[systemd-devel] [PATCHv2 1/2] zsh-completion: Use same tab-width for all files
William Giokas
1007380 at gmail.com
Wed Nov 13 20:41:37 PST 2013
Also added a vim line to help keep things this way.
---
shell-completion/zsh/_bootctl | 33 +-
shell-completion/zsh/_hostnamectl | 49 +--
shell-completion/zsh/_journalctl | 157 ++++-----
shell-completion/zsh/_kernel-install | 32 +-
shell-completion/zsh/_localectl | 131 +++----
shell-completion/zsh/_loginctl | 133 +++----
shell-completion/zsh/_machinectl | 71 ++--
shell-completion/zsh/_sd_hosts_or_user_at_host | 5 +-
shell-completion/zsh/_sd_machines | 1 +
shell-completion/zsh/_sd_outputmodes | 1 +
shell-completion/zsh/_systemctl | 457 +++++++++++++------------
shell-completion/zsh/_systemd | 154 ++++-----
shell-completion/zsh/_systemd-analyze | 65 ++--
shell-completion/zsh/_systemd-coredumpctl | 57 +--
shell-completion/zsh/_systemd-delta | 19 +-
shell-completion/zsh/_systemd-inhibit | 47 +--
shell-completion/zsh/_systemd-nspawn | 37 +-
shell-completion/zsh/_systemd-run | 1 +
shell-completion/zsh/_systemd-tmpfiles | 15 +-
shell-completion/zsh/_timedatectl | 91 ++---
shell-completion/zsh/_udevadm | 207 +++++------
21 files changed, 891 insertions(+), 872 deletions(-)
diff --git a/shell-completion/zsh/_bootctl b/shell-completion/zsh/_bootctl
index 7d2453c..17ff0d4 100644
--- a/shell-completion/zsh/_bootctl
+++ b/shell-completion/zsh/_bootctl
@@ -2,24 +2,25 @@
(( $+functions[_bootctl_command] )) || _bootctl_command()
{
- local -a _bootctl_cmds
- _bootctl_cmds=(
- "status:Show current firmware and boot settings"
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'bootctl command' _bootctl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
- cmd="${${_bootctl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $+functions[_bootctl_$cmd] )); then
- _bootctl_$cmd
+ local -a _bootctl_cmds
+ _bootctl_cmds=(
+ "status:Show current firmware and boot settings"
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'bootctl command' _bootctl_cmds || compadd "$@"
else
- _message "no more options"
+ local curcontext="$curcontext"
+ cmd="${${_bootctl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $+functions[_bootctl_$cmd] )); then
+ _bootctl_$cmd
+ else
+ _message "no more options"
+ fi
fi
- fi
}
_arguments \
- {-h,--help}'[Prints a short help text and exits.]' \
- '--version[Prints a short version string and exits.]' \
- '*::bootctl command:_bootctl_command'
+ {-h,--help}'[Prints a short help text and exits.]' \
+ '--version[Prints a short version string and exits.]' \
+ '*::bootctl command:_bootctl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_hostnamectl b/shell-completion/zsh/_hostnamectl
index 45b9597..7d7baeb 100644
--- a/shell-completion/zsh/_hostnamectl
+++ b/shell-completion/zsh/_hostnamectl
@@ -1,32 +1,33 @@
#compdef hostnamectl
_hostnamectl_command() {
- local -a _hostnamectl_cmds
- _hostnamectl_cmds=(
- "status:Show current hostname settings"
- "set-hostname:Set system hostname"
- "set-icon-name:Set icon name for host"
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
- cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
- _message "$msg"
+ local -a _hostnamectl_cmds
+ _hostnamectl_cmds=(
+ "status:Show current hostname settings"
+ "set-hostname:Set system hostname"
+ "set-icon-name:Set icon name for host"
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
else
- _message "unknown hostnamectl command: $words[1]"
+ local curcontext="$curcontext"
+ cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
+ _message "$msg"
+ else
+ _message "unknown hostnamectl command: $words[1]"
+ fi
fi
- fi
}
_arguments -s \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--transient[Only set transient hostname]' \
- '--static[Only set static hostname]' \
- '--pretty[Only set pretty hostname]' \
- '--no-ask-password[Do not prompt for password]' \
- {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
- '*::hostnamectl commands:_hostnamectl_command'
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--transient[Only set transient hostname]' \
+ '--static[Only set static hostname]' \
+ '--pretty[Only set pretty hostname]' \
+ '--no-ask-password[Do not prompt for password]' \
+ {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
+ '*::hostnamectl commands:_hostnamectl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_journalctl b/shell-completion/zsh/_journalctl
index d94c1e4..b518e35 100644
--- a/shell-completion/zsh/_journalctl
+++ b/shell-completion/zsh/_journalctl
@@ -1,93 +1,94 @@
#compdef journalctl
_list_fields() {
- local -a journal_fields
- journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
- ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
- _{P,U,G}ID _COMM _EXE _CMDLINE
- _AUDIT_{SESSION,LOGINUID}
- _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
- _SYSTEMD_USER_UNIT USER_UNIT
- _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
- _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
- _KERNEL_{DEVICE,SUBSYSTEM}
- _UDEV_{SYSNAME,DEVNODE,DEVLINK}
- __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
- case $_jrnl_none in
- yes) _values -s '=' 'possible fields' \
- "${journal_fields[@]}:value:_journal_fields ${words[CURRENT]%%=*}" ;;
- *) _describe 'possible fields' journal_fields ;;
- esac
+ local -a journal_fields
+ journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
+ ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
+ _{P,U,G}ID _COMM _EXE _CMDLINE
+ _AUDIT_{SESSION,LOGINUID}
+ _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
+ _SYSTEMD_USER_UNIT USER_UNIT
+ _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
+ _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
+ _KERNEL_{DEVICE,SUBSYSTEM}
+ _UDEV_{SYSNAME,DEVNODE,DEVLINK}
+ __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
+ case $_jrnl_none in
+ yes) _values -s '=' 'possible fields' \
+ "${journal_fields[@]}:value:_journal_fields ${words[CURRENT]%%=*}" ;;
+ *) _describe 'possible fields' journal_fields ;;
+ esac
}
_journal_none() {
- local -a _commands _files _jrnl_none
- # Setting use-cache will slow this down considerably
- _commands=( ${"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
- _jrnl_none='yes'
- _alternative : \
- 'files:/dev files:_files -W /dev -P /dev/' \
- "commands:commands:($_commands[@])" \
- 'fields:fields:_list_fields'
+ local -a _commands _files _jrnl_none
+ # Setting use-cache will slow this down considerably
+ _commands=( ${"$(_call_program commands "$service" -F _EXE 2>/dev/null)"} )
+ _jrnl_none='yes'
+ _alternative : \
+ 'files:/dev files:_files -W /dev -P /dev/' \
+ "commands:commands:($_commands[@])" \
+ 'fields:fields:_list_fields'
}
_journal_fields() {
- local -a _fields cmd
- cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
- _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
- typeset -U _fields
- _describe 'possible values' _fields
+ local -a _fields cmd
+ cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
+ _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
+ typeset -U _fields
+ _describe 'possible values' _fields
}
_journal_boots() {
- local -a _bootid _previousboots
- _bootid=( ${(fao)"$(_call_program bootid "$service -F _BOOT_ID")"} )
- _previousboots=( -{1..${#_bootid}} )
- _alternative : \
- "offsets:boot offsets:(${_previousboots[1,-2]})" \
- "bootid:boot ids:(${_bootid[@]})"
+ local -a _bootid _previousboots
+ _bootid=( ${(fao)"$(_call_program bootid "$service -F _BOOT_ID")"} )
+ _previousboots=( -{1..${#_bootid}} )
+ _alternative : \
+ "offsets:boot offsets:(${_previousboots[1,-2]})" \
+ "bootid:boot ids:(${_bootid[@]})"
}
_arguments -s \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--no-pager[Do not pipe output into a pager]' \
- {-l,--full}'[Show long fields in full]' \
- {-a,--all}'[Show all fields, including long and unprintable]' \
- {-f,--follow}'[Follow journal]' \
- {-e,--pager-end}'[Jump to the end of the journal in the pager]' \
- {-n+,--lines=}'[Number of journal entries to show]:integer' \
- '--no-tail[Show all lines, even in follow mode]' \
- {-r,--reverse}'[Reverse output]' \
- {-o+,--output=}'[Change journal output mode]:output modes:_sd_outputmodes' \
- {-x,--catalog}'[Show explanatory texts with each log line]' \
- {-q,--quiet}"[Don't show privilege warning]" \
- {-m,--merge}'[Show entries from all available journals]' \
- {-b+,--boot=}'[Show data only from the specified boot or offset]:boot id or offset:_journal_boots' \
- '--list-boots[List boots ordered by time]' \
- {-k,--dmesg}'[Show only kernel messages, Implies -b]' \
- {-u+,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
- '--user-unit=[Show data only from the specified user session unit]:units:_journal_fields USER_UNIT' \
- {-p+,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
- {-c+,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
- '--after-cursor=[Start showing entries from the location in the journal after the cursor]:cursors:_journal_fields __CURSORS' \
- '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
- '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
- {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
- '--system[Show system and kernel messages]' \
