[uim-commit] r695 - in trunk: . fep uim xim
ekato at freedesktop.org
ekato at freedesktop.org
Mon Feb 21 18:26:13 PST 2005
Author: ekato
Date: 2005-02-21 18:26:10 -0800 (Mon, 21 Feb 2005)
New Revision: 695
Modified:
trunk/config.guess
trunk/config.sub
trunk/fep/Makefile.am
trunk/ltmain.sh
trunk/uim/Makefile.am
trunk/xim/Makefile.am
Log:
* config.guess : Sync with libtool-1.5.14.
* config.sub : Ditto.
* ltmain.sh : Ditto.
* uim/Makefile.am : Use LTLIBINTL and LTLIBICONV instead of
LIBINTL and LIBICONV for libuim_la_LIBADD. Remove redundant
LIBICONV from uim_sh_LDADD and uim_agent_LDADD since they are
contained in libuim.la.
* fep/Makefile.am : Remove redundant LIBICONV from uim_fep_LDADD.
* xim/Makefile.am : Remove redundant LIBICONV from uim_xim_LDADD.
Modified: trunk/config.guess
===================================================================
--- trunk/config.guess 2005-02-21 22:45:09 UTC (rev 694)
+++ trunk/config.guess 2005-02-22 02:26:10 UTC (rev 695)
@@ -1,9 +1,9 @@
#! /bin/sh
# Attempt to guess a canonical system name.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2003-07-02'
+timestamp='2005-02-10'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -53,7 +53,7 @@
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
@@ -197,15 +197,21 @@
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
echo "${machine}-${os}${release}"
exit 0 ;;
+ amd64:OpenBSD:*:*)
+ echo x86_64-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
amiga:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
- arc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ cats:OpenBSD:*:*)
+ echo arm-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
hp300:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
+ luna88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
mac68k:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
@@ -221,25 +227,33 @@
mvmeppc:OpenBSD:*:*)
echo powerpc-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
- pmax:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
sgi:OpenBSD:*:*)
- echo mipseb-unknown-openbsd${UNAME_RELEASE}
+ echo mips64-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
sun3:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
- wgrisc:OpenBSD:*:*)
- echo mipsel-unknown-openbsd${UNAME_RELEASE}
- exit 0 ;;
*:OpenBSD:*:*)
echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit 0 ;;
+ macppc:MirBSD:*:*)
+ echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit 0 ;;
alpha:OSF1:*:*)
- if test $UNAME_RELEASE = "V4.0"; then
+ case $UNAME_RELEASE in
+ *4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
- fi
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
# According to Compaq, /usr/sbin/psrinfo has been available on
# OSF/1 and Tru64 systems produced since 1995. I hope that
# covers most systems running today. This code pipes the CPU
@@ -277,15 +291,13 @@
"EV7.9 (21364A)")
UNAME_MACHINE="alphaev79" ;;
esac
+ # A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
exit 0 ;;
- Alpha*:OpenVMS:*:*)
- echo alpha-hp-vms
- exit 0 ;;
Alpha\ *:Windows_NT*:*)
# How do we know it's Interix rather than the generic POSIX subsystem?
# Should we change UNAME_MACHINE based on the output of uname instead
@@ -307,6 +319,12 @@
*:OS/390:*:*)
echo i370-ibm-openedition
exit 0 ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit 0 ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit 0 ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
echo arm-acorn-riscix${UNAME_RELEASE}
exit 0;;
@@ -327,7 +345,7 @@
DRS?6000:unix:4.0:6*)
echo sparc-icl-nx6
exit 0 ;;
- DRS?6000:UNIX_SV:4.2*:7*)
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
sparc) echo sparc-icl-nx7 && exit 0 ;;
esac ;;
@@ -399,6 +417,9 @@
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
exit 0 ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
powerpc:machten:*:*)
echo powerpc-apple-machten${UNAME_RELEASE}
exit 0 ;;
@@ -734,7 +755,7 @@
echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
*:UNICOS/mp:*:*)
- echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
exit 0 ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
@@ -742,6 +763,11 @@
FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit 0 ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
exit 0 ;;
@@ -751,22 +777,8 @@
*:BSD/OS:*:*)
echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
exit 0 ;;
- *:FreeBSD:*:*|*:GNU/FreeBSD:*:*)
- # Determine whether the default compiler uses glibc.
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
- #include <features.h>
- #if __GLIBC__ >= 2
- LIBC=gnu
- #else
- LIBC=
- #endif
-EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
- # GNU/FreeBSD systems have a "k" prefix to indicate we are using
- # FreeBSD's kernel, but not the complete OS.
- case ${LIBC} in gnu) kernel_only='k' ;; esac
- echo ${UNAME_MACHINE}-unknown-${kernel_only}freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC}
+ *:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
exit 0 ;;
i*:CYGWIN*:*)
echo ${UNAME_MACHINE}-pc-cygwin
@@ -792,6 +804,9 @@
i*:UWIN*:*)
echo ${UNAME_MACHINE}-pc-uwin
exit 0 ;;
+ amd64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit 0 ;;
p*:CYGWIN*:*)
echo powerpcle-unknown-cygwin
exit 0 ;;
@@ -799,8 +814,13 @@
echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
exit 0 ;;
*:GNU:*:*)
+ # the GNU system
echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
exit 0 ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit 0 ;;
i*86:Minix:*:*)
echo ${UNAME_MACHINE}-pc-minix
exit 0 ;;
@@ -810,9 +830,18 @@
cris:Linux:*:*)
echo cris-axis-linux-gnu
exit 0 ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit 0 ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit 0 ;;
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit 0 ;;
m68*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-gnu
exit 0 ;;
@@ -948,6 +977,9 @@
LIBC=gnuaout
#endif
#endif
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
EOF
eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0
@@ -978,6 +1010,9 @@
i*86:atheos:*:*)
echo ${UNAME_MACHINE}-unknown-atheos
exit 0 ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit 0 ;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
echo i386-unknown-lynxos${UNAME_RELEASE}
exit 0 ;;
@@ -1047,9 +1082,9 @@
M680?0:D-NIX:5.3:*)
echo m68k-diab-dnix
exit 0 ;;
- M68*:*:R3V[567]*:*)
+ M68*:*:R3V[5678]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0)
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
@@ -1147,9 +1182,10 @@
echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
exit 0 ;;
*:Darwin:*:*)
- case `uname -p` in
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
*86) UNAME_PROCESSOR=i686 ;;
- powerpc) UNAME_PROCESSOR=powerpc ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
esac
echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
exit 0 ;;
@@ -1164,7 +1200,10 @@
*:QNX:*:4*)
echo i386-pc-qnx
exit 0 ;;
- NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*)
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit 0 ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
echo nsr-tandem-nsk${UNAME_RELEASE}
exit 0 ;;
*:NonStop-UX:*:*)
@@ -1208,6 +1247,19 @@
SEI:*:*:SEIUX)
echo mips-sei-seiux${UNAME_RELEASE}
exit 0 ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms && exit 0 ;;
+ I*) echo ia64-dec-vms && exit 0 ;;
+ V*) echo vax-dec-vms && exit 0 ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit 0 ;;
esac
#echo '(No uname command or uname output not recognized.)' 1>&2
Modified: trunk/config.sub
===================================================================
--- trunk/config.sub 2005-02-21 22:45:09 UTC (rev 694)
+++ trunk/config.sub 2005-02-22 02:26:10 UTC (rev 695)
@@ -1,9 +1,9 @@
#! /bin/sh
# Configuration validation subroutine script.
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-# 2000, 2001, 2002, 2003 Free Software Foundation, Inc.
