[PATCH wayland-protocols v2] xdg-shell: Bump unstable version to 6
Jonas Ådahl
jadahl at gmail.com
Thu Dec 3 00:33:47 PST 2015
This copies the version 5 of the XML to a new version 6 version, while
at the same time the interface names are changed to use the unstable
naming convention.
A whitespace cleanup was done as no git-blame:ability would be lost
anyway.
Signed-off-by: Jonas Ådahl <jadahl at gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike at osg.samsung.com>
---
Hey,
Made a mistake in the first version, so here comes a second version:
Changes since v1:
Updated the requests that take or create xdg_surface/xdg_popup objects
use to the new names.
Jonas
Makefile.am | 1 +
unstable/xdg-shell/xdg-shell-unstable-v6.xml | 624 +++++++++++++++++++++++++++
2 files changed, 625 insertions(+)
create mode 100644 unstable/xdg-shell/xdg-shell-unstable-v6.xml
diff --git a/Makefile.am b/Makefile.am
index 5926a41..4a2974d 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -5,6 +5,7 @@ unstable_protocols = \
unstable/text-input/text-input-unstable-v1.xml \
unstable/input-method/input-method-unstable-v1.xml \
unstable/xdg-shell/xdg-shell-unstable-v5.xml \
+ unstable/xdg-shell/xdg-shell-unstable-v6.xml \
$(NULL)
nobase_dist_pkgdata_DATA = \
diff --git a/unstable/xdg-shell/xdg-shell-unstable-v6.xml b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
new file mode 100644
index 0000000..02a40ef
--- /dev/null
+++ b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
@@ -0,0 +1,624 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="xdg_shell_unstable_v6">
+
+ <copyright>
+ Copyright © 2008-2013 Kristian Høgsberg
+ Copyright © 2013 Rafael Antognolli
+ Copyright © 2013 Jasper St. Pierre
+ Copyright © 2010-2013 Intel Corporation
+
+ Permission is hereby granted, free of charge, to any person obtaining a
+ copy of this software and associated documentation files (the "Software"),
+ to deal in the Software without restriction, including without limitation
+ the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ and/or sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice (including the next
+ paragraph) shall be included in all copies or substantial portions of the
+ Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ DEALINGS IN THE SOFTWARE.
+ </copyright>
+
+ <interface name="zxdg_shell_v6" version="1">
+ <description summary="create desktop-style surfaces">
+ xdg_shell allows clients to turn a wl_surface into a "real window"
+ which can be dragged, resized, stacked, and moved around by the
+ user. Everything about this interface is suited towards traditional
+ desktop environments.
+ </description>
+
+ <enum name="version">
+ <description summary="latest protocol version">
+ The 'current' member of this enum gives the version of the
+ protocol. Implementations can compare this to the version
+ they implement using static_assert to ensure the protocol and
+ implementation versions match.
+ </description>
+ <entry name="current" value="5" summary="Always the latest version"/>
+ </enum>
+
+ <enum name="error">
+ <entry name="role" value="0" summary="given wl_surface has another role"/>
+ <entry name="defunct_surfaces" value="1" summary="xdg_shell was destroyed before children"/>
+ <entry name="not_the_topmost_popup" value="2" summary="the client tried to map or destroy a non-topmost popup"/>
+ <entry name="invalid_popup_parent" value="3" summary="the client specified an invalid popup parent surface"/>
+ </enum>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy xdg_shell">
+ Destroy this xdg_shell object.
+
+ Destroying a bound xdg_shell object while there are surfaces
+ still alive created by this xdg_shell object instance is illegal
+ and will result in a protocol error.
+ </description>
+ </request>
+
+ <request name="use_unstable_version">
+ <description summary="enable use of this unstable version">
+ Negotiate the unstable version of the interface. This
+ mechanism is in place to ensure client and server agree on the
+ unstable versions of the protocol that they speak or exit
+ cleanly if they don't agree. This request will go away once
+ the xdg-shell protocol is stable.
+ </description>
+ <arg name="version" type="int"/>
+ </request>
+
+ <request name="get_xdg_surface">
+ <description summary="create a shell surface from a surface">
+ This creates an xdg_surface for the given surface and gives it the
+ xdg_surface role. A wl_surface can only be given an xdg_surface role
+ once. If get_xdg_surface is called with a wl_surface that already has
+ an active xdg_surface associated with it, or if it had any other role,
+ an error is raised.
+
+ See the documentation of xdg_surface for more details about what an
+ xdg_surface is and how it is used.
