[PATCH 1/2] xdg-shell: Bump unstable version to 6

Jonas Ådahl jadahl at gmail.com
Wed Dec 2 18:37:04 PST 2015


On Wed, Dec 02, 2015 at 06:31:48PM -0800, Jasper St. Pierre wrote:
> While we're doing this, can we remove the use_unstable_version request?

Good point. Will send a patch.


Jonas

> 
> On Wed, Dec 2, 2015 at 5:06 PM, Mike Blumenkrantz <zmike at samsung.com> wrote:
> > This copies the version 5 of the XML to a new version 6 version, while
> > at the same time the interface names are changed to use the unstable
> > naming convention.
> >
> > A whitespace cleanup was done as no git-blame:ability would be lost
> > anyway.
> >
> > Reviewed-by: Mike Blumenkrantz <zmike at osg.samsung.com>
> > Signed-off-by: Jonas Ådahl <jadahl at gmail.com>
> > ---
> >  Makefile.am                                  |   1 +
> >  unstable/xdg-shell/xdg-shell-unstable-v6.xml | 624 +++++++++++++++++++++++++++
> >  2 files changed, 625 insertions(+)
> >  create mode 100644 unstable/xdg-shell/xdg-shell-unstable-v6.xml
> >
> > diff --git a/Makefile.am b/Makefile.am
> > index 5926a41..4a2974d 100644
> > --- a/Makefile.am
> > +++ b/Makefile.am
> > @@ -5,6 +5,7 @@ unstable_protocols =                                                            \
> >         unstable/text-input/text-input-unstable-v1.xml                          \
> >         unstable/input-method/input-method-unstable-v1.xml                      \
> >         unstable/xdg-shell/xdg-shell-unstable-v5.xml                            \
> > +       unstable/xdg-shell/xdg-shell-unstable-v6.xml                            \
> >         $(NULL)
> >
> >  nobase_dist_pkgdata_DATA =                                                     \
> > diff --git a/unstable/xdg-shell/xdg-shell-unstable-v6.xml b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
> > new file mode 100644
> > index 0000000..196c332
> > --- /dev/null
> > +++ b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
> > @@ -0,0 +1,624 @@
> > +<?xml version="1.0" encoding="UTF-8"?>
> > +<protocol name="xdg_shell_unstable_v6">
> > +
> > +  <copyright>
> > +    Copyright © 2008-2013 Kristian Høgsberg
> > +    Copyright © 2013      Rafael Antognolli
> > +    Copyright © 2013      Jasper St. Pierre
> > +    Copyright © 2010-2013 Intel Corporation
> > +
> > +    Permission is hereby granted, free of charge, to any person obtaining a
> > +    copy of this software and associated documentation files (the "Software"),
> > +    to deal in the Software without restriction, including without limitation
> > +    the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > +    and/or sell copies of the Software, and to permit persons to whom the
> > +    Software is furnished to do so, subject to the following conditions:
> > +
> > +    The above copyright notice and this permission notice (including the next
> > +    paragraph) shall be included in all copies or substantial portions of the
> > +    Software.
> > +
> > +    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > +    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > +    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> > +    THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > +    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > +    FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> > +    DEALINGS IN THE SOFTWARE.
> > +  </copyright>
> > +
> > +  <interface name="zxdg_shell_v6" version="1">
> > +    <description summary="create desktop-style surfaces">
> > +      xdg_shell allows clients to turn a wl_surface into a "real window"
> > +      which can be dragged, resized, stacked, and moved around by the
> > +      user. Everything about this interface is suited towards traditional
> > +      desktop environments.
> > +    </description>
> > +
> > +    <enum name="version">
> > +      <description summary="latest protocol version">
> > +       The 'current' member of this enum gives the version of the
> > +       protocol.  Implementations can compare this to the version
> > +       they implement using static_assert to ensure the protocol and
> > +       implementation versions match.