+# 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-timestamp='2003-07-17'
+timestamp='2005-02-10'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
@@ -70,7 +70,7 @@
version="\
GNU config.sub ($timestamp)
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
@@ -118,7 +118,8 @@
# Here we must recognize all the valid KERNEL-OS combinations.
maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
- nto-qnx* | linux-gnu* | kfreebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+ kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
@@ -144,7 +145,7 @@
-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
- -apple | -axis)
+ -apple | -axis | -knuth | -cray)
os=
basic_machine=$1
;;
@@ -236,7 +237,7 @@
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
| ip2k | iq2000 \
- | m32r | m68000 | m68k | m88k | mcore \
+ | m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
| mips | mipsbe | mipseb | mipsel | mipsle \
| mips16 \
| mips64 | mips64el \
@@ -248,6 +249,7 @@
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
| mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipstx39 | mipstx39el \
@@ -260,12 +262,12 @@
| pyramid \
| sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
- | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
+ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv8 | sparcv9 | sparcv9b \
| strongarm \
| tahoe | thumb | tic4x | tic80 | tron \
| v850 | v850e \
| we32k \
- | x86 | xscale | xstormy16 | xtensa \
+ | x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
| z8k)
basic_machine=$basic_machine-unknown
;;
@@ -298,7 +300,7 @@
| avr-* \
| bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
- | clipper-* | cydra-* \
+ | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
| elxsi-* \
| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
@@ -306,9 +308,9 @@
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
| ip2k-* | iq2000-* \
- | m32r-* \
+ | m32r-* | m32rle-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
- | m88110-* | m88k-* | mcore-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* \
| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
| mips16-* \
| mips64-* | mips64el-* \
@@ -320,11 +322,13 @@
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
| mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipstx39-* | mipstx39el-* \
+ | mmix-* \
| msp430-* \
- | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
@@ -333,14 +337,14 @@
| sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
- | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
| tahoe-* | thumb-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tron-* \
| v850-* | v850e-* | vax-* \
| we32k-* \
- | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \
- | xtensa-* \
+ | x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa-* \
| ymp-* \
| z8k-*)
;;
@@ -360,6 +364,9 @@
basic_machine=a29k-amd
os=-udi
;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
adobe68k)
basic_machine=m68010-adobe
os=-scout
@@ -377,6 +384,9 @@
amd64)
basic_machine=x86_64-pc
;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
amdahl)
basic_machine=580-amdahl
os=-sysv
@@ -436,12 +446,27 @@
basic_machine=j90-cray
os=-unicos
;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16c)
+ basic_machine=cr16c-unknown
+ os=-elf
+ ;;
crds | unos)
basic_machine=m68k-crds
;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
cris | cris-* | etrax*)
basic_machine=cris-axis
;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
da30 | da30-*)
basic_machine=m68k-da30
;;
@@ -464,6 +489,10 @@
basic_machine=m88k-motorola
os=-sysv3
;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
dpx20 | dpx20-*)
basic_machine=rs6000-bull
os=-bosx
@@ -642,10 +671,6 @@
mips3*)
basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
;;
- mmix*)
- basic_machine=mmix-knuth
- os=-mmixware
- ;;
monitor)
basic_machine=m68k-rom68k
os=-coff
@@ -726,10 +751,6 @@
np1)
basic_machine=np1-gould
;;
- nv1)
- basic_machine=nv1-cray
- os=-unicosmp
- ;;
nsr-tandem)
basic_machine=nsr-tandem
;;
@@ -741,6 +762,10 @@
basic_machine=or32-unknown
os=-coff
;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
OSE68000 | ose68000)
basic_machine=m68000-ericsson
os=-ose
@@ -961,6 +986,10 @@
tower | tower-32)
basic_machine=m68k-ncr
;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
udi29k)
basic_machine=a29k-amd
os=-udi
@@ -1004,6 +1033,10 @@
basic_machine=hppa1.1-winbond
os=-proelf
;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
xps | xps100)
basic_machine=xps100-honeywell
;;
@@ -1034,6 +1067,9 @@
romp)
basic_machine=romp-ibm
;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
rs6000)
basic_machine=rs6000-ibm
;;
@@ -1056,7 +1092,7 @@
sh64)
basic_machine=sh64-unknown
;;
- sparc | sparcv9 | sparcv9b)
+ sparc | sparcv8 | sparcv9 | sparcv9b)
basic_machine=sparc-sun
;;
cydra)
@@ -1129,19 +1165,20 @@
| -aos* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -netbsd* | -openbsd* | -kfreebsd* | -freebsd* | -riscix* \
- | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
| -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
| -chorusos* | -chorusrdb* \
| -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
| -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
| -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
- | -powermax* | -dnix* | -nx6 | -nx7 | -sei*)
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1165,6 +1202,9 @@
-mac*)
os=`echo $os | sed -e 's|mac|macos|'`
;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
-linux*)
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
@@ -1177,6 +1217,9 @@
-opened*)
os=-openedition
;;
+ -os400*)
+ os=-os400
+ ;;
-wince*)
os=-wince
;;
@@ -1198,6 +1241,9 @@
-atheos*)
os=-atheos
;;
+ -syllable*)
+ os=-syllable
+ ;;
-386bsd)
os=-bsd
;;
@@ -1220,6 +1266,9 @@
-sinix*)
os=-sysv4
;;
+ -tpf*)
+ os=-tpf
+ ;;
-triton*)
os=-sysv3
;;
@@ -1256,6 +1305,9 @@
-kaos*)
os=-kaos
;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
-none)
;;
*)
@@ -1336,6 +1388,9 @@
*-ibm)
os=-aix
;;
+ *-knuth)
+ os=-mmixware
+ ;;
*-wec)
os=-proelf
;;
@@ -1468,9 +1523,15 @@
-mvs* | -opened*)
vendor=ibm
;;
+ -os400*)
+ vendor=ibm
+ ;;
-ptx*)
vendor=sequent
;;
+ -tpf*)
+ vendor=ibm
+ ;;
-vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
Modified: trunk/fep/Makefile.am
===================================================================
--- trunk/fep/Makefile.am 2005-02-21 22:45:09 UTC (rev 694)
+++ trunk/fep/Makefile.am 2005-02-22 02:26:10 UTC (rev 695)
@@ -8,7 +8,7 @@
uim_fep_SOURCES = uim-fep.c uim-fep.h udsock.c udsock.h str.c str.h callbacks.c callbacks.h draw.c draw.h escseq.c escseq.h key.c key.h read.c read.h
uim_fep_CPPFLAGS = -I$(top_srcdir)
uim_fep_CFLAGS =
-uim_fep_LDADD = $(top_builddir)/uim/libuim.la @LIBICONV@ @FEP_LIBADD@
+uim_fep_LDADD = $(top_builddir)/uim/libuim.la @FEP_LIBADD@
uim_fep_tick_SOURCES = uim-fep-tick.c uim-fep.h udsock.c udsock.h
Modified: trunk/ltmain.sh
===================================================================
--- trunk/ltmain.sh 2005-02-21 22:45:09 UTC (rev 694)
+++ trunk/ltmain.sh 2005-02-22 02:26:10 UTC (rev 695)
@@ -1,7 +1,7 @@
# ltmain.sh - Provide generalized library-building support services.
# NOTE: Changing this file will not affect anything until you rerun configure.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
# Free Software Foundation, Inc.
# Originally by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
#
@@ -24,6 +24,34 @@
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.14
+TIMESTAMP=" (1.1220.2.195 2005/02/12 12:12:33)"
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
# Check that we have a working $echo.
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
@@ -36,7 +64,7 @@
:
else
# Restart under the correct shell, and then maybe $echo will work.
- exec $SHELL "$0" --no-reexec ${1+"$@"}
+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
@@ -45,19 +73,9 @@
cat <<EOF
$*
EOF
- exit 0
+ exit $EXIT_SUCCESS
fi
-# The name of this program.
-progname=`$echo "$0" | ${SED} 's%^.*/%%'`
-modename="$progname"
-
-# Constants.
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.0a
-TIMESTAMP=" (1.1220.2.25 2003/08/01 19:08:35) Debian$Rev: 49 $"
-
default_mode=
help="Try \`$progname --help' for more information."
magic="%%%MAGIC variable%%%"
@@ -100,7 +118,7 @@
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
$echo "$modename: not configured to build any kind of library" 1>&2
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Global variables.
