[systemd-devel] Systemd segv during boot
Nicolas Aguirre
aguirre.nicolas at gmail.com
Mon Sep 3 02:59:16 PDT 2012
Hi
I'm using Angstrom and systemd (v44) on an ARM custom board. (TI OMAP3
Cortex a8)
Sometimes (around 1 time on 100) I get a systemd segv during the boot,
otherwise the system boots fine and everything is OK.
I'm using a RO file sysytem on a UBI/UBIFS partition.
I dont know how to go further and see why a segv happened (how to get a
backtrace for example), You maybe will have ideas about how to debug this
issue ?
Attached the full console log of the problem.
Regards,
--
Nicolas Aguirre
Mail: aguirre.nicolas at gmail.com
Web: http://enna.geexbox.org
Blog: http://dev.enlightenment.fr/~captainigloo/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/systemd-devel/attachments/20120903/2d793f9c/attachment-0001.html>
-------------- next part --------------
U-Boot 2012.04.01-dirty (Aug 27 2012 - 17:38:29)
OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
PanelPC LPG board + LPDDR/NOR
I2C: ready
DRAM: 512 MiB
board_init !!
Flash: 1 MiB
NAND: ONFI flash detected
ONFI param page 0 valid
manuf : MICRON - model : MT29F8G08ADBDAH4
writesize : 2048 - erasesize : 131072 - oobsize : 64 - blocksperlun : 4096
busw : 0
1024 MiB
In: serial
Out: serial
Err: serial
AM3703 Actia board 10.4inch version
BOOT_PPC_LPG_P108946-_____r33 at ACTIA24.07.12Die ID #350800029e380000016b072a1001b018
Net: Net Initialization Skipped
No ethernet found.
Data (writethrough) Cache is ON
Display splash screen ....
Hit any key to stop autoboot: 0
(Re)start USB...
USB: Register 1313 NbrPorts 3
USB EHCI 1.00
scanning bus for devices... 7 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
scanning bus for ethernet devices... 1 Ethernet Device(s) found
** Unable to use usb 0:1 for fatload **
** Invalid boot device **
Booting from nand ...
Data (writethrough) Cache is ON
Instruction Cache is ON
Creating 1 MTD partitions on "nand0":
0x000000000000-0x000012c00000 : "mtd=0"
UBI: attaching mtd1 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 129024 bytes
UBI: smallest flash I/O unit: 2048
UBI: sub-page size: 512
UBI: VID header offset: 512 (aligned 512)
UBI: data offset: 2048
UBI: attached mtd1 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 300 MiB
UBI: number of good PEBs: 2400
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 2400
UBI: number of PEBs reserved for bad PEB handling: 24
UBI: max/mean erase counter: 55/30
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: mounted read-only
UBIFS: file system size: 304625664 bytes (297486 KiB, 290 MiB, 2361 LEBs)
UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: LZO
UBIFS: reserved for root: 0 bytes (0 KiB)
Loading file '/boot/uImage' to addr 0x80200000 with size 4278152 (0x00414788)...
Done
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Angstrom/3.2.19/lpg-10p4
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4278088 Bytes = 4.1 MiB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
disabling usb & dss & dcache
Starting kernel ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.19 (actia at PS-serveur-build) (gcc version 4.5.4 20120305
(prerelease) (GCC) ) #1 Mon Aug 27 13:31:58 CEST 2012
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: PanelPC LPG
[ 0.000000] Reserving 8388608 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3630 ES1.2 (l2cache neon isp 192mhz_clk )
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
[ 0.000000] DPLL5 120.000 MHz
[ 0.000000] DPLL5M2 120.000 MHz
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12800
0
[ 0.000000] Kernel command line: console=ttyO0,115200n8 omapfb.vrfb=y omapfb.vram=0:5M
mtdparts=omap2-nand.0:300m(rootfs),506m(Starter),10m(Flags_1),10m(Flags_2),100m(S),-(Log
s) mpurate=auto vram=8M omapfb.mode=dvi:800x600MR-24 at 60 omapdss.def_disp=lcd root=ubi0:ro
otfs ro rootfstype=ubifs ubi.mtd=3 ubi.mtd=4 ubi.mtd=5 ubi.mtd=6 ubi.mtd=7 ubi.mtd=8 syst
emd.log_level=debug systemd.log_target=console log_buf_len=1M enforcing=0
[ 0.000000] log_buf_len: 1048576
[ 0.000000] early log buf free: 129350(98%)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 2097152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 504MB = 504MB total
[ 0.000000] Memory: 499908k/499908k available, 24380k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06cfc0c (6944 kB)
[ 0.000000] .init : 0xc06d0000 - 0xc07dc000 (1072 kB)
[ 0.000000] .data : 0xc07dc000 - 0xc081b440 ( 254 kB)
[ 0.000000] .bss : 0xc081b464 - 0xc08608a0 ( 278 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:410 nr_irqs:410 410
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000122] Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080)
[ 0.032867] pid_max: default: 32768 minimum: 301
[ 0.033081] Security Framework initialized
[ 0.033111] AppArmor: AppArmor initialized
[ 0.033172] Mount-cache hash table entries: 512
[ 0.033569] Initializing cgroup subsys cpuacct
[ 0.033599] Initializing cgroup subsys memory
[ 0.033660] Initializing cgroup subsys devices
[ 0.033660] Initializing cgroup subsys freezer
[ 0.033691] Initializing cgroup subsys blkio
[ 0.033691] Initializing cgroup subsys perf_event
[ 0.033782] CPU: Testing write buffer coherency: ok
[ 0.034637] devtmpfs: initialized
[ 0.038055] print_constraints: dummy:
[ 0.038269] NET: Registered protocol family 16
[ 0.038452] GPMC revision 5.0
[ 0.040496] OMAP GPIO hardware version 2.5
[ 0.041778] omap_mux_init: Add partition: #1: core, flags: 0
[ 0.043060] OMAP3 Actia Version 7
[ 0.046112] Found NAND on CS3
[ 0.046112] Registering NAND on CS3
[ 0.047485] Initializing PPCLPG OPP !
[ 0.047546] REVISION_A0_10_4 -> enable 1GHz
[ 0.047576] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.050872] omap-mcbsp.2: alias fck already exists
[ 0.051025] omap-mcbsp.3: alias fck already exists
[ 0.052062] OMAP DMA hardware revision 5.0
[ 0.059539] bio: create slab <bio-0> at 0
[ 0.060668] SCSI subsystem initialized
[ 0.062011] usbcore: registered new interface driver usbfs
[ 0.062133] usbcore: registered new interface driver hub
[ 0.062286] usbcore: registered new device driver usb
[ 0.062957] omap_i2c omap_i2c.1: bus 1 rev1.4.0 at 2600 kHz
[ 0.063598] TWL : enable CK32K_LOWPWR_EN
[ 0.065307] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.065429] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.065887] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.066162] beagle_twl_gpio_setup: 192 18
[ 0.066741] print_constraints: VUSB1V5: 1500 mV normal standby
[ 0.067169] print_constraints: VUSB1V8: 1800 mV normal standby
[ 0.067596] print_constraints: VUSB3V1: 3100 mV normal standby
[ 0.070953] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.071533] print_constraints: vdd_mpu_iva: 600 <--> 1450 mV at 1362 mV normal
[ 0.071990] print_constraints: vdd_core: 600 <--> 1450 mV at 1200 mV normal
[ 0.072448] print_constraints: VMMC1: 3000 mV normal
[ 0.072845] print_constraints: VAUX2_4030: 1800 mV normal standby
[ 0.073150] omap_i2c omap_i2c.2: bus 2 rev1.4.0 at 400 kHz
[ 0.073669] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.074188] NetLabel: Initializing
[ 0.074218] NetLabel: domain hash size = 128
[ 0.074218] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.074279] NetLabel: unlabeled traffic allowed by default
[ 0.074310] Switching to clocksource 32k_counter
[ 0.074493] AppArmor: AppArmor Filesystem Enabled
[ 0.086242] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 0.086761] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
[ 0.087036] NET: Registered protocol family 2
[ 0.087219] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.087524] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.087890] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.088104] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.088104] TCP reno registered
[ 0.088134] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.088165] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.088470] NET: Registered protocol family 1
[ 0.088775] RPC: Registered named UNIX socket transport module.