> > +      </description>
> > +      <entry name="current" value="5" summary="Always the latest version"/>
> > +    </enum>
> > +
> > +    <enum name="error">
> > +      <entry name="role" value="0" summary="given wl_surface has another role"/>
> > +      <entry name="defunct_surfaces" value="1" summary="xdg_shell was destroyed before children"/>
> > +      <entry name="not_the_topmost_popup" value="2" summary="the client tried to map or destroy a non-topmost popup"/>
> > +      <entry name="invalid_popup_parent" value="3" summary="the client specified an invalid popup parent surface"/>
> > +    </enum>
> > +
> > +    <request name="destroy" type="destructor">
> > +      <description summary="destroy xdg_shell">
> > +       Destroy this xdg_shell object.
> > +
> > +       Destroying a bound xdg_shell object while there are surfaces
> > +       still alive created by this xdg_shell object instance is illegal
> > +       and will result in a protocol error.
> > +      </description>
> > +    </request>
> > +
> > +    <request name="use_unstable_version">
> > +      <description summary="enable use of this unstable version">
> > +       Negotiate the unstable version of the interface.  This
> > +       mechanism is in place to ensure client and server agree on the
> > +       unstable versions of the protocol that they speak or exit
> > +       cleanly if they don't agree.  This request will go away once
> > +       the xdg-shell protocol is stable.
> > +      </description>
> > +      <arg name="version" type="int"/>
> > +    </request>
> > +
> > +    <request name="get_xdg_surface">
> > +      <description summary="create a shell surface from a surface">
> > +       This creates an xdg_surface for the given surface and gives it the
> > +       xdg_surface role. A wl_surface can only be given an xdg_surface role
> > +       once. If get_xdg_surface is called with a wl_surface that already has
> > +       an active xdg_surface associated with it, or if it had any other role,
> > +       an error is raised.
> > +
> > +       See the documentation of xdg_surface for more details about what an
> > +       xdg_surface is and how it is used.
> > +      </description>
> > +      <arg name="id" type="new_id" interface="xdg_surface"/>
> > +      <arg name="surface" type="object" interface="wl_surface"/>
> > +    </request>
> > +
> > +    <request name="get_xdg_popup">
> > +      <description summary="create a popup for a surface">
> > +       This creates an xdg_popup for the given surface and gives it the
> > +       xdg_popup role. A wl_surface can only be given an xdg_popup role
> > +       once. If get_xdg_popup is called with a wl_surface that already has
> > +       an active xdg_popup associated with it, or if it had any other role,
> > +       an error is raised.
> > +
> > +       This request must be used in response to some sort of user action
> > +       like a button press, key press, or touch down event.
> > +
> > +       See the documentation of xdg_popup for more details about what an
> > +       xdg_popup is and how it is used.
> > +      </description>
> > +      <arg name="id" type="new_id" interface="xdg_popup"/>
> > +      <arg name="surface" type="object" interface="wl_surface"/>
> > +      <arg name="parent" type="object" interface="wl_surface"/>
> > +      <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > +      <arg name="serial" type="uint" summary="the serial of the user event"/>
> > +      <arg name="x" type="int"/>
> > +      <arg name="y" type="int"/>
> > +    </request>
> > +
> > +    <event name="ping">
> > +      <description summary="check if the client is alive">
> > +       The ping event asks the client if it's still alive. Pass the
> > +       serial specified in the event back to the compositor by sending
> > +       a "pong" request back with the specified serial.
> > +
> > +       Compositors can use this to determine if the client is still
> > +       alive. It's unspecified what will happen if the client doesn't
> > +       respond to the ping request, or in what timeframe. Clients should
> > +       try to respond in a reasonable amount of time.
> > +
> > +       A compositor is free to ping in any way it wants, but a client must
> > +       always respond to any xdg_shell object it created.
> > +      </description>
> > +      <arg name="serial" type="uint" summary="pass this to the pong request"/>
> > +    </event>
> > +
> > +    <request name="pong">
> > +      <description summary="respond to a ping event">
> > +       A client must respond to a ping event with a pong request or
> > +       the client may be deemed unresponsive.
