio...
>* >> Compressing cpio data (.xz)...
>*
>* Kernel compiled successfully!
>*
>* Required Kernel Parameters:
>* root=/dev/$ROOT
>*
>* Where $ROOT is the device node for your root partition as the
>* one specified in /etc/fstab
>*
>* If you require Genkernel's hardware detection features; you MUST
>* tell your bootloader to use the provided INITRAMFS file.
>
>* WARNING... WARNING... WARNING...
>* Additional kernel cmdline arguments that *may* be required to boot properly...
>* With support for several ext* filesystems available, it may be needed to
>* add "rootfstype=ext3" or "rootfstype=ext4" to the list of boot parameters.
>
>* Do NOT report kernel bugs as genkernel bugs unless your bug
>* is about the default genkernel configuration...
>*
>* Make sure you have the latest ~arch genkernel before reporting bugs.
>
>
>
>
>
>
>
>
>
>r8169 0000:08:00.0 enp8s0: link up
>IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
>
>
>
>
>
>
>Generating grub.cfg ...
>Found linux image: /boot/kernel-genkernel-x86_64-3.12.21-gentoo-r1
>Found initrd image: /boot/initramfs-genkernel-x86_64-3.12.21-gentoo-r1
> No volume groups found
>EXT3-fs (sda3): error: unable to read superblock
>EXT2-fs (sda3): error: unable to read superblock
>EXT4-fs (sda3): unable to read superblock
>FAT-fs (sda3): bogus number of reserved sectors
>FAT-fs (sda3): Can't find a valid FAT filesystem
>FAT-fs (sda3): bogus number of reserved sectors
>FAT-fs (sda3): Can't find a valid FAT filesystem
>isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
>UDF-fs: error (device sda3): udf_read_tagged: read failed, block=256, location=256
>UDF-fs: error (device sda3): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
>UDF-fs: error (device sda3): udf_read_tagged: read failed, block=512, location=512
>UDF-fs: error (device sda3): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
>UDF-fs: error (device sda3): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
>UDF-fs: warning (device sda3): udf_load_vrs: No anchor found
>UDF-fs: Rescanning with blocksize 2048
>UDF-fs: error (device sda3): udf_read_tagged: read failed, block=256, location=256
>UDF-fs: error (device sda3): udf_read_tagged: read failed, block=512, location=512
>UDF-fs: warning (device sda3): udf_load_vrs: No anchor found
>UDF-fs: warning (device sda3): udf_fill_super: No partition found (1)
>Found Windows 7 (loader) on /dev/sda2
>done
>
>
>
>
>
> sudo blkid
>/dev/sda6: UUID="21a112bb-fc7d-4940-ab6f-a58c4f412f59" TYPE="ext4" PARTUUID="00013d45-06"
>/dev/sda1: UUID="ca10acb0-44f7-4a7f-bd18-efcf5eb86b89" TYPE="ext4" PARTUUID="00013d45-01"
>/dev/sda2: UUID="ECAA946FAA943852" TYPE="ntfs" PARTUUID="00013d45-02"
>/dev/sda5: UUID="585c1195-df9a-4506-8879-0f594ae3d1ec" TYPE="swap" PARTUUID="00013d45-05"
>/dev/sda7: UUID="899416ff-1ef4-49fd-b9ff-e0cb3b42b123" TYPE="ext4" PARTUUID="00013d45-07"
>/dev/sda8: UUID="a263fb3d-cf36-4f0a-bc01-bf9453311da9" TYPE="ext4" PARTUUID="00013d45-08"
>/dev/sda9: UUID="f44943c5-3391-41ee-956b-89fb2d4102f7" TYPE="ext4" PARTUUID="00013d45-09"
>/dev/sdc1: UUID="4341-FA8F" TYPE="vfat" PARTUUID="3b6906fe-b843-49ce-9e65-8dc12e3919ef"
>armoken at armoken-laptop ~ $ fdisk -l /dev/sda
>-bash: fdisk: command not found
>armoken at armoken-laptop ~ $ sudo fdisk -l /dev/sda
>
>Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
>Units: sectors of 1 * 512 = 512 bytes
>Sector size (logical/physical): 512 bytes / 4096 bytes
>I/O size (minimum/optimal): 4096 bytes / 4096 bytes
>Disklabel type: dos
>Disk identifier: 0x00013d45
>Partition 1 does not start on physical sector boundary.
