[PATCH wayland-protocols v2] xdg-shell: Bump unstable version to 6
Mike Blumenkrantz
zmike at samsung.com
Thu Dec 3 18:18:30 PST 2015
On Fri, 04 Dec 2015 10:01:21 +0800
Jonas Ådahl <jadahl at gmail.com> wrote:
> On Thu, Dec 03, 2015 at 05:38:34PM -0800, Bryce Harrington wrote:
> > On Fri, Dec 04, 2015 at 08:09:17AM +0800, Jonas Ådahl wrote:
> > > On Thu, Dec 03, 2015 at 03:26:16PM -0800, Bryce Harrington wrote:
> > > > On Thu, Dec 03, 2015 at 04:33:47PM +0800, Jonas Ådahl wrote:
> > > > > This copies the version 5 of the XML to a new version 6 version, while
> > > > > at the same time the interface names are changed to use the unstable
> > > > > naming convention.
> > > > >
> > > > > A whitespace cleanup was done as no git-blame:ability would be lost
> > > > > anyway.
> > > >
> > > > Just a bikeshed but would love to see tabs just go away in the xml
> > > > files. They make protocol patches end up weirdly indented oftentimes.
> > > > Otherwise...
> > >
> > > I too prefer spaces instead of tabs in XML files, but it seems spaces
> > > lost to tabs in what has become the overwhelming majority of indentation
> > > style in these XML files.
> >
> > Was there an explicit reason to favor tabs? Mere tradition seems not
> > terribly compelling given that we've forced a rename and migration to a
> > new repo only just recently. I'd be happy to volunteer for their
> > replacement.
>
> It was a realization that most of wayland.xml did this. I don't think
> there is enough gain by changing wayland.xml since we'd make git blame
> more hard to use, and consistency across protocols is favorable here
> IMHO.
>
git blame -w ?
>
> Jonas
>
> >
> > > > Reviewed-by: Bryce Harrington <bryce at osg.samsung.com>
> > >
> > > Thanks,
> > >
> > >
> > > Jonas
> > >
> > > >
> > > > > Signed-off-by: Jonas Ådahl <jadahl at gmail.com>
> > > > > Reviewed-by: Mike Blumenkrantz <zmike at osg.samsung.com>
> > > > >
> > > > > ---
> > > > >
> > > > > Hey,
> > > > >
> > > > > Made a mistake in the first version, so here comes a second version:
> > > > >
> > > > > Changes since v1:
> > > > >
> > > > > Updated the requests that take or create xdg_surface/xdg_popup objects
> > > > > use to the new names.
> > > > >
> > > > >
> > > > > Jonas
> > > > >
> > > > >
> > > > > Makefile.am | 1 +
> > > > > unstable/xdg-shell/xdg-shell-unstable-v6.xml | 624 +++++++++++++++++++++++++++
> > > > > 2 files changed, 625 insertions(+)
> > > > > create mode 100644 unstable/xdg-shell/xdg-shell-unstable-v6.xml
> > > > >
> > > > > diff --git a/Makefile.am b/Makefile.am
> > > > > index 5926a41..4a2974d 100644
> > > > > --- a/Makefile.am
> > > > > +++ b/Makefile.am
> > > > > @@ -5,6 +5,7 @@ unstable_protocols = \
> > > > > unstable/text-input/text-input-unstable-v1.xml \
> > > > > unstable/input-method/input-method-unstable-v1.xml \
> > > > > unstable/xdg-shell/xdg-shell-unstable-v5.xml \
> > > > > + unstable/xdg-shell/xdg-shell-unstable-v6.xml \
> > > > > $(NULL)
> > > > >
> > > > > nobase_dist_pkgdata_DATA = \
> > > > > diff --git a/unstable/xdg-shell/xdg-shell-unstable-v6.xml b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
> > > > > new file mode 100644
> > > > > index 0000000..02a40ef
> > > > > --- /dev/null
> > > > > +++ b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
> > > > > @@ -0,0 +1,624 @@
> > > > > +<?xml version="1.0" encoding="UTF-8"?>
> > > > > +<protocol name="xdg_shell_unstable_v6">
> > > > > +
> > > > > + <copyright>
> > > > > + Copyright © 2008-2013 Kristian Høgsberg
> > > > > + Copyright © 2013 Rafael Antognolli
> > > > > + Copyright © 2013 Jasper St. Pierre
> > > > > + Copyright © 2010-2013 Intel Corporation
> > > > > +
> > > > > + Permission is hereby granted, free of charge, to any person obtaining a
> > > > > + copy of this software and associated documentation files (the "Software"),
> > > > > + to deal in the Software without restriction, including without limitation
> > > > > + the rights to use, copy, modify, merge, publish, distribute, sublicense,
> > > > > + and/or sell copies of the Software, and to permit persons to whom the
> > > > > + Software is furnished to do so, subject to the following conditions:
> > > > > +
> > > > > + The above copyright notice and this permission notice (including the next
> > > > > + paragraph) shall be included in all copies or substantial portions of the
> > > > > + Software.