> > +      </description>
> > +      <arg name="serial" type="uint" summary="serial of the ping event"/>
> > +    </request>
> > +  </interface>
> > +
> > +  <interface name="zxdg_surface_v6" version="1">
> > +    <description summary="A desktop window">
> > +      An interface that may be implemented by a wl_surface, for
> > +      implementations that provide a desktop-style user interface.
> > +
> > +      It provides requests to treat surfaces like windows, allowing to set
> > +      properties like maximized, fullscreen, minimized, and to move and resize
> > +      them, and associate metadata like title and app id.
> > +
> > +      The client must call wl_surface.commit on the corresponding wl_surface
> > +      for the xdg_surface state to take effect. Prior to committing the new
> > +      state, it can set up initial configuration, such as maximizing or setting
> > +      a window geometry.
> > +
> > +      Even without attaching a buffer the compositor must respond to initial
> > +      committed configuration, for instance sending a configure event with
> > +      expected window geometry if the client maximized its surface during
> > +      initialization.
> > +
> > +      For a surface to be mapped by the compositor the client must have
> > +      committed both an xdg_surface state and a buffer.
> > +    </description>
> > +
> > +    <request name="destroy" type="destructor">
> > +      <description summary="Destroy the xdg_surface">
> > +       Unmap and destroy the window. The window will be effectively
> > +       hidden from the user's point of view, and all state like
> > +       maximization, fullscreen, and so on, will be lost.
> > +      </description>
> > +    </request>
> > +
> > +    <request name="set_parent">
> > +      <description summary="set the parent of this surface">
> > +       Set the "parent" of this surface. This window should be stacked
> > +       above a parent. The parent surface must be mapped as long as this
> > +       surface is mapped.
> > +
> > +       Parent windows should be set on dialogs, toolboxes, or other
> > +       "auxiliary" surfaces, so that the parent is raised when the dialog
> > +       is raised.
> > +      </description>
> > +      <arg name="parent" type="object" interface="xdg_surface" allow-null="true"/>
> > +    </request>
> > +
> > +    <request name="set_title">
> > +      <description summary="set surface title">
> > +       Set a short title for the surface.
> > +
> > +       This string may be used to identify the surface in a task bar,
> > +       window list, or other user interface elements provided by the
> > +       compositor.
> > +
> > +       The string must be encoded in UTF-8.
> > +      </description>
> > +      <arg name="title" type="string"/>
> > +    </request>
> > +
> > +    <request name="set_app_id">
> > +      <description summary="set application ID">
> > +       Set an application identifier for the surface.
> > +
> > +       The app ID identifies the general class of applications to which
> > +       the surface belongs. The compositor can use this to group multiple
> > +       surfaces together, or to determine how to launch a new application.
> > +
> > +       For D-Bus activatable applications, the app ID is used as the D-Bus
> > +       service name.
> > +
> > +       The compositor shell will try to group application surfaces together
> > +       by their app ID.  As a best practice, it is suggested to select app
> > +       ID's that match the basename of the application's .desktop file.
> > +       For example, "org.freedesktop.FooViewer" where the .desktop file is
> > +       "org.freedesktop.FooViewer.desktop".
> > +
> > +       See the desktop-entry specification [0] for more details on
> > +       application identifiers and how they relate to well-known D-Bus
> > +       names and .desktop files.
> > +
> > +       [0] http://standards.freedesktop.org/desktop-entry-spec/
> > +      </description>
> > +      <arg name="app_id" type="string"/>
> > +    </request>
> > +
> > +    <request name="show_window_menu">
> > +      <description summary="show the window menu">
> > +       Clients implementing client-side decorations might want to show
> > +       a context menu when right-clicking on the decorations, giving the
> > +       user a menu that they can use to maximize or minimize the window.
> > +
> > +       This request asks the compositor to pop up such a window menu at
> > +       the given position, relative to the local surface coordinates of
> > +       the parent surface. There are no guarantees as to what menu items
> > +       the window menu contains.
> > +
> > +       This request must be used in response to some sort of user action
> > +       like a button press, key press, or touch down event.