>
>Device Boot Start End Blocks Id System
>/dev/sda1 * 63 1992059 995998+ 7 HPFS/NTFS/exFAT
>/dev/sda2 1992704 101996543 50001920 7 HPFS/NTFS/exFAT
>/dev/sda3 101996544 1953523711 925763584 5 Extended
>/dev/sda5 101998592 110387199 4194304 83 Linux
>/dev/sda6 110389248 183789567 36700160 83 Linux
>/dev/sda7 183791616 257191935 36700160 83 Linux
>/dev/sda8 257193984 1305769983 524288000 83 Linux
>/dev/sda9 1305772032 1953523711 323875840 83 Linux
>
>armoken at armoken-laptop ~ $ grep -v "#\|^$" /etc/fstab
>/dev/sda1 /boot ext4 defaults,noatime 0 2
>/dev/sda6 / ext4 noatime 0 1
>/dev/sda5 none swap sw 0 0
>/dev/sda7 /home ext4 defaults 0 0
>/dev/sda8 /mnt/all ext4 defaults 0 0
>/dev/sda9 /mnt/films ext4 defaults 0 0
>/dev/sda2 /windows ntfs defaults 0 0
>
>
>
>
>GRUB_DISTRIBUTOR="Gentoo"
>
>GRUB_DEFAULT=0
>GRUB_HIDDEN_TIMEOUT=0
>GRUB_HIDDEN_TIMEOUT_QUIET=true
>GRUB_TIMEOUT=10
>
># Append parameters to the linux kernel command line
>GRUB_CMDLINE_LINUX="init=/usr/lib/systemd/systemd"
>
># Append parameters to the linux kernel command line for non-recovery entries
>GRUB_CMDLINE_LINUX_DEFAULT="video=uvesafb:mtrr:3,ywrap,1366x768-32 at 75"
>
># Uncomment to disable graphical terminal (grub-pc only)
>#GRUB_TERMINAL=console
>
># The resolution used on graphical terminal.
># Note that you can use only modes which your graphic card supports via VBE.
># You can see them in real GRUB with the command `vbeinfo'.
>#GRUB_GFXMODE=640x480
>
># Path to theme spec txt file.
># The starfield is by default provided with use truetype.
># NOTE: when enabling custom theme, ensure you have required font/etc.
>#GRUB_THEME="/boot/grub/themes/starfield/theme.txt"
>
># Background image used on graphical terminal.
># Can be in various bitmap formats.
>#GRUB_BACKGROUND="/boot/grub/mybackground.png"
>
># Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to kernel
>#GRUB_DISABLE_LINUX_UUID=true
># Uncomment to disable generation of recovery mode menu entries
>#GRUB_DISABLE_RECOVERY=true
>
>
>
>
>This is armoken-laptop. Now 22:04:57 Mon Aug 4 2014
>
>armoken-laptop login: r8169 0000:08:00.0 enp8s0: link down
>r8169 0000:08:00.0 enp8s0: link down
>IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
>iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
>iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
>IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
>r8169 0000:08:00.0 enp8s0: link up
>IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
>usb 1-2: new high-speed USB device number 5 using xhci_hcd
>usb 1-2: New USB device found, idVendor=0951, idProduct=1624
>usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>usb 1-2: Product: DataTraveler G2
>usb 1-2: Manufacturer: Kingston
>usb 1-2: SerialNumber: 001CC0EC34D1F9C126A00CB4
>usb 1-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
>usb 1-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
>usb-storage 1-2:1.0: USB Mass Storage device detected
>scsi5 : usb-storage 1-2:1.0
>scsi 5:0:0:0: Direct-Access Kingston DataTraveler G2 1.00 PQ: 0 ANSI: 2
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:0: [sdb] 31252024 512-byte logical blocks: (16.0 GB/14.9 GiB)
>sd 5:0:0:0: [sdb] Write Protect is off
>sd 5:0:0:0: [sdb] Incomplete mode parameter data
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] Incomplete mode parameter data
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
> sdb: sdb1
>sd 5:0:0:0: [sdb] Incomplete mode parameter data
>sd 5:0:0:0: [sdb] Assuming drive cache: write through
>sd 5:0:0:0: [sdb] Attached SCSI removable disk
>armoken
>Password:
>Last login: Mon Aug 4 21:41:25 FET 2014 on tty1
>
>
>
># This file is part of systemd.