- '--user[Show messages from user services]' \
- {-D+,--directory=}'[Show journal files from directory]:directories:_directories' \
- '--file=[Operate on specified journal files]:file:_files' \
- '--root=[Operate on catalog hierarchy under specified directory]:directories:_directories' \
- '--new-id128[Generate a new 128 Bit ID]' \
- '--header[Show journal header information]' \
- '--disk-usage[Show total disk usage]' \
- '--list-catalog[List messages in catalog]' \
- '--dump-catalog[Dump messages in catalog]' \
- '--update-catalog[Update binary catalog database]' \
- '--setup-keys[Generate new FSS key pair]' \
- '--force[Force recreation of FSS keys]' \
- '--interval=[Time interval for changing the FSS sealing key]:time interval' \
- '--verify[Verify journal file consistency]' \
- '--verify-key=[Specify FSS verification key]:FSS key' \
- '*::default: _journal_none'
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ {-l,--full}'[Show long fields in full]' \
+ {-a,--all}'[Show all fields, including long and unprintable]' \
+ {-f,--follow}'[Follow journal]' \
+ {-e,--pager-end}'[Jump to the end of the journal in the pager]' \
+ {-n+,--lines=}'[Number of journal entries to show]:integer' \
+ '--no-tail[Show all lines, even in follow mode]' \
+ {-r,--reverse}'[Reverse output]' \
+ {-o+,--output=}'[Change journal output mode]:output modes:_sd_outputmodes' \
+ {-x,--catalog}'[Show explanatory texts with each log line]' \
+ {-q,--quiet}"[Don't show privilege warning]" \
+ {-m,--merge}'[Show entries from all available journals]' \
+ {-b+,--boot=}'[Show data only from the specified boot or offset]:boot id or offset:_journal_boots' \
+ '--list-boots[List boots ordered by time]' \
+ {-k,--dmesg}'[Show only kernel messages, Implies -b]' \
+ {-u+,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
+ '--user-unit=[Show data only from the specified user session unit]:units:_journal_fields USER_UNIT' \
+ {-p+,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
+ {-c+,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
+ '--after-cursor=[Start showing entries from the location in the journal after the cursor]:cursors:_journal_fields __CURSORS' \
+ '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
+ '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
+ {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
+ '--system[Show system and kernel messages]' \
+ '--user[Show messages from user services]' \
+ {-D+,--directory=}'[Show journal files from directory]:directories:_directories' \
+ '--file=[Operate on specified journal files]:file:_files' \
+ '--root=[Operate on catalog hierarchy under specified directory]:directories:_directories' \
+ '--new-id128[Generate a new 128 Bit ID]' \
+ '--header[Show journal header information]' \
+ '--disk-usage[Show total disk usage]' \
+ '--list-catalog[List messages in catalog]' \
+ '--dump-catalog[Dump messages in catalog]' \
+ '--update-catalog[Update binary catalog database]' \
+ '--setup-keys[Generate new FSS key pair]' \
+ '--force[Force recreation of FSS keys]' \
+ '--interval=[Time interval for changing the FSS sealing key]:time interval' \
+ '--verify[Verify journal file consistency]' \
+ '--verify-key=[Specify FSS verification key]:FSS key' \
+ '*::default: _journal_none'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_kernel-install b/shell-completion/zsh/_kernel-install
index 0655188..3bc29fd 100644
--- a/shell-completion/zsh/_kernel-install
+++ b/shell-completion/zsh/_kernel-install
@@ -1,26 +1,26 @@
#compdef kernel-install
_images(){
- if [[ "$words[2]" == "remove" ]]; then
- _message 'No more options'
- else
- _path_files -W /boot/ -P /boot/ -g "vmlinuz-*"
- fi
+ if [[ "$words[2]" == "remove" ]]; then
+ _message 'No more options'
+ else
+ _path_files -W /boot/ -P /boot/ -g "vmlinuz-*"
+ fi
}
_kernels(){
- read _MACHINE_ID < /etc/machine-id
- _kernel=( /lib/modules/[0-9]* )
- if [[ "$cmd" == "remove" && -n "$_MACHINE_ID" ]]; then
- _kernel=( /lib/modules/[0-9]* "/boot/$_MACHINE_ID"/[0-9]* )
- fi
- _kernel=( ${_kernel##*/} )
- _describe "installed kernels" _kernel
+ read _MACHINE_ID < /etc/machine-id
+ _kernel=( /lib/modules/[0-9]* )
+ if [[ "$cmd" == "remove" && -n "$_MACHINE_ID" ]]; then
+ _kernel=( /lib/modules/[0-9]* "/boot/$_MACHINE_ID"/[0-9]* )
+ fi
+ _kernel=( ${_kernel##*/} )
+ _describe "installed kernels" _kernel
}
_arguments \
- '1::add or remove:(add remove)' \
- '2::kernel versions:_kernels' \
- '3::kernel images:_images'
+ '1::add or remove:(add remove)' \
+ '2::kernel versions:_kernels' \
+ '3::kernel images:_images'
-#vim: set ft=zsh sw=4 ts=4 et
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_localectl b/shell-completion/zsh/_localectl
index 3d76bb0..1e3cf03 100644
--- a/shell-completion/zsh/_localectl
+++ b/shell-completion/zsh/_localectl
@@ -1,83 +1,84 @@
#compdef localectl
_localectl_set-locale() {
- local -a _confs _locales
- local expl suf
- _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
- _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
- if [[ -prefix 1 *\= ]]; then
- local conf=${PREFIX%%\=*}
- compset -P1 '*='
- _wanted locales expl "locales configs" \
- _combination localeconfs confs=$conf locales "$@" -
- else
- compadd -S '=' $_confs
- fi
+ local -a _confs _locales
+ local expl suf
+ _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
+ _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
+ if [[ -prefix 1 *\= ]]; then
+ local conf=${PREFIX%%\=*}
+ compset -P1 '*='
+ _wanted locales expl "locales configs" \
+ _combination localeconfs confs=$conf locales "$@" -
+ else
+ compadd -S '=' $_confs
+ fi
}
_localectl_set-keymap() {
- local -a _keymaps
- _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
- if (( CURRENT <= 3 )); then
- _describe keymaps _keymaps
- else
- _message "no more options"
- fi
+ local -a _keymaps
+ _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
+ if (( CURRENT <= 3 )); then
+ _describe keymaps _keymaps
+ else
+ _message "no more options"
+ fi
}
_localectl_set-x11-keymap() {
- if (( $+commands[pkg-config] )); then
- local -a _file _layout _model _variant _options
- local _xorg_lst
- _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
- _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
- _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
- _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
- _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
- _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
- #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
- #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
- #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
- #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
+ if (( $+commands[pkg-config] )); then
+ local -a _file _layout _model _variant _options
+ local _xorg_lst
+ _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
+ _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
+ _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
+ _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
+ _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
+ _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
+ #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
+ #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
+ #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
+ #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
- case $CURRENT in
- 2) _describe layouts _layout ;;
- 3) _describe models _model;;
- 4) _describe variants _variant;;
- 5) _describe options _options;;
- *) _message "no more options"
- esac
- fi
+ case $CURRENT in
+ 2) _describe layouts _layout ;;
+ 3) _describe models _model;;
+ 4) _describe variants _variant;;
+ 5) _describe options _options;;
+ *) _message "no more options"
+ esac
+ fi
}
_localectl_command() {
- local -a _localectl_cmds
- _localectl_cmds=(
- 'status:Show current locale settings'
- 'set-locale:Set system locale'
- 'list-locales:Show known locales'
- 'set-keymap:Set virtual console keyboard mapping'
- 'list-keymaps:Show known virtual console keyboard mappings'
- 'set-x11-keymap:Set X11 keyboard mapping'
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'localectl command' _localectl_cmds
- else
- local curcontext="$curcontext"
- cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $+functions[_localectl_$cmd] )); then
- _localectl_$cmd
+ local -a _localectl_cmds
+ _localectl_cmds=(
+ 'status:Show current locale settings'
+ 'set-locale:Set system locale'
+ 'list-locales:Show known locales'
+ 'set-keymap:Set virtual console keyboard mapping'
+ 'list-keymaps:Show known virtual console keyboard mappings'
+ 'set-x11-keymap:Set X11 keyboard mapping'
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'localectl command' _localectl_cmds
else
- _message "no more options"
+ local curcontext="$curcontext"
+ cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $+functions[_localectl_$cmd] )); then
+ _localectl_$cmd
+ else
+ _message "no more options"
+ fi
fi
- fi
}
_arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- "--no-convert[Don't convert keyboard mappings]" \
- '--no-pager[Do not pipe output into a pager]' \
- '--no-ask-password[Do not prompt for password]' \