> > > > > +
> > > > > + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> > > > > + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> > > > > + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> > > > > + THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> > > > > + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > > > > + FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> > > > > + DEALINGS IN THE SOFTWARE.
> > > > > + </copyright>
> > > > > +
> > > > > + <interface name="zxdg_shell_v6" version="1">
> > > > > + <description summary="create desktop-style surfaces">
> > > > > + xdg_shell allows clients to turn a wl_surface into a "real window"
> > > > > + which can be dragged, resized, stacked, and moved around by the
> > > > > + user. Everything about this interface is suited towards traditional
> > > > > + desktop environments.
> > > > > + </description>
> > > > > +
> > > > > + <enum name="version">
> > > > > + <description summary="latest protocol version">
> > > > > + The 'current' member of this enum gives the version of the
> > > > > + protocol. Implementations can compare this to the version
> > > > > + they implement using static_assert to ensure the protocol and
> > > > > + implementation versions match.
> > > > > + </description>
> > > > > + <entry name="current" value="5" summary="Always the latest version"/>
> > > > > + </enum>
> > > > > +
> > > > > + <enum name="error">
> > > > > + <entry name="role" value="0" summary="given wl_surface has another role"/>
> > > > > + <entry name="defunct_surfaces" value="1" summary="xdg_shell was destroyed before children"/>
> > > > > + <entry name="not_the_topmost_popup" value="2" summary="the client tried to map or destroy a non-topmost popup"/>
> > > > > + <entry name="invalid_popup_parent" value="3" summary="the client specified an invalid popup parent surface"/>
> > > > > + </enum>
> > > > > +
> > > > > + <request name="destroy" type="destructor">
> > > > > + <description summary="destroy xdg_shell">
> > > > > + Destroy this xdg_shell object.
> > > > > +
> > > > > + Destroying a bound xdg_shell object while there are surfaces
> > > > > + still alive created by this xdg_shell object instance is illegal
> > > > > + and will result in a protocol error.
> > > > > + </description>
> > > > > + </request>
> > > > > +
> > > > > + <request name="use_unstable_version">
> > > > > + <description summary="enable use of this unstable version">
> > > > > + Negotiate the unstable version of the interface. This
> > > > > + mechanism is in place to ensure client and server agree on the
> > > > > + unstable versions of the protocol that they speak or exit
> > > > > + cleanly if they don't agree. This request will go away once
> > > > > + the xdg-shell protocol is stable.
> > > > > + </description>
> > > > > + <arg name="version" type="int"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="get_xdg_surface">
> > > > > + <description summary="create a shell surface from a surface">
> > > > > + This creates an xdg_surface for the given surface and gives it the
> > > > > + xdg_surface role. A wl_surface can only be given an xdg_surface role
> > > > > + once. If get_xdg_surface is called with a wl_surface that already has
> > > > > + an active xdg_surface associated with it, or if it had any other role,
> > > > > + an error is raised.
> > > > > +
> > > > > + See the documentation of xdg_surface for more details about what an
> > > > > + xdg_surface is and how it is used.
