[systemd-devel] systemd prerelease 247-rc2
systemd tag bot
donotreply-systemd-tag at refi64.com
Thu Nov 12 10:57:58 UTC 2020
A new systemd ☠️ pre-release ☠️ has just been tagged. Please download the tarball here:
https://github.com/systemd/systemd/archive/v247-rc2.tar.gz
NOTE: This is ☠️ pre-release ☠️ software. Do not run this on production
systems, but please test this and report any issues you find to GitHub:
https://github.com/systemd/systemd/issues/new?template=Bug_report.md
Changes since the previous release:
* KERNEL API INCOMPATIBILITY: Linux 4.12 introduced two new uevents
"bind" and "unbind" to the Linux device model. When this kernel
change was made, systemd-udevd was only minimally updated to handle
and propagate these new event types. The introduction of these new
uevents (which are typically generated for USB devices and devices
needing a firmware upload before being functional) resulted in a
number of issues which we so far didn't address. We hoped the kernel
maintainers would themselves address these issues in some form, but
that did not happen. To handle them properly, many (if not most) udev
rules files shipped in various packages need updating, and so do many
programs that monitor or enumerate devices with libudev or sd-device,
or otherwise process uevents. Please note that this incompatibility
is not fault of systemd or udev, but caused by an incompatible kernel
change that happened back in Linux 4.12, but is becoming more and
more visible as the new uevents are generated by more kernel drivers.
To minimize issues resulting from this kernel change (but not avoid
them entirely) starting with systemd-udevd 247 the udev "tags"
concept (which is a concept for marking and filtering devices during
enumeration and monitoring) has been reworked: udev tags are now
"sticky", meaning that once a tag is assigned to a device it will not
be removed from the device again until the device itself is removed
(i.e. unplugged). This makes sure that any application monitoring
devices that match a specific tag is guaranteed to both see uevents
where the device starts being relevant, and those where it stops
being relevant (the latter now regularly happening due to the new
"unbind" uevent type). The udev tags concept is hence now a concept
tied to a *device* instead of a device *event* — unlike for example
udev properties whose lifecycle (as before) is generally tied to a
device event, meaning that the previously determined properties are
forgotten whenever a new uevent is processed.
With the newly redefined udev tags concept, sometimes it's necessary
to determine which tags are the ones applied by the most recent
uevent/database update, in order to discern them from those
originating from earlier uevents/database updates of the same
device. To accommodate for this a new automatic property CURRENT_TAGS
has been added that works similar to the existing TAGS property but
only lists tags set by the most recent uevent/database
update. Similarly, the libudev/sd-device API has been updated with
new functions to enumerate these 'current' tags, in addition to the
existing APIs that now enumerate the 'sticky' ones.
To properly handle "bind"/"unbind" on Linux 4.12 and newer it is
essential that all udev rules files and applications are updated to
handle the new events. Specifically:
• All rule files that currently use a header guard similar to
ACTION!="add|change",GOTO="xyz_end" should be updated to use
ACTION=="remove",GOTO="xyz_end" instead, so that the
properties/tags they add are also applied whenever "bind" (or
"unbind") is seen. (This is most important for all physical device
types — those for which "bind" and "unbind" are currently
generated, for all other device types this change is still
recommended but not as important — but certainly prepares for
future kernel uevent type additions).
• Similarly, all code monitoring devices that contains an 'if' branch
discerning the "add" + "change" uevent actions from all other
uevents actions (i.e. considering devices only relevant after "add"
or "change", and irrelevant on all other events) should be reworked
to instead negatively check for "remove" only (i.e. considering
devices relevant after all event types, except for "remove", which
invalidates the device). Note that this also means that devices
should be considered relevant on "unbind", even though conceptually
this — in some form — invalidates the device. Since the precise
effect of "unbind" is not generically defined, devices should be
considered relevant even after "unbind", however I/O errors
accessing the device should then be handled gracefully.
• Any code that uses device tags for deciding whether a device is
relevant or not most likely needs to be updated to use the new
udev_device_has_current_tag() API (or sd_device_has_current_tag()
in case sd-device is used), to check whether the tag is set at the
moment an uevent is seen (as opposed to the existing
udev_device_has_tag() API which checks if the tag ever existed on
the device, following the API concept redefinition explained
above).