+ </description>
+ <arg name="id" type="new_id" interface="zxdg_surface_v6"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ </request>
+
+ <request name="get_xdg_popup">
+ <description summary="create a popup for a surface">
+ This creates an xdg_popup for the given surface and gives it the
+ xdg_popup role. A wl_surface can only be given an xdg_popup role
+ once. If get_xdg_popup is called with a wl_surface that already has
+ an active xdg_popup associated with it, or if it had any other role,
+ an error is raised.
+
+ This request must be used in response to some sort of user action
+ like a button press, key press, or touch down event.
+
+ See the documentation of xdg_popup for more details about what an
+ xdg_popup is and how it is used.
+ </description>
+ <arg name="id" type="new_id" interface="zxdg_popup_v6"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ <arg name="parent" type="object" interface="wl_surface"/>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ </request>
+
+ <event name="ping">
+ <description summary="check if the client is alive">
+ The ping event asks the client if it's still alive. Pass the
+ serial specified in the event back to the compositor by sending
+ a "pong" request back with the specified serial.
+
+ Compositors can use this to determine if the client is still
+ alive. It's unspecified what will happen if the client doesn't
+ respond to the ping request, or in what timeframe. Clients should
+ try to respond in a reasonable amount of time.
+
+ A compositor is free to ping in any way it wants, but a client must
+ always respond to any xdg_shell object it created.
+ </description>
+ <arg name="serial" type="uint" summary="pass this to the pong request"/>
+ </event>
+
+ <request name="pong">
+ <description summary="respond to a ping event">
+ A client must respond to a ping event with a pong request or
+ the client may be deemed unresponsive.
+ </description>
+ <arg name="serial" type="uint" summary="serial of the ping event"/>
+ </request>
+ </interface>
+
+ <interface name="zxdg_surface_v6" version="1">
+ <description summary="A desktop window">
+ An interface that may be implemented by a wl_surface, for
+ implementations that provide a desktop-style user interface.
+
+ It provides requests to treat surfaces like windows, allowing to set
+ properties like maximized, fullscreen, minimized, and to move and resize
+ them, and associate metadata like title and app id.
+
+ The client must call wl_surface.commit on the corresponding wl_surface
+ for the xdg_surface state to take effect. Prior to committing the new
+ state, it can set up initial configuration, such as maximizing or setting
+ a window geometry.
+
+ Even without attaching a buffer the compositor must respond to initial
+ committed configuration, for instance sending a configure event with
+ expected window geometry if the client maximized its surface during
+ initialization.
+
+ For a surface to be mapped by the compositor the client must have
+ committed both an xdg_surface state and a buffer.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="Destroy the xdg_surface">
+ Unmap and destroy the window. The window will be effectively
+ hidden from the user's point of view, and all state like
+ maximization, fullscreen, and so on, will be lost.
+ </description>
+ </request>
+
+ <request name="set_parent">
+ <description summary="set the parent of this surface">
+ Set the "parent" of this surface. This window should be stacked
+ above a parent. The parent surface must be mapped as long as this
+ surface is mapped.
+
+ Parent windows should be set on dialogs, toolboxes, or other
+ "auxiliary" surfaces, so that the parent is raised when the dialog
+ is raised.
+ </description>
+ <arg name="parent" type="object" interface="zxdg_surface_v6" allow-null="true"/>
+ </request>
+
+ <request name="set_title">
+ <description summary="set surface title">
+ Set a short title for the surface.
+
+ This string may be used to identify the surface in a task bar,
+ window list, or other user interface elements provided by the
+ compositor.
+
+ The string must be encoded in UTF-8.
+ </description>
+ <arg name="title" type="string"/>
+ </request>
+
+ <request name="set_app_id">
+ <description summary="set application ID">
+ Set an application identifier for the surface.
+
+ The app ID identifies the general class of applications to which
+ the surface belongs. The compositor can use this to group multiple
+ surfaces together, or to determine how to launch a new application.
+
+ For D-Bus activatable applications, the app ID is used as the D-Bus
+ service name.
+
+ The compositor shell will try to group application surfaces together
+ by their app ID. As a best practice, it is suggested to select app
+ ID's that match the basename of the application's .desktop file.
+ For example, "org.freedesktop.FooViewer" where the .desktop file is
+ "org.freedesktop.FooViewer.desktop".
+
+ See the desktop-entry specification [0] for more details on
+ application identifiers and how they relate to well-known D-Bus
+ names and .desktop files.
+
+ [0] http://standards.freedesktop.org/desktop-entry-spec/
+ </description>
+ <arg name="app_id" type="string"/>
+ </request>
+
+ <request name="show_window_menu">
+ <description summary="show the window menu">
+ Clients implementing client-side decorations might want to show
+ a context menu when right-clicking on the decorations, giving the
+ user a menu that they can use to maximize or minimize the window.