@@ -114,15 +132,20 @@
execute_dlfiles=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
+quote_scanset='[[~#^*{};<>?'"'"' ]'
#####################################
# Shell function definitions:
# This seems to be the best place for them
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
-win32_libid () {
+func_win32_libid ()
+{
win32_libid_type="unknown"
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
@@ -131,7 +154,7 @@
;;
*ar\ archive*) # could be an import, or static
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
- grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
win32_nmres=`eval $NM -f posix -A $1 | \
sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
if test "X$win32_nmres" = "Ximport" ; then
@@ -141,7 +164,7 @@
fi
fi
;;
- *DLL*)
+ *DLL*)
win32_libid_type="x86 DLL"
;;
*executable*) # but shell scripts are "executable" too...
@@ -155,9 +178,202 @@
$echo $win32_libid_type
}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ case $arg in
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+ arg="\"$arg\""
+ ;;
+ esac
+ CC_quoted="$CC_quoted $arg"
+ done
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ case $arg in
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
+ arg="\"$arg\""
+ ;;
+ esac
+ CC_quoted="$CC_quoted $arg"
+ done
+ case "$@ " in
+ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ $echo "$modename: unable to infer tagged configuration"
+ $echo "$modename: specify a tag with \`--tag'" 1>&2
+ exit $EXIT_FAILURE
+# else
+# $echo "$modename: using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ f_ex_an_ar_lib=`$echo "X$f_ex_an_ar_oldlib" | $Xsed -e 's%^.*/%%'`
+
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
+ $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
+ $show "cp $f_ex_an_ar_oldlib $f_ex_an_ar_dir/$f_ex_an_ar_lib"
+ $run eval "cp \$f_ex_an_ar_oldlib \$f_ex_an_ar_dir/\$f_ex_an_ar_lib"
+ $AR t "$f_ex_an_ar_oldlib" | sort | uniq -c \
+ | $EGREP -v '^[ ]*1[ ]' | while read count name
+ do
+ i=1
+ while test "$i" -le "$count"
+ do
+ # Put our $i before any first dot (extension)
+ # Never overwrite any file
+ name_to="$name"
+ while test "X$name_to" = "X$name" || test -f "$f_ex_an_ar_dir/$name_to"
+ do
+ name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
+ done
+ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_lib '$name' && $mv '$name' '$name_to')"
+ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_lib '$name' && $mv '$name' '$name_to' && $AR -d \$f_ex_an_ar_lib '$name')" || exit $?
+ i=`expr $i + 1`
+ done
+ done
+ $show "$rm $f_ex_an_ar_dir/$f_ex_an_ar_lib"
+ $run eval "$rm \$f_ex_an_ar_dir/\$f_ex_an_ar_lib"
+ fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+ my_status=""
+
+ $show "${rm}r $my_gentop"
+ $run ${rm}r "$my_gentop"
+ $show "$mkdir $my_gentop"
+ $run $mkdir "$my_gentop"
+ my_status=$?
+ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+ exit $my_status
+ fi
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+ my_xdir="$my_gentop/$my_xlib"
+
+ $show "${rm}r $my_xdir"
+ $run ${rm}r "$my_xdir"
+ $show "$mkdir $my_xdir"
+ $run $mkdir "$my_xdir"
+ status=$?
+ if test "$status" -ne 0 && test ! -d "$my_xdir"; then
+ exit $status
+ fi
+ case $host in
+ *-darwin*)
+ $show "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ if test -z "$run"; then
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ $show "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ lipo -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ ${rm}r unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd "$darwin_orig_dir"
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ fi # $run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+ func_extract_archives_result="$my_oldobjs"
+}
# End of Shell function definitions
#####################################
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
# Parse our command line options once, thoroughly.
while test "$#" -gt 0
do
@@ -177,12 +393,13 @@
;;
tag)
tagname="$arg"
+ preserve_args="${preserve_args}=$arg"
# Check whether tagname contains only valid characters
case $tagname in
*[!-_A-Za-z0-9,/]*)
$echo "$progname: invalid tag name: $tagname" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
@@ -192,10 +409,10 @@
# not specially marked.
;;
*)
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
+ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
taglist="$taglist $tagname"
# Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
else
$echo "$progname: ignoring unknown tag $tagname" 1>&2
fi
@@ -221,24 +438,25 @@
--version)
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
$echo
- $echo "Copyright (C) 2003 Free Software Foundation, Inc."
+ $echo "Copyright (C) 2005 Free Software Foundation, Inc."
$echo "This is free software; see the source for copying conditions. There is NO"
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
- exit 0
+ exit $?
;;
--config)
- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
+ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
# Now print the configurations for the tags.
for tagname in $taglist; do
- ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
+ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
done
- exit 0
+ exit $?
;;
--debug)
$echo "$progname: enabling shell trace mode"
set -x
+ preserve_args="$preserve_args $arg"
;;
--dry-run | -n)
@@ -257,7 +475,7 @@
else
$echo "disable static libraries"
fi
- exit 0
+ exit $?
;;
--finish) mode="finish" ;;
@@ -269,6 +487,7 @@
--quiet | --silent)
show=:
+ preserve_args="$preserve_args $arg"
;;
--tag) prevopt="--tag" prev=tag ;;
@@ -276,6 +495,7 @@
set tag "$optarg" ${1+"$@"}
shift
prev=tag
+ preserve_args="$preserve_args --tag"
;;
-dlopen)
@@ -286,7 +506,7 @@
-*)
$echo "$modename: unrecognized option \`$arg'" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
*)
@@ -299,7 +519,7 @@
if test -n "$prevopt"; then
$echo "$modename: option \`$prevopt' requires an argument" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# If this variable is set in any of the actions, the command in it
@@ -312,7 +532,7 @@
# Infer the operation mode.
if test -z "$mode"; then
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
- $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
+ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
case $nonopt in
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
mode=link
@@ -355,7 +575,7 @@
if test -n "$execute_dlfiles" && test "$mode" != execute; then
$echo "$modename: unrecognized option \`-dlopen'" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Change the help message to a mode-specific one.
@@ -370,9 +590,11 @@
# Get the compilation command and the source file.
base_compile=
srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
suppress_output=
arg_mode=normal
libobj=
+ later=
for arg
do
@@ -395,27 +617,22 @@
-o)
if test -n "$libobj" ; then
$echo "$modename: you cannot specify \`-o' more than once" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
arg_mode=target
continue
;;
- -static)
- build_old_libs=yes
+ -static | -prefer-pic | -prefer-non-pic)
+ later="$later $arg"
continue
;;
- -prefer-pic)
- pic_mode=yes
+ -no-suppress)
+ suppress_opt=no
continue
;;
- -prefer-non-pic)
- pic_mode=no
- continue
- ;;
-
-Xcompiler)
arg_mode=arg # the next one goes into the "base_compile" arg list
continue # The current "srcfile" will either be retained or
@@ -425,14 +642,14 @@
args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
lastarg=
save_ifs="$IFS"; IFS=','
- for arg in $args; do
+ for arg in $args; do
IFS="$save_ifs"
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@@ -463,8 +680,11 @@
case $lastarg in
# Double-quote args containing other shell metacharacters.
# Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ # in scan sets, and some SunOS ksh mistreat backslash-escaping
+ # in scan sets (worked around with variable expansion),
+ # and furthermore cannot handle '|' '&' '(' ')' in scan sets
+ # at all, so we specify them separately.
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
lastarg="\"$lastarg\""
;;
esac
@@ -475,11 +695,11 @@
case $arg_mode in
arg)
$echo "$modename: you must specify an argument for -Xcompile"
- exit 1
+ exit $EXIT_FAILURE
;;
target)
$echo "$modename: you must specify a target with \`-o'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
*)
# Get the name of the library object.
@@ -512,50 +732,30 @@
*.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
*)
$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
- # Infer tagged configuration to use if any are available and
- # if one wasn't chosen via the "--tag" command line option.
- # Only attempt this if the compiler in the base compile
- # command doesn't match the default compiler.
- if test -n "$available_tags" && test -z "$tagname"; then
- case $base_compile in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
- case "$base_compile " in
- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
- # The compiler in the base compile command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit 1
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -static)
+ build_old_libs=yes
+ continue
;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
esac
- fi
+ done
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
@@ -569,7 +769,7 @@
if test -z "$base_compile"; then
$echo "$modename: you must specify a compilation command" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Delete any leftover library objects.