We are very sorry for this breakage and the requirement to update
packages using these interfaces. We'd again like to underline that
this is not caused by systemd/udev changes, but result of a kernel
behaviour change.
* The MountAPIVFS= service file setting now defaults to on if
RootImage= and RootDirectory= are used, which means that with those
two settings /proc/, /sys/ and /dev/ are automatically properly set
up for services. Previous behaviour may be restored by explicitly
setting MountAPIVFS=off.
* Since PAM 1.2.0 (2015) configuration snippets may be placed in
/usr/lib/pam.d/ in addition to /etc/pam.d/. If a file exists in the
latter it takes precedence over the former, similar to how most of
systemd's own configuration is handled. Given that PAM stack
definitions are primarily put together by OS vendors/distributions
(though possibly overridden by users), this systemd release moves its
own PAM stack configuration for the "systemd-user" PAM service (i.e.
for the PAM session invoked by the per-user user at .service instance)
from /etc/pam.d/ to /usr/lib/pam.d/. We recommend moving all
packages' vendor versions of their PAM stack definitions from
/etc/pam.d/ to /usr/lib/pam.d/, but if such OS-wide migration is not
desired the location to which systemd installs its PAM stack
configuration may be changed via the -Dpamconfdir Meson option.
* The runtime dependencies on libqrencode, libpcre2, libidn/libidn2,
libpwquality and libcryptsetup have been changed to be based on
dlopen(): instead of regular dynamic library dependencies declared in
the binary ELF headers, these libraries are now loaded on demand
only, if they are available. If the libraries cannot be found the
relevant operations will fail gracefully, or a suitable fallback
logic is chosen. This is supposed to be useful for general purpose
distributions, as it allows minimizing the list of dependencies the
systemd packages pull in, permitting building of more minimal OS
images, while still making use of these "weak" dependencies should
they be installed. Since many package managers automatically
synthesize package dependencies from ELF shared library dependencies,
some additional manual packaging work has to be done now to replace
those (slightly downgraded from "required" to "recommended" or
whatever is conceptually suitable for the package manager). Note that
this change does not alter build-time behaviour: as before the
build-time dependencies have to be installed during build, even if
they now are optional during runtime.
* sd-event.h gained a new call sd_event_add_time_relative() for
installing timers relative to the current time. This is mostly a
convenience wrapper around the pre-existing sd_event_add_time() call
which installs absolute timers.
* sd-event event sources may now be placed in a new "exit-on-failure"
mode, which may be controlled via the new
sd_event_source_get_exit_on_failure() and
sd_event_source_set_exit_on_failure() functions. If enabled, any
failure returned by the event source handler functions will result in
exiting the event loop (unlike the default behaviour of just
disabling the event source but continuing with the event loop). This
feature is useful to set for all event sources that define "primary"
program behaviour (where failure should be fatal) in contrast to
"auxiliary" behaviour (where failure should remain local).
* Most event source types sd-event supports now accept a NULL handler
function, in which case the event loop is exited once the event
source is to be dispatched, using the userdata pointer — converted to
a signed integer — as exit code of the event loop. Previously this
was supported for IO and signal event sources already. Exit event
sources still do not support this (simply because it makes little
sense there, as the event loop is already exiting when they are
dispatched).
* A new per-unit setting RootImageOptions= has been added which allows
tweaking the mount options for any file system mounted as effect of
the RootImage= setting.
* Another new per-unit setting MountImages= has been added, that allows
mounting additional disk images into the file system tree accessible
to the service.
* Timer units gained a new FixedRandomDelay= boolean setting. If
enabled, the random delay configured with RandomizedDelaySec= is
selected in a way that is stable on a given system (though still
different for different units).
* Socket units gained a new setting Timestamping= that takes "us", "ns"
or "off". This controls the SO_TIMESTAMP/SO_TIMESTAMPNS socket
options.
* systemd-repart now generates JSON output when requested with the new
--json= switch.
* systemd-machined's OpenMachineShell() bus call will now pass
additional policy metadata data fields to the PolicyKit
authentication request.
* systemd-tmpfiles gained a new -E switch, which is equivalent to
--exclude-prefix=/dev --exclude-prefix=/proc --exclude=/run
--exclude=/sys. It's particularly useful in combination with --root=,
when operating on OS trees that do not have any of these four runtime
directories mounted, as this means no files below these subtrees are
created or modified, since those mount points should probably remain
empty.
