Request help regarding building of mesa module
gautam.h.kumar at accenture.com
gautam.h.kumar at accenture.com
Tue Aug 12 02:45:22 PDT 2014
Hi Marek,
Thanks for the help again I will do so as advised and revert back with the results.
Thanks again and Br,
Gautam
From: Marek Chalupa [mailto:mchqwerty at gmail.com]
Sent: Tuesday, August 12, 2014 3:12 PM
To: Kumar, Gautam H.
Cc: sri.hebbar at samsung.com; wayland-devel at lists.freedesktop.org
Subject: Re: Request help regarding building of mesa module
On 12 August 2014 11:31, <gautam.h.kumar at accenture.com<mailto:gautam.h.kumar at accenture.com>> wrote:
Hi Marek,
1] I built the drm with the enable intel option as suggested by you
root at ivi-VirtualBox:/source_build/drm# ./autogen.sh --enable-intel
root at ivi-VirtualBox:/source_build/drm# make
root at ivi-VirtualBox:/source_build/drm# make install
root at ivi-VirtualBox:/source_build/drm# cd ..
root at ivi-VirtualBox:/source_build# cd mesa
2] I built the mesa component as given in the http://wayland.freedesktop.org/ubuntu12.04.html
root at ivi-VirtualBox:/source_build/mesa# ./autogen.sh --prefix=$WLD --enable-gles2 --disable-gallium-egl \
> --with-egl-platforms=x11,wayland,drm --enable-gbm --enable-shared-glapi \
> --with-gallium-drivers=r300,r600,swrast,nouveau \
> --disable-llvm-shared-libs # this may be a bug in the llvm package
I am getting the Errors
checking for PRESENTPROTO... yes
checking for XF86VIDMODE... yes
checking for DRIGL... no
configure: error: Package requirements (x11 xext xdamage xfixes x11-xcb xcb-glx >= 1.8.1 xcb-dri2 >= 1.8 xcb-dri3 xcb-present xcb-sync xshmfence >= 1.1 xxf86vm) were not met:
No package 'xcb-dri3' found
No package 'xcb-present' found
No package 'xcb-sync' found
No package 'xshmfence' found
So read the errors! :) Build these packages. These are available from:
http://cgit.freedesktop.org/xcb
http://cgit.freedesktop.org/xorg
Or you can install them from your system's repository, if the version is OK (the -devel ones). Next time you get this message, just
try to find the package on the internet and build it (or the repo thing).
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables DRIGL_CFLAGS
and DRIGL_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
root at ivi-VirtualBox:/source_build/mesa# find / -name "xcb-dri3"
root at ivi-VirtualBox:/source_build/mesa# find / -name "xcb-present"
root at ivi-VirtualBox:/source_build/mesa# find / -name "xcb-sync"
root at ivi-VirtualBox:/source_build/mesa# find / -name "xshmfence"
Thanks and Br,
Gautam
From: Marek Chalupa [mailto:mchqwerty at gmail.com<mailto:mchqwerty at gmail.com>]
Sent: Tuesday, August 12, 2014 1:04 PM
To: Kumar, Gautam H.
Cc: sri.hebbar at samsung.com<mailto:sri.hebbar at samsung.com>; wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
Subject: Re: Request help regarding building of mesa module
On 11 August 2014 17:07, <gautam.h.kumar at accenture.com<mailto:gautam.h.kumar at accenture.com>> wrote:
Hi Marek,
I rebuilt everything from scratch and it went on fine till again it started breaking in the mesa module
git clone git://anongit.freedesktop.org/mesa/mesa<http://anongit.freedesktop.org/mesa/mesa>
cd mesa
./autogen.sh --prefix=$WLD --enable-gles2 --disable-gallium-egl \
--with-egl-platforms=x11,wayland,drm --enable-gbm --enable-shared-glapi \
--with-gallium-drivers=r300,r600,swrast,nouveau \
--disable-llvm-shared-libs # this may be a bug in the llvm package
Error encountered as below
make[5]: Leaving directory `/source_build/mesa/src/mesa/drivers/dri/radeon'
Making all in swrast
make[5]: Entering directory `/source_build/mesa/src/mesa/drivers/dri/swrast'
CC swrast.lo
CCLD libswrast_dri.la<http://libswrast_dri.la>
make[5]: Leaving directory `/source_build/mesa/src/mesa/drivers/dri/swrast'
make[5]: Entering directory `/source_build/mesa/src/mesa/drivers/dri'
CXXLD mesa_dri_drivers.la<http://mesa_dri_drivers.la>
/usr/bin/ld: cannot find -ldrm_intel
You don't have drm compiled with intel KMS API support. Try recompile drm with --enable-intel.
collect2: ld returned 1 exit status
make[5]: *** [mesa_dri_drivers.la<http://mesa_dri_drivers.la>] Error 1
make[5]: Leaving directory `/source_build/mesa/src/mesa/drivers/dri'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/source_build/mesa/src/mesa/drivers/dri'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/source_build/mesa/src/mesa'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/source_build/mesa/src/mesa'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/source_build/mesa/src'
make: *** [all-recursive] Error 1
Any idea about the above ?