- {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
- '*::localectl commands:_localectl_command'
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ "--no-convert[Don't convert keyboard mappings]" \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--no-ask-password[Do not prompt for password]' \
+ {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
+ '*::localectl commands:_localectl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_loginctl b/shell-completion/zsh/_loginctl
index ebf6b3a..8615a02 100644
--- a/shell-completion/zsh/_loginctl
+++ b/shell-completion/zsh/_loginctl
@@ -6,41 +6,41 @@ _loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while r
# Completion functions for SESSIONS
for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
- (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
- {
- _loginctl_all_sessions
- compadd "$@" -a - _sys_all_sessions
- }
+ (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
+ {
+ _loginctl_all_sessions
+ compadd "$@" -a - _sys_all_sessions
+ }
done
# Completion functions for USERS
for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
- (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
- {
- _loginctl_all_users
- compadd "$@" -a - _sys_all_users
- }
+ (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
+ {
+ _loginctl_all_users
+ compadd "$@" -a - _sys_all_users
+ }
done
# Completion functions for SEATS
(( $+functions[_loginctl_seats] )) || _loginctl_seats()
{
- _loginctl_all_seats
- compadd "$@" -a - _sys_all_seats
+ _loginctl_all_seats
+ compadd "$@" -a - _sys_all_seats
}
for fun in seat-status show-seat terminate-seat ; do
- (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
- { _loginctl_seats }
+ (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
+ { _loginctl_seats }
done
# Completion functions for ATTACH
(( $+functions[_loginctl_attach] )) || _loginctl_attach()
{
- _loginctl_all_seats
+ _loginctl_all_seats
- _arguments -w -C -S -s \
- ':seat:_loginctl_seats' \
- '*:device:_files'
+ _arguments -w -C -S -s \
+ ':seat:_loginctl_seats' \
+ '*:device:_files'
}
# no loginctl completion for:
@@ -48,59 +48,60 @@ done
(( $+functions[_loginctl_command] )) || _loginctl_command()
{
- local -a _loginctl_cmds
- _loginctl_cmds=(
- "list-sessions:List sessions"
- "session-status:Show session status"
- "show-session:Show properties of one or more sessions"
- "activate:Activate a session"
- "lock-session:Screen lock one or more sessions"
- "unlock-session:Screen unlock one or more sessions"
- "terminate-session:Terminate one or more sessions"
- "kill-session:Send signal to processes of a session"
- "list-users:List users"
- "user-status:Show user status"
- "show-user:Show properties of one or more users"
- "enable-linger:Enable linger state of one or more users"
- "disable-linger:Disable linger state of one or more users"
- "terminate-user:Terminate all sessions of one or more users"
- "kill-user:Send signal to processes of a user"
- "list-seats:List seats"
- "seat-status:Show seat status"
- "show-seat:Show properties of one or more seats"
- "attach:Attach one or more devices to a seat"
- "flush-devices:Flush all device associations"
- "terminate-seat:Terminate all sessions on one or more seats"
- )
+ local -a _loginctl_cmds
+ _loginctl_cmds=(
+ "list-sessions:List sessions"
+ "session-status:Show session status"
+ "show-session:Show properties of one or more sessions"
+ "activate:Activate a session"
+ "lock-session:Screen lock one or more sessions"
+ "unlock-session:Screen unlock one or more sessions"
+ "terminate-session:Terminate one or more sessions"
+ "kill-session:Send signal to processes of a session"
+ "list-users:List users"
+ "user-status:Show user status"
+ "show-user:Show properties of one or more users"
+ "enable-linger:Enable linger state of one or more users"
+ "disable-linger:Disable linger state of one or more users"
+ "terminate-user:Terminate all sessions of one or more users"
+ "kill-user:Send signal to processes of a user"
+ "list-seats:List seats"
+ "seat-status:Show seat status"
+ "show-seat:Show properties of one or more seats"
+ "attach:Attach one or more devices to a seat"
+ "flush-devices:Flush all device associations"
+ "terminate-seat:Terminate all sessions on one or more seats"
+ )
- if (( CURRENT == 1 )); then
- _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
+ else
+ local curcontext="$curcontext"
- cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
+ cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
+ if (( $#cmd )); then
+ curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
- _call_function ret _loginctl_$cmd || _message 'no more arguments'
- else
- _message "unknown loginctl command: $words[1]"
- fi
- return ret
- fi
+ _call_function ret _loginctl_$cmd || _message 'no more arguments'
+ else
+ _message "unknown loginctl command: $words[1]"
+ fi
+ return ret
+ fi
}
_arguments -s \
- {-h,--help}'[Show help]' \
- '--version[Show package version]' \
- \*{-p+,--property=}'[Show only properties by this name]:unit property' \
- {-a,--all}'[Show all properties, including empty ones]' \
- '--kill-who=[Who to send signal to]:killwho:(main control all)' \
- {-s+,--signal=}'[Which signal to send]:signal:_signals' \
- '--no-ask-password[Do not ask for system passwords]' \
- {-H+,--host=}'[Show information for remote host]:userathost:_sd_hosts_or_user_at_host' \
- {-P,--privileged}'[Acquire privileges before execution]' \
- '--no-pager[Do not pipe output into a pager]' \
- '*::loginctl command:_loginctl_command'
+ {-h,--help}'[Show help]' \
+ '--version[Show package version]' \
+ \*{-p+,--property=}'[Show only properties by this name]:unit property' \
+ {-a,--all}'[Show all properties, including empty ones]' \
+ '--kill-who=[Who to send signal to]:killwho:(main control all)' \
+ {-s+,--signal=}'[Which signal to send]:signal:_signals' \
+ '--no-ask-password[Do not ask for system passwords]' \
+ {-H+,--host=}'[Show information for remote host]:userathost:_sd_hosts_or_user_at_host' \
+ {-P,--privileged}'[Acquire privileges before execution]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '*::loginctl command:_loginctl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_machinectl b/shell-completion/zsh/_machinectl
index 026d74f..b3796c0 100644
--- a/shell-completion/zsh/_machinectl
+++ b/shell-completion/zsh/_machinectl
@@ -2,41 +2,42 @@
(( $+functions[_machinectl_command] )) || _machinectl_command()
{
- local -a _machinectl_cmds
- _machinectl_cmds=(
- "list:List currently running VMs/containers"
- "status:Show VM/container status"
- "show:Show properties of one or more VMs/containers"
- "terminate:Terminate one or more VMs/containers"
- "kill:Send signal to process or a VM/container"
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
- cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- case $cmd in
- list) msg="no options" ;;
- *)
- _sd_machines
- esac
- else
- _message "no more options"
- fi
- fi
+ local -a _machinectl_cmds
+ _machinectl_cmds=(
+ "list:List currently running VMs/containers"
+ "status:Show VM/container status"
+ "show:Show properties of one or more VMs/containers"
+ "terminate:Terminate one or more VMs/containers"
+ "kill:Send signal to process or a VM/container"
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'machinectl command' _machinectl_cmds || compadd "$@"
+ else
+ local curcontext="$curcontext"
+ cmd="${${_machinectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ case $cmd in
+ list) msg="no options" ;;
+ *)
+ _sd_machines
+ esac
+ else
+ _message "no more options"
+ fi
+ fi
}
_arguments \
- {-h,--help}'[Prints a short help text and exits.]' \
- '--version[Prints a short version string and exits.]' \
- \*{-p+,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \
- {-a,--all}'[Show all proerties]' \
- (-l,--full)'[Do not ellipsize cgroup members]' \
- '--no-pager[Do not pipe output into a pager]' \
- '--no-ask-password[Do not ask for system passwords]' \
- '--kill-who=[Who to send signal to]:killwho:(leader all)' \
- {-s+,--signal=}'[Which signal to send]:signal:_signals' \
- {-H+,--host=}'[Show information for remote host]:userathost:_sd_hosts_or_user_at_host' \
- {-P,--privileged}'[Acquire privileges before execution]' \
- '*::machinectl command:_machinectl_command'
+ {-h,--help}'[Prints a short help text and exits.]' \
+ '--version[Prints a short version string and exits.]' \
+ \*{-p+,--property=}'[Limit output to specified property.]:property:(Name Id Timestamp TimestampMonotonic Service Scope Leader Class State RootDirectory)' \
+ {-a,--all}'[Show all proerties]' \
+ (-l,--full)'[Do not ellipsize cgroup members]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--no-ask-password[Do not ask for system passwords]' \
+ '--kill-who=[Who to send signal to]:killwho:(leader all)' \
+ {-s+,--signal=}'[Which signal to send]:signal:_signals' \
+ {-H+,--host=}'[Show information for remote host]:userathost:_sd_hosts_or_user_at_host' \
+ {-P,--privileged}'[Acquire privileges before execution]' \
+ '*::machinectl command:_machinectl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_sd_hosts_or_user_at_host b/shell-completion/zsh/_sd_hosts_or_user_at_host