* systemd-tmpfiles gained a new --image= switch which is like --root=,
but takes a disk image instead of a directory as argument. The
specified disk image is mounted inside a temporary mount namespace
and the tmpfiles.d/ drop-ins stored in the image are executed and
applied to the image. systemd-sysusers similarly gained a new
--image= switch, that allows the sysusers.d/ drop-ins stored in the
image to be applied onto the image.
* Similarly, the journalctl command also gained an --image= switch,
which is a quick one-step solution to look at the log data included
in OS disk images.
* journalctl's --output=cat option (which outputs the log content
without any metadata, just the pure text messages) will now make use
of terminal colors when run on a suitable terminal, similarly to the
other output modes.
* JSON group records now support a "description" string that may be
used to add a human-readable textual description to such groups. This
is supposed to match the user's GECOS field which traditionally
didn't have a counterpart for group records.
* The "systemd-dissect" tool that may be used to inspect OS disk images
and that was previously installed to /usr/lib/systemd/ has now been
moved to /usr/bin/, reflecting its updated status of an officially
supported tool with a stable interface. It gained support for a new
--mkdir switch which when combined with --mount has the effect of
creating the directory to mount the image to if it is missing
first. It also gained two new commands --copy-from and --copy-to for
copying files and directories in and out of an OS image without the
need to manually mount it. It also acquired support for a new option
--json= to generate JSON output when inspecting an OS image.
* The cgroup2 file system is now mounted with the
"memory_recursiveprot" mount option, supported since kernel 5.7. This
means that the MemoryLow= and MemoryMin= unit file settings now apply
recursively to whole subtrees.
* systemd-homed now defaults to using the btrfs file system — if
available — when creating home directories in LUKS volumes. This may
be changed with the DefaultFileSystemType= setting in homed.conf.
It's now the default file system in various major distributions and
has the major benefit for homed that it can be grown and shrunk while
mounted, unlike the other contenders ext4 and xfs, which can both be
grown online, but not shrunk (in fact xfs is the technically most
limited option here, as it cannot be shrunk at all).
* JSON user records managed by systemd-homed gained support for
"recovery keys". These are basically secondary passphrases that can
unlock user accounts/home directories. They are computer-generated
rather than user-chosen, and typically have greater entropy.
homectl's --recovery-key= option may be used to add a recovery key to
a user account. The generated recovery key is displayed as a QR code,
so that it can be scanned to be kept in a safe place. This feature is
particularly useful in combination with systemd-homed's support for
FIDO2 or PKCS#11 authentication, as a secure fallback in case the
security tokens are lost. Recovery keys may be entered wherever the
system asks for a password.
* systemd-homed now maintains a "dirty" flag for each LUKS encrypted
home directory which indicates that a home directory has not been
deactivated cleanly when offline. This flag is useful to identify
home directories for which the offline discard logic did not run when
offlining, and where it would be a good idea to log in again to catch
up.
* systemctl gained a new parameter --timestamp= which may be used to
change the style in which timestamps are output, i.e. whether to show
them in local timezone or UTC, or whether to show µs granularity.
* Alibaba's "pouch" container manager is now detected by
systemd-detect-virt, ConditionVirtualization= and similar
constructs. Similar, they now also recognize IBM PowerVM machine
virtualization.
* systemd-nspawn has been reworked to use the /run/host/incoming/ as
place to use for propagating external mounts into the
container. Similarly /run/host/notify is now used as the socket path
for container payloads to communicate with the container manager
using sd_notify(). The container manager now uses the
/run/host/inaccessible/ directory to place "inaccessible" file nodes
of all relevant types which may be used by the container payload as
bind mount source to over-mount inodes to make them inaccessible.
/run/host/container-manager will now be initialized with the same
string as the $container environment variable passed to the
container's PID 1. /run/host/container-uuid will be initialized with
the same string as $container_uuid. This means the /run/host/
hierarchy is now the primary way to make host resources available to
the container. The Container Interface documents these new files and
directories:
https://systemd.io/CONTAINER_INTERFACE
* Support for the "ConditionNull=" unit file condition has been
deprecated and undocumented for 6 years. systemd started to warn
about its use 1.5 years ago. It has now been removed entirely.
* sd-bus.h gained a new API call sd_bus_error_has_names(), which takes
a sd_bus_error struct and a list of error names, and checks if the
error matches one of these names. It's a convenience wrapper that is
useful in cases where multiple errors shall be handled the same way.