[ 0.088806] RPC: Registered udp transport module.
[ 0.088806] RPC: Registered tcp transport module.
[ 0.088806] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.089141] Initializing PPCLPG OPP !
[ 0.090942] audit: initializing netlink socket (disabled)
[ 0.091003] type=2000 audit(0.101:1): initialized
[ 0.282867] VFS: Disk quotas dquot_6.5.2
[ 0.283111] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.286773] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.286804] fuse init (API version 7.17)
[ 0.288665] Btrfs loaded
[ 0.288696] msgmni has been set to 976
[ 0.290191] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.290313] io scheduler noop registered
[ 0.290313] io scheduler deadline registered
[ 0.290374] io scheduler cfq registered (default)
[ 0.530456] OMAP DSS rev 2.0
[ 0.531005] generic_dpi_panel_drv_init 544
[ 0.531036] _regulator_get: omapdss supply vdds_dsi not found, using dummy regulator
[ 0.531280] fbcvt: 800x600 at 60: CVT Name - .480M3-R
[ 0.570007] Console: switching to colour frame buffer device 100x75
[ 0.591491] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.592742] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
[ 1.333435] console [ttyO0] enabled
[ 1.337402] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
[ 1.345123] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
[ 1.352813] omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
[ 1.360717] [drm] Initialized drm 1.1.0 20060810
[ 1.373229] brd: module loaded
[ 1.380584] loop: module loaded
[ 1.383972] at24 2-0057: 256 byte 24c02 EEPROM, writable, 16 bytes/write
[ 1.395782] physmap platform flash device: 00100000 at 08000000
[ 1.402191] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer I
D 0x0000c2 Chip ID 0x00226b
[ 1.413024] Amd/Fujitsu Extended Query Table at 0x0040
[ 1.418487] Amd/Fujitsu Extended Query version 1.0.
[ 1.423767] number of CFI chips: 1
[ 1.428131] Creating 3 MTD partitions on "physmap-flash.0":
[ 1.434051] 0x000000000000-0x000000080000 : "bootloader"
[ 1.440887] 0x000000080000-0x0000000f0000 : "splashscreen"
[ 1.447784] 0x0000000f0000-0x000000100000 : "params"
[ 1.454162] Generic platform RAM MTD, (c) 2004 Simtec Electronics
[ 1.460693] omap2-nand driver initializing
[ 1.467407] enabling NAND BCH ecc with 4-bit correction
[ 1.473297] ONFI flash detected
[ 1.476745] ONFI param page 0 valid
[ 1.480468] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa3 (Micron MT29F8G08ADBDAH4
)
[ 1.488922] 6 cmdlinepart partitions found on MTD device omap2-nand.0
[ 1.495727] Creating 6 MTD partitions on "omap2-nand.0":
[ 1.501403] 0x000000000000-0x000012c00000 : "rootfs"
[ 1.716735] 0x000012c00000-0x000032600000 : "Starter"
[ 2.076049] 0x000032600000-0x000033000000 : "Flags_1"
[ 2.089416] 0x000033000000-0x000033a00000 : "Flags_2"
[ 2.102752] 0x000033a00000-0x000039e00000 : "S"
[ 2.178344] 0x000039e00000-0x000040000000 : "Logs"
[ 2.253173] UBI: attaching mtd3 to ubi0
[ 2.257293] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 2.263946] UBI: logical eraseblock size: 129024 bytes
[ 2.269683] UBI: smallest flash I/O unit: 2048
[ 2.274688] UBI: sub-page size: 512
[ 2.279602] UBI: VID header offset: 512 (aligned 512)
[ 2.285797] UBI: data offset: 2048
[ 3.519927] UBI: max. sequence number: 400
[ 3.539123] UBI: attached mtd3 to ubi0
[ 3.543151] UBI: MTD device name: "rootfs"
[ 3.548522] UBI: MTD device size: 300 MiB
[ 3.553802] UBI: number of good PEBs: 2400
[ 3.558837] UBI: number of bad PEBs: 0
[ 3.563446] UBI: number of corrupted PEBs: 0
[ 3.568206] UBI: max. allowed volumes: 128
[ 3.572998] UBI: wear-leveling threshold: 4096
[ 3.578002] UBI: number of internal volumes: 1
[ 3.582733] UBI: number of user volumes: 1
[ 3.587371] UBI: available PEBs: 0
[ 3.592132] UBI: total number of reserved PEBs: 2400
[ 3.597381] UBI: number of PEBs reserved for bad PEB handling: 24
[ 3.603851] UBI: max/mean erase counter: 55/30
[ 3.608581] UBI: image sequence number: 1686562460
[ 3.613769] UBI: background thread "ubi_bgt0d" started, PID 51
[ 3.619873] UBI: attaching mtd4 to ubi1
[ 3.623992] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 3.630615] UBI: logical eraseblock size: 129024 bytes
[ 3.636352] UBI: smallest flash I/O unit: 2048
[ 3.641357] UBI: sub-page size: 512
[ 3.646270] UBI: VID header offset: 512 (aligned 512)
[ 3.652465] UBI: data offset: 2048
[ 5.728759] UBI: max. sequence number: 66
[ 5.751129] UBI: attached mtd4 to ubi1
[ 5.755157] UBI: MTD device name: "Starter"
[ 5.760528] UBI: MTD device size: 506 MiB
[ 5.765808] UBI: number of good PEBs: 4048
[ 5.770812] UBI: number of bad PEBs: 0
[ 5.775451] UBI: number of corrupted PEBs: 0
[ 5.780181] UBI: max. allowed volumes: 128
[ 5.785095] UBI: wear-leveling threshold: 4096
[ 5.790130] UBI: number of internal volumes: 1
[ 5.794860] UBI: number of user volumes: 4
[ 5.799468] UBI: available PEBs: 0
[ 5.804229] UBI: total number of reserved PEBs: 4048
[ 5.809509] UBI: number of PEBs reserved for bad PEB handling: 40
[ 5.815948] UBI: max/mean erase counter: 32/10
[ 5.820678] UBI: image sequence number: 1493805875
[ 5.825897] UBI: background thread "ubi_bgt1d" started, PID 52
[ 5.832092] UBI: attaching mtd5 to ubi2
[ 5.836212] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 5.842834] UBI: logical eraseblock size: 129024 bytes
[ 5.848571] UBI: smallest flash I/O unit: 2048
[ 5.853454] UBI: sub-page size: 512
[ 5.858367] UBI: VID header offset: 512 (aligned 512)
[ 5.864562] UBI: data offset: 2048
[ 5.910675] UBI: max. sequence number: 15
[ 5.926727] UBI: attached mtd5 to ubi2
[ 5.930633] UBI: MTD device name: "Flags_1"
[ 5.936126] UBI: MTD device size: 10 MiB
[ 5.941314] UBI: number of good PEBs: 80
[ 5.946166] UBI: number of bad PEBs: 0
[ 5.950897] UBI: number of corrupted PEBs: 0
[ 5.955505] UBI: max. allowed volumes: 128
[ 5.960449] UBI: wear-leveling threshold: 4096
[ 5.965454] UBI: number of internal volumes: 1
[ 5.970092] UBI: number of user volumes: 1
[ 5.974822] UBI: available PEBs: 0