@@ -580,7 +780,7 @@
fi
$run $rm $removelist
- trap "$run $rm $removelist; exit 1" 1 2 15
+ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
# On Cygwin there's no "real" PIC flag so we must build both object types
case $host_os in
@@ -599,7 +799,7 @@
output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
removelist="$removelist $output_obj $lockfile"
- trap "$run $rm $removelist; exit 1" 1 2 15
+ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
else
output_obj=
need_locks=no
@@ -609,7 +809,7 @@
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
if test "$need_locks" = yes; then
- until $run ln "$0" "$lockfile" 2>/dev/null; do
+ until $run ln "$progpath" "$lockfile" 2>/dev/null; do
$show "Waiting for $lockfile to be removed"
sleep 2
done
@@ -627,7 +827,7 @@
compiler."
$run $rm $removelist
- exit 1
+ exit $EXIT_FAILURE
fi
$echo $srcfile > "$lockfile"
fi
@@ -682,7 +882,7 @@
if $run eval "$command"; then :
else
test -n "$output_obj" && $run $rm $removelist
- exit 1
+ exit $EXIT_FAILURE
fi
if test "$need_locks" = warn &&
@@ -702,7 +902,7 @@
compiler."
$run $rm $removelist
- exit 1
+ exit $EXIT_FAILURE
fi
# Just move the object if needed, then go on to compile the next one
@@ -723,7 +923,9 @@
EOF
# Allow error messages only from the first compilation.
- suppress_output=' >/dev/null 2>&1'
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
else
# No PIC object so indicate it doesn't exist in the libtool
# object file.
@@ -752,7 +954,7 @@
if $run eval "$command"; then :
else
$run $rm $removelist
- exit 1
+ exit $EXIT_FAILURE
fi
if test "$need_locks" = warn &&
@@ -772,7 +974,7 @@
compiler."
$run $rm $removelist
- exit 1
+ exit $EXIT_FAILURE
fi
# Just move the object if needed
@@ -810,7 +1012,7 @@
$run $rm "$lockfile"
fi
- exit 0
+ exit $EXIT_SUCCESS
;;
# libtool link mode
@@ -836,7 +1038,7 @@
;;
esac
libtool_args="$nonopt"
- base_compile="$nonopt"
+ base_compile="$nonopt $@"
compile_command="$nonopt"
finalize_command="$nonopt"
@@ -868,6 +1070,7 @@
no_install=no
objs=
non_pic_objects=
+ precious_files_regex=
prefer_static_libs=no
preload=no
prev=
@@ -881,6 +1084,8 @@
vinfo=
vinfo_number=no
+ func_infer_tag $base_compile
+
# We need to know -static, to get the right output filenames.
for arg
do
@@ -912,10 +1117,9 @@
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
arg="$1"
- base_compile="$base_compile $arg"
shift
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
;;
*) qarg=$arg ;;
@@ -976,7 +1180,7 @@
export_symbols="$arg"
if test ! -f "$arg"; then
$echo "$modename: symbol file \`$arg' does not exist"
- exit 1
+ exit $EXIT_FAILURE
fi
prev=
continue
@@ -991,6 +1195,11 @@
prev=
continue
;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
release)
release="-$arg"
prev=
@@ -1023,7 +1232,7 @@
test "$pic_object" = none && \
test "$non_pic_object" = none; then
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Extract subdirectory from the argument.
@@ -1076,7 +1285,7 @@
# Only an error if not doing a dry-run.
if test -z "$run"; then
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit 1
+ exit $EXIT_FAILURE
else
# Dry-run case.
@@ -1097,7 +1306,7 @@
done
else
$echo "$modename: link input file \`$save_arg' does not exist"
- exit 1
+ exit $EXIT_FAILURE
fi
arg=$save_arg
prev=
@@ -1109,7 +1318,7 @@
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
if test "$prev" = rpath; then
@@ -1149,6 +1358,16 @@
finalize_command="$finalize_command $qarg"
continue
;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ darwin_framework)
+ compiler_flags="$compiler_flags $arg"
+ prev=
+ continue
+ ;;
*)
eval "$prev=\"\$arg\""
prev=
@@ -1197,7 +1416,7 @@
-export-symbols | -export-symbols-regex)
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
$echo "$modename: more than one -exported-symbols argument is not allowed"
- exit 1
+ exit $EXIT_FAILURE
fi
if test "X$arg" = "X-export-symbols"; then
prev=expsyms
@@ -1207,6 +1426,12 @@
continue
;;
+ -framework)
+ prev=darwin_framework
+ compiler_flags="$compiler_flags $arg"
+ continue
+ ;;
+
-inst-prefix-dir)
prev=inst_prefix
continue
@@ -1233,7 +1458,7 @@
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
dir="$absdir"
;;
@@ -1267,7 +1492,7 @@
# These systems don't actually have a C library (as such)
test "X$arg" = "X-lc" && continue
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -1278,7 +1503,7 @@
esac
elif test "X$arg" = "X-lc_r"; then
case $host in
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -1288,23 +1513,41 @@
continue
;;
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ -model)
+ compile_command="$compile_command $arg"
+ compiler_flags="$compiler_flags $arg"
+ finalize_command="$finalize_command $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ compiler_flags="$compiler_flags $arg"
+ compile_command="$compile_command $arg"
+ finalize_command="$finalize_command $arg"
+ continue
+ ;;
+
-module)
module=yes
continue
;;
- # gcc -m* arguments should be passed to the linker via $compiler_flags
- # in order to pass architecture information to the linker
- # (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
- # but this is not reliable with gcc because gcc may use -mfoo to
- # select a different linker, different libraries, etc, while
- # -Wl,-mfoo simply passes -mfoo to the linker.
- -m*)
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m* pass through architecture-specific compiler args for GCC
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*)
+
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@@ -1352,6 +1595,11 @@
-o) prev=output ;;
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
-release)
prev=release
continue
@@ -1374,7 +1622,7 @@
[\\/]* | [A-Za-z]:[\\/]*) ;;
*)
$echo "$modename: only absolute run-paths are allowed" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
case "$xrpath " in
@@ -1415,7 +1663,7 @@
for flag in $args; do
IFS="$save_ifs"
case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
flag="\"$flag\""
;;
esac
@@ -1433,7 +1681,7 @@
for flag in $args; do
IFS="$save_ifs"
case $flag in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
flag="\"$flag\""
;;
esac
@@ -1466,7 +1714,7 @@
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@@ -1497,7 +1745,7 @@
test "$pic_object" = none && \
test "$non_pic_object" = none; then
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Extract subdirectory from the argument.
@@ -1550,7 +1798,7 @@
# Only an error if not doing a dry-run.
if test -z "$run"; then
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
- exit 1
+ exit $EXIT_FAILURE
else
# Dry-run case.
@@ -1600,7 +1848,7 @@
# to be aesthetically quoted because they are evaled later.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@@ -1617,50 +1865,9 @@
if test -n "$prev"; then
$echo "$modename: the \`$prevarg' option requires an argument" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
- # Infer tagged configuration to use if any are available and
- # if one wasn't chosen via the "--tag" command line option.
- # Only attempt this if the compiler in the base link
- # command doesn't match the default compiler.
- if test -n "$available_tags" && test -z "$tagname"; then
- case $base_compile in
- # Blanks in the command may have been stripped by the calling shell,
- # but not from the CC environment variable when configure was run.
- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
- # Blanks at the start of $base_compile will cause this to fail
- # if we don't check for them as well.
- *)
- for z in $available_tags; do
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
- # Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
- case $base_compile in
- "$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
- # The compiler in $compile_command matches
- # the one in the tagged configuration.
- # Assume this is the tagged configuration we want.
- tagname=$z
- break
- ;;
- esac
- fi
- done
- # If $tagname still isn't set, then no tagged configuration
- # was found and let the user know that the "--tag" command
- # line option must be used.