* A new system call filter list "@known" has been added, that contains
all system calls known at the time systemd was built.
* Behaviour of system call filter allow lists has changed slightly:
system calls that are contained in @known will result in a EPERM by
default, while those not contained in it result in ENOSYS. This
should improve compatibility because known system calls will thus be
communicated as prohibited, while unknown (and thus newer ones) will
be communicated as not implemented, which hopefully has the greatest
chance of triggering the right fallback code paths in client
applications.
* "systemd-analyze syscall-filter" will now show two separate sections
at the bottom of the output: system calls known during systemd build
time but not included in any of the filter groups shown above, and
system calls defined on the local kernel but known during systemd
build time.
* If the $SYSTEMD_LOG_SECCOMP=1 environment variable is set for
systemd-nspawn all system call filter violations will be logged by
the kernel (audit). This is useful for tracking down system calls
invoked by container payloads that are prohibited by the container's
system call filter policy.
* If the $SYSTEMD_SECCOMP=0 environment variable is set for
systemd-nspawn (and other programs that use seccomp) all seccomp
filtering is turned off.
* Two new unit file settings ProtectProc= and ProcSubset= have been
added that expose the hidepid= and subset= mount options of procfs.
All processes of the unit will only see processes in /proc that are
are owned by the unit's user. This is an important new sandboxing
option that is recommended to be set on all system services. All
long-running system services that are included in systemd itself set
this option now. This option is only supported on kernel 5.8 and
above, since the hidepid= option supported on older kernels was not a
per-mount option but actually applied to the whole PID namespace.
* Socket units gained a new boolean setting FlushPending=. If enabled
all pending socket data/connections are flushed whenever the socket
unit enters the "listening" state, i.e. after the associated service
exited.
* The unit file setting NUMAMask= gained a new "all" value: when used,
all existing NUMA nodes are added to the NUMA mask.
* A new "credentials" logic has been added to system services. This is
a simple mechanism to pass privileged data to services in a safe and
secure way. It's supposed to be used to pass per-service secret data
such as passwords or cryptographic keys but also associated less
private information such as user names, certificates, and similar to
system services. Each credential is identified by a short user-chosen
name and may contain arbitrary binary data. Two new unit file
settings have been added: SetCredential= and LoadCredential=. The
former allows setting a credential to a literal string, the latter
sets a credential to the contents of a file (or data read from a
user-chosen AF_UNIX stream socket). Credentials are passed to the
service via a special credentials directory, one file for each
credential. The path to the credentials directory is passed in a new
$CREDENTIALS_DIRECTORY environment variable. Since the credentials
are passed in the file system they may be easily referenced in
ExecStart= command lines too, thus no explicit support for the
credentials logic in daemons is required (though ideally daemons
would look for the bits they need in $CREDENTIALS_DIRECTORY
themselves automatically, if set). The $CREDENTIALS_DIRECTORY is
backed by unswappable memory if privileges allow it, immutable if
privileges allow it, is accessible only to the service's UID, and is
automatically destroyed when the service stops.
* systemd-nspawn supports the same credentials logic. It can both
consume credentials passed to it via the aforementioned
$CREDENTIALS_DIRECTORY protocol as well as pass these credentials on
to its payload. The service manager/PID 1 has been updated to match
this: it can also accept credentials from the container manager that
invokes it (in fact: any process that invokes it), and passes them on
to its services. Thus, credentials can be propagated recursively down
the tree: from a system's service manager to a systemd-nspawn
service, to the service manager that runs as container payload and to
the service it runs below. Credentials may also be added on the
systemd-nspawn command line, using new --set-credential= and
--load-credential= command line switches that match the
aforementioned service settings.
* systemd-repart gained new settings Format=, Encrypt=, CopyFiles= in
the partition drop-ins which may be used to format/LUKS
encrypt/populate any created partitions. The partitions are
encrypted/formatted/populated before they are registered in the
partition table, so that they appear atomically: either the
partitions do not exist yet or they exist fully encrypted, formatted,
and populated — there is no time window where they are
"half-initialized". Thus the system is robust to abrupt shutdown: if
the tool is terminated half-way during its operations on next boot it
will start from the beginning.