[ 5.979461] UBI: total number of reserved PEBs: 80
[ 5.984558] UBI: number of PEBs reserved for bad PEB handling: 2
[ 5.990936] UBI: max/mean erase counter: 23/14
[ 5.995666] UBI: image sequence number: 338482374
[ 6.000793] UBI: background thread "ubi_bgt2d" started, PID 53
[ 6.007019] UBI: attaching mtd6 to ubi3
[ 6.011016] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 6.017669] UBI: logical eraseblock size: 129024 bytes
[ 6.023406] UBI: smallest flash I/O unit: 2048
[ 6.028411] UBI: sub-page size: 512
[ 6.033233] UBI: VID header offset: 512 (aligned 512)
[ 6.039398] UBI: data offset: 2048
[ 6.085418] UBI: max. sequence number: 16
[ 6.101318] UBI: attached mtd6 to ubi3
[ 6.105346] UBI: MTD device name: "Flags_2"
[ 6.110809] UBI: MTD device size: 10 MiB
[ 6.116027] UBI: number of good PEBs: 80
[ 6.120819] UBI: number of bad PEBs: 0
[ 6.125579] UBI: number of corrupted PEBs: 0
[ 6.130310] UBI: max. allowed volumes: 128
[ 6.135101] UBI: wear-leveling threshold: 4096
[ 6.140106] UBI: number of internal volumes: 1
[ 6.144836] UBI: number of user volumes: 1
[ 6.149475] UBI: available PEBs: 0
[ 6.154205] UBI: total number of reserved PEBs: 80
[ 6.159210] UBI: number of PEBs reserved for bad PEB handling: 2
[ 6.165588] UBI: max/mean erase counter: 19/12
[ 6.170318] UBI: image sequence number: 77453532
[ 6.175323] UBI: background thread "ubi_bgt3d" started, PID 54
[ 6.181518] UBI: attaching mtd7 to ubi4
[ 6.185638] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 6.192260] UBI: logical eraseblock size: 129024 bytes
[ 6.197875] UBI: smallest flash I/O unit: 2048
[ 6.202880] UBI: sub-page size: 512
[ 6.207794] UBI: VID header offset: 512 (aligned 512)
[ 6.213867] UBI: data offset: 2048
[ 6.628326] UBI: max. sequence number: 77
[ 6.645935] UBI: attached mtd7 to ubi4
[ 6.649841] UBI: MTD device name: "S"
[ 6.654754] UBI: MTD device size: 100 MiB
[ 6.660034] UBI: number of good PEBs: 800
[ 6.664947] UBI: number of bad PEBs: 0
[ 6.669708] UBI: number of corrupted PEBs: 0
[ 6.674316] UBI: max. allowed volumes: 128
[ 6.679260] UBI: wear-leveling threshold: 4096
[ 6.684265] UBI: number of internal volumes: 1
[ 6.688873] UBI: number of user volumes: 5
[ 6.693634] UBI: available PEBs: 0
[ 6.698242] UBI: total number of reserved PEBs: 800
[ 6.703430] UBI: number of PEBs reserved for bad PEB handling: 8
[ 6.709808] UBI: max/mean erase counter: 36/11
[ 6.714569] UBI: image sequence number: 472952440
[ 6.719665] UBI: background thread "ubi_bgt4d" started, PID 55
[ 6.725860] UBI: attaching mtd8 to ubi5
[ 6.729858] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 6.736511] UBI: logical eraseblock size: 129024 bytes
[ 6.742248] UBI: smallest flash I/O unit: 2048
[ 6.747253] UBI: sub-page size: 512
[ 6.752075] UBI: VID header offset: 512 (aligned 512)
[ 6.758239] UBI: data offset: 2048
[ 7.164428] UBI: max. sequence number: 242
[ 7.181243] UBI: attached mtd8 to ubi5
[ 7.185302] UBI: MTD device name: "Logs"
[ 7.190399] UBI: MTD device size: 98 MiB
[ 7.195617] UBI: number of good PEBs: 784
[ 7.200561] UBI: number of bad PEBs: 0
[ 7.205230] UBI: number of corrupted PEBs: 0
[ 7.209991] UBI: max. allowed volumes: 128
[ 7.214935] UBI: wear-leveling threshold: 4096
[ 7.219970] UBI: number of internal volumes: 1
[ 7.224731] UBI: number of user volumes: 1
[ 7.229400] UBI: available PEBs: 0
[ 7.234161] UBI: total number of reserved PEBs: 784
[ 7.239379] UBI: number of PEBs reserved for bad PEB handling: 7
[ 7.245788] UBI: max/mean erase counter: 28/12
[ 7.250549] UBI: image sequence number: 827041192
[ 7.256011] CAN device driver interface
[ 7.260162] UBI: background thread "ubi_bgt5d" started, PID 56
[ 7.275726] mcp251x spi4.0: probed
[ 7.279724] usbcore: registered new interface driver cdc_ether
[ 7.285980] usbcore: registered new interface driver smsc95xx
[ 7.292022] usbcore: registered new interface driver rndis_host
[ 7.298583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 8.308990] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 8.315216] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 8.323120] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 8.340301] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 8.346405] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.353576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.361206] usb usb1: Product: OMAP-EHCI Host Controller
[ 8.366851] usb usb1: Manufacturer: Linux 3.2.19 ehci_hcd
[ 8.372589] usb usb1: SerialNumber: ehci-omap.0
[ 8.377960] hub 1-0:1.0: USB hub found
[ 8.381988] hub 1-0:1.0: 3 ports detected
[ 8.410675] usbcore: registered new interface driver cdc_acm
[ 8.416564] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapter
s
[ 8.425048] Initializing USB Mass Storage driver...
[ 8.430297] usbcore: registered new interface driver usb-storage
[ 8.436676] USB Mass Storage support registered.
[ 8.441650] usbcore: registered new interface driver libusual
[ 8.447875] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma)
[ 8.455139] mousedev: PS/2 mouse device common for all mice
[ 8.462127] tsc2046 spi1.0: touchscreen, irq 301
[ 8.467590] input: TS2046 Touchscreen as /devices/platform/omap/omap2_mcspi.1/spi_mast
er/spi1/spi1.0/input/input0
[ 8.480255] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 8.488800] i2c /dev entries driver
[ 8.494079] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 8.501098] twl4030_wdt twl4030_wdt: Failed to register misc device
[ 8.507720] twl4030_wdt: probe of twl4030_wdt failed with error -16
[ 8.516387] cpufreq-omap: 600 MHz, 1362 mV --> 1000 MHz, 1375 mV
[ 8.523559] cpuidle: using governor ladder
[ 8.527954] cpuidle: using governor menu
[ 8.532623] usbcore: registered new interface driver usbhid
[ 8.538574] usbhid: USB HID core driver
[ 8.543853] OMAP3 Beagle/Devkit8000 SoC init
[ 8.611724] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
[ 8.620269] ALSA device list:
[ 8.623474] #0: omap3beagle
[ 8.626586] oprofile: hardware counters not available
[ 8.631958] oprofile: using timer interrupt.