index 282f732..315d97c 100644
--- a/shell-completion/zsh/_sd_hosts_or_user_at_host
+++ b/shell-completion/zsh/_sd_hosts_or_user_at_host
@@ -1,5 +1,6 @@
#autoload
_alternative \
- 'users-hosts:: _user_at_host' \
- 'hosts:: _hosts'
+ 'users-hosts:: _user_at_host' \
+ 'hosts:: _hosts'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_sd_machines b/shell-completion/zsh/_sd_machines
index 1d64d13..df2f462 100644
--- a/shell-completion/zsh/_sd_machines
+++ b/shell-completion/zsh/_sd_machines
@@ -11,3 +11,4 @@ if [[ -n "$_machines" ]]; then
else
_message 'no machines'
fi
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_sd_outputmodes b/shell-completion/zsh/_sd_outputmodes
index dae8a5c..8877717 100644
--- a/shell-completion/zsh/_sd_outputmodes
+++ b/shell-completion/zsh/_sd_outputmodes
@@ -3,3 +3,4 @@
local -a _output_opts
_output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
_describe -t output 'output mode' _output_opts || compadd "$@"
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemctl b/shell-completion/zsh/_systemctl
index f5680d2..133a550 100644
--- a/shell-completion/zsh/_systemctl
+++ b/shell-completion/zsh/_systemctl
@@ -2,140 +2,140 @@
(( $+functions[_systemctl_command] )) || _systemctl_command()
{
- local -a _systemctl_cmds
- _systemctl_cmds=(
- "list-sockets:List sockets"
- "list-timers:List timers"
- "list-units:List units"
- "start:Start (activate) one or more units"
- "stop:Stop (deactivate) one or more units"
- "reload:Reload one or more units"
- "restart:Start or restart one or more units"
- "condrestart:Restart one or more units if active"
- "try-restart:Restart one or more units if active"
- "reload-or-restart:Reload one or more units if possible, otherwise start or restart"
- "force-reload:Reload one or more units if possible, otherwise restart if active"
- "hibernate:Hibernate the system"
- "hybrid-sleep:Hibernate and suspend the system"
- "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
- "isolate:Start one unit and stop all others"
- "kill:Send signal to processes of a unit"
- "is-active:Check whether units are active"
- "is-failed:Check whether units are failed"
- "status:Show runtime status of one or more units"
- "show:Show properties of one or more units/jobs or the manager"
- "reset-failed:Reset failed state for all, one, or more units"
- "load:Load one or more units"
- "list-unit-files:List installed unit files"
- "enable:Enable one or more unit files"
- "disable:Disable one or more unit files"
- "reenable:Reenable one or more unit files"
- "preset:Enable/disable one or more unit files based on preset configuration"
- "help:Show documentation for specified units"
- "list-dependencies:Show unit dependency tree"
- "mask:Mask one or more units"
- "unmask:Unmask one or more units"
- "link:Link one or more units files into the search path"
- "is-enabled:Check whether unit files are enabled"
- "list-jobs:List jobs"
- "cancel:Cancel all, one, or more jobs"
- "snapshot:Create a snapshot"
- "delete:Remove one or more snapshots"
- "show-environment:Dump environment"
- "set-environment:Set one or more environment variables"
- "unset-environment:Unset one or more environment variables"
- "daemon-reload:Reload systemd manager configuration"
- "daemon-reexec:Reexecute systemd manager"
- "default:Enter system default mode"
- "rescue:Enter system rescue mode"
- "emergency:Enter system emergency mode"
- "halt:Shut down and halt the system"
- "suspend:Suspend the system"
- "poweroff:Shut down and power-off the system"
- "reboot:Shut down and reboot the system"
- "kexec:Shut down and reboot the system with kexec"
- "exit:Ask for user instance termination"
- )
-
- if (( CURRENT == 1 )); then
- _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
- else
- local curcontext="$curcontext"
-
- cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
- # Deal with any aliases
- case $cmd in
- condrestart) cmd="try-restart";;
- force-reload) cmd="reload-or-try-restart";;
- esac
-
- if (( $#cmd )); then
- curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
-
- local update_policy
- zstyle -s ":completion:${curcontext}:" cache-policy update_policy
- if [[ -z "$update_policy" ]]; then
- zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
- fi
-
- _call_function ret _systemctl_$cmd || _message 'no more arguments'
- else
- _message "unknown systemctl command: $words[1]"
- fi
- return ret
- fi
+ local -a _systemctl_cmds
+ _systemctl_cmds=(
+ "list-sockets:List sockets"
+ "list-timers:List timers"
+ "list-units:List units"
+ "start:Start (activate) one or more units"
+ "stop:Stop (deactivate) one or more units"
+ "reload:Reload one or more units"
+ "restart:Start or restart one or more units"
+ "condrestart:Restart one or more units if active"
+ "try-restart:Restart one or more units if active"
+ "reload-or-restart:Reload one or more units if possible, otherwise start or restart"
+ "force-reload:Reload one or more units if possible, otherwise restart if active"
+ "hibernate:Hibernate the system"
+ "hybrid-sleep:Hibernate and suspend the system"
+ "reload-or-try-restart:Reload one or more units if possible, otherwise restart if active"
+ "isolate:Start one unit and stop all others"
+ "kill:Send signal to processes of a unit"
+ "is-active:Check whether units are active"
+ "is-failed:Check whether units are failed"
+ "status:Show runtime status of one or more units"
+ "show:Show properties of one or more units/jobs or the manager"
+ "reset-failed:Reset failed state for all, one, or more units"
+ "load:Load one or more units"
+ "list-unit-files:List installed unit files"
+ "enable:Enable one or more unit files"
+ "disable:Disable one or more unit files"
+ "reenable:Reenable one or more unit files"
+ "preset:Enable/disable one or more unit files based on preset configuration"
+ "help:Show documentation for specified units"
+ "list-dependencies:Show unit dependency tree"
+ "mask:Mask one or more units"
+ "unmask:Unmask one or more units"
+ "link:Link one or more units files into the search path"
+ "is-enabled:Check whether unit files are enabled"
+ "list-jobs:List jobs"
+ "cancel:Cancel all, one, or more jobs"
+ "snapshot:Create a snapshot"
+ "delete:Remove one or more snapshots"
+ "show-environment:Dump environment"
+ "set-environment:Set one or more environment variables"
+ "unset-environment:Unset one or more environment variables"
+ "daemon-reload:Reload systemd manager configuration"
+ "daemon-reexec:Reexecute systemd manager"
+ "default:Enter system default mode"
+ "rescue:Enter system rescue mode"
+ "emergency:Enter system emergency mode"
+ "halt:Shut down and halt the system"
+ "suspend:Suspend the system"
+ "poweroff:Shut down and power-off the system"
+ "reboot:Shut down and reboot the system"
+ "kexec:Shut down and reboot the system with kexec"
+ "exit:Ask for user instance termination"
+ )
+
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
+ else
+ local curcontext="$curcontext"
+
+ cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
+ # Deal with any aliases
+ case $cmd in
+ condrestart) cmd="try-restart";;
+ force-reload) cmd="reload-or-try-restart";;
+ esac
+
+ if (( $#cmd )); then
+ curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
+
+ local update_policy
+ zstyle -s ":completion:${curcontext}:" cache-policy update_policy
+ if [[ -z "$update_policy" ]]; then
+ zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
+ fi
+
+ _call_function ret _systemctl_$cmd || _message 'no more arguments'
+ else
+ _message "unknown systemctl command: $words[1]"
+ fi
+ return ret
+ fi
}
__systemctl()
{
- local -a _modes
- _modes=("--user" "--system")
- systemctl ${words:*_modes} --full --no-legend --no-pager "$@"
+ local -a _modes
+ _modes=("--user" "--system")
+ systemctl ${words:*_modes} --full --no-legend --no-pager "$@"
}
# Fills the unit list
_systemctl_all_units()
{
- if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
- ! _retrieve_cache SYS_ALL_UNITS;
- then
- _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) )
- _store_cache SYS_ALL_UNITS _sys_all_units
- fi
+ if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
+ ! _retrieve_cache SYS_ALL_UNITS;
+ then
+ _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo " $a"; done; }) )
+ _store_cache SYS_ALL_UNITS _sys_all_units
+ fi
}
# Fills the unit list including all file units
_systemctl_really_all_units()
{
- local -a all_unit_files;
- local -a really_all_units;
- if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
- ! _retrieve_cache SYS_REALLY_ALL_UNITS;
- then
- all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) )
- _systemctl_all_units
- really_all_units=($_sys_all_units $all_unit_files)
- _sys_really_all_units=(${(u)really_all_units})
- _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
- fi
+ local -a all_unit_files;
+ local -a really_all_units;
+ if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
+ ! _retrieve_cache SYS_REALLY_ALL_UNITS;
+ then
+ all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo " $a"; done; }) )
+ _systemctl_all_units
+ really_all_units=($_sys_all_units $all_unit_files)
+ _sys_really_all_units=(${(u)really_all_units})
+ _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