> > +      </description>
> > +
> > +      <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > +      <arg name="serial" type="uint" summary="the serial of the user event"/>
> > +      <arg name="x" type="int" summary="the x position to pop up the window menu at"/>
> > +      <arg name="y" type="int" summary="the y position to pop up the window menu at"/>
> > +    </request>
> > +
> > +    <request name="move">
> > +      <description summary="start an interactive move">
> > +       Start an interactive, user-driven move of the surface.
> > +
> > +       This request must be used in response to some sort of user action
> > +       like a button press, key press, or touch down event. The passed
> > +       serial is used to determine the type of interactive move (touch,
> > +       pointer, etc).
> > +
> > +       The server may ignore move requests depending on the state of
> > +       the surface (e.g. fullscreen or maximized), or if the passed serial
> > +       is no longer valid.
> > +
> > +       If triggered, the surface will lose the focus of the device
> > +       (wl_pointer, wl_touch, etc) used for the move. It is up to the
> > +       compositor to visually indicate that the move is taking place, such as
> > +       updating a pointer cursor, during the move. There is no guarantee
> > +       that the device focus will return when the move is completed.
> > +      </description>
> > +      <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > +      <arg name="serial" type="uint" summary="the serial of the user event"/>
> > +    </request>
> > +
> > +    <enum name="resize_edge">
> > +      <description summary="edge values for resizing">
> > +       These values are used to indicate which edge of a surface
> > +       is being dragged in a resize operation.
> > +      </description>
> > +      <entry name="none" value="0"/>
> > +      <entry name="top" value="1"/>
> > +      <entry name="bottom" value="2"/>
> > +      <entry name="left" value="4"/>
> > +      <entry name="top_left" value="5"/>
> > +      <entry name="bottom_left" value="6"/>
> > +      <entry name="right" value="8"/>
> > +      <entry name="top_right" value="9"/>
> > +      <entry name="bottom_right" value="10"/>
> > +    </enum>
> > +
> > +    <request name="resize">
> > +      <description summary="start an interactive resize">
> > +       Start a user-driven, interactive resize of the surface.
> > +
> > +       This request must be used in response to some sort of user action
> > +       like a button press, key press, or touch down event. The passed
> > +       serial is used to determine the type of interactive resize (touch,
> > +       pointer, etc).
> > +
> > +       The server may ignore resize requests depending on the state of
> > +       the surface (e.g. fullscreen or maximized).
> > +
> > +       If triggered, the client will receive configure events with the
> > +       "resize" state enum value and the expected sizes. See the "resize"
> > +       enum value for more details about what is required. The client
> > +       must also acknowledge configure events using "ack_configure". After
> > +       the resize is completed, the client will receive another "configure"
> > +       event without the resize state.
> > +
> > +       If triggered, the surface also will lose the focus of the device
> > +       (wl_pointer, wl_touch, etc) used for the resize. It is up to the
> > +       compositor to visually indicate that the resize is taking place,
> > +       such as updating a pointer cursor, during the resize. There is no
> > +       guarantee that the device focus will return when the resize is
> > +       completed.
> > +
> > +       The edges parameter specifies how the surface should be resized,
> > +       and is one of the values of the resize_edge enum. The compositor
> > +       may use this information to update the surface position for
> > +       example when dragging the top left corner. The compositor may also
> > +       use this information to adapt its behavior, e.g. choose an
> > +       appropriate cursor image.
> > +      </description>
> > +      <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > +      <arg name="serial" type="uint" summary="the serial of the user event"/>
> > +      <arg name="edges" type="uint" summary="which edge or corner is being dragged"/>
> > +    </request>
> > +
> > +    <enum name="state">
> > +      <description summary="types of state on the surface">
> > +       The different state values used on the surface. This is designed for
> > +       state values like maximized, fullscreen. It is paired with the
> > +       configure event to ensure that both the client and the compositor
> > +       setting the state can be synchronized.
> > +
> > +       States set in this way are double-buffered. They will get applied on
> > +       the next commit.
> > +
> > +       Desktop environments may extend this enum by taking up a range of
> > +       values and documenting the range they chose in this description.