>#
># systemd is free software; you can redistribute it and/or modify it
># under the terms of the GNU Lesser General Public License as published by
># the Free Software Foundation; either version 2.1 of the License, or
># (at your option) any later version.
>#
># See journald.conf(5) for details
>
>[Journal]
>Storage=auto
>Compress=no
>Seal=yes
>#SplitMode=uid
>#SyncIntervalSec=5m
>#RateLimitInterval=30s
>#RateLimitBurst=1000
>SystemMaxUse=100M
>#SystemKeepFree=
>#SystemMaxFileSize=
>#RuntimeMaxUse=
>#RuntimeKeepFree=
>#RuntimeMaxFileSize=
>#MaxRetentionSec=
>#MaxFileSec=1month
>ForwardToSyslog=no
>ForwardToKMsg=no
>ForwardToConsole=yes
>ForwardToWall=no
>TTYPath=/dev/tty12
>#MaxLevelStore=debug
>#MaxLevelSyslog=debug
>#MaxLevelKMsg=notice
>MaxLevelConsole=notice
>#MaxLevelWall=emerg
>
>
>
>
>
>[ 6.721583] input: PC Speaker as /devices/platform/pcspkr/input/input12
>[ 6.732756] ACPI Warning: SystemIO range 0x0000000000006040-0x000000000000605f conflicts with OpRegion 0x0000000000006040-0x000000000000604f (\_SB_.PCI0.SBUS.SMBI) (20131218/utaddress-258)
>[ 6.732845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
>[ 6.758698] r8169 0000:08:00.0 eth0: link down
>[ 6.758710] r8169 0000:08:00.0 eth0: link down
>[ 6.758721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>[ 6.862348] iwlwifi 0000:09:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm
>[ 6.862357] iwlwifi 0000:09:00.0: Detected Intel(R) Wireless N 7260, REV=0x144
>[ 6.862404] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
>[ 6.862632] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
>[ 6.994724] nvidia: module license 'NVIDIA' taints kernel.
>[ 6.994749] Disabling lock debugging due to kernel taint
>[ 7.004155] nvidia 0000:07:00.0: enabling device (0006 -> 0007)
>[ 7.004479] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:07:00.0 on minor 1
>[ 7.004484] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.24 Wed Jul 2 14:24:20 PDT 2014
>[ 7.056811] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
>[ 7.066385] nvidia 0000:07:00.0: irq 51 for MSI/MSI-X
>[ 7.068907] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.068994] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.069060] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.069134] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.069199] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.069262] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.069343] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.069408] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>[ 7.108104] systemd-udevd[2142]: renamed network interface wlan0 to wlp9s0
>[ 7.134276] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
>[ 7.134509] iwlwifi 0000:09:00.0: L1 Disabled; Enabling L0S
>[ 7.146050] IPv6: ADDRCONF(NETDEV_UP): wlp9s0: link is not ready
>[ 8.467737] r8169 0000:08:00.0 eth0: link up
>[ 8.467744] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[ 11.218236] ACPI Warning: \_SB_.PCI0.PEG1.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131218/nsarguments-95)
>
--
You are receiving this mail because:
You are the QA Contact for the bug.
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/systemd-bugs/attachments/20140806/3a670af3/attachment-0001.html>
More information about the systemd-bugs
mailing list