[ 8.636718] TCP cubic registered
[ 8.640777] NET: Registered protocol family 10
[ 8.646026] NET: Registered protocol family 17
[ 8.650787] can: controller area network core (rev 20090105 abi 8)
[ 8.657409] NET: Registered protocol family 29
[ 8.662139] can: raw protocol (rev 20090105)
[ 8.666595] can: broadcast manager protocol (rev 20090105 t)
[ 8.672607] Registering the dns_resolver key type
[ 8.677642] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.685729] ThumbEE CPU extension supported.
[ 8.690216] Registering SWP/SWPB emulation handler
[ 8.698455] sr_init: No PMIC hook to init smartreflex
[ 8.703948] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
[ 8.712188] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
[ 8.720428] SmartReflex Class3 initialized
[ 8.727691] clock: disabling unused clocks to save power
[ 8.734100] registered taskstats version 1
[ 8.741424] twl_rtc twl_rtc: setting system clock to 2000-04-10 18:21:22 UTC (95539088
2)
[ 8.831726] usb 1-2: new high-speed USB device number 2 using ehci-omap
[ 8.859161] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 8.865539] UBIFS: mounted read-only
[ 8.869262] UBIFS: file system size: 304625664 bytes (297486 KiB, 290 MiB, 2361 LEBs
)
[ 8.877746] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 8.885498] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 8.891693] UBIFS: default compressor: lzo
[ 8.896087] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 8.904144] VFS: Mounted root (ubifs filesystem) readonly on device 0:15.
[ 8.913421] devtmpfs: mounted
[ 8.917602] Freeing init memory: 1072K
[ 9.022888] usb 1-2: New USB device found, idVendor=0424, idProduct=9514
[ 9.029998] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.059265] hub 1-2:1.0: USB hub found
[ 9.063293] hub 1-2:1.0: 5 ports detected
Successfully opened /dev/console for logging.
Mounting cgroup to /sys/fs/cgroup/cpuset of type cgroup with options cpuset.
Mounting cgroup to /sys/fs/cgroup/cpu,cpuacct of type cgroup with options cpu,cpuacct.
Mounting cgroup to /sys/fs/cgroup/memory of type cgroup with options memory.
Mounting cgroup to /sys/fs/cgroup/devices of type cgroup with options devices.
Mounting cgroup to /sys/fs/cgroup/freezer of type cgroup with options freezer.
Mounting cgroup to /sys/fs/cgroup/blkio of type cgroup with options blkio.
Mounting cgroup to /sys/fs/cgroup/perf_event of type cgroup with options perf_event.
systemd 44 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYP
TSETUP; angstrom)
Welcome to The Ångström Distribution!
Your kernel apparently lacks built-in autofs4 support. Might be a good idea to compile it
in. We'll now try to work around this by loading the module...
Inserted module 'autofs4'
Set hostname to <lpg-10p4>.
[ 9.380065] usb 1-2.1: new high-speed USB device number 3 using ehci-omap
Looking for unit files in:
/etc/systemd/system
/lib/systemd/system
Looking for SysV init scripts in:
/etc/init.d
Looking for SysV rcN.d links in:
/etc
Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd/
system.
Installed release agent.
Created root group.
Using notification socket /run/systemd/notify
Successfully cre[ 9.519775] usb 1-2.1: New USB device found, idVendor=0424, idProduct=
ec00
ated private D-B[ 9.528350] usb 1-2.1: New USB device strings: Mfr=0, Product=0, Seria
lNumber=0
us server.
Spawned /lib/systemd/system-gene[ 9.545928] smsc95xx v1.0.4
rators/systemd-getty-generator as 62
/lib/systemd/system-generators/systemd-getty-generator exited successfully.
Added generator unit path /run/systemd/generator to search path.
[ 9.702056] smsc95xx 1-2.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-2.1, smsc
95xx USB 2.0 Ethernet, 56:2b:99:c3:03:e5
Failed to load configuration for plymouth-start.service: No such file or directory
Failed to load configuration for auditd.service: No such file or directory
[ 9.817169] usb 1-2.2: new high-speed USB device number 4 using ehci-omap
-.mount changed dead -> mounted
Activating default unit: default.target
Trying to enqueue job graphical.target/start/replace
Installed new job graphical.target/start as 1
Installed new job multi-user.target/start as 2
Installed new job basic.target/start as 3
Installed new job sysinit.target/start as 4
Installed new job local-fs.target/start as 5
Installed new job R.mount/start as 6
Installed new job systemd-journald.socket/start as 7
Installed new job mnt.mount/start as 13
Installed new job home-root.mount/start as 14
Installed new job var-lib.mount/start as 15
Installed new job media-ram.mount/start as 16
Installed new job media.mount/start as 17
Installed new job var-volatile.mount/start as 18
Installed new job tmp.mount/start as 19
Installed new job fsck-root.service/start as 20
Installed new job systemd-remount-api-vfs.service/start as 21
Installed new job local-fs-pre.target/start as 22
Installed new job remount-rootfs.service/start as 24
Installed new job swap.target/start as 25
Installed new job dev-mqueue.mount/start as 26
Installed new job sys-kernel-config.mount/start as 27
Installed new job proc-sys-fs-binfmt_misc.automount/start as 28
Installed new job run-postinsts.service/start as 29
Installed new job systemd-random-seed-load.service/start as 30
Inst[ 9.952178] usb 1-2.2: New USB device found, idVendor=05e3, idProduct=0608
alled new job sy[ 9.959686] usb 1-2.2: New USB device strings: Mfr=0, Product=1, Seria
lNumber=0
s-kernel-debug.m[ 9.968841] usb 1-2.2: Product: USB2.0 Hub
ount/start as 32[ 9.975555] hub 1-2.2:1.0: USB hub found
Installed new [ 9.980621] hub 1-2.2:1.0: 4 ports detected
job dev-hugepages.mount/start as 33
Installed new job systemd-modules-load.service/start as 34
Installed new job systemd-journald.service/start as 35
Installed new job sys-fs-fuse-connections.mount/start as 36
Installed new job systemd-tmpfiles-setup.service/start as 37
Installed new job systemd-binfmt.service/start as 38
Installed new job machineid.service/start as 39
Installed new job systemd-sysctl.service/start as 40
Installed new job systemd-ask-password-console.path/start as 41
Installed new job sockets.target/start as 44
Installed new job dropbear.socket/start as 45
Installed new job systemd-initctl.socket/start as 47
Installed new job dbus.socket/start as 48
Installed new job systemd-shutdownd.socket/start as 49
Installed new job udev-control.socket/start as 50
Installed new job udev-kernel.socket/start as 51
Installed new job systemd-tmpfiles-clean.timer/start as 52
Installed new job udev.service/start as 53
Installed new job udev-trig[ 10.074798] usb 1-2.3: new high-speed USB device number 5 u
sing ehci-omap
ger.service/start as 54
Installed new job remote-fs.target/start as 55
Installed new job connman.service/start as 56
Installed new job dropbearkey.service/start as 57
Installed new job dbus.service/start as 58
Installed new job getty.target/start as 59
Installed new job serial-getty at ttyO0.service/start as 60
Installed new job dev-ttyO0.device/start as 61
Installed new job systemd-logind.service/start as 62
Installed new job systemd-user-sessions.service/start as 63
Installed new job systemd-ask-password-wall.path/start as 64
Installed new job systemd-update-utmp-runlevel.service/start as 65
Installed new job network.service/start as 68
Installed new job network.target/start as 69
Installed new job loop.service/start as 70
Installed new job polkitd.service/start as 71
Enqueued job graphical.target/start as 1
Loaded units and determined initial transaction in 299ms 286us.