- if test -z "$tagname"; then
- $echo "$modename: unable to infer tagged configuration"
- $echo "$modename: specify a tag with \`--tag'" 1>&2
- exit 1
-# else
-# $echo "$modename: using $tagname tagged configuration"
- fi
- ;;
- esac
- fi
-
if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
compile_command="$compile_command $arg"
@@ -1702,7 +1909,7 @@
"")
$echo "$modename: you must specify an output file" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
*.$libext) linkmode=oldlib ;;
*.lo | *.$objext) linkmode=obj ;;
@@ -1712,7 +1919,7 @@
case $host in
*cygwin* | *mingw* | *pw32*)
- # don't eliminate duplcations in $postdeps and $predeps
+ # don't eliminate duplications in $postdeps and $predeps
duplicate_compiler_generated_deps=yes
;;
*)
@@ -1765,7 +1972,7 @@
*.la) ;;
*)
$echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
done
@@ -1803,18 +2010,23 @@
lib=
found=no
case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags $deplib"
+ fi
+ continue
+ ;;
-l*)
if test "$linkmode" != lib && test "$linkmode" != prog; then
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
continue
fi
- if test "$pass" = conv; then
- deplibs="$deplib $deplibs"
- continue
- fi
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
- for search_ext in .la $shrext .so .a; do
+ for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
lib="$searchdir/lib${name}${search_ext}"
if test -f "$lib"; then
@@ -1890,11 +2102,11 @@
fi
if test "$pass" = scan; then
deplibs="$deplib $deplibs"
- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
else
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
fi
+ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
;;
*)
$echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
@@ -1922,7 +2134,22 @@
fi
case $linkmode in
lib)
- if test "$deplibs_check_method" != pass_all; then
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method
+ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+ if eval $echo \"$deplib\" 2>/dev/null \
+ | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
$echo
$echo "*** Warning: Trying to link with static lib archive $deplib."
$echo "*** I have the capability to make that library automatically link in when"
@@ -1973,14 +2200,14 @@
if test "$found" = yes || test -f "$lib"; then :
else
$echo "$modename: cannot find the library \`$lib'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Check to see that this really is a libtool archive.
if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
@@ -1996,7 +2223,9 @@
# it will not redefine variables installed, or shouldnotlink
installed=yes
shouldnotlink=no
+ avoidtemprpath=
+
# Read the .la file
case $lib in
*/* | *\\*) . $lib ;;
@@ -2016,7 +2245,7 @@
if test -z "$libdir"; then
if test -z "$old_library"; then
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# It is a libtool convenience library, so add in its objects.
convenience="$convenience $ladir/$objdir/$old_library"
@@ -2033,12 +2262,12 @@
done
elif test "$linkmode" != prog && test "$linkmode" != lib; then
$echo "$modename: \`$lib' is not a convenience library" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
continue
fi # $pass = conv
-
+
# Get the name of the library we link against.
linklib=
for l in $old_library $library_names; do
@@ -2046,16 +2275,18 @@
done
if test -z "$linklib"; then
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# This library was specified with -dlopen.
if test "$pass" = dlopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
@@ -2092,11 +2323,19 @@
dir="$libdir"
absdir="$libdir"
fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
- # Remove this search path later
- notinst_path="$notinst_path $abs_ladir"
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
fi # $installed = yes
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
@@ -2104,7 +2343,7 @@
if test "$pass" = dlpreopen; then
if test -z "$libdir"; then
$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Prefer using a static library (so that no silly _DYNAMIC symbols
# are required to link).
@@ -2131,7 +2370,7 @@
continue
fi
-
+
if test "$linkmode" = prog && test "$pass" != link; then
newlib_search_path="$newlib_search_path $ladir"
deplibs="$lib $deplibs"
@@ -2169,7 +2408,7 @@
if test -n "$library_names" &&
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var"; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
# Make sure the rpath contains only unique directories.
case "$temp_rpath " in
*" $dir "*) ;;
@@ -2218,17 +2457,18 @@
need_relink=yes
fi
# This is a shared library
-
- # Warn about portability, can't link against -module's on some systems (darwin)
- if test "$shouldnotlink" = yes && test "$pass" = link ; then
+
+ # Warn about portability, can't link against -module's on
+ # some systems (darwin)
+ if test "$shouldnotlink" = yes && test "$pass" = link ; then
$echo
if test "$linkmode" = prog; then
$echo "*** Warning: Linking the executable $output against the loadable module"
else
$echo "*** Warning: Linking the shared library $output against the loadable module"
fi
- $echo "*** $linklib is not portable!"
- fi
+ $echo "*** $linklib is not portable!"
+ fi
if test "$linkmode" = lib &&
test "$hardcode_into_libs" = yes; then
# Hardcode the library path.
@@ -2286,9 +2526,10 @@
else
$show "extracting exported symbol list from \`$soname'"
save_ifs="$IFS"; IFS='~'
- eval cmds=\"$extract_expsyms_cmds\"
+ cmds=$extract_expsyms_cmds
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -2299,9 +2540,10 @@
if test -f "$output_objdir/$newlib"; then :; else
$show "generating import library for \`$soname'"
save_ifs="$IFS"; IFS='~'
- eval cmds=\"$old_archive_from_expsyms_cmds\"
+ cmds=$old_archive_from_expsyms_cmds
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -2324,9 +2566,9 @@
case $host in
*-*-sco3.2v5* ) add_dir="-L$dir" ;;
*-*-darwin* )
- # if the lib is a module then we can not link against it, someone
- # is ignoring the new warnings I added
- if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
+ # if the lib is a module then we can not link against
+ # it, someone is ignoring the new warnings I added
+ if /usr/bin/file -L $add 2> /dev/null | $EGREP "bundle" >/dev/null ; then
$echo "** Warning, lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
$echo
@@ -2334,7 +2576,7 @@
$echo "** The link will probably fail, sorry"
else
add="$dir/$old_library"
- fi
+ fi
fi
esac
elif test "$hardcode_minus_L" = no; then
@@ -2376,7 +2618,7 @@
if test "$lib_linked" != yes; then
$echo "$modename: configuration error: unsupported hardcode properties"
- exit 1
+ exit $EXIT_FAILURE
fi
if test -n "$add_shlibpath"; then
@@ -2419,7 +2661,8 @@
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
- if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
add="$inst_prefix_dir$libdir/$linklib"
else
add="$libdir/$linklib"
@@ -2499,7 +2742,8 @@
if test "$linkmode" = lib; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
test "$link_static" = yes; }; then
# Extract -R from dependency_libs
temp_deplibs=
@@ -2556,7 +2800,7 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
if test "$absdir" != "$libdir"; then
$echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
@@ -2566,7 +2810,8 @@
depdepl=
case $host in
*-*-darwin*)
- # we do not want to link against static libs, but need to link against shared
+ # we do not want to link against static libs,
+ # but need to link against shared
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
if test -n "$deplibrary_names" ; then
for tmp in $deplibrary_names ; do
@@ -2574,43 +2819,42 @@
done
if test -f "$path/$depdepl" ; then
depdepl="$path/$depdepl"
- fi
+ fi
# do not add paths which are already there
case " $newlib_search_path " in
*" $path "*) ;;
*) newlib_search_path="$newlib_search_path $path";;
esac
- path=""
fi
+ path=""
;;
*)
- path="-L$path"
+ path="-L$path"
+ ;;
+ esac
;;
- esac
-
- ;;
- -l*)
+ -l*)
case $host in
*-*-darwin*)
- # Again, we only want to link against shared libraries
- eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
- for tmp in $newlib_search_path ; do
- if test -f "$tmp/lib$tmp_libs.dylib" ; then
- eval depdepl="$tmp/lib$tmp_libs.dylib"
- break
- fi
- done
- path=""
+ # Again, we only want to link against shared libraries
+ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+ for tmp in $newlib_search_path ; do
+ if test -f "$tmp/lib$tmp_libs.dylib" ; then
+ eval depdepl="$tmp/lib$tmp_libs.dylib"
+ break
+ fi
+ done
+ path=""
;;
*) continue ;;
- esac
+ esac
;;
*) continue ;;
esac
case " $deplibs " in
*" $depdepl "*) ;;
- *) deplibs="$deplibs $depdepl" ;;
- esac
+ *) deplibs="$depdepl $deplibs" ;;
+ esac
case " $deplibs " in
*" $path "*) ;;
*) deplibs="$deplibs $path" ;;
@@ -2700,7 +2944,8 @@
eval $var=\"$tmp_libs\"
done # for var
fi
- # Last step: remove runtime libs from dependency_libs (they stay in deplibs)
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
tmp_libs=
for i in $dependency_libs ; do
case " $predeps $postdeps $compiler_lib_search_path " in
@@ -2760,19 +3005,19 @@
case $outputname in
lib*)
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
- eval shared_ext=\"$shrext\"
+ eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
;;
*)
if test "$module" = no; then
$echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
if test "$need_lib_prefix" != no; then
# Add the "lib" prefix for modules if required
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
- eval shared_ext=\"$shrext\"
+ eval shared_ext=\"$shrext_cmds\"
eval libname=\"$libname_spec\"
else
libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
@@ -2783,7 +3028,7 @@
if test -n "$objs"; then
if test "$deplibs_check_method" != pass_all; then
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
- exit 1
+ exit $EXIT_FAILURE
else
$echo
$echo "*** Warning: Linking the shared library $output against the non-libtool"
@@ -2831,13 +3076,13 @@
if test -n "$8"; then
$echo "$modename: too many parameters to \`-version-info'" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
# to make the code below a bit more comprehensible
-
+
case $vinfo_number in
yes)
number_major="$2"