+
+ This request asks the compositor to pop up such a window menu at
+ the given position, relative to the local surface coordinates of
+ the parent surface. There are no guarantees as to what menu items
+ the window menu contains.
+
+ This request must be used in response to some sort of user action
+ like a button press, key press, or touch down event.
+ </description>
+
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ <arg name="x" type="int" summary="the x position to pop up the window menu at"/>
+ <arg name="y" type="int" summary="the y position to pop up the window menu at"/>
+ </request>
+
+ <request name="move">
+ <description summary="start an interactive move">
+ Start an interactive, user-driven move of the surface.
+
+ This request must be used in response to some sort of user action
+ like a button press, key press, or touch down event. The passed
+ serial is used to determine the type of interactive move (touch,
+ pointer, etc).
+
+ The server may ignore move requests depending on the state of
+ the surface (e.g. fullscreen or maximized), or if the passed serial
+ is no longer valid.
+
+ If triggered, the surface will lose the focus of the device
+ (wl_pointer, wl_touch, etc) used for the move. It is up to the
+ compositor to visually indicate that the move is taking place, such as
+ updating a pointer cursor, during the move. There is no guarantee
+ that the device focus will return when the move is completed.
+ </description>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ </request>
+
+ <enum name="resize_edge">
+ <description summary="edge values for resizing">
+ These values are used to indicate which edge of a surface
+ is being dragged in a resize operation.
+ </description>
+ <entry name="none" value="0"/>
+ <entry name="top" value="1"/>
+ <entry name="bottom" value="2"/>
+ <entry name="left" value="4"/>
+ <entry name="top_left" value="5"/>
+ <entry name="bottom_left" value="6"/>
+ <entry name="right" value="8"/>
+ <entry name="top_right" value="9"/>
+ <entry name="bottom_right" value="10"/>
+ </enum>
+
+ <request name="resize">
+ <description summary="start an interactive resize">
+ Start a user-driven, interactive resize of the surface.
+
+ This request must be used in response to some sort of user action
+ like a button press, key press, or touch down event. The passed
+ serial is used to determine the type of interactive resize (touch,
+ pointer, etc).
+
+ The server may ignore resize requests depending on the state of
+ the surface (e.g. fullscreen or maximized).
+
+ If triggered, the client will receive configure events with the
+ "resize" state enum value and the expected sizes. See the "resize"
+ enum value for more details about what is required. The client
+ must also acknowledge configure events using "ack_configure". After
+ the resize is completed, the client will receive another "configure"
+ event without the resize state.
+
+ If triggered, the surface also will lose the focus of the device
+ (wl_pointer, wl_touch, etc) used for the resize. It is up to the
+ compositor to visually indicate that the resize is taking place,
+ such as updating a pointer cursor, during the resize. There is no
+ guarantee that the device focus will return when the resize is
+ completed.
+
+ The edges parameter specifies how the surface should be resized,
+ and is one of the values of the resize_edge enum. The compositor
+ may use this information to update the surface position for
+ example when dragging the top left corner. The compositor may also
+ use this information to adapt its behavior, e.g. choose an
+ appropriate cursor image.
+ </description>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ <arg name="edges" type="uint" summary="which edge or corner is being dragged"/>
+ </request>
+
+ <enum name="state">
+ <description summary="types of state on the surface">
+ The different state values used on the surface. This is designed for
+ state values like maximized, fullscreen. It is paired with the
+ configure event to ensure that both the client and the compositor
+ setting the state can be synchronized.
+
+ States set in this way are double-buffered. They will get applied on
+ the next commit.
+
+ Desktop environments may extend this enum by taking up a range of
+ values and documenting the range they chose in this description.
+ They are not required to document the values for the range that they
+ chose. Ideally, any good extensions from a desktop environment should
+ make its way into standardization into this enum.
+
+ The current reserved ranges are:
+
+ 0x0000 - 0x0FFF: xdg-shell core values, documented below.
+ 0x1000 - 0x1FFF: GNOME
+ </description>
+ <entry name="maximized" value="1" summary="the surface is maximized">
+ <description summary="the surface is maximized">
+ The surface is maximized. The window geometry specified in the configure
+ event must be obeyed by the client.
+ </description>
+ </entry>
+ <entry name="fullscreen" value="2" summary="the surface is fullscreen">
+ <description summary="the surface is fullscreen">
+ The surface is fullscreen. The window geometry specified in the configure
+ event must be obeyed by the client.
