[PATCH libinput v5] evdev: use a different filter for low resolution touchpad on the Lenovo X230
Vasily Khoruzhick
anarsoul at gmail.com
Sun Apr 26 13:40:54 PDT 2015
Hi Benjamin,
This one works well on my x230.
Have my:
Tested-by: Vasily Khoruzhick <anarsoul at gmail.com>
Regards,
Vasily
On Thu, Apr 23, 2015 at 9:32 PM, Benjamin Tissoires
<benjamin.tissoires at gmail.com> wrote:
> Those touchpads presents an actual lower resolution that what is
> advertised.
>
> We see some jumps from the cursor due to the big steps in X and Y
> when we are receiving data.
>
> For instance, we receive:
>
> E: 13.471932 0003 0000 16366 # EV_ABS / ABS_X 16366
> E: 13.471932 0003 0001 9591 # EV_ABS / ABS_Y 9591
> E: 13.471932 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
> E: 13.479924 0003 0000 16316 # EV_ABS / ABS_X 16316
> E: 13.479924 0003 0001 9491 # EV_ABS / ABS_Y 9491
> E: 13.479924 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
> E: 13.487939 0003 0000 16271 # EV_ABS / ABS_X 16271
> E: 13.487939 0003 0001 9403 # EV_ABS / ABS_Y 9403
> E: 13.487939 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
>
> -> jumps of ~50 in X in each report, and ~100 for Y.
>
> Apply a factor to minimize those jumps at low speed, and try
> keeping the same feeling as regular touchpads at high speed.
> It still feels slower but it is usable at least
>
> Signed-off-by: Benjamin Tissoires <benjamin.tissoires at gmail.com>
> ---
>
> Hi,
>
> So this will hopefully be validated and pulled upstream.
> This patch needs the one Peter sent out yesterday (evdev: add support for
> LIBINPUT_MODEL_* udev tags). It is thus much smaller given that the generic
> bits are in the other patch.
>
> The final choice for the acceleration profile is the one I sent in the v1 of
> the series. A nice drawing of the acceleration profile is available here:
> http://people.freedesktop.org/~tissoire/x230-v5.png
>
> If anybody wants to polish it, I am all for it.
>
> Some special notes if you want to use the patch without rebooting:
> - do not forget to update the hwdb (sudo udevadm hwdb --update)
> - reload the udev rules (sudo udevadm control --reload)
> - and trigger the input nodes (sudo udevadm trigger /dev/input/event*)
> - the udev database should still show LIBINPUT_MODEL_LENOVO_X230 attached to the
> touchpad node (udevadm info --export-db | less)
>
> Then kill X (or restart gdm), and you are good.
>
> Cheers,
> Benjamin
>
> src/evdev-mt-touchpad.c | 14 ++++++++++--
> src/evdev.c | 1 +
> src/evdev.h | 1 +
> src/filter.c | 37 ++++++++++++++++++++++++++++++++++++
> src/filter.h | 5 ++++
> udev/90-libinput-model-quirks.hwdb | 8 +++++++
> 6 files changed, 63 insertions(+), 3 deletions(-)
>
> diff --git a/src/evdev-mt-touchpad.c b/src/evdev-mt-touchpad.c
> index cccf033..d5ce880 100644
> --- a/src/evdev-mt-touchpad.c
> +++ b/src/evdev-mt-touchpad.c
> @@ -998,6 +998,7 @@ static int
> tp_init_accel(struct tp_dispatch *tp, double diagonal)
> {
> int res_x, res_y;
> + accel_profile_func_t profile;
>
> res_x = tp->device->abs.absinfo_x->resolution;
> res_y = tp->device->abs.absinfo_y->resolution;
> @@ -1021,9 +1022,16 @@ tp_init_accel(struct tp_dispatch *tp, double diagonal)
> tp->accel.y_scale_coeff = DEFAULT_ACCEL_NUMERATOR / diagonal;
> }
>
> - if (evdev_device_init_pointer_acceleration(
> - tp->device,
> - touchpad_accel_profile_linear) == -1)
> + switch (tp->device->model) {
> + case EVDEV_MODEL_LENOVO_X230:
> + profile = touchpad_lenovo_x230_accel_profile;
> + break;
> + default:
> + profile = touchpad_accel_profile_linear;