@@ -2877,36 +3122,36 @@
# Check that each of the things are valid numbers.
case $current in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
case $revision in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
case $age in
- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
$echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
if test "$age" -gt "$current"; then
$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Calculate the version variables.
@@ -2923,7 +3168,7 @@
versuffix="$major.$age.$revision"
# Darwin ld doesn't like 0 for these options...
minor_current=`expr $current + 1`
- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
;;
freebsd-aout)
@@ -2995,7 +3240,7 @@
*)
$echo "$modename: unknown library version type \`$version_type'" 1>&2
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
@@ -3049,6 +3294,12 @@
*.$objext)
;;
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
removelist="$removelist $p"
;;
*) ;;
@@ -3123,7 +3374,7 @@
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
;;
- *-*-openbsd* | *-*-freebsd*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
# Do not include libc due to us having libc/libc_r.
test "X$arg" = "X-lc" && continue
;;
@@ -3528,7 +3779,7 @@
fi
# Get the real and link names of the library.
- eval shared_ext=\"$shrext\"
+ eval shared_ext=\"$shrext_cmds\"
eval library_names=\"$library_names_spec\"
set dummy $library_names
realname="$2"
@@ -3558,10 +3809,11 @@
$show "generating symbol list for \`$libname.la'"
export_symbols="$output_objdir/$libname.exp"
$run $rm $export_symbols
- eval cmds=\"$export_symbols_cmds\"
+ cmds=$export_symbols_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
if len=`expr "X$cmd" : ".*"` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
$show "$cmd"
@@ -3591,12 +3843,12 @@
for test_deplib in $deplibs; do
case " $convenience " in
*" $test_deplib "*) ;;
- *)
+ *)
tmp_deplibs="$tmp_deplibs $test_deplib"
;;
esac
done
- deplibs="$tmp_deplibs"
+ deplibs="$tmp_deplibs"
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
@@ -3604,67 +3856,13 @@
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
fi
fi
-
+
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
linker_flags="$linker_flags $flag"
@@ -3678,19 +3876,23 @@
# Do each of the archive commands.
if test "$module" = yes && test -n "$module_cmds" ; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
- eval cmds=\"$module_expsym_cmds\"
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
else
- eval cmds=\"$module_cmds\"
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
fi
else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval cmds=\"$archive_expsym_cmds\"
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
else
- eval cmds=\"$archive_cmds\"
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
fi
fi
- if test "X$skipped_export" != "X:" && len=`expr "X$cmds" : ".*"` &&
+ if test "X$skipped_export" != "X:" && len=`expr "X$test_cmds" : ".*"` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
:
else
@@ -3709,6 +3911,7 @@
save_libobjs=$libobjs
fi
save_output=$output
+ output_la=`$echo "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -3718,7 +3921,7 @@
delfiles=
last_robj=
k=1
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
# Loop over the list of objects to be linked.
for obj in $save_libobjs
do
@@ -3738,9 +3941,9 @@
# the last one created.
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
fi
- last_robj=$output_objdir/$save_output-${k}.$objext
+ last_robj=$output_objdir/$output_la-${k}.$objext
k=`expr $k + 1`
- output=$output_objdir/$save_output-${k}.$objext
+ output=$output_objdir/$output_la-${k}.$objext
objlist=$obj
len=1
fi
@@ -3760,13 +3963,13 @@
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
fi
- # Set up a command to remove the reloadale object files
+ # Set up a command to remove the reloadable object files
# after they are used.
i=0
while test "$i" -lt "$k"
do
i=`expr $i + 1`
- delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
done
$echo "creating a temporary reloadable object file: $output"
@@ -3791,19 +3994,28 @@
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
- eval cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
else
- eval cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
fi
# Append the command to remove the reloadable object files
# to the just-reset $cmds.
- eval cmds=\"\$cmds~$rm $delfiles\"
+ eval cmds=\"\$cmds~\$rm $delfiles\"
fi
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -3812,7 +4024,7 @@
# Restore the uninstalled library and exit
if test "$mode" = relink; then
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
- exit 0
+ exit $EXIT_SUCCESS
fi
# Create links to the real library.
@@ -3860,7 +4072,7 @@
*.lo)
if test -n "$objs$old_deplibs"; then
$echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
libobj="$output"
obj=`$echo "X$output" | $Xsed -e "$lo2o"`
@@ -3889,64 +4101,10 @@
eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
else
gentop="$output_objdir/${obj}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- for xlib in $convenience; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
@@ -3954,10 +4112,11 @@
reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
- eval cmds=\"$reload_cmds\"
+ cmds=$reload_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -3970,7 +4129,7 @@
$run ${rm}r $gentop
fi
- exit 0
+ exit $EXIT_SUCCESS
fi
if test "$build_libtool_libs" != yes; then
@@ -3983,17 +4142,18 @@
# accidentally link it into a program.
# $show "echo timestamp > $libobj"
# $run eval "echo timestamp > $libobj" || exit $?
- exit 0
+ exit $EXIT_SUCCESS
fi
if test -n "$pic_flag" || test "$pic_mode" != default; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
output="$libobj"
- eval cmds=\"$reload_cmds\"
+ cmds=$reload_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -4005,7 +4165,7 @@
$run ${rm}r $gentop
fi
- exit 0
+ exit $EXIT_SUCCESS
;;
prog)
@@ -4206,12 +4366,12 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$output.exp"
+ export_symbols="$output_objdir/$outputname.exp"
$run $rm $export_symbols
$run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
else
- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
+ $run eval "${SED} -e 's/\([ ][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
$run eval 'mv "$nlist"T "$nlist"'
fi
fi
@@ -4263,7 +4423,26 @@
#endif
/* The mapping between symbol names and symbols. */
+"
+
+ case $host in
+ *cygwin* | *mingw* )
+ $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs */
+struct {
+"
+ ;;
+ * )
+ $echo >> "$output_objdir/$dlsyms" "\
const struct {
+"
+ ;;
+ esac
+
+
+ $echo >> "$output_objdir/$dlsyms" "\
const char *name;
lt_ptr address;
}
@@ -4323,7 +4502,7 @@
;;
*)
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
else
@@ -4411,7 +4590,7 @@
# Link the executable and exit
$show "$link_command"
$run eval "$link_command" || exit $?
