<html> <head> <base href="https://bugs.freedesktop.org/"> </head> <body> <div> <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - Imprecise click" href="https://bugs.freedesktop.org/show_bug.cgi?id=96259#c26">Comment # 26</a> on <a class="bz_bug_link bz_status_NEEDINFO " title="NEEDINFO - Imprecise click" href="https://bugs.freedesktop.org/show_bug.cgi?id=96259">bug 96259</a> from <a class="email" href="mailto:jeremy9856@gmail.com" title="Paviluf <jeremy9856@gmail.com>"> Paviluf</a> <pre>(In reply to Peter Hutterer from <a href="show_bug.cgi?id=96259#c25">comment #25</a>) > quick calculation shows that the zone is 9.6mm + the 2/3mm zone. that makes > it more than 10mm which is bigger than on all other touchpads where we cap > to 10mm. > but now I'm losing track of this bug. What's left to fix? It seem that is more complicated than this. If I move my finger from bottom to top the insensitive zone is about 13mm. Now if I move my finger from top to bottom the insensitive zone is about 5mm. The problem is that when I click I naturally put my finger at about 10mm and the **pressure is from top to bottom**. So I'm in the sensitive zone and the click is imprecise. To not trigger the top to bottom sensitive zone I have to click in this small 5mm insensitive zone that is too small. You may be right, 15mm is maybe a little too big. An about 10mm insensitive top to bottom zone, like it should be it seems, will be good and a much better improvement.</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the assignee for the bug.</li> </ul> </body> </html>