+ fi
}
_filter_units_by_property() {
- local property=$1 value=$2 ; shift ; shift
- local -a units ; units=($*)
- local prop unit
- for ((i=1; $i <= ${#units[*]}; i++)); do
- # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
- # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
- # revert to calling 'systemctl show' once for all units, which is way
- # faster
- unit=${units[i]}
- prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
- if [[ "${prop}" = "$property=$value" ]]; then
- echo " ${unit}"
- fi
- done
+ local property=$1 value=$2 ; shift ; shift
+ local -a units ; units=($*)
+ local prop unit
+ for ((i=1; $i <= ${#units[*]}; i++)); do
+ # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
+ # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
+ # revert to calling 'systemctl show' once for all units, which is way
+ # faster
+ unit=${units[i]}
+ prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
+ if [[ "${prop}" = "$property=$value" ]]; then
+ echo " ${unit}"
+ fi
+ done
}
_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo " $a"; done; }) )}
@@ -147,118 +147,118 @@ _systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files
# Completion functions for ALL_UNITS
for fun in is-active is-failed is-enabled status show mask preset help list-dependencies ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_really_all_units
- compadd "$@" -a - _sys_really_all_units
- }
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_really_all_units
+ compadd "$@" -a - _sys_really_all_units
+ }
done
# Completion functions for ENABLED_UNITS
for fun in disable reenable ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_enabled_units
- _systemctl_disabled_units
- compadd "$@" -a - _sys_enabled_units _sys_disabled_units
- }
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_enabled_units
+ _systemctl_disabled_units
+ compadd "$@" -a - _sys_enabled_units _sys_disabled_units
+ }
done
# Completion functions for DISABLED_UNITS
(( $+functions[_systemctl_enable] )) || _systemctl_enable()
{
- _systemctl_disabled_units
- compadd "$@" -a - _sys_disabled_units
+ _systemctl_disabled_units
+ compadd "$@" -a - _sys_disabled_units
}
# Completion functions for FAILED_UNITS
(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
{
- _systemctl_failed_units
- compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
+ _systemctl_failed_units
+ compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
}
# Completion functions for STARTABLE_UNITS
(( $+functions[_systemctl_start] )) || _systemctl_start()
{
- _systemctl_inactive_units
- compadd "$@" -a - _sys_inactive_units
+ _systemctl_inactive_units
+ compadd "$@" -a - _sys_inactive_units
}
# Completion functions for STOPPABLE_UNITS
for fun in stop kill try-restart condrestart ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_active_units
- compadd "$@" - $( _filter_units_by_property CanStop yes \
- ${_sys_active_units[*]} )
- }
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_active_units
+ compadd "$@" - $( _filter_units_by_property CanStop yes \
+ ${_sys_active_units[*]} )
+ }
done
# Completion functions for ISOLATABLE_UNITS
(( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
{
- _systemctl_all_units
- compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
- ${_sys_all_units[*]} )
+ _systemctl_all_units
+ compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
+ ${_sys_all_units[*]} )
}
# Completion functions for RELOADABLE_UNITS
for fun in reload reload-or-try-restart force-reload ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_active_units
- compadd "$@" - $( _filter_units_by_property CanReload yes \
- ${_sys_active_units[*]} )
- }
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_active_units
+ compadd "$@" - $( _filter_units_by_property CanReload yes \
+ ${_sys_active_units[*]} )
+ }
done
# Completion functions for RESTARTABLE_UNITS
for fun in restart reload-or-restart ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- _systemctl_all_units
- compadd "$@" - $( _filter_units_by_property CanStart yes \
- ${_sys_all_units[*]} | while read line; do \
- [[ "$line" =~ \.device$ ]] || echo " $line"; \
- done )
- }
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_all_units
+ compadd "$@" - $( _filter_units_by_property CanStart yes \
+ ${_sys_all_units[*]} | while read line; do \
+ [[ "$line" =~ \.device$ ]] || echo " $line"; \
+ done )
+ }
done
# Completion functions for MASKED_UNITS
(( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
{
- _systemctl_masked_units
- compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
+ _systemctl_masked_units
+ compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
}
# Completion functions for JOBS
(( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
{
- compadd "$@" - $(__systemctl list-jobs \
- | cut -d' ' -f1 2>/dev/null ) || _message "no job found"
+ compadd "$@" - $(__systemctl list-jobs \
+ | cut -d' ' -f1 2>/dev/null ) || _message "no job found"
}
# Completion functions for SNAPSHOTS
(( $+functions[_systemctl_delete] )) || _systemctl_delete()
{
- compadd "$@" - $(__systemctl list-units --type snapshot --all \
- | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found"
+ compadd "$@" - $(__systemctl list-units --type snapshot --all \
+ | cut -d' ' -f1 2>/dev/null ) || _message "no snapshot found"
}
# Completion functions for ENVS
for fun in set-environment unset-environment ; do
- (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
- {
- local fun=$0 ; fun=${fun##_systemctl_}
- local suf
- if [[ "${fun}" = "set-environment" ]]; then
- suf='-S='
- fi
-
- compadd "$@" ${suf} - $(systemctl show-environment \
- | while read line; do echo " ${line%%\=}";done )
- }
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ local fun=$0 ; fun=${fun##_systemctl_}
+ local suf
+ if [[ "${fun}" = "set-environment" ]]; then
+ suf='-S='
+ fi
+
+ compadd "$@" ${suf} - $(systemctl show-environment \
+ | while read line; do echo " ${line%%\=}";done )
+ }
done
(( $+functions[_systemctl_link] )) || _systemctl_link() { _files }
@@ -271,71 +271,72 @@ done
_systemctl_caching_policy()
{
- local _sysunits
- local -a oldcache
+ local _sysunits
+ local -a oldcache
- # rebuild if cache is more than a day old
- oldcache=( "$1"(mh+1) )
- (( $#oldcache )) && return 0
+ # rebuild if cache is more than a day old
+ oldcache=( "$1"(mh+1) )
+ (( $#oldcache )) && return 0
- _sysunits=($(__systemctl --all | cut -d' ' -f1))
+ _sysunits=($(__systemctl --all | cut -d' ' -f1))
- if (( $#_sysunits )); then
- for unit in $_sysunits; do
- [[ "$unit" -nt "$1" ]] && return 0
- done
- fi
+ if (( $#_sysunits )); then
+ for unit in $_sysunits; do
+ [[ "$unit" -nt "$1" ]] && return 0
+ done
+ fi
- return 1
+ return 1
}
_unit_states() {
- local -a _states
- _states=(loaded failed active inactive not-found listening running waiting plugged mounted exited dead masked)
- _values -s , "${_states[@]}"
+ local -a _states
+ _states=(loaded failed active inactive not-found listening running waiting plugged mounted exited dead masked)
+ _values -s , "${_states[@]}"
}
_unit_types() {
- local -a _types
- _types=(automount device mount path service snapshot socket swap target timer)
- _values -s , "${_types[@]}"
+ local -a _types
+ _types=(automount device mount path service snapshot socket swap target timer)
+ _values -s , "${_types[@]}"
}
_arguments -s \
- {-h,--help}'[Show help]' \
- '--version[Show package version]' \
- {-t+,--type=}'[List only units of a particular type]:unit type:_unit_types' \
- '--state=[Display units in the specifyied state]:unit state:_unit_states' \
- \*{-p+,--property=}'[Show only properties by specific name]:unit property' \
- {-a,--all}'[Show all units/properties, including dead/empty ones]' \
- '--reverse[Show reverse dependencies]' \
- '--after[Show units ordered after]' \
- '--before[Show units ordered before]' \
- '--failed[Show only failed units]' \
- {-l,--full}"[Don't ellipsize unit names on output]" \
- '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
- '--show-types[When showing sockets, show socket type]' \
- '--irreversible[Mark transactions as irreversible]' \
- '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
- {-i,--ignore-inhibitors}'[When executing a job, ignore jobs dependencies]' \
- {-q,--quiet}'[Suppress output]' \
- '--no-block[Do not wait until operation finished]' \
- '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
- '--no-pager[Do not pipe output into a pager]' \
- '--system[Connect to system manager]' \
- '--user[Connect to user service manager]' \
- "--no-wall[Don't send wall message before halt/power-off/reboot]" \
- '--global[Enable/disable unit files globally]' \
- "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
- '--no-ask-password[Do not ask for system passwords]' \
- '--kill-who=[Who to send signal to]:killwho:(main control all)' \
- {-s+,--signal=}'[Which signal to send]:signal:_signals' \
- {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
- '--root=[Enable unit files in the specified root directory]:directory:_directories' \
- '--runtime[Enable unit files only temporarily until next reboot]' \
