[PATCH 1/2] xdg_shell: Add a new shell protocol.
antognolli at gmail.com
antognolli at gmail.com
Fri Jul 19 12:42:13 PDT 2013
From: Rafael Antognolli <rafael.antognolli at intel.com>
xdg_shell is a protocol aimed to substitute wl_shell in the long term,
but will not be part of the wayland core protocol. It starts as a
non-stable API, aimed to be used as a development place at first, and
once features are defined as required by several desktop shells, we can
finally make it stable.
---
configure.ac | 1 +
protocol/Makefile.am | 3 +
protocol/xdg-surface.xml | 326 ++++++++++++++++++++++++++++++++++++++++++
src/Makefile.am | 2 +-
src/wayland-xdg-surface.pc.in | 10 ++
5 files changed, 341 insertions(+), 1 deletion(-)
create mode 100644 protocol/xdg-surface.xml
create mode 100644 src/wayland-xdg-surface.pc.in
diff --git a/configure.ac b/configure.ac
index 536df9e..61579c8 100644
--- a/configure.ac
+++ b/configure.ac
@@ -141,6 +141,7 @@ AC_CONFIG_FILES([Makefile
src/wayland-server.pc
src/wayland-client.pc
src/wayland-scanner.pc
+ src/wayland-xdg-surface.pc
src/wayland-version.h
protocol/Makefile
tests/Makefile])
diff --git a/protocol/Makefile.am b/protocol/Makefile.am
index 08690b3..69b5363 100644
--- a/protocol/Makefile.am
+++ b/protocol/Makefile.am
@@ -1 +1,4 @@
EXTRA_DIST = wayland.xml
+
+protocoldir = $(datadir)/wayland/protocol
+protocol_DATA = xdg-surface.xml
diff --git a/protocol/xdg-surface.xml b/protocol/xdg-surface.xml
new file mode 100644
index 0000000..de64018
--- /dev/null
+++ b/protocol/xdg-surface.xml
@@ -0,0 +1,326 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="xdg_surface">
+
+ <copyright>
+ Copyright © 2008-2013 Kristian Høgsberg
+ Copyright © 2013 Rafael Antognolli
+ Copyright © 2010-2013 Intel Corporation
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that copyright notice and this permission
+ notice appear in supporting documentation, and that the name of
+ the copyright holders not be used in advertising or publicity
+ pertaining to distribution of the software without specific,
+ written prior permission. The copyright holders make no
+ representations about the suitability of this software for any
+ purpose. It is provided "as is" without express or implied
+ warranty.
+
+ THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
+ THIS SOFTWARE.
+ </copyright>
+
+ <interface name="xdg_shell" version="1">
+ <description summary="create desktop-style surfaces">
+ This interface is implemented by servers that provide
+ desktop-style user interfaces.
+
+ It allows clients to associate a xdg_surface with
+ a basic surface.
+ </description>
+
+ <request name="create_xdg_surface">
+ <description summary="create a shell surface from a surface">
+ Create a shell surface for an existing surface.
+
+ Only one shell surface can be associated with a given surface.
+ </description>
+ <arg name="id" type="new_id" interface="xdg_surface"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ </request>
+ </interface>
+
+ <interface name="xdg_surface" version="1">
+
+ <description summary="desktop-style metadata interface">
+ An interface that may be implemented by a wl_surface, for
+ implementations that provide a desktop-style user interface.
+
+ It provides requests to treat surfaces like toplevel, fullscreen
+ or popup windows, move, resize or maximize them, associate
+ metadata like title and class, etc.
+
+ On the server side the object is automatically destroyed when
+ the related wl_surface is destroyed. On client side,
+ xdg_surface_destroy() must be called before destroying
+ the wl_surface object.
+ </description>
+
+ <request name="pong">
+ <description summary="respond to a ping event">
+ A client must respond to a ping event with a pong request or
+ the client may be deemed unresponsive.
+ </description>
+ <arg name="serial" type="uint" summary="serial of the ping event"/>
+ </request>
+
+ <request name="move">
+ <description summary="start an interactive move">
+ Start a pointer-driven move of the surface.
+
+ This request must be used in response to a button press event.
+ The server may ignore move requests depending on the state of
+ the surface (e.g. fullscreen or maximized).
+ </description>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat whose pointer is used"/>
+ <arg name="serial" type="uint" summary="serial of the implicit grab on the pointer"/>
+ </request>
+
+ <enum name="resize">
+ <description summary="edge values for resizing">
+ These values are used to indicate which edge of a surface
+ is being dragged in a resize operation. The server may
+ use this information to adapt its behavior, e.g. choose
+ an appropriate cursor image.