> > > > > + </description>
> > > > > + <arg name="id" type="new_id" interface="zxdg_surface_v6"/>
> > > > > + <arg name="surface" type="object" interface="wl_surface"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="get_xdg_popup">
> > > > > + <description summary="create a popup for a surface">
> > > > > + This creates an xdg_popup for the given surface and gives it the
> > > > > + xdg_popup role. A wl_surface can only be given an xdg_popup role
> > > > > + once. If get_xdg_popup is called with a wl_surface that already has
> > > > > + an active xdg_popup associated with it, or if it had any other role,
> > > > > + an error is raised.
> > > > > +
> > > > > + This request must be used in response to some sort of user action
> > > > > + like a button press, key press, or touch down event.
> > > > > +
> > > > > + See the documentation of xdg_popup for more details about what an
> > > > > + xdg_popup is and how it is used.
> > > > > + </description>
> > > > > + <arg name="id" type="new_id" interface="zxdg_popup_v6"/>
> > > > > + <arg name="surface" type="object" interface="wl_surface"/>
> > > > > + <arg name="parent" type="object" interface="wl_surface"/>
> > > > > + <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > > > > + <arg name="serial" type="uint" summary="the serial of the user event"/>
> > > > > + <arg name="x" type="int"/>
> > > > > + <arg name="y" type="int"/>
> > > > > + </request>
> > > > > +
> > > > > + <event name="ping">
> > > > > + <description summary="check if the client is alive">
> > > > > + The ping event asks the client if it's still alive. Pass the
> > > > > + serial specified in the event back to the compositor by sending
> > > > > + a "pong" request back with the specified serial.
> > > > > +
> > > > > + Compositors can use this to determine if the client is still
> > > > > + alive. It's unspecified what will happen if the client doesn't
> > > > > + respond to the ping request, or in what timeframe. Clients should
> > > > > + try to respond in a reasonable amount of time.
> > > > > +
> > > > > + A compositor is free to ping in any way it wants, but a client must
> > > > > + always respond to any xdg_shell object it created.
> > > > > + </description>
> > > > > + <arg name="serial" type="uint" summary="pass this to the pong request"/>
> > > > > + </event>
> > > > > +
> > > > > + <request name="pong">
> > > > > + <description summary="respond to a ping event">
> > > > > + A client must respond to a ping event with a pong request or
> > > > > + the client may be deemed unresponsive.
> > > > > + </description>
> > > > > + <arg name="serial" type="uint" summary="serial of the ping event"/>
> > > > > + </request>
> > > > > + </interface>
> > > > > +
> > > > > + <interface name="zxdg_surface_v6" version="1">
> > > > > + <description summary="A desktop window">
> > > > > + An interface that may be implemented by a wl_surface, for
> > > > > + implementations that provide a desktop-style user interface.
> > > > > +
> > > > > + It provides requests to treat surfaces like windows, allowing to set
> > > > > + properties like maximized, fullscreen, minimized, and to move and resize
> > > > > + them, and associate metadata like title and app id.
> > > > > +
> > > > > + The client must call wl_surface.commit on the corresponding wl_surface
> > > > > + for the xdg_surface state to take effect. Prior to committing the new
> > > > > + state, it can set up initial configuration, such as maximizing or setting
> > > > > + a window geometry.
> > > > > +
> > > > > + Even without attaching a buffer the compositor must respond to initial
> > > > > + committed configuration, for instance sending a configure event with
> > > > > + expected window geometry if the client maximized its surface during
> > > > > + initialization.
> > > > > +
> > > > > + For a surface to be mapped by the compositor the client must have
> > > > > + committed both an xdg_surface state and a buffer.
> > > > > + </description>
> > > > > +
> > > > > + <request name="destroy" type="destructor">
> > > > > + <description summary="Destroy the xdg_surface">
> > > > > + Unmap and destroy the window. The window will be effectively
> > > > > + hidden from the user's point of view, and all state like
> > > > > + maximization, fullscreen, and so on, will be lost.
> > > > > + </description>
> > > > > + </request>
> > > > > +
> > > > > + <request name="set_parent">
> > > > > + <description summary="set the parent of this surface">
> > > > > + Set the "parent" of this surface. This window should be stacked
> > > > > + above a parent. The parent surface must be mapped as long as this
> > > > > + surface is mapped.
