[systemd-devel] Multi seats setup How-to
arnaud gaboury
arnaud.gaboury at gmail.com
Sun Sep 6 07:02:30 PDT 2015
On Sun, Sep 6, 2015 at 3:36 PM, Lennart Poettering
<lennart at poettering.net> wrote:
> On Sun, 06.09.15 13:14, arnaud gaboury (arnaud.gaboury at gmail.com) wrote:
>
>> On Sun, Sep 6, 2015 at 1:08 PM, Lennart Poettering
>> <lennart at poettering.net> wrote:
>> > On Sun, 06.09.15 13:01, arnaud gaboury (arnaud.gaboury at gmail.com) wrote:
>> >
>> >> On Sun, Sep 6, 2015 at 12:53 PM, Lennart Poettering
>> >> <lennart at poettering.net> wrote:
>> >> > On Thu, 03.09.15 13:26, arnaud gaboury (arnaud.gaboury at gmail.com) wrote:
>> >> >
>> >> >> I plan to use the systemd mutli-seat features, but I am not sure at
>> >> >> all how I must proceed and in waht order. I understand the main
>> >> >> principle for mouse and keyboard: detect the device then
>> >> >> $ loginctl attach seatNumber DevicePath
>> >> >> As for the graphic card, I am lost.
>> >> >>
>> >> >> OS: Fedora 22
>> >> >> gdm
>> >> >> 1 nvidia card
>> >> >> 1 USB3 plugable dockin station for the second monitor
>> >> >
>> >> > I presume this hardware is not marked for "auto seat" yet, using
>> >> > udev's ID_AUTO_SEAT property. If you let me know USB product and
>> >> > vendor id of this device (as reported by lsusb in hex) I'll add it to
>> >> > the default rules files. If that's done then just plugging in the
>> >> > device will make it a new seat, without any configuration.
>> >>
>> >>
>> >> Bus 002 Device 005: ID 17e9:4323 DisplayLink
>> >
>> > The docking station probably is an USB hub with the displaylink device
>> > connected to it. the vendor/product ID i am interested in is the id of
>> > that hub, i.e. the top-level device in the docking station device.
>>
>> If it can help, here is the udev rule and service shipped with the rpm:
>>
>> displaylink.service
>> -------------------------------
>> [Unit]
>> Description=DisplayLink Manager Service
>> After=display-manager.service
>> Conflicts=getty at tty7.service
>>
>> [Service]
>> ExecStartPre=/sbin/modprobe evdi
>> ExecStart=/usr/lib/displaylink/DisplayLinkManager
>> Restart=always
>> WorkingDirectory=/usr/lib/displaylink
>> RestartSec=5
>> --------------------------------------------
>>
>> /etc/udev/rules.d/99-displaylink.rules
>> ACTION=="add", SUBSYSTEM=="usb", ENV{ID_VENDOR}=="DisplayLink",
>> MODE="0660", RUN+="/bin/systemctl start displaylink.service"
>> ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_VENDOR}=="DisplayLink",
>> RUN+="/bin/systemctl stop displaylink.service"
>
> That's awfully generic...
>
> I'd really just be interested in vendor/product ids if the usb hub
> that is built into your docking station, where the display link is
> connected to.
>
> If in doubt, please run "lsusb" once before you plug in the device,
> and once after you plug it in, and let me know the difference: all the
> lines that appeared in the output by plugging it in.
unplu/plug, diff of $ lsusb
Bus 002 Device 005: ID 17e9:4323 DisplayLink
Bus 002 Device 004: ID 2109:8110 VIA Labs, Inc. Hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 008: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 007: ID 2109:2811 VIA Labs, Inc. Hub
>
> Thanks,
>
> Lennart
>
> --
> Lennart Poettering, Red Hat
--
google.com/+arnaudgabourygabx
More information about the systemd-devel
mailing list