+ </description>
+ <entry name="none" value="0"/>
+ <entry name="top" value="1"/>
+ <entry name="bottom" value="2"/>
+ <entry name="left" value="4"/>
+ <entry name="top_left" value="5"/>
+ <entry name="bottom_left" value="6"/>
+ <entry name="right" value="8"/>
+ <entry name="top_right" value="9"/>
+ <entry name="bottom_right" value="10"/>
+ </enum>
+
+ <request name="resize">
+ <description summary="start an interactive resize">
+ Start a pointer-driven resizing of the surface.
+
+ This request must be used in response to a button press event.
+ The server may ignore resize requests depending on the state of
+ the surface (e.g. fullscreen or maximized).
+ </description>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat whose pointer is used"/>
+ <arg name="serial" type="uint" summary="serial of the implicit grab on the pointer"/>
+ <arg name="edges" type="uint" summary="which edge or corner is being dragged"/>
+ </request>
+
+ <request name="set_toplevel">
+ <description summary="make the surface a toplevel surface">
+ Map the surface as a toplevel surface.
+
+ A toplevel surface is not fullscreen, maximized or transient.
+ </description>
+ </request>
+
+ <enum name="transient">
+ <description summary="details of transient behaviour">
+ These flags specify details of the expected behaviour
+ of transient surfaces. Used in the set_transient request.
+ </description>
+ <entry name="inactive" value="0x1" summary="do not set keyboard focus"/>
+ </enum>
+
+ <request name="set_transient">
+ <description summary="make the surface a transient surface">
+ Map the surface relative to an existing surface.
+
+ The x and y arguments specify the locations of the upper left
+ corner of the surface relative to the upper left corner of the
+ parent surface, in surface local coordinates.
+
+ The flags argument controls details of the transient behaviour.
+ </description>
+
+ <arg name="parent" type="object" interface="wl_surface"/>
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ <arg name="flags" type="uint"/>
+ </request>
+
+ <enum name="fullscreen_method">
+ <description summary="different method to set the surface fullscreen">
+ Hints to indicate to the compositor how to deal with a conflict
+ between the dimensions of the surface and the dimensions of the
+ output. The compositor is free to ignore this parameter.
+ </description>
+ <entry name="default" value="0" summary="no preference, apply default policy"/>
+ <entry name="scale" value="1" summary="scale, preserve the surface's aspect ratio and center on output"/>
+ <entry name="driver" value="2" summary="switch output mode to the smallest mode that can fit the surface, add black borders to compensate size mismatch"/>
+ <entry name="fill" value="3" summary="no upscaling, center on output and add black borders to compensate size mismatch"/>
+ </enum>
+
+ <request name="set_fullscreen">
+ <description summary="make the surface a fullscreen surface">
+ Map the surface as a fullscreen surface.
+
+ If an output parameter is given then the surface will be made
+ fullscreen on that output. If the client does not specify the
+ output then the compositor will apply its policy - usually
+ choosing the output on which the surface has the biggest surface
+ area.
+
+ The client may specify a method to resolve a size conflict
+ between the output size and the surface size - this is provided
+ through the method parameter.
+
+ The framerate parameter is used only when the method is set
+ to "driver", to indicate the preferred framerate. A value of 0
+ indicates that the app does not care about framerate. The
+ framerate is specified in mHz, that is framerate of 60000 is 60Hz.
+
+ A method of "scale" or "driver" implies a scaling operation of
+ the surface, either via a direct scaling operation or a change of
+ the output mode. This will override any kind of output scaling, so
+ that mapping a surface with a buffer size equal to the mode can
+ fill the screen independent of buffer_scale.
+
+ A method of "fill" means we don't scale up the buffer, however
+ any output scale is applied. This means that you may run into
+ an edge case where the application maps a buffer with the same
+ size of the output mode but buffer_scale 1 (thus making a
+ surface larger than the output). In this case it is allowed to
+ downscale the results to fit the screen.
+
+ The compositor must reply to this request with a configure event
+ with the dimensions for the output on which the surface will
+ be made fullscreen.
+ </description>
+ <arg name="method" type="uint"/>
+ <arg name="framerate" type="uint"/>
+ <arg name="output" type="object" interface="wl_output" allow-null="true"/>
+ </request>
+
+ <request name="set_popup">
+ <description summary="make the surface a popup surface">
+ Map the surface as a popup.
+
+ A popup surface is a transient surface with an added pointer
+ grab.