> > > > > +
> > > > > + Parent windows should be set on dialogs, toolboxes, or other
> > > > > + "auxiliary" surfaces, so that the parent is raised when the dialog
> > > > > + is raised.
> > > > > + </description>
> > > > > + <arg name="parent" type="object" interface="zxdg_surface_v6" allow-null="true"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="set_title">
> > > > > + <description summary="set surface title">
> > > > > + Set a short title for the surface.
> > > > > +
> > > > > + This string may be used to identify the surface in a task bar,
> > > > > + window list, or other user interface elements provided by the
> > > > > + compositor.
> > > > > +
> > > > > + The string must be encoded in UTF-8.
> > > > > + </description>
> > > > > + <arg name="title" type="string"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="set_app_id">
> > > > > + <description summary="set application ID">
> > > > > + Set an application identifier for the surface.
> > > > > +
> > > > > + The app ID identifies the general class of applications to which
> > > > > + the surface belongs. The compositor can use this to group multiple
> > > > > + surfaces together, or to determine how to launch a new application.
> > > > > +
> > > > > + For D-Bus activatable applications, the app ID is used as the D-Bus
> > > > > + service name.
> > > > > +
> > > > > + The compositor shell will try to group application surfaces together
> > > > > + by their app ID. As a best practice, it is suggested to select app
> > > > > + ID's that match the basename of the application's .desktop file.
> > > > > + For example, "org.freedesktop.FooViewer" where the .desktop file is
> > > > > + "org.freedesktop.FooViewer.desktop".
> > > > > +
> > > > > + See the desktop-entry specification [0] for more details on
> > > > > + application identifiers and how they relate to well-known D-Bus
> > > > > + names and .desktop files.
> > > > > +
> > > > > + [0] http://standards.freedesktop.org/desktop-entry-spec/
> > > > > + </description>
> > > > > + <arg name="app_id" type="string"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="show_window_menu">
> > > > > + <description summary="show the window menu">
> > > > > + Clients implementing client-side decorations might want to show
> > > > > + a context menu when right-clicking on the decorations, giving the
> > > > > + user a menu that they can use to maximize or minimize the window.
> > > > > +
> > > > > + This request asks the compositor to pop up such a window menu at
> > > > > + the given position, relative to the local surface coordinates of
> > > > > + the parent surface. There are no guarantees as to what menu items
> > > > > + the window menu contains.
> > > > > +
> > > > > + This request must be used in response to some sort of user action
> > > > > + like a button press, key press, or touch down event.
> > > > > + </description>
> > > > > +
> > > > > + <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > > > > + <arg name="serial" type="uint" summary="the serial of the user event"/>
> > > > > + <arg name="x" type="int" summary="the x position to pop up the window menu at"/>
> > > > > + <arg name="y" type="int" summary="the y position to pop up the window menu at"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="move">
> > > > > + <description summary="start an interactive move">
> > > > > + Start an interactive, user-driven move of the surface.
> > > > > +
> > > > > + This request must be used in response to some sort of user action
> > > > > + like a button press, key press, or touch down event. The passed
> > > > > + serial is used to determine the type of interactive move (touch,
> > > > > + pointer, etc).
> > > > > +
> > > > > + The server may ignore move requests depending on the state of
> > > > > + the surface (e.g. fullscreen or maximized), or if the passed serial
> > > > > + is no longer valid.
> > > > > +
> > > > > + If triggered, the surface will lose the focus of the device
> > > > > + (wl_pointer, wl_touch, etc) used for the move. It is up to the
> > > > > + compositor to visually indicate that the move is taking place, such as
> > > > > + updating a pointer cursor, during the move. There is no guarantee
> > > > > + that the device focus will return when the move is completed.
> > > > > + </description>
> > > > > + <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > > > > + <arg name="serial" type="uint" summary="the serial of the user event"/>
> > > > > + </request>
> > > > > +
> > > > > + <enum name="resize_edge">
> > > > > + <description summary="edge values for resizing">
> > > > > + These values are used to indicate which edge of a surface
> > > > > + is being dragged in a resize operation.