* systemd-repart's --size= operation gained a new "auto" value. If
specified, and operating on a loopback file it is automatically sized
to the minimal size the size constraints permit. This is useful to
use "systemd-repart" as an image builder for minimally sized images.
* systemd-resolved now gained a third IPC interface for requesting name
resolution: besides D-Bus and local DNS to 127.0.0.53 a Varlink
interface is now supported. The nss-resolve NSS module has been
modified to use this new interface instead of D-Bus. Using Varlink
has a major benefit over D-Bus: it works without a broker service,
and thus already during earliest boot, before the dbus daemon has
been started. This means name resolution via systemd-resolved now
works at the same time systemd-networkd operates: from earliest boot
on, including in the initrd.
* systemd-resolved gained support for a new DNSStubListenerExtra=
configuration file setting which may be used to specify additional IP
addresses the built-in DNS stub shall listen on, in addition to the
main one on 127.0.0.53:53.
* Name lookups issued via systemd-resolved's D-Bus and Varlink
interfaces (and thus also via glibc NSS if nss-resolve is used) will
now honour a trailing dot in the hostname: if specified the search
path logic is turned off. Thus "resolvectl query foo." is now
equivalent to "resolvectl query --search=off foo.".
* systemd-resolved gained a new D-Bus property "ResolvConfMode" that
exposes how /etc/resolv.conf is currently managed: by resolved (and
in which mode if so) or another subsystem. "resolvctl" will display
this property in its status output.
* The resolv.conf snippets systemd-resolved provides will now set "."
as the search domain if no other search domain is known. This turns
off the derivation of an implicit search domain by nss-dns for the
hostname, when the hostname is set to an FQDN. This change is done to
make nss-dns using resolv.conf provided by systemd-resolved behave
more similarly to nss-resolve.
* systemd-tmpfiles' file "aging" logic (i.e. the automatic clean-up of
/tmp/ and /var/tmp/ based on file timestamps) now looks at the
"birth" time (btime) of a file in addition to the atime, mtime, and
ctime.
* systemd-analyze gained a new verb "capability" that lists all known
capabilities by the systemd build and by the kernel.
* If a file /usr/lib/clock-epoch exists, PID 1 will read its mtime and
advance the system clock to it at boot if it is noticed to be before
that time. Previously, PID 1 would only advance the time to an epoch
time that is set during build-time. With this new file OS builders
can change this epoch timestamp on individual OS images without
having to rebuild systemd.
* systemd-logind will now listen to the KEY_RESTART key from the Linux
input layer and reboot the system if it is pressed, similarly to how
it already handles KEY_POWER, KEY_SUSPEND or KEY_SLEEP. KEY_RESTART
was originally defined in the Multimedia context (to restart playback
of a song or film), but is now primarily used in various embedded
devices for "Reboot" buttons. Accordingly, systemd-logind will now
honour it as such. This may configured in more detail via the new
HandleRebootKey= and RebootKeyIgnoreInhibited=.
* systemd-nspawn/systemd-machined will now reconstruct hardlinks when
copying OS trees, for example in "systemd-nspawn --ephemeral",
"systemd-nspawn --template=", "machinectl clone" and similar. This is
useful when operating with OSTree images, which use hardlinks heavily
throughout, and where such copies previously resulting in "exploding"
hardlinks.
* systemd-nspawn's --console= setting gained support for a new
"autopipe" value, which is identical to "interactive" when invoked on
a TTY, and "pipe" otherwise.
* systemd-networkd's .network files gained support for explicitly
configuring the multicast membership entries of bridge devices in the
[BridgeMDB] section. It also gained support for the PIE queuing
discipline in the [FlowQueuePIE] sections.
* systemd-networkd's .netdev files may now be used to create "BareUDP"
tunnels, configured in the new [BareUDP] setting. VXLAN tunnels may
now be marked to be independent of any underlying network interface
via the new Independent= boolean setting.
* systemd-networkd's Gateway= setting in .network files now accepts the
special values _dhcp4 and _ipv6ra to configure additional, locally
defined, explicit routes to the gateway acquired via DHCP or IPv6
Router Advertisements.
* systemd-networkd's [IPv6PrefixDelegation] section and
IPv6PrefixDelegation= options have been renamed as [IPv6SendRA] and
IPv6SendRA= (the old names are still accepted for backwards
compatibility).
