[Tango-artists] Request for more ArtLibre/Scribus Icons

[Craig Bradney]

Hi Andeas,

Great thanks, I will put them in CVS tonight. Thanks of course to Lapo. 

Any ideas about the last two?

thanks
Craig

On Tuesday 16 January 2007 16:31, Andreas Nilsson wrote:
> Hi Craig!
> Here are the ones Lapo did some time ago, named properly and stuff.
> http://andreasn.se/diverse/temp/scribus-align-distribute.tar.gz
>
> Preview: http://andreasn.se/diverse/temp/scribus-align.png
> - Andreas
>
> Craig Bradney wrote:
> > Hi,
> >
> > I was chatting to Andreas and Jimmac in #scribus and was asked to post
> > requests directly to the mailing list.
> >
> > Where we are less tango-ified (?) in 1.3.4cvs:
> > -The align & distribute window, we are using old Inkscape icons plus a
> > couple I hacked up for functions Inkscape doesn't have. The 2 in the
> > ArtLibre area look ok to me, if it was a complete set we could use them.
> > We have (from the tooltips):
> > Align right sides of items to left side of anchor
> > Align left sides of items to right side of anchor
> > Align bottoms
> > Align right sides
> > Align tops of items to bottom of anchor
> > Center on vertical axis
> > Align left sides
> > Center on horizontal axis
> > Align bottoms of items to top of anchor
> > Align tops
> >
> > Make horizontal gaps between items equal
> > Make horizontal gaps between items equal to the value specified
> > Distribute right sides equidistantly
> > Distribute bottoms equidistantly
> > Distribute centers equidistantly horizontally
> > Make vertical gaps between items equal
> > Make vertical gaps between items equal to the value specified
> > Distribute left sides equidistantly
> > Distribute centers equidistantly vertically
> > Distribute tops equidistantly
> > Make horizontal gaps between items and sides of page equal
> > Make vertical gaps between items and the top and bottom of page equal
> > Make horizontal gaps between items and sides of page margins equal
> > Make vertical gaps between items and the top and bottom of page margins
> > equal Distribute the items with the distance specified
> >
> > Any naming spec you see fit is ok, along the lines of whats already on
> > artlibre and the above.
> >
> >
> > Secondly, our node palette has icons from the dark ages of Scribus:
> > Move Nodes
> > Move Control Points
> > Add Nodes
> > Delete Nodes
> > Move Control Points Independently
> > Move Control Points Symmetrical
> > Reset Control Points
> > Reset this Control Point
> > Open a Polygon or Cuts a Bezier Curve
> > Close this Bezier Curve
> > Mirror the Path Horizontally
> > Mirror the Path Vertically
> > Shear the Path Horizontally to the Right
> > Shear the Path Horizontally to the Left
> > Shear the Path Vertically Up
> > Shear the Path Vertically Down
> > Rotate the Path Counter-Clockwise
> > Rotate the Path Clockwise
> > Shrink the Size of the Path by shown %
> > Enlarge the Size of the Path by shown %
> > Reduce the Size of the Path by the shown value
> > Enlarge the Size of the Path by the shown value
> >
> > I think this, rather large set, would pretty much complete the conversion
> > to a tango style. I suppose we might find one or two more here and there
> > but its not that obvious now.
> >
> > This is not a request for a rush to get these done, but so you know, we
> > are moving very quickly towards a 1.3.4RC in the coming weeks and then a
> > 1.3.4 a little later. Any icon submission would not need to be there for
> > the RC. If you can help us out, that would be appreciated a lot. I know
> > there are a lot there, they do not all have to be done for 1.3.4.
> >
> > Regards
> > Craig
> > Scribus Team
> >
> > PS I am now subscribed to the list
> > _______________________________________________
> > Tango-artists mailing list
> > Tango-artists at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/tango-artists
>
> _______________________________________________
> Tango-artists mailing list
> Tango-artists at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/tango-artists