> > > > > + </description>
> > > > > + <entry name="none" value="0"/>
> > > > > + <entry name="top" value="1"/>
> > > > > + <entry name="bottom" value="2"/>
> > > > > + <entry name="left" value="4"/>
> > > > > + <entry name="top_left" value="5"/>
> > > > > + <entry name="bottom_left" value="6"/>
> > > > > + <entry name="right" value="8"/>
> > > > > + <entry name="top_right" value="9"/>
> > > > > + <entry name="bottom_right" value="10"/>
> > > > > + </enum>
> > > > > +
> > > > > + <request name="resize">
> > > > > + <description summary="start an interactive resize">
> > > > > + Start a user-driven, interactive resize of the surface.
> > > > > +
> > > > > + This request must be used in response to some sort of user action
> > > > > + like a button press, key press, or touch down event. The passed
> > > > > + serial is used to determine the type of interactive resize (touch,
> > > > > + pointer, etc).
> > > > > +
> > > > > + The server may ignore resize requests depending on the state of
> > > > > + the surface (e.g. fullscreen or maximized).
> > > > > +
> > > > > + If triggered, the client will receive configure events with the
> > > > > + "resize" state enum value and the expected sizes. See the "resize"
> > > > > + enum value for more details about what is required. The client
> > > > > + must also acknowledge configure events using "ack_configure". After
> > > > > + the resize is completed, the client will receive another "configure"
> > > > > + event without the resize state.
> > > > > +
> > > > > + If triggered, the surface also will lose the focus of the device
> > > > > + (wl_pointer, wl_touch, etc) used for the resize. It is up to the
> > > > > + compositor to visually indicate that the resize is taking place,
> > > > > + such as updating a pointer cursor, during the resize. There is no
> > > > > + guarantee that the device focus will return when the resize is
> > > > > + completed.
> > > > > +
> > > > > + The edges parameter specifies how the surface should be resized,
> > > > > + and is one of the values of the resize_edge enum. The compositor
> > > > > + may use this information to update the surface position for
> > > > > + example when dragging the top left corner. The compositor may also
> > > > > + use this information to adapt its behavior, e.g. choose an
> > > > > + appropriate cursor image.
> > > > > + </description>
> > > > > + <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
> > > > > + <arg name="serial" type="uint" summary="the serial of the user event"/>
> > > > > + <arg name="edges" type="uint" summary="which edge or corner is being dragged"/>
> > > > > + </request>
> > > > > +
> > > > > + <enum name="state">
> > > > > + <description summary="types of state on the surface">
> > > > > + The different state values used on the surface. This is designed for
> > > > > + state values like maximized, fullscreen. It is paired with the
> > > > > + configure event to ensure that both the client and the compositor
> > > > > + setting the state can be synchronized.
> > > > > +
> > > > > + States set in this way are double-buffered. They will get applied on
> > > > > + the next commit.
> > > > > +
> > > > > + Desktop environments may extend this enum by taking up a range of
> > > > > + values and documenting the range they chose in this description.
> > > > > + They are not required to document the values for the range that they
> > > > > + chose. Ideally, any good extensions from a desktop environment should
> > > > > + make its way into standardization into this enum.
> > > > > +
> > > > > + The current reserved ranges are:
> > > > > +
> > > > > + 0x0000 - 0x0FFF: xdg-shell core values, documented below.
> > > > > + 0x1000 - 0x1FFF: GNOME
> > > > > + </description>
> > > > > + <entry name="maximized" value="1" summary="the surface is maximized">
> > > > > + <description summary="the surface is maximized">
> > > > > + The surface is maximized. The window geometry specified in the configure
> > > > > + event must be obeyed by the client.
> > > > > + </description>
> > > > > + </entry>
> > > > > + <entry name="fullscreen" value="2" summary="the surface is fullscreen">
> > > > > + <description summary="the surface is fullscreen">
> > > > > + The surface is fullscreen. The window geometry specified in the configure
> > > > > + event must be obeyed by the client.
> > > > > + </description>
> > > > > + </entry>
> > > > > + <entry name="resizing" value="3" summary="the surface is being resized">
> > > > > + <description summary="the surface is being resized">
> > > > > + The surface is being resized. The window geometry specified in the
> > > > > + configure event is a maximum; the client cannot resize beyond it.