systemd-ask-password-wall.path changed dead -> waiting
Job systemd-ask-password-wall.path/start finished, result=done
remote-fs.target changed dead -> active
Job remote-fs.target/start finished, result=done
udev-kernel.socket changed dead -> listening
Job udev-kernel.socket/start finished, result=done
udev-control.socket changed dead -> listening
Job udev-control.socket/start finished,[ 10.202911] usb 1-2.3: New USB device found, id
Vendor=196d, idProduct=0201
result=done
sy[ 10.210235] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
stemd-shutdownd.[ 10.219390] usb 1-2.3: Product: USB EDC
socket changed d[ 10.224884] usb 1-2.3: Manufacturer: Generic
ead -> listening[ 10.230804] usb 1-2.3: SerialNumber: 000000000000DE
Job systemd-sh[ 10.238586] scsi0 : usb-storage 1-2.3:1.0
utdownd.socket/start finished, result=done
systemd-initctl.socket changed dead -> listening
Job systemd-initctl.socket/start finished, result=done
systemd-ask-password-console.path changed dead -> waiting
Job systemd-ask-password-console.path/start finished, result=done
Autofs kernel version 1.0
Autofs protocol version 5.2
proc-sys-fs-binfmt_misc.automount changed dead -> waiting
Job proc-sys-fs-binfmt_misc.automount/start finished, result=done
swap.target changed dead -> active
Job swap.target/start finished, result=done
systemd-journald.socket changed dead -> listening
Job systemd-journald.socket/start finished, result=done
Starting POSIX Message Queue File System...
About to execute: /bin/mount mqueue /dev/mqueue -t mqueue
Forked /bin/mount as 65
dev-mqueue.mount changed dead -> mounting
Starting Debug File System...
About to[ 10.326080] usb 1-2.2.2: new low-speed USB device number 6 using ehci-omap
execute: /bin/mount debugfs /sys/kernel/debug -t debugfs
Forked /bin/mount as 66
sys-kernel-debug.mount changed dead -> mounting
Starting of dev-hugepages.mount requested but condition failed. Ignoring.
Job dev-hugepages.mount/start finished, result=done
Started Huge Pages File System [ OK ]
Starting of systemd-modules-load.service requested but condition failed. Ignoring.
Job systemd-modules-load.service/start finished, result=done
Started Load Kernel Modules [ OK ]
Starting of sys-kernel-config.mount requested but condition failed. Ignoring.
Job sys-kernel-config.mount/start finished, result=done
Started Configuration File System [ OK ]
Starting FUSE Control File System...
About to execute: /bin/mount fusectl /sys/fs/fuse/connections -t fusectl
Forked /bin/mount as 67
sys-fs-fuse-connections.mount changed dead -> mounting
Starting of systemd-binfmt.service requested but condition failed. Ignoring.
Job systemd-binfmt.service/start finished, result=done
Started Set Up Additional Binary Formats [ OK ]
Starting of systemd-sysctl.service requested but condition failed. Ignoring.
Job systemd-sysctl.service/start finished, result=done
Started Apply Kernel Variables [ OK ]
Starting Temporary Directory... [ 10.471649] usb 1-2.2.2:
New USB device found, idVendor=046a, idProduct=0001
[ 10.480224] usb 1-2.2.2: New USB device strings: Mfr=0, Product=0, Ser
ialNumber=0
About to execute: /bin/mount tmpfs /tmp -t tmpfs -o mode=1777
Forked /bin/mount as 68
tmp.mount changed dead -> mounting
Starting File System Check on Root Device...
About to execute: /lib/systemd/systemd-fsck
Forked /lib/systemd/systemd-fsck as 69
fsck-root.service changed dead -> start
Starting Remount API VFS...
About to execute: /lib/systemd/systemd-remount-api-vfs
Forked /[ 10.530822] input: HID 046a:0001 as /devices/platform/usbhs-omap.0/ehci-omap.0
/usb1/1-2/1-2.2/1-2.2.2/1-2.2.2:1.0/input/input1
lib/systemd/syst[ 10.544311] generic-usb 0003:046A:0001.0001: input,hidraw0: USB HID v1
.00 Keyboard [HID 046a:0001] on usb-ehci-omap.0-2.2.2/input0
emd-remount-api-vfs as 70
systemd-remount-api-vfs.service changed dead -> start
Starting udev Kernel Device Manager...
About to execute: /lib/udev/udevd
Forked /lib/udev/udevd as 71
udev.service changed dead -> start
Starting udev Coldplug all Devices...
About to execute: /usr/bin/udevadm trigger --type=subsystems --action=add
Forked /usr/bin/udevadm as 72
udev-trigger.service changed dead -> start
Starting Journal Service...
About to execute: /lib/systemd/systemd-journald
Forked /lib/systemd/systemd-journald as 73
systemd-journald.service changed dead -> running
Job systemd-journald.service/start finished, result=done
Started Journal Service [ OK ]
Running GC...
Collecting dbus-1.service
Collecting avahi-daemon.socket
Collecting avahi-daemon.service
[ 10.642578] udevd[71]: starting version 182
Collecting networking.service
Collecting busybox-udhcpc.service
Received SIGCHLD from PID 62 (n/a).
Incoming traffic on udev-kernel.socket
udev-kernel.socket changed listening -> running
Incoming traffic on systemd-journald.socket
systemd-journald.socket changed listening -> running
Successfully opened /dev/console for logging.
R[ 10.677581] usb 1-2.2.3: new low-speed USB device number 7 using ehci-omap
eceived SIGCHLD from PID 67 (mount).
Got SIGCHLD for process 65 (mount)
Got notification message for unit udev.service
udev.service: Got message
udev.service: got READY=1
udev.service changed start -> running
Job udev.service/start finished, result=done
Started udev Kernel Device Manager [ OK ]
Successfully opened /dev/console for logging.
Child 65 died (code=exited, status=0/SUCCESS)
Child 65 belongs to dev-mqueue.mount
dev-mqueue.mount mount process exited, code=exited status=0
dev-mqueue.mount changed mounting -> mounted
Job dev-mqueue.mount/start finished, result=done
Started POSIX Message Queue File System [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 66 (mount)
Child 66 died (code=exited, status=0/SUCCESS)
Child 66 belongs to sys-kernel-debug.mount
sys-kernel-debug.mount mount process exited, code=exited status=0
sys-kernel-debug.mount changed mounting -> mounted
Job sys-kernel-debug.mount/start finished, result=done
Started Debug File System [ 10.813995] usb 1-2.2.3: New USB de
vice found, idVendor=046d, idProduct=c05b
[ 10.821746] usb 1-2.2.3: New USB device strings: Mfr=1, Product=2, Ser
ialNumber=0
[ OK[ 10.831054] usb 1-2.2.3: Product: USB Optical Mouse
]
[ 10.837646] usb 1-2.2.3: Manufacturer: Logitech
Successfully opened /dev/console for logging.