+
+ An existing implicit grab will be changed to owner-events mode,
+ and the popup grab will continue after the implicit grab ends
+ (i.e. releasing the mouse button does not cause the popup to
+ be unmapped).
+
+ The popup grab continues until the window is destroyed or a
+ mouse button is pressed in any other clients window. A click
+ in any of the clients surfaces is reported as normal, however,
+ clicks in other clients surfaces will be discarded and trigger
+ the callback.
+
+ The x and y arguments specify the locations of the upper left
+ corner of the surface relative to the upper left corner of the
+ parent surface, in surface local coordinates.
+ </description>
+
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat whose pointer is used"/>
+ <arg name="serial" type="uint" summary="serial of the implicit grab on the pointer"/>
+ <arg name="parent" type="object" interface="wl_surface"/>
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ <arg name="flags" type="uint"/>
+ </request>
+
+ <request name="set_maximized">
+ <description summary="make the surface a maximized surface">
+ Map the surface as a maximized surface.
+
+ If an output parameter is given then the surface will be
+ maximized on that output. If the client does not specify the
+ output then the compositor will apply its policy - usually
+ choosing the output on which the surface has the biggest surface
+ area.
+
+ The compositor will reply with a configure event telling
+ the expected new surface size. The operation is completed
+ on the next buffer attach to this surface.
+
+ A maximized surface typically fills the entire output it is
+ bound to, except for desktop element such as panels. This is
+ the main difference between a maximized shell surface and a
+ fullscreen shell surface.
+
+ The details depend on the compositor implementation.
+ </description>
+ <arg name="output" type="object" interface="wl_output" allow-null="true"/>
+ </request>
+
+ <request name="set_title">
+ <description summary="set surface title">
+ Set a short title for the surface.
+
+ This string may be used to identify the surface in a task bar,
+ window list, or other user interface elements provided by the
+ compositor.
+
+ The string must be encoded in UTF-8.
+ </description>
+ <arg name="title" type="string"/>
+ </request>
+
+ <request name="set_class">
+ <description summary="set surface class">
+ Set a class for the surface.
+
+ The surface class identifies the general class of applications
+ to which the surface belongs. A common convention is to use
+ the file name (full path if non-standard location) of the
+ applications .desktop file as the class.
+ </description>
+ <arg name="class_" type="string"/>
+ </request>
+
+ <event name="ping">
+ <description summary="ping client">
+ Ping a client to check if it is receiving events and sending
+ requests. A client is expected to reply with a pong request.
+ </description>
+ <arg name="serial" type="uint"/>
+ </event>
+
+ <event name="configure">
+ <description summary="suggest resize">
+ The configure event asks the client to resize its surface.
+
+ The size is a hint, in the sense that the client is free to
+ ignore it if it doesn't resize, pick a smaller size (to
+ satisfy aspect ratio or resize in steps of NxM pixels).
+
+ The edges parameter provides a hint about how the surface
+ was resized. The client may use this information to decide
+ how to adjust its content to the new size (e.g. a scrolling
+ area might adjust its content position to leave the viewable
+ content unmoved).
+
+ The client is free to dismiss all but the last configure
+ event it received.
+
+ The width and height arguments specify the size of the window
+ in surface local coordinates.
+ </description>
+
+ <arg name="edges" type="uint"/>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ </event>
+
+ <event name="popup_done">
+ <description summary="popup interaction is done">
+ The popup_done event is sent out when a popup grab is broken,
+ that is, when the users clicks a surface that doesn't belong
+ to the client owning the popup surface.
+ </description>
+ </event>
+ </interface>
+</protocol>
diff --git a/src/Makefile.am b/src/Makefile.am
index 4226f63..d8e4254 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -33,7 +33,7 @@ libwayland_client_la_SOURCES = \
wayland-client.c
pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = wayland-client.pc wayland-server.pc
+pkgconfig_DATA = wayland-client.pc wayland-server.pc wayland-xdg-surface.pc
AM_CPPFLAGS = $(FFI_CFLAGS)
AM_CFLAGS = $(GCC_CFLAGS)
diff --git a/src/wayland-xdg-surface.pc.in b/src/wayland-xdg-surface.pc.in
new file mode 100644
index 0000000..a708d53
--- /dev/null
+++ b/src/wayland-xdg-surface.pc.in
@@ -0,0 +1,10 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+datadir=@datadir@
+protocoldir=${datadir}/wayland/protocol/
+
+Name: Wayland XDG Shell
+Description: XDG Shell protocol
+Version: 0.1
--
1.7.11.7
More information about the wayland-devel
mailing list