- exit 0
+ exit $EXIT_SUCCESS
fi
if test "$hardcode_action" = relink; then
@@ -4466,10 +4645,10 @@
fi
# Quote $echo for shipping.
- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
- case $0 in
- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
- *) qecho="$SHELL `pwd`/$0 --fallback-echo";;
+ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+ case $progpath in
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
esac
qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
else
@@ -4492,10 +4671,10 @@
esac
case $host in
*cygwin* | *mingw* )
- cwrappersource=`$echo ${objdir}/lt-${output}.c`
+ cwrappersource=`$echo ${objdir}/lt-${outputname}.c`
cwrapper=`$echo ${output}.exe`
$rm $cwrappersource $cwrapper
- trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
+ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
cat > $cwrappersource <<EOF
@@ -4504,7 +4683,7 @@
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
-
+
This wrapper executable should never be moved out of the build directory.
If it is, it will not operate correctly.
@@ -4536,7 +4715,7 @@
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
defined (__OS2__)
#define HAVE_DOS_BASED_FILE_SYSTEM
-#ifndef DIR_SEPARATOR_2
+#ifndef DIR_SEPARATOR_2
#define DIR_SEPARATOR_2 '\\'
#endif
#endif
@@ -4567,7 +4746,7 @@
{
char **newargz;
int i;
-
+
program_name = (char *) xstrdup ((char *) basename (argv[0]));
newargz = XMALLOC(char *, argc+2);
EOF
@@ -4580,7 +4759,7 @@
newargz[1] = fnqualify(argv[0]);
/* we know the script has the same name, without the .exe */
/* so make sure newargz[1] doesn't end in .exe */
- strendzap(newargz[1],".exe");
+ strendzap(newargz[1],".exe");
for (i = 1; i < argc; i++)
newargz[i+1] = xstrdup(argv[i]);
newargz[argc+1] = NULL;
@@ -4603,7 +4782,7 @@
return p;
}
-char *
+char *
xstrdup (const char *string)
{
return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
@@ -4617,7 +4796,7 @@
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
/* Skip over the disk name in MSDOS pathnames. */
- if (isalpha (name[0]) && name[1] == ':')
+ if (isalpha (name[0]) && name[1] == ':')
name += 2;
#endif
@@ -4627,7 +4806,7 @@
return (char *) base;
}
-char *
+char *
fnqualify(const char *path)
{
size_t size;
@@ -4655,7 +4834,7 @@
}
char *
-strendzap(char *str, const char *pat)
+strendzap(char *str, const char *pat)
{
size_t len, patlen;
@@ -4675,7 +4854,7 @@
}
static void
-lt_error_core (int exit_status, const char * mode,
+lt_error_core (int exit_status, const char * mode,
const char * message, va_list ap)
{
fprintf (stderr, "%s: %s: ", program_name, mode);
@@ -4704,7 +4883,7 @@
;;
esac
$rm $output
- trap "$rm $output; exit 1" 1 2 15
+ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
$echo > $output "\
#! $SHELL
@@ -4725,7 +4904,7 @@
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
relink_command=\"$relink_command\"
@@ -4804,7 +4983,7 @@
else
$echo \"\$relink_command_output\" >&2
$rm \"\$progdir/\$file\"
- exit 1
+ exit $EXIT_FAILURE
fi
fi
@@ -4866,20 +5045,20 @@
esac
$echo >> $output "\
\$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
- exit 1
+ exit $EXIT_FAILURE
fi
else
# The program doesn't exist.
\$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
\$echo \"This script is just a wrapper for \$program.\" 1>&2
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
fi\
"
chmod +x $output
fi
- exit 0
+ exit $EXIT_SUCCESS
;;
esac
@@ -4902,76 +5081,21 @@
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- $show "${rm}r $gentop"
- $run ${rm}r "$gentop"
- $show "$mkdir $gentop"
- $run $mkdir "$gentop"
- status=$?
- if test "$status" -ne 0 && test ! -d "$gentop"; then
- exit $status
- fi
generated="$generated $gentop"
- # Add in members from convenience archives.
- for xlib in $addlibs; do
- # Extract the objects.
- case $xlib in
- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
- *) xabs=`pwd`"/$xlib" ;;
- esac
- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
- xdir="$gentop/$xlib"
-
- $show "${rm}r $xdir"
- $run ${rm}r "$xdir"
- $show "$mkdir $xdir"
- $run $mkdir "$xdir"
- status=$?
- if test "$status" -ne 0 && test ! -d "$xdir"; then
- exit $status
- fi
- # We will extract separately just the conflicting names and we will no
- # longer touch any unique names. It is faster to leave these extract
- # automatically by $AR in one run.
- $show "(cd $xdir && $AR x $xabs)"
- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
- if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
- :
- else
- $echo "$modename: warning: object name conflicts; renaming object files" 1>&2
- $echo "$modename: warning: to ensure that they will not overwrite" 1>&2
- $AR t "$xabs" | sort | uniq -cd | while read -r count name
- do
- i=1
- while test "$i" -le "$count"
- do
- # Put our $i before any first dot (extension)
- # Never overwrite any file
- name_to="$name"
- while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
- do
- name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
- done
- $show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
- $run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
- i=`expr $i + 1`
- done
- done
- fi
-
- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
- done
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
- eval cmds=\"$old_archive_from_new_cmds\"
+ cmds=$old_archive_from_new_cmds
else
eval cmds=\"$old_archive_cmds\"
if len=`expr "X$cmds" : ".*"` &&
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
- :
+ cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
$echo "using piecewise archive linking..."
@@ -4998,7 +5122,7 @@
for obj in $save_oldobjs
do
last_oldobj=$obj
- done
+ done
for obj in $save_oldobjs
do
oldobjs="$objlist $obj"
@@ -5012,7 +5136,7 @@
oldobjs=$objlist
if test "$obj" = "$last_oldobj" ; then
RANLIB=$save_RANLIB
- fi
+ fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
objlist=
@@ -5023,12 +5147,13 @@
if test "X$oldobjs" = "X" ; then
eval cmds=\"\$concat_cmds\"
else
- eval cmds=\"\$concat_cmds~$old_archive_cmds\"
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
fi
fi
fi
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
+ eval cmd=\"$cmd\"
IFS="$save_ifs"
$show "$cmd"
$run eval "$cmd" || exit $?
@@ -5060,11 +5185,13 @@
fi
done
# Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
- relink_command=
- fi
+ relink_command=
+ fi
+
+
# Only create the output if not a dry run.
if test -z "$run"; then
for installed in no yes; do
@@ -5082,7 +5209,7 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
if test -z "$libdir"; then
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
newdependency_libs="$newdependency_libs $libdir/$name"
;;
@@ -5096,7 +5223,7 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
newdlfiles="$newdlfiles $libdir/$name"
done
@@ -5107,7 +5234,7 @@
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
if test -z "$libdir"; then
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
newdlprefiles="$newdlprefiles $libdir/$name"
done
@@ -5115,7 +5242,7 @@
else
newdlfiles=
for lib in $dlfiles; do
- case $lib in
+ case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
@@ -5124,7 +5251,7 @@
dlfiles="$newdlfiles"
newdlprefiles=
for lib in $dlprefiles; do
- case $lib in
+ case $lib in
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
@@ -5187,7 +5314,7 @@
$run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
;;
esac
- exit 0
+ exit $EXIT_SUCCESS
;;
# libtool install mode
@@ -5202,7 +5329,7 @@
# Aesthetically quote it.
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@@ -5218,7 +5345,7 @@
# Aesthetically quote it.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@@ -5266,7 +5393,7 @@
# Aesthetically quote the argument.
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
case $arg in
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
+ *$quote_scanset* | *]* | *\|* | *\&* | *\(* | *\)* | "")
arg="\"$arg\""
;;
esac
@@ -5276,13 +5403,13 @@
if test -z "$install_prog"; then
$echo "$modename: you must specify an install program" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
if test -n "$prev"; then
$echo "$modename: the \`$prev' option requires an argument" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
if test -z "$files"; then
@@ -5292,7 +5419,7 @@
$echo "$modename: you must specify a destination" 1>&2
fi
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Strip any trailing slash from the destination.
