[systemd-devel] systemd-networkd-wait-online.service take too much time

[Renato _]

hello, am working to get my Bionic image working perfectly on my BareMetal.

which is working perfectly fine on Xenial. But on Bionic I am facing to boot-latency issue with systemd. I googled it and I do not find interesting thing.

Can someone assist me to get a better troubleshoot?

Many Thanks!
-r

# cat /etc/issue
Ubuntu 18.04 LTS \n \l

# systemd-analyze blame
       2min 43ms systemd-networkd-wait-online.service
         30.970s apt-daily.service
          4.900s dev-mapper-sysvg\x2droot.device
          4.629s keyboard-setup.service
          1.760s systemd-journal-flush.service
          1.300s lvm2-monitor.service
          1.144s kdump-tools.service


# cat /etc/network/interfaces
auto enp130s0f0
iface enp130s0f0 inet manual
bond-master bond0

auto enp130s0f1
iface enp130s0f1 inet manual
bond-master bond0

auto bond0
iface bond0 inet static
# Sleep required for XXV710-DA2 (25G) CSI-5441
# N/A
gateway 10.88.112.1
address 10.88.112.44
netmask 255.255.254.0
bond_mode 802.3ad
bond_xmit_hash_policy layer3+4
bond_miimon 100
bond_lacp_rate fast
slaves enp130s0f0 enp130s0f1

dns-search myworld.net
dns-nameservers 8.8.8.8 8.8.4.4

# cat /etc/netplan/01-netcfg.yaml
# This file describes the network interfaces available on your system
# For more information, see netplan(5).
network:
  version: 2
  renderer: networkd
  ethernets:
    enp130s0f0:
      dhcp4: yes

# cat /etc/udev/rules.d/70-persistent-net.rules
# PCI device 0x8086:0x1521 (igb)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="34:17:eb:e7:0f:24", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eno1""

# PCI device 0x8086:0x1521 (igb)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="34:17:eb:e7:0f:25", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eno2""

# PCI device 0x8086:0x10fb (ixgbe)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:8c:fa:5b:24:7a", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="enp130s0f0""

# PCI device 0x8086:0x10fb (ixgbe)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:8c:fa:5b:24:7b", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="enp130s0f1""


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/systemd-devel/attachments/20180715/a186d452/attachment-0001.html>