Got SIGCHLD for process 67 (mount)
Child 67 died (code=exited, status=0/SUCCESS)
Child 67 belongs to sys-fs-fus[ 10.856994] input: Logitech USB Optical Mouse as /device
s/platform/usbhs-omap.0/ehci-omap.0/usb1/1-2/1-2.2/1-2.2.3/1-2.2.3:1.0/input/input2
e-connections.mo[ 10.871276] generic-usb 0003:046D:C05B.0002: input,hidraw1: USB HID v1
.11 Mouse [Logitech USB Optical Mouse] on usb-ehci-omap.0-2.2.3/input0
unt
sys-fs-fuse-connections.mount mount process exited, code=exited status=0
sys-fs-fuse-connections.mount changed mounting -> mounted
Job sys-fs-fuse-connections.mount/start finished, result=done
Started FUSE Control File System [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 68 (mount)
Child 68 died (code=exited, status=0/SUCCESS)
Child 68 belongs to tmp.mount
tmp.mount mount process exited, code=exited status=0
tmp.mount changed mounting -> mounted
Job tmp.mount/start finished, result=done
Started Temporary Directory [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 69 (systemd-fsck)
Child 69 died (code=exited, status=0/SUCCESS)
Child 69 belongs to fsck-root.service
fsck-root.service: main process exited, code=exited, status=0
fsck-root.service changed start -> dead
Job fsck-root.service/start finished, result=done
Started File System Check on Root Device [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 70 (systemd-remount)
Child 70 died (code=exited, status=0/SUCCESS)
Child 70 belongs to systemd-remount-api-vfs.service
systemd-remount-api-vfs.service: main process exited, code=exited, status=0
systemd-remount-api-vfs.service changed start -> exited
Job systemd-remount-api-vfs.service/start finished, result=done
Started Remount API VFS [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 72 (udevadm)
Child 72 died (code=exited, status=0/SUCCESS)
Child 72 belongs to udev-trigger.service
udev-trigger.service: main process exited, code=exited, status=0
udev-trigger.service running next main command for state start
About to execute: /usr/bin/udevadm trigger --type=devices --action=add
Forked /usr/bin/udevadm as 102
Starting Remount Root FS...
About to execute: /bin/mount / -o remount
Forked /bin/mount as 103
remount-rootfs.service changed dead -> start
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
[ 11.242767] scsi 0:0:0:0: Direct-Access Generic USB EDC 1.00 PQ: 0 ANSI:
2
Successfully opened /dev/console for logging.
[ 11.264831] sd 0:0:0:0: Attached scsi generic sg0 type 0
Successfully opened /dev/console for logging.
[ 11.274810] sd 0:0:0:0: [sda] 7892040 512-byte logical blocks: (4.04 GB/3.76 GiB)
Successfully opened /dev/console for logging.
[ 11.290344] sd 0:0:0:0: [sda] Write Protect is off
Successfully ope[ 11.301544] sd 0:0:0:0: [sda] Asking for cache data failed
ned /dev/console[ 11.308593] sd 0:0:0:0: [sda] Assuming drive cache: write through
for logging.
[ 11.327178] sd 0:0:0:0: [sda] Asking for cache data failed
[ 11.333068] sd 0:0:0:0: [sda] Assuming drive cache: write through
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got notification message for unit systemd-journald.service
systemd-journald.service: Got message
systemd-journald.service: got STATUS=Processing requests...
Received SIGCHLD from PID 72 (n/a).
Got SIGCHLD for process 102 (udevadm)
Child 102 died (code=exited, status=0/SUCCESS)
Child 102 belongs to udev-trigger.service
udev-trigger.service: main process exited, code=exited, status=0
udev-trigger.service changed start -> exited
Job udev-trigger.service/start finished, result=done
Started udev Coldplug all Devices [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 103 (mount)
Child 103 died (code=exited, status=0/SUCCESS)
Child 103 belongs to remount-rootfs.service
remount-rootfs.service: main process exited, code=exited, status=0
remount-rootfs.service changed start -> exited
Job remount-rootfs.service/start finished, result=done
Started Remount Root FS [ OK ]
Successfully opened /dev/console for logging.
local-fs-pre.target changed dead -> active
Job local-fs-pre.target/start finished, result=done
[ 11.480712] sda: sda1 sda2
Successfully opened /dev/console[ 11.491790] sd 0:0:0:0: [sda] Asking for cache data fa
iled
for logging.
S[ 11.497741] sd 0:0:0:0: [sda] Assuming drive cache: write through
tarting /var/vol[ 11.505615] sd 0:0:0:0: [sda] Attached SCSI disk
atile...
About to execute: /bin/mount /var/volatile
Forked /bin/mount as 141
var-volatile.mount changed dead -> mounting
Successfully opened /dev/console for logging.
Starting /media...
About to execute: /bin/mount /media
Forked /bin/mount as 142
media.mount changed dead -> mounting
Successfully opened /dev/console for logging.
Starting /var/lib...
About to execute: /bin/mount /var/lib
Forked /bin/mount as 143
var-lib.mount changed dead -> mounting
Successfully opened /dev/console for logging.
Starting /home/root...
About to execute: /bin/mount /home/root
Forked /bin/mount as 144
home-root.mount changed dead -> mounting
Successfully opened /dev/console for logging.
Starting /mnt...
About to execute: /bin/mount /mnt
Forked /bin/mount as 155
mnt.mount changed dead -> mounting
Successfully opened /dev/console for logging.
Starting /R...
About to execute: /bin/mount /R
Forked /bin/mount as 156
R.mount changed dead -> mounting
Successfully opened /dev/console for logging.
Starting Machine ID first boot configure...
About to execute: /bin/systemd-machine-id-setup
Forked /bin/systemd-machine-id-setup as 157
machineid.service changed dead -> start
Successfully opened /dev/console for logging.
Starting Run pending postinsts...
About to execute: /etc/rcS.d/S98run-postinsts
Forked /etc/rcS.d/S98run-postinsts as 158
run-postinsts.service changed dead -> start
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
home-root.mount changed mounting -> mounting-done
Job home-root.mount/start finished, result=done
Started /home/root [ OK ]
Successfully opened /dev/console for logging.
var-lib.mount changed mounting -> mounting-done
Job var-lib.mount/start finished, result=done
Started /var/lib [ OK ]
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
media.mount changed mounting -> mounting-done
Job media.mount/st[ 11.865631] UBIFS: mounted UBI device 5, volume 0, name "Logs"
art finished, re[ 11.872070] UBIFS: file system size: 98445312 bytes (96138 KiB, 93 M
iB, 763 LEBs)
sult=done
Start[ 11.881530] UBIFS: journal size: 4902912 bytes (4788 KiB, 4 MiB, 38 LEBs)
ed /media [ 11.890655] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 11.898254] UBIFS: default compressor: lzo
[ 11.904022] UBIFS: reserved for root: 4649814 bytes (4540 KiB)
[ OK ]
Successfully opened /dev/console for logging.
var-volatile.mount changed mounting -> mounting-done
Job var-volatile.mount/start finished, result=done
Started /var/volatile [ OK ]
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Starting /media/ram...