- {-H+,--host=}'[Show information for remote host]:userathost:_sd_hosts_or_user_at_host' \
- {-P,--privileged}'[Acquire privileges before execution]' \
- {-n+,--lines=}'[Journal entries to show]:number of entries' \
- {-o+,--output=}'[Change journal output mode]:modes:_sd_outputmodes' \
- '--plain[When used with list-dependencies, print output as a list]' \
- '*::systemctl command:_systemctl_command'
+ {-h,--help}'[Show help]' \
+ '--version[Show package version]' \
+ {-t+,--type=}'[List only units of a particular type]:unit type:_unit_types' \
+ '--state=[Display units in the specifyied state]:unit state:_unit_states' \
+ \*{-p+,--property=}'[Show only properties by specific name]:unit property' \
+ {-a,--all}'[Show all units/properties, including dead/empty ones]' \
+ '--reverse[Show reverse dependencies]' \
+ '--after[Show units ordered after]' \
+ '--before[Show units ordered before]' \
+ '--failed[Show only failed units]' \
+ {-l,--full}"[Don't ellipsize unit names on output]" \
+ '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
+ '--show-types[When showing sockets, show socket type]' \
+ '--irreversible[Mark transactions as irreversible]' \
+ '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
+ {-i,--ignore-inhibitors}'[When executing a job, ignore jobs dependencies]' \
+ {-q,--quiet}'[Suppress output]' \
+ '--no-block[Do not wait until operation finished]' \
+ '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--system[Connect to system manager]' \
+ '--user[Connect to user service manager]' \
+ "--no-wall[Don't send wall message before halt/power-off/reboot]" \
+ '--global[Enable/disable unit files globally]' \
+ "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
+ '--no-ask-password[Do not ask for system passwords]' \
+ '--kill-who=[Who to send signal to]:killwho:(main control all)' \
+ {-s+,--signal=}'[Which signal to send]:signal:_signals' \
+ {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
+ '--root=[Enable unit files in the specified root directory]:directory:_directories' \
+ '--runtime[Enable unit files only temporarily until next reboot]' \
+ {-H+,--host=}'[Show information for remote host]:userathost:_sd_hosts_or_user_at_host' \
+ {-P,--privileged}'[Acquire privileges before execution]' \
+ {-n+,--lines=}'[Journal entries to show]:number of entries' \
+ {-o+,--output=}'[Change journal output mode]:modes:_sd_outputmodes' \
+ '--plain[When used with list-dependencies, print output as a list]' \
+ '*::systemctl command:_systemctl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd b/shell-completion/zsh/_systemd
index 06f03bd..0c11d89 100644
--- a/shell-completion/zsh/_systemd
+++ b/shell-completion/zsh/_systemd
@@ -2,82 +2,82 @@
local curcontext="$curcontext" state lstate line
case "$service" in
- systemd-ask-password)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--icon=[Icon name]' \
- '--timeout=[Timeout in sec]' \
- '--no-tty[Ask question via agent even on TTY]' \
- '--accept-cached[Accept cached passwords]' \
- '--multiple[List multiple passwords if available]'
- ;;
- systemd-cat)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version.]' \
- {-t+,--identifier=}'[Set syslog identifier.]' \
- {-p+,--priority=}'[Set priority value.]:value:({0..7})' \
- '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
- ':Message'
- ;;
- systemd-cgls)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--no-pager[Do not pipe output into a pager]' \
- {-a,--all}'[Show all groups, including empty]' \
- '-k[Include kernel threads in output]' \
- ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
- ;;
- systemd-cgtop)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Print version and exit]' \
- '(-c -m -i -t)-p[Order by path]' \
- '(-c -p -m -i)-t[Order by number of tasks]' \
- '(-m -p -i -t)-c[Order by CPU load]' \
- '(-c -p -i -t)-m[Order by memory load]' \
- '(-c -m -p -t)-i[Order by IO load]' \
- {-d+,--delay=}'[Specify delay]' \
- {-n+,--iterations=}'[Run for N iterations before exiting]' \
- {-b,--batch}'[Run in batch mode, accepting no input]' \
- '--depth=[Maximum traversal depth]'
- ;;
- systemd-detect-virt)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- {-c,--container}'[Only detect whether we are run in a container]' \
- {-v,--vm}'[Only detect whether we are run in a VM]' \
- {-q,--quiet}"[Don't output anything, just set return value]"
- ;;
- systemd-machine-id-setup)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]'
- ;;
- systemd-notify)
- _arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--ready[Inform the init system about service start-up completion.]' \
- '--pid=[Inform the init system about the main PID of the daemon]' \
- '--status=[Send a free-form status string for the daemon to the init systemd]' \
- '--booted[Returns 0 if the system was booted up with systemd]' \
- '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
- ;;
- systemd-tty-ask-password-agent)
- _arguments \
- {-h,--help}'[Prints a short help text and exits.]' \
- '--version[Prints a short version string and exits.]' \
- '--list[Lists all currently pending system password requests.]' \
- '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
- '--watch[Continuously process password requests.]' \
- '--wall[Forward password requests to wall(1).]' \
- '--plymouth[Ask question with plymouth(8).]' \
- '--console[Ask question on /dev/console.]'
- ;;
- *) _message 'eh?' ;;
+ systemd-ask-password)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--icon=[Icon name]' \
+ '--timeout=[Timeout in sec]' \
+ '--no-tty[Ask question via agent even on TTY]' \
+ '--accept-cached[Accept cached passwords]' \
+ '--multiple[List multiple passwords if available]'
+ ;;
+ systemd-cat)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version.]' \
+ {-t+,--identifier=}'[Set syslog identifier.]' \
+ {-p+,--priority=}'[Set priority value.]:value:({0..7})' \
+ '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
+ ':Message'
+ ;;
+ systemd-cgls)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ {-a,--all}'[Show all groups, including empty]' \
+ '-k[Include kernel threads in output]' \
+ ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
+ ;;
+ systemd-cgtop)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Print version and exit]' \
+ '(-c -m -i -t)-p[Order by path]' \
+ '(-c -p -m -i)-t[Order by number of tasks]' \
+ '(-m -p -i -t)-c[Order by CPU load]' \
+ '(-c -p -i -t)-m[Order by memory load]' \
+ '(-c -m -p -t)-i[Order by IO load]' \
+ {-d+,--delay=}'[Specify delay]' \
+ {-n+,--iterations=}'[Run for N iterations before exiting]' \
+ {-b,--batch}'[Run in batch mode, accepting no input]' \
+ '--depth=[Maximum traversal depth]'
+ ;;
+ systemd-detect-virt)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ {-c,--container}'[Only detect whether we are run in a container]' \
+ {-v,--vm}'[Only detect whether we are run in a VM]' \
+ {-q,--quiet}"[Don't output anything, just set return value]"
+ ;;
+ systemd-machine-id-setup)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]'
+ ;;
+ systemd-notify)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--ready[Inform the init system about service start-up completion.]' \
+ '--pid=[Inform the init system about the main PID of the daemon]' \
+ '--status=[Send a free-form status string for the daemon to the init systemd]' \
+ '--booted[Returns 0 if the system was booted up with systemd]' \
+ '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
+ ;;
+ systemd-tty-ask-password-agent)
+ _arguments \
+ {-h,--help}'[Prints a short help text and exits.]' \
+ '--version[Prints a short version string and exits.]' \
+ '--list[Lists all currently pending system password requests.]' \
+ '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
+ '--watch[Continuously process password requests.]' \
+ '--wall[Forward password requests to wall(1).]' \
+ '--plymouth[Ask question with plymouth(8).]' \
+ '--console[Ask question on /dev/console.]'
+ ;;
+ *) _message 'eh?' ;;
esac
-#vim: set ft=zsh sw=4 ts=4 et
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd-analyze b/shell-completion/zsh/_systemd-analyze
index 2eda5fe..6242e4f 100644
--- a/shell-completion/zsh/_systemd-analyze
+++ b/shell-completion/zsh/_systemd-analyze
@@ -1,44 +1,45 @@
#compdef systemd-analyze
_systemd_analyze_set-log-level() {
- local -a _levels
- _levels=(debug info notice warning err crit alert emerg)
- _describe -t level 'logging level' _levels || compadd "$@"
+ local -a _levels
+ _levels=(debug info notice warning err crit alert emerg)
+ _describe -t level 'logging level' _levels || compadd "$@"
}
_systemd_analyze_command(){
- local -a _systemd_analyze_cmds
- # Descriptions taken from systemd-analyze --help.
- _systemd_analyze_cmds=(
- 'time:Print time spent in the kernel before reaching userspace'
- 'blame:Print list of running units ordered by time to init'
- 'critical-chain:Print a tree of the time critical chain of units'
- 'plot:Output SVG graphic showing service initialization'
- 'dot:Dump dependency graph (in dot(1) format)'
- 'dump:Dump server status'
- 'set-log-level:Set systemd log threshold'
- )
+ local -a _systemd_analyze_cmds
+ # Descriptions taken from systemd-analyze --help.