@@ -5313,7 +5440,7 @@
if test "$#" -gt 2; then
$echo "$modename: \`$dest' is not a directory" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
fi
case $destdir in
@@ -5325,7 +5452,7 @@
*)
$echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
done
@@ -5354,7 +5481,7 @@
else
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
library_names=
@@ -5396,7 +5523,7 @@
# but it's something to keep an eye on.
if test "$inst_prefix_dir" = "$destdir"; then
$echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
if test -n "$inst_prefix_dir"; then
@@ -5411,7 +5538,7 @@
if $run eval "$relink_command"; then :
else
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
fi
@@ -5446,10 +5573,11 @@
# Do each command in the postinstall commands.
lib="$destdir/$realname"
- eval cmds=\"$postinstall_cmds\"
+ cmds=$postinstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -5489,7 +5617,7 @@
*)
$echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
@@ -5507,7 +5635,7 @@
$show "$install_prog $staticobj $staticdest"
$run eval "$install_prog \$staticobj \$staticdest" || exit $?
fi
- exit 0
+ exit $EXIT_SUCCESS
;;
*)
@@ -5561,7 +5689,7 @@
# Check the variables that should have been set.
if test -z "$notinst_deplibs"; then
$echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
finalize=yes
@@ -5602,8 +5730,12 @@
tmpdir="/tmp"
test -n "$TMPDIR" && tmpdir="$TMPDIR"
tmpdir="$tmpdir/libtool-$$"
- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
+ save_umask=`umask`
+ umask 0077
+ if $mkdir "$tmpdir"; then
+ umask $save_umask
else
+ umask $save_umask
$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
continue
fi
@@ -5662,16 +5794,17 @@
$show "$install_prog $file $oldlib"
$run eval "$install_prog \$file \$oldlib" || exit $?
- if test -n "$stripme" && test -n "$striplib"; then
+ if test -n "$stripme" && test -n "$old_striplib"; then
$show "$old_striplib $oldlib"
$run eval "$old_striplib $oldlib" || exit $?
fi
# Do each command in the postinstall commands.
- eval cmds=\"$old_postinstall_cmds\"
+ cmds=$old_postinstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || exit $?
done
@@ -5685,9 +5818,9 @@
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
test -n "$run" && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $0 --finish$current_libdirs'
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
else
- exit 0
+ exit $EXIT_SUCCESS
fi
;;
@@ -5706,10 +5839,11 @@
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
- eval cmds=\"$finish_cmds\"
+ cmds=$finish_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd" || admincmds="$admincmds
$cmd"
@@ -5726,7 +5860,7 @@
fi
# Exit here if they wanted silent mode.
- test "$show" = : && exit 0
+ test "$show" = : && exit $EXIT_SUCCESS
$echo "----------------------------------------------------------------------"
$echo "Libraries have been installed in:"
@@ -5762,7 +5896,7 @@
$echo "See any operating system documentation about shared libraries for"
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
$echo "----------------------------------------------------------------------"
- exit 0
+ exit $EXIT_SUCCESS
;;
# libtool execute mode
@@ -5774,7 +5908,7 @@
if test -z "$cmd"; then
$echo "$modename: you must specify a COMMAND" 1>&2
$echo "$help"
- exit 1
+ exit $EXIT_FAILURE
fi
# Handle -dlopen flags immediately.
@@ -5782,7 +5916,7 @@
if test ! -f "$file"; then
$echo "$modename: \`$file' is not a file" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
dir=
@@ -5793,7 +5927,7 @@
else
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
# Read the libtool library.
@@ -5820,7 +5954,7 @@
dir="$dir/$objdir"
else
$echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
;;
@@ -5900,7 +6034,7 @@
$echo "export $shlibpath_var"
fi
$echo "$cmd$args"
- exit 0
+ exit $EXIT_SUCCESS
fi
;;
@@ -5928,7 +6062,7 @@
if test -z "$rm"; then
$echo "$modename: you must specify an RM program" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
rmdirs=
@@ -5983,10 +6117,11 @@
if test "$mode" = uninstall; then
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- eval cmds=\"$postuninstall_cmds\"
+ cmds=$postuninstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd"
if test "$?" -ne 0 && test "$rmforce" != yes; then
@@ -5998,10 +6133,11 @@
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- eval cmds=\"$old_postuninstall_cmds\"
+ cmds=$old_postuninstall_cmds
save_ifs="$IFS"; IFS='~'
for cmd in $cmds; do
IFS="$save_ifs"
+ eval cmd=\"$cmd\"
$show "$cmd"
$run eval "$cmd"
if test "$?" -ne 0 && test "$rmforce" != yes; then
@@ -6040,7 +6176,7 @@
if test "$mode" = clean ; then
noexename=$name
case $file in
- *.exe)
+ *.exe)
file=`$echo $file|${SED} 's,.exe$,,'`
noexename=`$echo $name|${SED} 's,.exe$,,'`
# $file with .exe has already been added to rmfiles,
@@ -6085,20 +6221,20 @@
"")
$echo "$modename: you must specify a MODE" 1>&2
$echo "$generic_help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
if test -z "$exec_cmd"; then
$echo "$modename: invalid operation mode \`$mode'" 1>&2
$echo "$generic_help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
fi
fi # test -z "$show_help"
if test -n "$exec_cmd"; then
eval exec $exec_cmd
- exit 1
+ exit $EXIT_FAILURE
fi
# We need to display help for each of the modes.
@@ -6134,7 +6270,7 @@
a more detailed description of MODE.
Report bugs to <bug-libtool at gnu.org>."
- exit 0
+ exit $EXIT_SUCCESS
;;
clean)
@@ -6246,6 +6382,8 @@
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
-objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
-release RELEASE specify package release information
-rpath LIBDIR the created library will eventually be installed in LIBDIR
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
@@ -6287,14 +6425,14 @@
*)
$echo "$modename: invalid operation mode \`$mode'" 1>&2
$echo "$help" 1>&2
- exit 1
+ exit $EXIT_FAILURE
;;
esac
$echo
$echo "Try \`$modename --help' for more information about other modes."
-exit 0
+exit $?
# The TAGs below are defined such that we never get into a situation
# in which we disable both kinds of libraries. Given conflicting
Modified: trunk/uim/Makefile.am
===================================================================
--- trunk/uim/Makefile.am 2005-02-21 22:45:09 UTC (rev 694)
+++ trunk/uim/Makefile.am 2005-02-22 02:26:10 UTC (rev 695)
@@ -86,7 +86,7 @@
libuimincludedir = $(includedir)/uim
libuim_la_LDFLAGS = -version-info 0:1:0 -export-symbols-regex uim.\*
-libuim_la_LIBADD = @LIBINTL@ @LIBICONV@
+libuim_la_LIBADD = @LTLIBINTL@ @LTLIBICONV@
libuim_la_CPPFLAGS = $(uim_defs) -I$(top_srcdir) -DPKGLIBDIR=\"$(pkglibdir)\" \
-DPKGDATADIR=\"$(pkgdatadir)\"
@@ -115,10 +115,10 @@
uim_sh_LIBS =
uim_sh_CPPFLAGS = $(uim_defs) -I$(top_srcdir)
uim_sh_CFLAGS =
-uim_sh_LDADD = libuim.la @LIBICONV@
+uim_sh_LDADD = libuim.la
uim_sh_SOURCES = uim-sh.c
noinst_PROGRAMS = uim-agent
uim_agent_SOURCES = agent.c
-uim_agent_LDADD = libuim.la @LIBICONV@
+uim_agent_LDADD = libuim.la
Modified: trunk/xim/Makefile.am
===================================================================
--- trunk/xim/Makefile.am 2005-02-21 22:45:09 UTC (rev 694)
+++ trunk/xim/Makefile.am 2005-02-22 02:26:10 UTC (rev 695)
@@ -2,7 +2,7 @@
bin_PROGRAMS = uim-xim
uim_xim_LDFLAGS = @X_LIBS@
-uim_xim_LDADD = -lXext -lX11 $(top_builddir)/uim/libuim.la @LIBICONV@
+uim_xim_LDADD = -lXext -lX11 $(top_builddir)/uim/libuim.la
uim_xim_CPPFLAGS = -I$(top_srcdir)
uim_xim_CFLAGS = @X_CFLAGS@ -Wall
uim_xim_CXXFLAGS = @X_CFLAGS@ -Wall
More information about the Uim-commit
mailing list