About to execute: /bin/mount /media/ram
Forked /bin/mount as 172
media-ram.mount changed dead -> mounting
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Received SIGCHLD from PID 141 (mount).
Got SIGCHLD for process 141 (mount)
Child 141 died (code=exited, status=0/SUCCESS)
Child 141 belongs to var-volatile.mount
var-volatile.mount mount process exited, code=exited status=0
var-volatile.mount changed mounting-done -> mounted
Successfully opened /dev/console for logging.
Got SIGCHLD for process 142 (mount)
Child 142 died (code=exited, status=0/SUCCESS)
Child 142 belongs to media.mount
media.mount mount process exited, code=exited status=0
media.mount changed mounting-done -> mounted
Successfully opened /dev/console for logging.
Got SIGCHLD for process 143 (mount)
Child 143 died (code=exited, status=0/SUCCESS)
Child 143 belongs to var-lib.mount
var-lib.mount mount process exited, code=exited status=0
var-lib.mount changed mounting-done -> mounted
Successfully opened /dev/console for logging.
Got SIGCHLD for process 144 (mount)
Child 144 died (code=exited, status=0/SUCCESS)
Child 144 belongs to home-root.mount
home-root.mount mount process exited, code=exited status=0
home-root.mount changed mounting-done -> mounted
Successfully opened /dev/console for logging.
Got SIGCHLD for process 155 (mount)
Child 155 died (code=exited, status=0/SUCCESS)
Child 155 belongs to mnt.mount
mnt.mount mount process exited, code=exited status=0
mnt.mount changed mounting -> mounted
Job mnt.mount/start finished, result=done
Started /mnt [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 156 (mount)
Child 156 died (code=exited, status=0/SUCCESS)
Child 156 belongs to R.mount
R.mount mount process exited, code=exited status=0
R.mount changed mounting -> mounted
Job R.mount/start finished, result=done
Started /R [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 157 (systemd-machine)
Child 157 died (code=exited, status=1/FAILURE)
Child 157 belongs to machineid.service
machineid.service: main process exited, code=exited, status=1
machineid.service changed start -> failed
Job machineid.service/start finished, result=failed
Failed to start Machine ID first boot configure [FAILED]
See 'systemctl status machineid.service' for details.
Unit machineid.service entered failed state.
Successfully opened /dev/console for logging.
Got SIGCHLD for process 172 (mount)
Child 172 died (code=exited, status=0/SUCCESS)
Child 172 belongs to media-ram.mount
media-ram.mount mount process exited, code=exited status=0
media-ram.mount changed mounting -> mounted
Job media-ram.mount/start finished, result=done
Started /media/ram [ OK ]
Successfully opened /dev/console for logging.
local-fs.target changed dead -> active
Job local-fs.target/start finished, result=done
Successfully opened /dev/console for logging.
Starting Recreate Volatile Files and Directories...
About to execute: /bin/systemd-tmpfiles --create --remove
Forked /bin/systemd-tmpfiles as 204
systemd-tmpfiles-setup.service changed dead -> start
Successfully opened /dev/console for logging.
Starting Load Random Seed...
About to execute: /lib/systemd/systemd-random-seed load
Forked /lib/systemd/systemd-random-seed as 206
systemd-random-seed-load.service changed dead -> start
Successfully opened /dev/console for logging.
sys-module-fuse.device changed dead -> plugged
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Received SIGCHLD from PID 172 (n/a).
Got SIGCHLD for process 158 (S98run-postinst)
Child 158 died (code=exited, status=1/FAILURE)
Child 158 belongs to run-postinsts.service
run-postinsts.service: main process exited, code=exited, status=1
run-postinsts.service changed start -> failed
Job run-postinsts.service/start finished, result=failed
Failed to start Run pending postinsts [FAILED]
See 'systemctl status run-postinsts.service' for details.
Unit run-postinsts.service entered failed state.
Successfully opened /dev/console for logging.
Got SIGCHLD for process 204 (systemd-tmpfile)
Child 204 died (code=exited, status=0/SUCCESS)
Child 204 belongs to systemd-tmpfiles-setup.service
systemd-tmpfiles-setup.service: main process exited, code=exited, status=0
systemd-tmpfiles-setup.service changed start -> exited
Job systemd-tmpfiles-setup.service/start finished, result=done
Started Recreate Volatile Files and Directories [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 206 (systemd-random-)
Child 206 died (code=exited, status=0/SUCCESS)
Child 206 belongs to systemd-random-seed-load.service
systemd-random-seed-load.service: main process exited, code=exited, status=0
systemd-random-seed-load.service changed start -> dead
Job systemd-random-seed-load.service/start finished, result=done
Started Load Random Seed [ OK ]
Successfully opened /dev/console for logging.
sysinit.target changed dead -> active
Job sysinit.target/start finished, result=done
Successfully opened /dev/console for logging.
dropbear.socket changed dead -> listening
Job dropbear.socket/start finished, result=done
Successfully opened /dev/console for logging.
dbus.socket changed dead -> listening
Job dbus.socket/start finished, result=done
Successfully opened /dev/console for logging.
sockets.target changed dead -> active
Job sockets.target/start finished, result=done
Successfully opened /dev/console for logging.
systemd-tmpfiles-clean.timer changed dead -> waiting
Job systemd-tmpfiles-clean.timer/start finished, result=done
Successfully opened /dev/console for logging.
basic.target changed dead -> active
Job basic.target/start finished, result=done
Successfully opened /dev/console for logging.
Starting Connection service...
About to execute: /usr/sbin/connmand -n
Forked /usr/sbin/connmand as 262
connman.service changed dead -> start
Successfully opened /dev/console for logging.
Starting SSH Key Generation...
About to execute: /usr/sbin/dropbearkey -t rsa -f /var/volatile/run/dropbear_rsa_host_key
Forked /usr/sbin/dropbearkey as 263
dropbearkey.service changed dead -> running
Job dropbearkey.service/start finished, result=done
Started SSH Key Generation [ OK ]
Successfully opened /dev/console for logging.
Starting Login Service...
About to execute: /lib/systemd/systemd-logind
Forked /lib/systemd/systemd-logind as 264
systemd-logind.service changed dead -> start
Successfully opened /dev/console for logging.
Starting Permit User Sessions...
About to execute: /lib/systemd/systemd-user-sessions start
Forked /lib/systemd/systemd-user-sessions as 265
systemd-user-sessions.service changed dead -> start
Successfully opened /dev/console for logging.
Starting Network Connectivity...
About to execute: /sbin/actia-network.sh start eth0
Forked /sbin/actia-network.sh as 267
network.service changed dead -> start
Successfully opened /dev/console for logging.
Starting D-Bus System Message Bus...
About to execute: /usr/bin/dbus-uuidgen --ensure
Forked /usr/bin/dbus-uuidgen as 268
dbus.service changed dead -> start-pre
Successfully opened /dev/console for logging.
Starting Policy Manager...