+ _systemd_analyze_cmds=(
+ 'time:Print time spent in the kernel before reaching userspace'
+ 'blame:Print list of running units ordered by time to init'
+ 'critical-chain:Print a tree of the time critical chain of units'
+ 'plot:Output SVG graphic showing service initialization'
+ 'dot:Dump dependency graph (in dot(1) format)'
+ 'dump:Dump server status'
+ 'set-log-level:Set systemd log threshold'
+ )
- if (( CURRENT == 1 )); then
- _describe "options" _systemd_analyze_cmds
- else
- local curcontext="$curcontext"
- cmd="${${_systemd_analyze_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- if (( $+functions[_systemd_analyze_$cmd] )) && (( CURRENT == 2 )); then
- _systemd_analyze_$cmd
- else
- _message "no more options"
- fi
+ if (( CURRENT == 1 )); then
+ _describe "options" _systemd_analyze_cmds
else
- _message "unknown systemd-analyze command: $words[1]"
+ local curcontext="$curcontext"
+ cmd="${${_systemd_analyze_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ if (( $+functions[_systemd_analyze_$cmd] )) && (( CURRENT == 2 )); then
+ _systemd_analyze_$cmd
+ else
+ _message "no more options"
+ fi
+ else
+ _message "unknown systemd-analyze command: $words[1]"
+ fi
fi
- fi
}
_arguments \
- {-h,--help}'[Show help text.]' \
- '--user[Shows performance data of user sessions instead of the system manager.]' \
- '--order[When generating graph for dot, show only order]' \
- '--require[When generating graph for dot, show only requirement]' \
- '*::systemd-analyze commands:_systemd_analyze_command'
+ {-h,--help}'[Show help text.]' \
+ '--user[Shows performance data of user sessions instead of the system manager.]' \
+ '--order[When generating graph for dot, show only order]' \
+ '--require[When generating graph for dot, show only requirement]' \
+ '*::systemd-analyze commands:_systemd_analyze_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd-coredumpctl b/shell-completion/zsh/_systemd-coredumpctl
index 159e8ee..27ef67b 100644
--- a/shell-completion/zsh/_systemd-coredumpctl
+++ b/shell-completion/zsh/_systemd-coredumpctl
@@ -1,36 +1,37 @@
#compdef systemd-coredumpctl
_systemd-coredumpctl_command(){
- local -a _systemd_coredumpctl_cmds
- _systemd_coredumpctl_cmds=(
- 'list:List available coredumps'
- 'dump:Print coredump to stdout'
- 'gdb:Start gdb on a coredump'
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
- else
- local curcontext="$curcontext"
- local -a _dumps
- cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
- _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
- if [[ -n "$_dumps" ]]; then
- _describe -t pids 'coredumps' _dumps
- else
- _message "no coredumps"
- fi
+ local -a _systemd_coredumpctl_cmds
+ _systemd_coredumpctl_cmds=(
+ 'list:List available coredumps'
+ 'dump:Print coredump to stdout'
+ 'gdb:Start gdb on a coredump'
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
else
- _message "no more options"
+ local curcontext="$curcontext"
+ local -a _dumps
+ cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ # user can set zstyle ':completion:*:*:systemd-coredumpctl:*' sort no for coredumps to be ordered by date, otherwise they get ordered by pid
+ _dumps=( "${(foa)$(systemd-coredumpctl list | awk 'BEGIN{OFS=":"} /^\s/ {sub(/[[ \t]+/, ""); print $5,$0}' 2>/dev/null)}" )
+ if [[ -n "$_dumps" ]]; then
+ _describe -t pids 'coredumps' _dumps
+ else
+ _message "no coredumps"
+ fi
+ else
+ _message "no more options"
+ fi
fi
- fi
}
_arguments \
- {-o+,--output=}'[Write output to FILE]:output file:_files' \
- {-F+,--field=}'[Show field in list output]:field' \
- '--no-pager[Do not pipe output into a pager]' \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
+ {-o+,--output=}'[Write output to FILE]:output file:_files' \
+ {-F+,--field=}'[Show field in list output]:field' \
+ '--no-pager[Do not pipe output into a pager]' \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd-delta b/shell-completion/zsh/_systemd-delta
index 757f1b6..1bec5bd 100644
--- a/shell-completion/zsh/_systemd-delta
+++ b/shell-completion/zsh/_systemd-delta
@@ -1,15 +1,16 @@
#compdef systemd-delta
_delta_type() {
- local -a _delta_types
- _delta_types=(masked equivalent redirected overridden unchanged)
- _values -s , "${_delta_types[@]}"
+ local -a _delta_types
+ _delta_types=(masked equivalent redirected overridden unchanged)
+ _values -s , "${_delta_types[@]}"
}
_arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--no-pager[Do not pipe output into a pager]' \
- '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
- {-t+,--type=}'[Only display a selected set of override types]:types:_delta_type' \
- ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
+ {-t+,--type=}'[Only display a selected set of override types]:types:_delta_type' \
+ ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd-inhibit b/shell-completion/zsh/_systemd-inhibit
index 1ecb6dc..088508c 100644
--- a/shell-completion/zsh/_systemd-inhibit
+++ b/shell-completion/zsh/_systemd-inhibit
@@ -1,33 +1,34 @@
#compdef systemd-inhibit
_systemd_inhibit_command(){
- if (( CURRENT == 1 )); then
- compset -q
- _normal
- else
- local n=${words[(b:2:i)[^-]*]}
- if (( n <= CURRENT )); then
- compset -n $n
- _alternative \
- 'files:file:_files' \
- 'commands:command:_normal' && return 0
+ if (( CURRENT == 1 )); then
+ compset -q
+ _normal
+ else
+ local n=${words[(b:2:i)[^-]*]}
+ if (( n <= CURRENT )); then
+ compset -n $n
+ _alternative \
+ 'files:file:_files' \
+ 'commands:command:_normal' && return 0
+ fi
+ _default
fi
- _default
- fi
}
_inhibit_what() {
- local _inhibit
- _inhibit=(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)
- _values -s : "${_inhibit[@]}"
+ local _inhibit
+ _inhibit=(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)
+ _values -s : "${_inhibit[@]}"
}
_arguments \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--what=[Operations to inhibit]:options:_inhibit_what' \
- '--who=[A descriptive string who is inhibiting]' \
- '--why=[A descriptive string why is being inhibited]' \
- '--mode=[One of block or delay]' \
- '--list[List active inhibitors]' \
- '*:commands:_systemd_inhibit_command'
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--what=[Operations to inhibit]:options:_inhibit_what' \
+ '--who=[A descriptive string who is inhibiting]' \
+ '--why=[A descriptive string why is being inhibited]' \
+ '--mode=[One of block or delay]' \
+ '--list[List active inhibitors]' \
+ '*:commands:_systemd_inhibit_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd-nspawn b/shell-completion/zsh/_systemd-nspawn
index a8c2411..998b5de 100644
--- a/shell-completion/zsh/_systemd-nspawn
+++ b/shell-completion/zsh/_systemd-nspawn
@@ -1,24 +1,25 @@
#compdef systemd-nspawn
_nspawn-caps(){
- local -a _caps
- _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
- CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
- CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
- CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
- CAP_SYS_RESOURCE CAP_SYS_BOOT )
- _values -s , 'capabilities' "$_caps[@]"
+ local -a _caps
+ _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
+ CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
+ CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
+ CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
+ CAP_SYS_RESOURCE CAP_SYS_BOOT )
+ _values -s , 'capabilities' "$_caps[@]"
}
_arguments \
- {-h,--help}'[Show this help]' \
- {--directory=,-D+}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
- {--boot,-b+}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
- {--user=,-u+}'[Run the command under specified user, create home directory and cd into it.]' \
- '--uuid=[Set the specified uuid for the container.]' \
- {--controllers=,-C+}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
- '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
- '--read-only[Mount the root file system read only for the container.]' \
- '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_nspawn-caps' \
- "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
- '-j[Equivalent to --link-journal=guest.]'
+ {-h,--help}'[Show this help]' \
+ {--directory=,-D+}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
+ {--boot,-b+}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
+ {--user=,-u+}'[Run the command under specified user, create home directory and cd into it.]' \
+ '--uuid=[Set the specified uuid for the container.]' \
+ {--controllers=,-C+}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
+ '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
+ '--read-only[Mount the root file system read only for the container.]' \
+ '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_nspawn-caps' \
+ "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
+ '-j[Equivalent to --link-journal=guest.]'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd-run b/shell-completion/zsh/_systemd-run
index 9bb7700..b2697ff 100644
--- a/shell-completion/zsh/_systemd-run
+++ b/shell-completion/zsh/_systemd-run
@@ -31,3 +31,4 @@ _arguments \
{-r,--remain-after-exit}'[Leave service around until explicitly stopped]' \
'--send-sighup[Send SIGHUP when terminating]' \
'*::command:_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_systemd-tmpfiles b/shell-completion/zsh/_systemd-tmpfiles
index 4913ded..1e7285d 100644
--- a/shell-completion/zsh/_systemd-tmpfiles
+++ b/shell-completion/zsh/_systemd-tmpfiles
@@ -1,10 +1,11 @@
#compdef systemd-tmpfiles
_arguments \
- '--create[Create, set ownership/permissions based on the config files.]' \
- '--clean[Clean up all files and directories with an age parameter configured.]' \
- '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
- '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
- '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
- '--help[Prints a short help text and exits.]' \
- '*::files:_files'
+ '--create[Create, set ownership/permissions based on the config files.]' \
+ '--clean[Clean up all files and directories with an age parameter configured.]' \
+ '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
+ '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
+ '--exclude-prefix=[Ignore rules that apply to paths with the specified prefix.]' \
+ '--help[Prints a short help text and exits.]' \
+ '*::files:_files'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_timedatectl b/shell-completion/zsh/_timedatectl
index 987c2de..2962ff7 100644
--- a/shell-completion/zsh/_timedatectl
+++ b/shell-completion/zsh/_timedatectl
@@ -1,65 +1,66 @@
#compdef timedatectl
_timedatectl_set-timezone(){
- local -a _timezones
- _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
- compadd "$_timezones[@]"
+ local -a _timezones
+ _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
+ compadd "$_timezones[@]"
}
_timedatectl_set-time(){
- _message "YYYY-MM-DD HH:MM:SS"
+ _message "YYYY-MM-DD HH:MM:SS"
}
_timedatectl_set-local-rtc(){
- local -a _options
- _options=(
- '0:Maintain RTC in universal time'
- '1:Maintain RTC in local time'
- )
- _describe options _options
+ local -a _options
+ _options=(
+ '0:Maintain RTC in universal time'
+ '1:Maintain RTC in local time'
+ )
+ _describe options _options
}
_timedatectl_set-ntp(){
- local -a _options
- _options=(
- '0:Disable NTP based network time configuration'
- '1:Enable NTP based network time configuration'
- )
- _describe options _options
+ local -a _options
+ _options=(
+ '0:Disable NTP based network time configuration'
+ '1:Enable NTP based network time configuration'
+ )
+ _describe options _options
}
_timedatectl_command(){
- local -a _timedatectl_cmds
- _timedatectl_cmds=(
- 'status:Show current time settings'
- 'set-time:Set system time'
- 'set-timezone:Set system timezone'
- 'list-timezones:Show known timezones'
- 'set-local-rtc:Control whether RTC is in local time'
- 'set-ntp:Control whether NTP is enabled'
- )
- if (( CURRENT == 1 )); then
- _describe -t commands 'timedatectl command' _timedatectl_cmds
- else
- local curcontext="$curcontext"
- cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
- if (( $#cmd )); then
- if (( $+functions[_timedatectl_$cmd] )); then
- _timedatectl_$cmd
- else
- _message "no more options"
- fi
+ local -a _timedatectl_cmds
+ _timedatectl_cmds=(
+ 'status:Show current time settings'
+ 'set-time:Set system time'
+ 'set-timezone:Set system timezone'
+ 'list-timezones:Show known timezones'
+ 'set-local-rtc:Control whether RTC is in local time'
+ 'set-ntp:Control whether NTP is enabled'
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'timedatectl command' _timedatectl_cmds
else
- _message "unknown timedatectl command: $words[1]"
+ local curcontext="$curcontext"
+ cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ if (( $+functions[_timedatectl_$cmd] )); then
+ _timedatectl_$cmd
+ else
+ _message "no more options"
+ fi
+ else
+ _message "unknown timedatectl command: $words[1]"
+ fi
fi
- fi
}
_arguments -s \
- {-h,--help}'[Show this help]' \
- '--version[Show package version]' \
- '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
- '--no-pager[Do not pipe output into a pager]' \
- '--no-ask-password[Do not prompt for password]' \
- {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
- '*::timedatectl commands:_timedatectl_command'
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--no-ask-password[Do not prompt for password]' \
+ {-H+,--host=}'[Operate on remote host]:userathost:_sd_hosts_or_user_at_host' \
+ '*::timedatectl commands:_timedatectl_command'
+# vim: set ft=zsh sw=8 ts=8 et:
diff --git a/shell-completion/zsh/_udevadm b/shell-completion/zsh/_udevadm
index e5d252c..544cf3c 100644
--- a/shell-completion/zsh/_udevadm
+++ b/shell-completion/zsh/_udevadm
@@ -1,141 +1,142 @@
#compdef udevadm
_udevadm_info(){
- _arguments \
- '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
- '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
- '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
- '--root[Print absolute paths in name or symlink query.]' \
- '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
- '--export[Print output as key/value pairs.]' \
- '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
- '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
- '--export-db[Export the content of the udev database.]' \
- '--cleanup-db[Cleanup the udev database.]'