> > +       They are not required to document the values for the range that they
> > +       chose. Ideally, any good extensions from a desktop environment should
> > +       make its way into standardization into this enum.
> > +
> > +       The current reserved ranges are:
> > +
> > +       0x0000 - 0x0FFF: xdg-shell core values, documented below.
> > +       0x1000 - 0x1FFF: GNOME
> > +      </description>
> > +      <entry name="maximized" value="1" summary="the surface is maximized">
> > +       <description summary="the surface is maximized">
> > +         The surface is maximized. The window geometry specified in the configure
> > +         event must be obeyed by the client.
> > +       </description>
> > +      </entry>
> > +      <entry name="fullscreen" value="2" summary="the surface is fullscreen">
> > +       <description summary="the surface is fullscreen">
> > +         The surface is fullscreen. The window geometry specified in the configure
> > +         event must be obeyed by the client.
> > +       </description>
> > +      </entry>
> > +      <entry name="resizing" value="3" summary="the surface is being resized">
> > +       <description summary="the surface is being resized">
> > +         The surface is being resized. The window geometry specified in the
> > +         configure event is a maximum; the client cannot resize beyond it.
> > +         Clients that have aspect ratio or cell sizing configuration can use
> > +         a smaller size, however.
> > +       </description>
> > +      </entry>
> > +      <entry name="activated" value="4" summary="the surface is now activated">
> > +       <description summary="the surface is now activated">
> > +         Client window decorations should be painted as if the window is
> > +         active. Do not assume this means that the window actually has
> > +         keyboard or pointer focus.
> > +       </description>
> > +      </entry>
> > +    </enum>
> > +
> > +    <event name="configure">
> > +      <description summary="suggest a surface change">
> > +       The configure event asks the client to resize its surface or to
> > +       change its state.
> > +
> > +       The width and height arguments specify a hint to the window
> > +       about how its surface should be resized in window geometry
> > +       coordinates. See set_window_geometry.
> > +
> > +       If the width or height arguments are zero, it means the client
> > +       should decide its own window dimension. This may happen when the
> > +       compositor need to configure the state of the surface but doesn't
> > +       have any information about any previous or expected dimension.
> > +
> > +       The states listed in the event specify how the width/height
> > +       arguments should be interpreted, and possibly how it should be
> > +       drawn.
> > +
> > +       Clients should arrange their surface for the new size and
> > +       states, and then send a ack_configure request with the serial
> > +       sent in this configure event at some point before committing
> > +       the new surface.
> > +
> > +       If the client receives multiple configure events before it
> > +       can respond to one, it is free to discard all but the last
> > +       event it received.
> > +      </description>
> > +
> > +      <arg name="width" type="int"/>
> > +      <arg name="height" type="int"/>
> > +      <arg name="states" type="array"/>
> > +      <arg name="serial" type="uint"/>
> > +    </event>
> > +
> > +    <request name="ack_configure">
> > +      <description summary="ack a configure event">
> > +       When a configure event is received, if a client commits the
> > +       surface in response to the configure event, then the client
> > +       must make an ack_configure request sometime before the commit
> > +       request, passing along the serial of the configure event.
> > +
> > +       For instance, the compositor might use this information to move
> > +       a surface to the top left only when the client has drawn itself
> > +       for the maximized or fullscreen state.
> > +
> > +       If the client receives multiple configure events before it
> > +       can respond to one, it only has to ack the last configure event.
> > +
> > +       A client is not required to commit immediately after sending
> > +       an ack_configure request - it may even ack_configure several times
> > +       before its next surface commit.
> > +
> > +       The compositor expects that the most recently received
> > +       ack_configure request at the time of a commit indicates which
> > +       configure event the client is responding to.
> > +      </description>
> > +      <arg name="serial" type="uint" summary="the serial from the configure event"/>
> > +    </request>
> > +
> > +    <request name="set_window_geometry">
> > +      <description summary="set the new window geometry">
> > +       The window geometry of a window is its "visible bounds" from the
> > +       user's perspective. Client-side decorations often have invisible
> > +       portions like drop-shadows which should be ignored for the
> > +       purposes of aligning, placing and constraining windows.