* systemctl gained support for two new verbs: "service-log-level" and
"service-log-target" may be used on services that implement the
generic org.freedesktop.LogControl1 D-Bus interface to dynamically
adjust the log level and target. All of systemd's long-running
services support this now, but ideally all system services would
implement this interface to make the system more uniformly
debuggable.
* The SystemCallErrorNumber= unit file setting now accepts the new
"kill" and "log" actions, in addition to arbitrary error number
specifications as before. If "kill" the the processes are killed on
the event, if "log" the offending system call is audit logged.
* A new SystemCallLog= unit file setting has been added that accepts a
list of system calls that shall be logged about (audit).
* The OS image dissection logic (as used by RootImage= in unit files or
systemd-nspawn's --image= switch) has gained support for identifying
and mounting explicit /usr/ partitions, which are now defined in the
discoverable partition specification. This should be useful for
environments where the root file system is
generated/formatted/populated dynamically on first boot and combined
with an immutable /usr/ tree that is supplied by the vendor.
* In the final phase of shutdown, within the systemd-shutdown binary
we'll now try to detach MD devices (i.e software RAID) in addition to
loopback block devices and DM devices as before. This is supposed to
be a safety net only, in order to increase robustness if things go
wrong. Storage subsystems are expected to properly detach their
storage volumes during regular shutdown already (or in case of
storage backing the root file system: in the initrd hook we return to
later).
* If the SYSTEMD_LOG_TID environment variable is set all systemd tools
will now log the thread ID in their log output. This is useful when
working with heavily threaded programs.
* If the SYSTEMD_RDRAND environment variable is set to "0", systemd will
not use the RDRAND CPU instruction. This is useful in environments
such as replay debuggers where non-deterministic behaviour is not
desirable.
* The autopaging logic in systemd's various tools (such as systemctl)
has been updated to turn on "secure" mode in "less"
(i.e. $LESSECURE=1) if execution in a "sudo" environment is
detected. This disables invoking external programs from the pager,
via the pipe logic. This behaviour may be overridden via the new
$SYSTEMD_PAGERSECURE environment variable.
* Units which have resource limits (.service, .mount, .swap, .slice,
.socket, and .slice) gained new configuration settings
ManagedOOMSwap=, ManagedOOMMemoryPressure=, and
ManagedOOMMemoryPressureLimitPercent= that specify resource pressure
limits and optional action taken by systemd-oomd.
* A new service systemd-oomd has been added. It monitors resource
contention for selected parts of the unit hierarchy using the PSI
information reported by the kernel, and kills processes when memory
or swap pressure is above configured limits. This service is only
enabled in developer mode (see below) and should be considered a
preview in this release. Behaviour details and option names are
subject to change without the usual backwards-compatibility promises.
* A new helper oomctl has been added to introspect systemd-oomd state.
If also is only available in developer mode and should be considered
a preview without the usual backwards-compatibility promises.
* New meson option -Dcompat-mutable-uid-boundaries= has been added. If
enabled, systemd reads the system UID boundaries from /etc/login.defs
at runtime, instead of using the built-in values selected during
build. This is an option to improve compatibility for upgrades from
old systems. It's strongly recommended not to make use of this
functionality on new systems (or even enable it during build), as it
makes something runtime-configurable that is mostly an implementation
detail of the OS, and permits avoidable differences in deployments
that create all kinds of problems in the long run.
* New meson option '-Dmode=developer|release' has been added. When
'developer', additional checks and features are enabled that are
relevant during upstream development, e.g. verification that
semi-automatically-generated documentation has been properly updated
following API changes. Those checks are considered hints for
developers and are not actionable in downstream builds. In addition,
extra features that are not ready for general consumption may be
enabled in developer mode. It is thus recommended to set
'-Dmode=release' in end-user and distro builds.
* systemd-cryptsetup gained support for processing detached LUKS
headers specified on the kernel command line via the header=
parameter of the luks.options= kernel command line option. The same
device/path syntax as for key files is supported for header files
like this.
* The "net_id" built-in of udev has been updated to ignore ACPI _SUN
slot index data for devices that are connected through a PCI bridge
where the _SUN index is associated with the bridge instead of the
network device itself. Previously this would create ambiguous device
naming if multiple network interfaces were connected to the same PCI
bridge. Since this is a naming scheme incompatibility on systems that
possess hardware like this it has been introduced as new naming
scheme "v247". The previous scheme can be selected via the
"net.naming-scheme=v245" kernel command line parameter.