> > > > > + Clients that have aspect ratio or cell sizing configuration can use
> > > > > + a smaller size, however.
> > > > > + </description>
> > > > > + </entry>
> > > > > + <entry name="activated" value="4" summary="the surface is now activated">
> > > > > + <description summary="the surface is now activated">
> > > > > + Client window decorations should be painted as if the window is
> > > > > + active. Do not assume this means that the window actually has
> > > > > + keyboard or pointer focus.
> > > > > + </description>
> > > > > + </entry>
> > > > > + </enum>
> > > > > +
> > > > > + <event name="configure">
> > > > > + <description summary="suggest a surface change">
> > > > > + The configure event asks the client to resize its surface or to
> > > > > + change its state.
> > > > > +
> > > > > + The width and height arguments specify a hint to the window
> > > > > + about how its surface should be resized in window geometry
> > > > > + coordinates. See set_window_geometry.
> > > > > +
> > > > > + If the width or height arguments are zero, it means the client
> > > > > + should decide its own window dimension. This may happen when the
> > > > > + compositor need to configure the state of the surface but doesn't
> > > > > + have any information about any previous or expected dimension.
> > > > > +
> > > > > + The states listed in the event specify how the width/height
> > > > > + arguments should be interpreted, and possibly how it should be
> > > > > + drawn.
> > > > > +
> > > > > + Clients should arrange their surface for the new size and
> > > > > + states, and then send a ack_configure request with the serial
> > > > > + sent in this configure event at some point before committing
> > > > > + the new surface.
> > > > > +
> > > > > + If the client receives multiple configure events before it
> > > > > + can respond to one, it is free to discard all but the last
> > > > > + event it received.
> > > > > + </description>
> > > > > +
> > > > > + <arg name="width" type="int"/>
> > > > > + <arg name="height" type="int"/>
> > > > > + <arg name="states" type="array"/>
> > > > > + <arg name="serial" type="uint"/>
> > > > > + </event>
> > > > > +
> > > > > + <request name="ack_configure">
> > > > > + <description summary="ack a configure event">
> > > > > + When a configure event is received, if a client commits the
> > > > > + surface in response to the configure event, then the client
> > > > > + must make an ack_configure request sometime before the commit
> > > > > + request, passing along the serial of the configure event.
> > > > > +
> > > > > + For instance, the compositor might use this information to move
> > > > > + a surface to the top left only when the client has drawn itself
> > > > > + for the maximized or fullscreen state.
> > > > > +
> > > > > + If the client receives multiple configure events before it
> > > > > + can respond to one, it only has to ack the last configure event.
> > > > > +
> > > > > + A client is not required to commit immediately after sending
> > > > > + an ack_configure request - it may even ack_configure several times
> > > > > + before its next surface commit.
> > > > > +
> > > > > + The compositor expects that the most recently received
> > > > > + ack_configure request at the time of a commit indicates which
> > > > > + configure event the client is responding to.
> > > > > + </description>
> > > > > + <arg name="serial" type="uint" summary="the serial from the configure event"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="set_window_geometry">
> > > > > + <description summary="set the new window geometry">
> > > > > + The window geometry of a window is its "visible bounds" from the
> > > > > + user's perspective. Client-side decorations often have invisible
> > > > > + portions like drop-shadows which should be ignored for the
> > > > > + purposes of aligning, placing and constraining windows.
> > > > > +
> > > > > + The window geometry is double buffered, and will be applied at the
> > > > > + time wl_surface.commit of the corresponding wl_surface is called.
> > > > > +
> > > > > + Once the window geometry of the surface is set once, it is not
> > > > > + possible to unset it, and it will remain the same until
> > > > > + set_window_geometry is called again, even if a new subsurface or
> > > > > + buffer is attached.
> > > > > +
> > > > > + If never set, the value is the full bounds of the surface,
> > > > > + including any subsurfaces. This updates dynamically on every
> > > > > + commit. This unset mode is meant for extremely simple clients.
> > > > > +
> > > > > + If responding to a configure event, the window geometry in here
> > > > > + must respect the sizing negotiations specified by the states in
> > > > > + the configure event.