> + break;
> + }
> +
> + if (evdev_device_init_pointer_acceleration(tp->device, profile) == -1)
> return -1;
>
> return 0;
> diff --git a/src/evdev.c b/src/evdev.c
> index e3bba93..6a9df49 100644
> --- a/src/evdev.c
> +++ b/src/evdev.c
> @@ -1429,6 +1429,7 @@ evdev_read_model(struct evdev_device *device)
> const char *property;
> enum evdev_device_model model;
> } model_map[] = {
> + { "LIBINPUT_MODEL_LENOVO_X230", EVDEV_MODEL_LENOVO_X230 },
> { NULL, EVDEV_MODEL_DEFAULT },
> };
> const struct model_map *m = model_map;
> diff --git a/src/evdev.h b/src/evdev.h
> index edd4011..151d103 100644
> --- a/src/evdev.h
> +++ b/src/evdev.h
> @@ -95,6 +95,7 @@ enum evdev_middlebutton_event {
>
> enum evdev_device_model {
> EVDEV_MODEL_DEFAULT,
> + EVDEV_MODEL_LENOVO_X230,
> };
>
> struct mt_slot {
> diff --git a/src/filter.c b/src/filter.c
> index 962d74d..b953bee 100644
> --- a/src/filter.c
> +++ b/src/filter.c
> @@ -345,3 +345,40 @@ touchpad_accel_profile_linear(struct motion_filter *filter,
>
> return speed_out * TP_MAGIC_SLOWDOWN;
> }
> +
> +double
> +touchpad_lenovo_x230_accel_profile(struct motion_filter *filter,
> + void *data,
> + double speed_in,
> + uint64_t time)
> +{
> + /* Keep the magic factor from touchpad_accel_profile_linear. */
> + const double TP_MAGIC_SLOWDOWN = 0.4;
> +
> + /* Those touchpads presents an actual lower resolution that what is
> + * advertised. We see some jumps from the cursor due to the big steps
> + * in X and Y when we are receiving data.
> + * Apply a factor to minimize those jumps at low speed, and try
> + * keeping the same feeling as regular touchpads at high speed.
> + * It still feels slower but it is usable at least */
> + const double TP_MAGIC_LOW_RES_FACTOR = 4.0;
> + double speed_out;
> + struct pointer_accelerator *accel_filter =
> + (struct pointer_accelerator *)filter;
> +
> + double s1, s2;
> + const double max_accel = accel_filter->accel *
> + TP_MAGIC_LOW_RES_FACTOR; /* unitless factor */
> + const double threshold = accel_filter->threshold /
> + TP_MAGIC_LOW_RES_FACTOR; /* units/ms */
> + const double incline = accel_filter->incline * TP_MAGIC_LOW_RES_FACTOR;
> +
> + speed_in *= TP_MAGIC_SLOWDOWN / TP_MAGIC_LOW_RES_FACTOR;
> +
> + s1 = min(1, speed_in * 5);
> + s2 = 1 + (speed_in - threshold) * incline;
> +
> + speed_out = min(max_accel, s2 > 1 ? s2 : s1);
> +
> + return speed_out * TP_MAGIC_SLOWDOWN / TP_MAGIC_LOW_RES_FACTOR;
> +}
> diff --git a/src/filter.h b/src/filter.h
> index 70363a6..a053860 100644
> --- a/src/filter.h
> +++ b/src/filter.h
> @@ -67,4 +67,9 @@ touchpad_accel_profile_linear(struct motion_filter *filter,
> void *data,
> double speed_in,
> uint64_t time);
> +double
> +touchpad_lenovo_x230_accel_profile(struct motion_filter *filter,
> + void *data,
> + double speed_in,
> + uint64_t time);
> #endif /* FILTER_H */
> diff --git a/udev/90-libinput-model-quirks.hwdb b/udev/90-libinput-model-quirks.hwdb
> index 02bb8f9..959be0f 100644
> --- a/udev/90-libinput-model-quirks.hwdb
> +++ b/udev/90-libinput-model-quirks.hwdb
> @@ -14,3 +14,11 @@
>
> #
> # Sort by brand, model
> +
> +##########################################
> +# LENOVO
> +##########################################
> +
> +# X230 (Tablet)
> +libinput:name:SynPS/2 Synaptics TouchPad:dmi:*svnLENOVO:*:pvrThinkPadX230*
> + LIBINPUT_MODEL_LENOVO_X230=1
> --
> 1.7.1
>
> _______________________________________________
> wayland-devel mailing list
> wayland-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/wayland-devel
More information about the wayland-devel
mailing list