> > +
> > +       The window geometry is double buffered, and will be applied at the
> > +       time wl_surface.commit of the corresponding wl_surface is called.
> > +
> > +       Once the window geometry of the surface is set once, it is not
> > +       possible to unset it, and it will remain the same until
> > +       set_window_geometry is called again, even if a new subsurface or
> > +       buffer is attached.
> > +
> > +       If never set, the value is the full bounds of the surface,
> > +       including any subsurfaces. This updates dynamically on every
> > +       commit. This unset mode is meant for extremely simple clients.
> > +
> > +       If responding to a configure event, the window geometry in here
> > +       must respect the sizing negotiations specified by the states in
> > +       the configure event.
> > +
> > +       The arguments are given in the surface local coordinate space of
> > +       the wl_surface associated with this xdg_surface.
> > +
> > +       The width and height must be greater than zero.
> > +      </description>
> > +      <arg name="x" type="int"/>
> > +      <arg name="y" type="int"/>
> > +      <arg name="width" type="int"/>
> > +      <arg name="height" type="int"/>
> > +    </request>
> > +
> > +    <request name="set_maximized">
> > +      <description summary="maximize the window">
> > +       Maximize the surface.
> > +
> > +       After requesting that the surface should be maximized, the compositor
> > +       will respond by emitting a configure event with the "maximized" state
> > +       and the required window geometry. The client should then update its
> > +       content, drawing it in a maximized state, i.e. without shadow or other
> > +       decoration outside of the window geometry. The client must also
> > +       acknowledge the configure when committing the new content (see
> > +       ack_configure).
> > +
> > +       It is up to the compositor to decide how and where to maximize the
> > +       surface, for example which output and what region of the screen should
> > +       be used.
> > +
> > +       If the surface was already maximized, the compositor will still emit
> > +       a configure event with the "maximized" state.
> > +      </description>
> > +    </request>
> > +
> > +    <request name="unset_maximized">
> > +      <description summary="unmaximize the window">
> > +       Unmaximize the surface.
> > +
> > +       After requesting that the surface should be unmaximized, the compositor
> > +       will respond by emitting a configure event without the "maximized"
> > +       state. If available, the compositor will include the window geometry
> > +       dimensions the window had prior to being maximized in the configure
> > +       request. The client must then update its content, drawing it in a
> > +       regular state, i.e. potentially with shadow, etc. The client must also
> > +       acknowledge the configure when committing the new content (see
> > +       ack_configure).
> > +
> > +       It is up to the compositor to position the surface after it was
> > +       unmaximized; usually the position the surface had before maximizing, if
> > +       applicable.
> > +
> > +       If the surface was already not maximized, the compositor will still
> > +       emit a configure event without the "maximized" state.
> > +      </description>
> > +    </request>
> > +
> > +    <request name="set_fullscreen">
> > +      <description summary="set the window as fullscreen on a monitor">
> > +       Make the surface fullscreen.
> > +
> > +       You can specify an output that you would prefer to be fullscreen.
> > +       If this value is NULL, it's up to the compositor to choose which
> > +       display will be used to map this surface.
> > +
> > +       If the surface doesn't cover the whole output, the compositor will
> > +       position the surface in the center of the output and compensate with
> > +       black borders filling the rest of the output.
> > +      </description>
> > +      <arg name="output" type="object" interface="wl_output" allow-null="true"/>
> > +    </request>
> > +    <request name="unset_fullscreen" />
> > +
> > +    <request name="set_minimized">
> > +      <description summary="set the window as minimized">
> > +       Request that the compositor minimize your surface. There is no
> > +       way to know if the surface is currently minimized, nor is there
> > +       any way to unset minimization on this surface.
> > +
> > +       If you are looking to throttle redrawing when minimized, please
> > +       instead use the wl_surface.frame event for this, as this will
> > +       also work with live previews on windows in Alt-Tab, Expose or
> > +       similar compositor features.