About to execute: /usr/libexec/polkitd --no-debug
Forked /usr/libexec/polkitd as 269
polkitd.service changed dead -> start
Successfully opened /dev/console for logging.
sys-devices-platform-omap-omap2_mcspi.4-spi_master-spi4-spi4.0-net-can0.device changed de
ad -> plugged
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Received SIGCHLD from PID 265 (systemd-user-se).
Got SIGCHLD for process 265 (systemd-user-se)
Child 265 died (code=exited, status=0/SUCCESS)
Child 265 belongs to systemd-user-sessions.service
systemd-user-sessions.service: main process exited, code=exited, status=0
systemd-user-sessions.service changed start -> exited
Job systemd-user-sessions.service/start finished, result=done
Started Permit User Sessions [ OK ]
Successfully opened /dev/console for logging.
Got SIGCHLD for process 268 (dbus-uuidgen)
Child 268 died (code=exited, status=0/SUCCESS)
Child 268 belongs to dbus.service
dbus.service: control process exited, code=exited status=0
dbus.service running next control command for state start-pre
About to execute: /bin/rm -f /var/run/dbus/pid
Forked /bin/rm as 274
Got SIGCHLD for process 269 ((polkitd))
Child 269 died (code=exited, status=203/EXEC)
Child 269 belongs to polkitd.service
polkitd.service: main process exited, code=exited, status=203
polkitd.service changed start -> failed
Job polkitd.service/start finished, result=failed
Failed to start Policy Manager [FAILED]
See 'systemctl status polkitd.service' for details.
Unit polkitd.service entered failed state.
Successfully opened /dev/console for logging.
Got SIGCHLD for process 274 (rm)
Child 274 died (code=exited, status=0/SUCCESS)
Child 274 belongs to dbus.service
dbus.service: control process exited, code=exited status=0
dbus.service got final SIGCHLD for state start-pre
About to execute: /usr/bin/dbus-daemon --system --address=systemd: --nofork --systemd-act
ivation
Forked /usr/bin/dbus-daemon as 280
dbus.service changed start-pre -> running
Job dbus.service/start finished, result=done
Started D-Bus System Message Bus [ OK ]
Successfully opened /dev/console for logging.
Starting Reboot...
About to execute: /sbin/reboot
Forked /sbin/reboot as 283
loop.service changed dead -> running
Job loop.service/start finished, result=done
Started Reboot [ OK ]
Successfully opened /dev/console for logging.
dev-ttyO0.device changed dead -> plugged
Job dev-ttyO0.device/start finished, result=done
Successfully opened /dev/console for logging.
sys-devices-platform-omap-omap_uart.0-tty-ttyO0.device changed dead -> plugged
Successfully opened /dev/console for logging.
Starting Serial GReceived SIGCHLD from PID 274 (n/a).
dev-ttyO1.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-omap-omap_uart.1-tty-ttyO1.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
dev-ttyO3.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-omap-omap_uart.3-tty-ttyO3.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
dev-ttyO2.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platfsys-devices-platform-omap3beagle\x2dsoc\x2daudio-sound-card0.device chan
ged dead -> plugged
Trying to enqueue job sound.target/start/fail
Installed new job sound.target/start as 72
Enqueued job sound.target/start as 72
Successfully opened /dev/console for logging.
sound.target changed dead -> active
Job sound.target/start finished, result=done
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
dev-mtdblock0.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-physmap\x2dflash.0-mtd-mtd0-mtdblock0.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
fsck-root.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
dev-mtdblock1.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-physmap\x2dflash.0-mtd-mtd1-mtdblock1.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
systemd-remount-api-vfs.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
dev-mtdblock2.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-physmap\x2dflash.0-mtd-mtd2-mtdblock2.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
udev-trigger.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
dev-ttyS0.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-serial8250-tty-ttyS0.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
remount-rootfs.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
dev-ttyS1.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-serial8250-tty-ttyS1.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
udev-trigger.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
dev-ttyS2.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-serial8250-tty-ttyS2.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
dev-ttyS3.device changed dead -> plugged
Successfully opened /dev/console for logging.
sys-devices-platform-serial8250-tty-ttyS3.device changed dead -> plugged
Successfully opened /dev/console[ 13.883758] ADDRCONF(NETDEV_UP): eth0: link is not rea
dy
for logging.
Running GC...
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
machineid.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
sys-devices-platform-usbhs\x2domap.0-ehci\x2domap.0-usb1-1\x2d2-1\x2d2.1-1\x2d2.1:1.0-net
-eth0.device changed dead -> plugged
Successfully opened /dev/console for logging.
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
run-postinsts.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
systemd-random-seed-load.service: cgroup is empty
Accepted connection on private bus.
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
systemd-tmpfiles-setup.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
systemd-user-sessions.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
polkitd.service: cgroup is empty
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Agent.Released() on /org/freedesktop/systemd1
/agent
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Got D-Bus request: org.freedesktop.systemd1.Manager.StartUnit() on /org/freedesktop/syste
md1
Trying to enqueue job reboot.target/start/replace
Installed new job reboot.target/start as 77
Installed new job reboot.service/start as 78
Installed new job shutdown.target/start as 79
Installed new job systemd-update-utmp-shutdown.service/start as 80
Installed new job systemd-random[ 14.240051] ip_tables: (C) 2000-2006 Netfilter Core Te
am
-seed-save.service/start as 83
Installed new job graphical.target/stop as 90
Installed new job basic.target/stop as 92
Installed new job dbus.service/stop as 93
Installed new job network.service/stop as 94
Installed new job loop.service/stop as 95
Installed new job systemd-user-sessions.service/stop as 96
Installed new job multi-user.target/stop as 98
Installed new job systemd-logind.service/stop as 100
Installed new job serial-getty at ttyO0.service/stop as 101
Installed new job dropbearkey.service/stop as 102
Installed new job connman.service/stop as 104
Installed new job sy[ 14.297821] nf_conntrack version 0.5.0 (7827 buckets, 31308 max)
stemd-tmpfiles-clean.timer/stop as 105
Installed new job dbus.socket/stop as 106
Installed new job network.target/stop as 107
Installed new job remote-fs.target/stop as 108
Installed new job systemd-ask-password-wall.path/stop as 110
Installed new job getty.target/stop as 111
Installed new job local-fs.target/stop as 112
Installed new job systemd-remount-api-vfs.service/stop as 113
Installed new job local-fs-pre.target/stop as 114
Installed new job sockets.target/stop as 117
Installed new job dropbear.socket/stop as 118
Installed new job sysinit.target/stop as 119
Installed new job systemd-ask-password-console.path/stop as 120
Installed new job swap.target/stop as 125
Installed new job remount-rootfs.service/stop as 126
Installed new job sounddbus.socket got notified about service death (failed permanently:
no)
dbus.socket changed running -> listening
Successfully opened /dev/console for logging.
dbus.service changed running -> stop-sigterm
Successfully opened /dev/console for logging.
Starting Save Random Seed...
About to execute: /lib/systemd/systemd-random-seed save
Forked /lib/systemd/systemd-random-seed as 311
systemd-random-seed-save.service changed dead -> start
Successfully opened /dev/console for logging.
Got D-Bus request: org.freedesktop.DBus.Local.Disconnected() on /org/freedesktop/DBus/Loc
al
Received name :1.2 in reply to Hello
Successfully connected to system D-Bus bus b0048be3d448cab6c3fb12fc0000000d as :1.2
Caught <SEGV>, core dump failed.
Freezing execution.
More information about the systemd-devel
mailing list