> > > > > +
> > > > > + The arguments are given in the surface local coordinate space of
> > > > > + the wl_surface associated with this xdg_surface.
> > > > > +
> > > > > + The width and height must be greater than zero.
> > > > > + </description>
> > > > > + <arg name="x" type="int"/>
> > > > > + <arg name="y" type="int"/>
> > > > > + <arg name="width" type="int"/>
> > > > > + <arg name="height" type="int"/>
> > > > > + </request>
> > > > > +
> > > > > + <request name="set_maximized">
> > > > > + <description summary="maximize the window">
> > > > > + Maximize the surface.
> > > > > +
> > > > > + After requesting that the surface should be maximized, the compositor
> > > > > + will respond by emitting a configure event with the "maximized" state
> > > > > + and the required window geometry. The client should then update its
> > > > > + content, drawing it in a maximized state, i.e. without shadow or other
> > > > > + decoration outside of the window geometry. The client must also
> > > > > + acknowledge the configure when committing the new content (see
> > > > > + ack_configure).
> > > > > +
> > > > > + It is up to the compositor to decide how and where to maximize the
> > > > > + surface, for example which output and what region of the screen should
> > > > > + be used.
> > > > > +
> > > > > + If the surface was already maximized, the compositor will still emit
> > > > > + a configure event with the "maximized" state.
> > > > > + </description>
> > > > > + </request>
> > > > > +
> > > > > + <request name="unset_maximized">
> > > > > + <description summary="unmaximize the window">
> > > > > + Unmaximize the surface.
> > > > > +
> > > > > + After requesting that the surface should be unmaximized, the compositor
> > > > > + will respond by emitting a configure event without the "maximized"
> > > > > + state. If available, the compositor will include the window geometry
> > > > > + dimensions the window had prior to being maximized in the configure
> > > > > + request. The client must then update its content, drawing it in a
> > > > > + regular state, i.e. potentially with shadow, etc. The client must also
> > > > > + acknowledge the configure when committing the new content (see
> > > > > + ack_configure).
> > > > > +
> > > > > + It is up to the compositor to position the surface after it was
> > > > > + unmaximized; usually the position the surface had before maximizing, if
> > > > > + applicable.
> > > > > +
> > > > > + If the surface was already not maximized, the compositor will still
> > > > > + emit a configure event without the "maximized" state.
> > > > > + </description>
> > > > > + </request>
> > > > > +
> > > > > + <request name="set_fullscreen">
> > > > > + <description summary="set the window as fullscreen on a monitor">
> > > > > + Make the surface fullscreen.
> > > > > +
> > > > > + You can specify an output that you would prefer to be fullscreen.
> > > > > + If this value is NULL, it's up to the compositor to choose which
> > > > > + display will be used to map this surface.
> > > > > +
> > > > > + If the surface doesn't cover the whole output, the compositor will
> > > > > + position the surface in the center of the output and compensate with
> > > > > + black borders filling the rest of the output.
> > > > > + </description>
> > > > > + <arg name="output" type="object" interface="wl_output" allow-null="true"/>
> > > > > + </request>
> > > > > + <request name="unset_fullscreen" />
> > > > > +
> > > > > + <request name="set_minimized">
> > > > > + <description summary="set the window as minimized">
> > > > > + Request that the compositor minimize your surface. There is no
> > > > > + way to know if the surface is currently minimized, nor is there
> > > > > + any way to unset minimization on this surface.
> > > > > +
> > > > > + If you are looking to throttle redrawing when minimized, please
> > > > > + instead use the wl_surface.frame event for this, as this will
> > > > > + also work with live previews on windows in Alt-Tab, Expose or
> > > > > + similar compositor features.
> > > > > + </description>
> > > > > + </request>
> > > > > +
> > > > > + <event name="close">
> > > > > + <description summary="surface wants to be closed">
> > > > > + The close event is sent by the compositor when the user
> > > > > + wants the surface to be closed. This should be equivalent to
> > > > > + the user clicking the close button in client-side decorations,
> > > > > + if your application has any...
> > > > > +
> > > > > + This is only a request that the user intends to close your
> > > > > + window. The client may choose to ignore this request, or show
> > > > > + a dialog to ask the user to save their data...
