[PATCH libinput 2/2] Document the static udev configuration options we support

[Peter Hutterer]

Signed-off-by: Peter Hutterer <peter.hutterer at who-t.net>
---
 src/libinput.h | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/src/libinput.h b/src/libinput.h
index 7fde65f..a0e5d4c 100644
--- a/src/libinput.h
+++ b/src/libinput.h
@@ -104,6 +104,38 @@ extern "C" {
  */
 
 /**
+ * @page udev_config Static device configuration via udev
+ *
+ * libinput supports some static configuration through udev properties.
+ * These propertiesare read when the device is initially added
+ * to libinput's device list, i.e. before the @ref
+ * LIBINPUT_EVENT_DEVICE_ADDED event is generated.
+ *
+ * The following udev properties are supported:
+ * <dl>
+ * <dt>LIBINPUT_CALIBRATION_MATRIX</dt>
+ * <dd>Sets the calibration matrix, see
+ * libinput_device_config_calibration_get_default_matrix(). If unset,
+ * defaults to the unity matrix.</dd>
+ * <dt>ID_SEAT</dt>
+ * <dd>Assigns the physical seat for this device. See
+ * libinput_seat_get_physical_name(). Defaults to "seat0".</dd>
+ * <dt>WL_SEAT</dt>
+ * <dd>Assigns the logical seat for this device. See
+ * libinput_seat_get_logical_name()
+ * context. Defaults to "default".</dd>
+ * </dl>
+ *
+ * Below is an example udev rule to assign "seat1" to a device from vendor
+ * 0x012a with the model ID of 0x034b.
+ * @code
+ * ACTION=="add|change", KERNEL=="event[0-9]*", ENV{ID_VENDOR_ID}=="012a", \
+ * ENV{ID_MODEL_ID}=="034b", ENV{ID_SEAT}="seat1"
+ * @endcode
+ *
+ */
+
+/**
  * Log priority for internal logging messages.
  */
 enum libinput_log_priority {
-- 
1.9.3