+ _arguments \
+ '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
+ '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
+ '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
+ '--root[Print absolute paths in name or symlink query.]' \
+ '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
+ '--export[Print output as key/value pairs.]' \
+ '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
+ '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
+ '--export-db[Export the content of the udev database.]' \
+ '--cleanup-db[Cleanup the udev database.]'
}
_udevadm_trigger(){
- _arguments \
- '--verbose[Print the list of devices which will be triggered.]' \
- '--dry-run[Do not actually trigger the event.]' \
- '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
- '--action=[Type of event to be triggered.]:actions:(add change remove)' \
- '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
- '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
- '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
- '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
- '--property-match=[Trigger events for devices with a matching property value.]' \
- '--tag-match=property[Trigger events for devices with a matching tag.]' \
- '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
- '--parent-match=[Trigger events for all children of a given device.]'
+ _arguments \
+ '--verbose[Print the list of devices which will be triggered.]' \
+ '--dry-run[Do not actually trigger the event.]' \
+ '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
+ '--action=[Type of event to be triggered.]:actions:(add change remove)' \
+ '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
+ '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
+ '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
+ '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
+ '--property-match=[Trigger events for devices with a matching property value.]' \
+ '--tag-match=property[Trigger events for devices with a matching tag.]' \
+ '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
+ '--parent-match=[Trigger events for all children of a given device.]'
}
_udevadm_settle(){
- _arguments \
- '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
- '--seq-start=[Wait only for events after the given sequence number.]' \
- '--seq-end=[Wait only for events before the given sequence number.]' \
- '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
- '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
- '--help[Print help text.]'
+ _arguments \
+ '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
+ '--seq-start=[Wait only for events after the given sequence number.]' \
+ '--seq-end=[Wait only for events before the given sequence number.]' \
+ '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
+ '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
+ '--help[Print help text.]'
}
_udevadm_control(){
- _arguments \
- '--exit[Signal and wait for systemd-udevd to exit.]' \
- '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
- '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
- '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
- '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
- '--property=[Set a global property for all events.]' \
- '--children-max=[Set the maximum number of events.]' \
- '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
- '--help[Print help text.]'
+ _arguments \
+ '--exit[Signal and wait for systemd-udevd to exit.]' \
+ '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
+ '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
+ '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
+ '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
+ '--property=[Set a global property for all events.]' \
+ '--children-max=[Set the maximum number of events.]' \
+ '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
+ '--help[Print help text.]'
}
_udevadm_monitor(){
- _arguments \
- '--kernel[Print the kernel uevents.]' \
- '--udev[Print the udev event after the rule processing.]' \
- '--property[Also print the properties of the event.]' \
- '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
- '--tag-match=[Filter events by property.]' \
- '--help[Print help text.]'
+ _arguments \
+ '--kernel[Print the kernel uevents.]' \
+ '--udev[Print the udev event after the rule processing.]' \
+ '--property[Also print the properties of the event.]' \
+ '--subsystem-match=[Filter events by subsystem/\[devtype\].]' \
+ '--tag-match=[Filter events by property.]' \
+ '--help[Print help text.]'
}
_udevadm_test(){
- _arguments \
- '--action=[The action string.]:actions:(add change remove)' \
- '--subsystem=[The subsystem string.]' \
- '--help[Print help text.]' \
- '*::devpath:_files -P /sys/ -W /sys'
+ _arguments \
+ '--action=[The action string.]:actions:(add change remove)' \
+ '--subsystem=[The subsystem string.]' \
+ '--help[Print help text.]' \
+ '*::devpath:_files -P /sys/ -W /sys'
}
_udevadm_test-builtin(){
- if (( CURRENT == 2 )); then
- _arguments \
- '--help[Print help text]' \
- '*::builtins:(blkid btrfs hwdb input_id net_id net_setup_link kmod path_id usb_id uaccess)'
- elif (( CURRENT == 3 )); then
- _arguments \
- '--help[Print help text]' \
- '*::syspath:_files -P /sys -W /sys'
- else
+ if (( CURRENT == 2 )); then
_arguments \
- '--help[Print help text]'
- fi
+ '--help[Print help text]' \
+ '*::builtins:(blkid btrfs hwdb input_id net_id net_setup_link kmod path_id usb_id uaccess)'
+ elif (( CURRENT == 3 )); then
+ _arguments \
+ '--help[Print help text]' \
+ '*::syspath:_files -P /sys -W /sys'
+ else
+ _arguments \
+ '--help[Print help text]'
+ fi
}
_udevadm_mounts(){
- local dev_tmp dpath_tmp mp_tmp mline
+ local dev_tmp dpath_tmp mp_tmp mline
- tmp=( "${(@f)$(< /etc/mtab)}" )
- dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
- mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
+ tmp=( "${(@f)$(< /etc/mtab)}" )
+ dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
+ mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
- local MATCH
- mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
- dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
- dev_tmp=( "${(@q)dev_tmp:#/*}" )
+ local MATCH
+ mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
+ dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
+ dev_tmp=( "${(@q)dev_tmp:#/*}" )
- _alternative \
- 'device-paths: device path:compadd -a dpath_tmp' \
- 'directories:mount point:compadd -a mp_tmp'
+ _alternative \
+ 'device-paths: device path:compadd -a dpath_tmp' \
+ 'directories:mount point:compadd -a mp_tmp'
}
_udevadm_command(){
- local -a _udevadm_cmds
- _udevadm_cmds=(
- 'info:query sysfs or the udev database'
- 'trigger:request events from the kernel'
- 'settle:wait for the event queue to finish'
- 'control:control the udev daemon'
- 'monitor:listen to kernel and udev events'
- 'test:test an event run'
- 'test-builtin:test a built-in command'
- )
-
- if ((CURRENT == 1)); then
- _describe -t commands 'udevadm commands' _udevadm_cmds
- else
- local curcontext="$curcontext"
- cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
- if (($#cmd)); then
- if (( $+functions[_udevadm_$cmd] )); then
- _udevadm_$cmd
- else
- _message "no options for $cmd"
- fi
+ local -a _udevadm_cmds
+ _udevadm_cmds=(
+ 'info:query sysfs or the udev database'
+ 'trigger:request events from the kernel'
+ 'settle:wait for the event queue to finish'
+ 'control:control the udev daemon'
+ 'monitor:listen to kernel and udev events'
+ 'test:test an event run'
+ 'test-builtin:test a built-in command'
+ )
+
+ if ((CURRENT == 1)); then
+ _describe -t commands 'udevadm commands' _udevadm_cmds
else
- _message "no more options"
+ local curcontext="$curcontext"
+ cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
+ if (($#cmd)); then
+ if (( $+functions[_udevadm_$cmd] )); then
+ _udevadm_$cmd
+ else
+ _message "no options for $cmd"
+ fi
+ else
+ _message "no more options"
+ fi
fi
- fi
}
_arguments \
- '--debug[Print debug messages to stderr]' \
- '--version[Print version number]' \
- '--help[Print help text]' \
- '*::udevadm commands:_udevadm_command'
+ '--debug[Print debug messages to stderr]' \
+ '--version[Print version number]' \
+ '--help[Print help text]' \
+ '*::udevadm commands:_udevadm_command'
+# vim: set ft=zsh sw=8 ts=8 et:
--
1.8.5.rc1.17.g0ecd94d
More information about the systemd-devel
mailing list