+ </description>
+ </entry>
+ <entry name="resizing" value="3" summary="the surface is being resized">
+ <description summary="the surface is being resized">
+ The surface is being resized. The window geometry specified in the
+ configure event is a maximum; the client cannot resize beyond it.
+ Clients that have aspect ratio or cell sizing configuration can use
+ a smaller size, however.
+ </description>
+ </entry>
+ <entry name="activated" value="4" summary="the surface is now activated">
+ <description summary="the surface is now activated">
+ Client window decorations should be painted as if the window is
+ active. Do not assume this means that the window actually has
+ keyboard or pointer focus.
+ </description>
+ </entry>
+ </enum>
+
+ <event name="configure">
+ <description summary="suggest a surface change">
+ The configure event asks the client to resize its surface or to
+ change its state.
+
+ The width and height arguments specify a hint to the window
+ about how its surface should be resized in window geometry
+ coordinates. See set_window_geometry.
+
+ If the width or height arguments are zero, it means the client
+ should decide its own window dimension. This may happen when the
+ compositor need to configure the state of the surface but doesn't
+ have any information about any previous or expected dimension.
+
+ The states listed in the event specify how the width/height
+ arguments should be interpreted, and possibly how it should be
+ drawn.
+
+ Clients should arrange their surface for the new size and
+ states, and then send a ack_configure request with the serial
+ sent in this configure event at some point before committing
+ the new surface.
+
+ If the client receives multiple configure events before it
+ can respond to one, it is free to discard all but the last
+ event it received.
+ </description>
+
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ <arg name="states" type="array"/>
+ <arg name="serial" type="uint"/>
+ </event>
+
+ <request name="ack_configure">
+ <description summary="ack a configure event">
+ When a configure event is received, if a client commits the
+ surface in response to the configure event, then the client
+ must make an ack_configure request sometime before the commit
+ request, passing along the serial of the configure event.
+
+ For instance, the compositor might use this information to move
+ a surface to the top left only when the client has drawn itself
+ for the maximized or fullscreen state.
+
+ If the client receives multiple configure events before it
+ can respond to one, it only has to ack the last configure event.
+
+ A client is not required to commit immediately after sending
+ an ack_configure request - it may even ack_configure several times
+ before its next surface commit.
+
+ The compositor expects that the most recently received
+ ack_configure request at the time of a commit indicates which
+ configure event the client is responding to.
+ </description>
+ <arg name="serial" type="uint" summary="the serial from the configure event"/>
+ </request>
+
+ <request name="set_window_geometry">
+ <description summary="set the new window geometry">
+ The window geometry of a window is its "visible bounds" from the
+ user's perspective. Client-side decorations often have invisible
+ portions like drop-shadows which should be ignored for the
+ purposes of aligning, placing and constraining windows.
+
+ The window geometry is double buffered, and will be applied at the
+ time wl_surface.commit of the corresponding wl_surface is called.
+
+ Once the window geometry of the surface is set once, it is not
+ possible to unset it, and it will remain the same until
+ set_window_geometry is called again, even if a new subsurface or
+ buffer is attached.
+
+ If never set, the value is the full bounds of the surface,
+ including any subsurfaces. This updates dynamically on every
+ commit. This unset mode is meant for extremely simple clients.
+
+ If responding to a configure event, the window geometry in here
+ must respect the sizing negotiations specified by the states in
+ the configure event.
+
+ The arguments are given in the surface local coordinate space of
+ the wl_surface associated with this xdg_surface.
+
+ The width and height must be greater than zero.
+ </description>
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ </request>
+
+ <request name="set_maximized">
+ <description summary="maximize the window">
+ Maximize the surface.
+
+ After requesting that the surface should be maximized, the compositor
+ will respond by emitting a configure event with the "maximized" state
+ and the required window geometry. The client should then update its
+ content, drawing it in a maximized state, i.e. without shadow or other
+ decoration outside of the window geometry. The client must also
+ acknowledge the configure when committing the new content (see
+ ack_configure).
+
+ It is up to the compositor to decide how and where to maximize the
+ surface, for example which output and what region of the screen should
+ be used.
+
+ If the surface was already maximized, the compositor will still emit
+ a configure event with the "maximized" state.
+ </description>
+ </request>
+
+ <request name="unset_maximized">
+ <description summary="unmaximize the window">
+ Unmaximize the surface.
+
+ After requesting that the surface should be unmaximized, the compositor
+ will respond by emitting a configure event without the "maximized"
+ state. If available, the compositor will include the window geometry
+ dimensions the window had prior to being maximized in the configure
+ request. The client must then update its content, drawing it in a
+ regular state, i.e. potentially with shadow, etc. The client must also
+ acknowledge the configure when committing the new content (see
+ ack_configure).