Thanks and Br,
Gautam
From: Kumar, Gautam H.
Sent: Monday, August 11, 2014 3:21 PM
To: 'Marek Chalupa'
Cc: sri.hebbar at samsung.com<mailto:sri.hebbar at samsung.com>; wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
Subject: RE: Request help regarding building of the xorg-macros and libxcb
Hi Marek,
As advised by you will redo them all and revert back.
I have learnt a lot while interacting with you all.
Thanks a lot again and Br,
Gautam
From: Marek Chalupa [mailto:mchqwerty at gmail.com]
Sent: Monday, August 11, 2014 3:17 PM
To: Kumar, Gautam H.
Cc: sri.hebbar at samsung.com<mailto:sri.hebbar at samsung.com>; wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
Subject: Re: Request help regarding building of the xorg-macros and libxcb
On 11 August 2014 11:36, <gautam.h.kumar at accenture.com<mailto:gautam.h.kumar at accenture.com>> wrote:
Hi Marek,
Pls find the logs as under as you had told I did the same.
root at ivi-VirtualBox:/source_build# echo $PKG_CONFIG_PATH
root at ivi-VirtualBox:/source_build# export PKG_CONFIG_PATH=$WLD/share/pkgconfig:$PKG_CONFIG_PATH
root at ivi-VirtualBox:/source_build# cd libxcb/
root at ivi-VirtualBox:/source_build/libxcb# ./autogen.sh --prefix=$WLD
autoreconf: Entering directory `.'
autoreconf: configure.ac<http://configure.ac>: not using Gettext
autoreconf: running: aclocal -I m4
configure.ac:29<http://configure.ac:29>: error: xorg-macros version 1.18 or higher is required but 1.17 found
/usr/share/aclocal/xorg-macros.m4:39: XORG_MACROS_VERSION is expanded from...
Apparently, you're using /usr/share/aclocal/xorg-macros.m4 file. Is that the file you installed? What is the $WLD set to? Where are you installing the xorg-macros? Did you set the environment according the instructions on the top of the page? There's:
export WLD=$HOME/install
export LD_LIBRARY_PATH=$WLD/lib
export PKG_CONFIG_PATH=$WLD/lib/pkgconfig/:$WLD/share/pkgconfig/
export PATH=$WLD/bin:$PATH
export ACLOCAL_PATH=$WLD/share/aclocal
export ACLOCAL="aclocal -I $ACLOCAL_PATH"
mkdir -p $ACLOCAL_PATH
It looks like you've skipped this, because you don't have the PKG_CONFIG_PATH set. If you haven't set this till now, do so and recompile all the
packages again.
configure.ac:29<http://configure.ac:29>: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: /usr/bin/autom4te failed with exit status: 1
autoreconf: aclocal failed with exit status: 1
root at ivi-VirtualBox:/source_build/libxcb#
Pls Note: It didn’t show anything when I typed echo $PKG_CONFIG_PATH as in the above case.
Hope not bothering you all much.
Thanks and Br,
Gautam
From: Marek Chalupa [mailto:mchqwerty at gmail.com<mailto:mchqwerty at gmail.com>]
Sent: Monday, August 11, 2014 2:59 PM
To: Kumar, Gautam H.
Cc: sri.hebbar at samsung.com<mailto:sri.hebbar at samsung.com>; wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
Subject: Re: Request help regarding building of the xorg-macros and libxcb
The same way as you find out the contents of the PATH variable, i. e. echo $PKG_CONFIG_PATH
Try
$ export PKG_CONFIG_PATH=$WLD/share/pkgconfig:$PKG_CONFIG_PATH
before building libxcb. You must have $WLD set to the prefix you're installing all the stuff (I suppose you have, because in the first e-mail you used it)
There's nice description here: http://wayland.freedesktop.org/building.html
in the section 'Installing in a custom location'
On 11 August 2014 11:23, <gautam.h.kumar at accenture.com<mailto:gautam.h.kumar at accenture.com>> wrote:
Hi Marek,
Thanks again for the help,
How to set the PKG_CONFIG_PATH to $WLD/share/pkgconfig ?
Or How to check what is my PKG_CONFIG_PATH ?
Sorry may be very silly thing to ask but I am fairly new (Just a month old into linux).
I am also googling on the above ☺
Thanks and Br,
Gautam,
From: Marek Chalupa [mailto:mchqwerty at gmail.com<mailto:mchqwerty at gmail.com>]
Sent: Monday, August 11, 2014 2:46 PM
To: Kumar, Gautam H.