> > +      </description>
> > +    </request>
> > +
> > +    <event name="close">
> > +      <description summary="surface wants to be closed">
> > +       The close event is sent by the compositor when the user
> > +       wants the surface to be closed. This should be equivalent to
> > +       the user clicking the close button in client-side decorations,
> > +       if your application has any...
> > +
> > +       This is only a request that the user intends to close your
> > +       window. The client may choose to ignore this request, or show
> > +       a dialog to ask the user to save their data...
> > +      </description>
> > +    </event>
> > +  </interface>
> > +
> > +  <interface name="zxdg_popup_v6" version="1">
> > +    <description summary="short-lived, popup surfaces for menus">
> > +      A popup surface is a short-lived, temporary surface that can be
> > +      used to implement menus. It takes an explicit grab on the surface
> > +      that will be dismissed when the user dismisses the popup. This can
> > +      be done by the user clicking outside the surface, using the keyboard,
> > +      or even locking the screen through closing the lid or a timeout.
> > +
> > +      When the popup is dismissed, a popup_done event will be sent out,
> > +      and at the same time the surface will be unmapped. The xdg_popup
> > +      object is now inert and cannot be reactivated, so clients should
> > +      destroy it. Explicitly destroying the xdg_popup object will also
> > +      dismiss the popup and unmap the surface.
> > +
> > +      Clients will receive events for all their surfaces during this
> > +      grab (which is an "owner-events" grab in X11 parlance). This is
> > +      done so that users can navigate through submenus and other
> > +      "nested" popup windows without having to dismiss the topmost
> > +      popup.
> > +
> > +      Clients that want to dismiss the popup when another surface of
> > +      their own is clicked should dismiss the popup using the destroy
> > +      request.
> > +
> > +      The parent surface must have either an xdg_surface or xdg_popup
> > +      role.
> > +
> > +      Specifying an xdg_popup for the parent means that the popups are
> > +      nested, with this popup now being the topmost popup. Nested
> > +      popups must be destroyed in the reverse order they were created
> > +      in, e.g. the only popup you are allowed to destroy at all times
> > +      is the topmost one.
> > +
> > +      If there is an existing popup when creating a new popup, the
> > +      parent must be the current topmost popup.
> > +
> > +      A parent surface must be mapped before the new popup is mapped.
> > +
> > +      When compositors choose to dismiss a popup, they will likely
> > +      dismiss every nested popup as well. When a compositor dismisses
> > +      popups, it will follow the same dismissing order as required
> > +      from the client.
> > +
> > +      The x and y arguments passed when creating the popup object specify
> > +      where the top left of the popup should be placed, relative to the
> > +      local surface coordinates of the parent surface. See
> > +      xdg_shell.get_xdg_popup.
> > +
> > +      The client must call wl_surface.commit on the corresponding wl_surface
> > +      for the xdg_popup state to take effect.
> > +
> > +      For a surface to be mapped by the compositor the client must have
> > +      committed both the xdg_popup state and a buffer.
> > +    </description>
> > +
> > +    <request name="destroy" type="destructor">
> > +      <description summary="remove xdg_popup interface">
> > +       This destroys the popup. Explicitly destroying the xdg_popup
> > +       object will also dismiss the popup, and unmap the surface.
> > +
> > +       If this xdg_popup is not the "topmost" popup, a protocol error
> > +       will be sent.
> > +      </description>
> > +    </request>
> > +
> > +    <event name="popup_done">
> > +      <description summary="popup interaction is done">
> > +       The popup_done event is sent out when a popup is dismissed by the
> > +       compositor. The client should destroy the xdg_popup object at this
> > +       point.
> > +      </description>
> > +    </event>
> > +
> > +  </interface>
> > +</protocol>
> > --
> > 2.4.3
> >
> > _______________________________________________
> > wayland-devel mailing list
> > wayland-devel at lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/wayland-devel
> 
> 
> 
> -- 
>   Jasper
> _______________________________________________
> wayland-devel mailing list
> wayland-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/wayland-devel


More information about the wayland-devel mailing list