* ConditionFirstBoot= semantics have been modified to be safe towards
abnormal system power-off during first boot. Specifically, the
"systemd-machine-id-commit.service" service now acts as boot
milestone indicating when the first boot process is sufficiently
complete in order to not consider the next following boot also a
first boot. If the system is reset before this unit is reached the
first time, the next boot will still be considered a first boot; once
it has been reached, no further boots will be considered a first
boot. The "first-boot-complete.target" unit now acts as official hook
point to order against this. If a service shall be run on every boot
until the first boot fully succeeds it may thus be ordered before
this target unit (and pull it in) and carry ConditionFirstBoot=
appropriately.
* bootctl's set-default and set-oneshot commands now accept the three
special strings "@default", "@oneshot", "@current" in place of a boot
entry id. These strings are resolved to the current default and
oneshot boot loader entry, as well as the currently booted one. Thus
a command "bootctl set-default @current" may be used to make the
currently boot menu item the new default for all subsequent boots.
* "systemctl edit" has been updated to show the original effective unit
contents in commented form in the text editor.
Contributions from: Adolfo Jayme Barrientos, afg, Alec Moskvin, Alyssa
Ross, Amitanand Chikorde, Andrew Hangsleben, Anita Zhang, Ansgar
Burchardt, Arian van Putten, Aurelien Jarno, Axel Rasmussen, bauen1,
Beniamino Galvani, Benjamin Berg, Bjørn Mork, brainrom, Chandradeep
Dey, Charles Lee, Chris Down, Christian Göttsche, Clemens Gruber, Daan
De Meyer, Daniele Medri, Daniel Mack, Daniel Rusek, Dan Streetman,
David Tardon, Dimitri John Ledkov, Dmitry Borodaenko, Elias Probst,
Elisei Roca, ErrantSpore, Etienne Doms, Fabrice Fontaine, fangxiuning,
Felix Riemann, Florian Klink, Franck Bui, Frantisek Sumsal, fwSmit,
George Rawlinson, germanztz, Gibeom Gwon, Glen Whitney, Gogo Gogsi,
Göran Uddeborg, Grant Mathews, Hans de Goede, Hans Ulrich Niedermann,
Haochen Tong, Harald Seiler, huangyong, Hubert Kario, Ikey Doherty, Jan
Chren, Jan Schlüter, Jérémy Nouhaud, Jian-Hong Pan, Joerg Behrmann,
Jonathan Lebon, Josh Brobst, Juergen Hoetzel, Julien Humbert, Kai-Chuan
Hsieh, Kairui Song, Kamil Dudka, Kir Kolyshkin, Kristijan Gjoshev, Kyle
Huey, Kyle Russell, Lennart Poettering, lichangze, Luca Boccassi, Lucas
Werkmeister, Luca Weiss, Marc Kleine-Budde, Marco Wang, Martin Wilck,
Marti Raudsepp, masmullin2000, Máté Pozsgay, Matt Fenwick, Michael
Biebl, Michael Scherer, Michal Koutný, Michal Sekletár, Michal
Suchanek, Mikael Szreder, Milo Casagrande, mirabilos, Mitsuha_QuQ,
mog422, Muhammet Kara, Nazar Vinnichuk, Nicholas Narsing, Nicolas
Fella, Njibhu, nl6720, Oğuz Ersen, Olivier Le Moal, Ondrej Kozina,
onlybugreports, Pass Automated Testing Suite, Pat Coulthard, Pedro
Ruiz, Peter Hutterer, Phaedrus Leeds, PhoenixDiscord, Piotr Drąg, Plan
C, Purushottam choudhary, Rasmus Villemoes, Renaud Métrich, Robert
Marko, Ronan Pigott, Roy Chen (陳彥廷), RussianNeuroMancer, Samanta
Navarro, Samuel BF, scootergrisen, Sorin Ionescu, Steve Dodd, Susant
Sahani, Timo Rothenpieler, Tobias Hunger, Tobias Kaufmann, Topi
Miettinen, Vito Caputo, Weblate, Wen Yang, williamvds, Yu, Li-Yu, Yuri
Chornoivan, Yu Watanabe, Zbigniew Jędrzejewski-Szmek, Zmicer Turok,
Дамјан Георгиевски
– Warsaw, 2020-11-10
More information about the systemd-devel
mailing list