+
+ It is up to the compositor to position the surface after it was
+ unmaximized; usually the position the surface had before maximizing, if
+ applicable.
+
+ If the surface was already not maximized, the compositor will still
+ emit a configure event without the "maximized" state.
+ </description>
+ </request>
+
+ <request name="set_fullscreen">
+ <description summary="set the window as fullscreen on a monitor">
+ Make the surface fullscreen.
+
+ You can specify an output that you would prefer to be fullscreen.
+ If this value is NULL, it's up to the compositor to choose which
+ display will be used to map this surface.
+
+ If the surface doesn't cover the whole output, the compositor will
+ position the surface in the center of the output and compensate with
+ black borders filling the rest of the output.
+ </description>
+ <arg name="output" type="object" interface="wl_output" allow-null="true"/>
+ </request>
+ <request name="unset_fullscreen" />
+
+ <request name="set_minimized">
+ <description summary="set the window as minimized">
+ Request that the compositor minimize your surface. There is no
+ way to know if the surface is currently minimized, nor is there
+ any way to unset minimization on this surface.
+
+ If you are looking to throttle redrawing when minimized, please
+ instead use the wl_surface.frame event for this, as this will
+ also work with live previews on windows in Alt-Tab, Expose or
+ similar compositor features.
+ </description>
+ </request>
+
+ <event name="close">
+ <description summary="surface wants to be closed">
+ The close event is sent by the compositor when the user
+ wants the surface to be closed. This should be equivalent to
+ the user clicking the close button in client-side decorations,
+ if your application has any...
+
+ This is only a request that the user intends to close your
+ window. The client may choose to ignore this request, or show
+ a dialog to ask the user to save their data...
+ </description>
+ </event>
+ </interface>
+
+ <interface name="zxdg_popup_v6" version="1">
+ <description summary="short-lived, popup surfaces for menus">
+ A popup surface is a short-lived, temporary surface that can be
+ used to implement menus. It takes an explicit grab on the surface
+ that will be dismissed when the user dismisses the popup. This can
+ be done by the user clicking outside the surface, using the keyboard,
+ or even locking the screen through closing the lid or a timeout.
+
+ When the popup is dismissed, a popup_done event will be sent out,
+ and at the same time the surface will be unmapped. The xdg_popup
+ object is now inert and cannot be reactivated, so clients should
+ destroy it. Explicitly destroying the xdg_popup object will also
+ dismiss the popup and unmap the surface.
+
+ Clients will receive events for all their surfaces during this
+ grab (which is an "owner-events" grab in X11 parlance). This is
+ done so that users can navigate through submenus and other
+ "nested" popup windows without having to dismiss the topmost
+ popup.
+
+ Clients that want to dismiss the popup when another surface of
+ their own is clicked should dismiss the popup using the destroy
+ request.
+
+ The parent surface must have either an xdg_surface or xdg_popup
+ role.
+
+ Specifying an xdg_popup for the parent means that the popups are
+ nested, with this popup now being the topmost popup. Nested
+ popups must be destroyed in the reverse order they were created
+ in, e.g. the only popup you are allowed to destroy at all times
+ is the topmost one.
+
+ If there is an existing popup when creating a new popup, the
+ parent must be the current topmost popup.
+
+ A parent surface must be mapped before the new popup is mapped.
+
+ When compositors choose to dismiss a popup, they will likely
+ dismiss every nested popup as well. When a compositor dismisses
+ popups, it will follow the same dismissing order as required
+ from the client.
+
+ The x and y arguments passed when creating the popup object specify
+ where the top left of the popup should be placed, relative to the
+ local surface coordinates of the parent surface. See
+ xdg_shell.get_xdg_popup.
+
+ The client must call wl_surface.commit on the corresponding wl_surface
+ for the xdg_popup state to take effect.
+
+ For a surface to be mapped by the compositor the client must have
+ committed both the xdg_popup state and a buffer.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="remove xdg_popup interface">
+ This destroys the popup. Explicitly destroying the xdg_popup
+ object will also dismiss the popup, and unmap the surface.
+
+ If this xdg_popup is not the "topmost" popup, a protocol error
+ will be sent.
+ </description>
+ </request>
+
+ <event name="popup_done">
+ <description summary="popup interaction is done">
+ The popup_done event is sent out when a popup is dismissed by the
+ compositor. The client should destroy the xdg_popup object at this
+ point.
+ </description>
+ </event>
+
+ </interface>
+</protocol>
--
2.4.3
More information about the wayland-devel
mailing list