> > > > > + </description>
> > > > > + </event>
> > > > > + </interface>
> > > > > +
> > > > > + <interface name="zxdg_popup_v6" version="1">
> > > > > + <description summary="short-lived, popup surfaces for menus">
> > > > > + A popup surface is a short-lived, temporary surface that can be
> > > > > + used to implement menus. It takes an explicit grab on the surface
> > > > > + that will be dismissed when the user dismisses the popup. This can
> > > > > + be done by the user clicking outside the surface, using the keyboard,
> > > > > + or even locking the screen through closing the lid or a timeout.
> > > > > +
> > > > > + When the popup is dismissed, a popup_done event will be sent out,
> > > > > + and at the same time the surface will be unmapped. The xdg_popup
> > > > > + object is now inert and cannot be reactivated, so clients should
> > > > > + destroy it. Explicitly destroying the xdg_popup object will also
> > > > > + dismiss the popup and unmap the surface.
> > > > > +
> > > > > + Clients will receive events for all their surfaces during this
> > > > > + grab (which is an "owner-events" grab in X11 parlance). This is
> > > > > + done so that users can navigate through submenus and other
> > > > > + "nested" popup windows without having to dismiss the topmost
> > > > > + popup.
> > > > > +
> > > > > + Clients that want to dismiss the popup when another surface of
> > > > > + their own is clicked should dismiss the popup using the destroy
> > > > > + request.
> > > > > +
> > > > > + The parent surface must have either an xdg_surface or xdg_popup
> > > > > + role.
> > > > > +
> > > > > + Specifying an xdg_popup for the parent means that the popups are
> > > > > + nested, with this popup now being the topmost popup. Nested
> > > > > + popups must be destroyed in the reverse order they were created
> > > > > + in, e.g. the only popup you are allowed to destroy at all times
> > > > > + is the topmost one.
> > > > > +
> > > > > + If there is an existing popup when creating a new popup, the
> > > > > + parent must be the current topmost popup.
> > > > > +
> > > > > + A parent surface must be mapped before the new popup is mapped.
> > > > > +
> > > > > + When compositors choose to dismiss a popup, they will likely
> > > > > + dismiss every nested popup as well. When a compositor dismisses
> > > > > + popups, it will follow the same dismissing order as required
> > > > > + from the client.
> > > > > +
> > > > > + The x and y arguments passed when creating the popup object specify
> > > > > + where the top left of the popup should be placed, relative to the
> > > > > + local surface coordinates of the parent surface. See
> > > > > + xdg_shell.get_xdg_popup.
> > > > > +
> > > > > + The client must call wl_surface.commit on the corresponding wl_surface
> > > > > + for the xdg_popup state to take effect.
> > > > > +
> > > > > + For a surface to be mapped by the compositor the client must have
> > > > > + committed both the xdg_popup state and a buffer.
> > > > > + </description>
> > > > > +
> > > > > + <request name="destroy" type="destructor">
> > > > > + <description summary="remove xdg_popup interface">
> > > > > + This destroys the popup. Explicitly destroying the xdg_popup
> > > > > + object will also dismiss the popup, and unmap the surface.
> > > > > +
> > > > > + If this xdg_popup is not the "topmost" popup, a protocol error
> > > > > + will be sent.
> > > > > + </description>
> > > > > + </request>
> > > > > +
> > > > > + <event name="popup_done">
> > > > > + <description summary="popup interaction is done">
> > > > > + The popup_done event is sent out when a popup is dismissed by the
> > > > > + compositor. The client should destroy the xdg_popup object at this
> > > > > + point.
> > > > > + </description>
> > > > > + </event>
> > > > > +
> > > > > + </interface>
> > > > > +</protocol>
> > > > > --
> > > > > 2.4.3
> > > > >
> > > > > _______________________________________________
> > > > > wayland-devel mailing list
> > > > > wayland-devel at lists.freedesktop.org
> > > > > http://lists.freedesktop.org/mailman/listinfo/wayland-devel
> _______________________________________________
> wayland-devel mailing list
> wayland-devel at lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/wayland-devel
More information about the wayland-devel
mailing list