Cc: sri.hebbar at samsung.com<mailto:sri.hebbar at samsung.com>; wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
Subject: Re: Request help regarding building of the xorg-macros and libxcb
Hi,
On 11 August 2014 11:00, <gautam.h.kumar at accenture.com<mailto:gautam.h.kumar at accenture.com>> wrote:
Hi Hebbar,
Thanks for the quick help,
Pls find the logs when I tried to install macros as under
root at ivi-VirtualBox:/source_build/macros# make && make install
make: Nothing to be done for `all'.
make[1]: Entering directory `/source_build/macros'
make[1]: Nothing to be done for `install-exec-am'.
test -z "/share/aclocal" || /bin/mkdir -p "/share/aclocal"
/usr/bin/install -c -m 644 xorg-macros.m4 '/share/aclocal'
test -z "/share/util-macros" || /bin/mkdir -p "/share/util-macros"
/usr/bin/install -c -m 644 INSTALL '/share/util-macros'
test -z "/share/pkgconfig" || /bin/mkdir -p "/share/pkgconfig"
/usr/bin/install -c -m 644 xorg-macros.pc '/share/pkgconfig'
/usr/bin/make install-data-hook
make[2]: Entering directory `/source_build/macros'
rm -f /share/aclocal/xorgversion.m4
make[2]: Leaving directory `/source_build/macros'
make[1]: Leaving directory `/source_build/macros'
As for the PATH mine it is set as under
root at ivi-VirtualBox:/source_build/macros# echo $PATH
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Do you have PKG_CONFIG_PATH set to $WLD/share/pkgconfig?
Mine macros libraries are installed as under
root at ivi-VirtualBox:/source_build/macros# find / -name "*macro*.pc"
/source_build/util-macros-1.19.0/xorg-macros.pc
/source_build/macros/xorg-macros.pc
/usr/local/share/pkgconfig/xorg-macros.pc
/usr/share/pkgconfig/xorg-macros.pc
/usr/lib/pkgconfig/xorg-macros.pc
/share/pkgconfig/xorg-macros.pc
root at ivi-VirtualBox:/source_build/macros#
Hope these are the parameter’s you were asking
Thanks and br,
Gautam
From: Srivardhan [mailto:sri.hebbar at samsung.com<mailto:sri.hebbar at samsung.com>]
Sent: Monday, August 11, 2014 2:05 PM
To: Kumar, Gautam H.; wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
Subject: RE: Request help regarding building of the xorg-macros and libxcb
Hi,
From: wayland-devel [mailto:wayland-devel-bounces at lists.freedesktop.org] On Behalf Of gautam.h.kumar at accenture.com<mailto:gautam.h.kumar at accenture.com>
Sent: Monday, August 11, 2014 12:53 PM
To: wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
Subject: Request help regarding building of the xorg-macros and libxcb
Hello All,
I was trying to build Weston according to the instructions given at http://wayland.freedesktop.org/ubuntu12.04.html
1. I built xorg-macros according to the given instructions as below
git clone http://anongit.freedesktop.org/git/xorg/util/macros.git
cd macros
./autogen.sh --prefix=$WLD
make && make install
cd ..
2. When I am trying to build libxcb as in next step given as below
git clone http://anongit.freedesktop.org/git/xcb/libxcb.git
cd libxcb
./autogen.sh --prefix=$WLD
make && make install
cd ..
3. I am getting below error in the “./autogen.sh --prefix=$WLD” step
4.
root at ivi-VirtualBox:/source_build/libxcb# ./autogen.sh --prefix=$WLD
autoreconf: Entering directory `.'
autoreconf: configure.ac<http://configure.ac>: not using Gettext
autoreconf: running: aclocal -I m4
configure.ac:29<http://configure.ac:29>: error: xorg-macros version 1.18 or higher is required but 1.17 found
/usr/share/aclocal/xorg-macros.m4:39: XORG_MACROS_VERSION is expanded from...
This error comes when macros is not installed. You sure, you didn’t get any error while building or installing. Have you set the PATH and PKG_CONFIG_PATH variable correctly?
Thank-you,
Hebbar
configure.ac:29<http://configure.ac:29>: the top level
autom4te: /usr/bin/m4 failed with exit status: 1
aclocal: /usr/bin/autom4te failed with exit status: 1
autoreconf: aclocal failed with exit status: 1
Though everywhere I am checking macros 1.19 I am installing, Can somebody help me would be highly obliged.
Got stuck badly here ☹☹
Thanks and Br,
Gautam,
________________________________
This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy.
______________________________________________________________________________________
www.accenture.com<http://www.accenture.com>
_______________________________________________
wayland-devel mailing list
wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
http://lists.freedesktop.org/mailman/listinfo/wayland-devel
Cheers,
Marek
_______________________________________________
wayland-devel mailing list
wayland-devel at lists.freedesktop.org<mailto:wayland-devel at lists.freedesktop.org>
http://lists.freedesktop.org/mailman/listinfo/wayland-devel
Cheers,
Marek
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/wayland-devel/attachments/20140812/f667a5b7/attachment-0001.html>
More information about the wayland-devel
mailing list