[PATCH v5 wayland] protocol: add wl_pointer.frame, axis_source, axis_stop, and axis_discrete
Peter Hutterer
peter.hutterer at who-t.net
Tue Oct 27 22:34:31 PDT 2015
The frame event groups separate pointer events together. The primary use-case
for this at the moment is diagonal scrolling - a vertical/horizontal scroll
event can be grouped together to calculate the correct motion vector.
Frame events group all wl_pointer events. An example sequence of motion events
followed by a diagonal scroll followed by a button event is:
wl_pointer.motion
wl_pointer.frame
wl_pointer.motion
wl_pointer.frame
wl_pointer.axis
wl_pointer.axis
wl_pointer.frame
wl_pointer.button
wl_pointer.frame
In the future, other extensions may insert additional information about an
event into the frame. For example, an extension may add information about the
physical device that generated an event into the frame. For this reason,
enter/leave events are grouped by a frame event too.
The axis_source event determines how an axis event was generated. That enables
clients to judge when to use kinetic scrolling. Only one axis_source event is
allowed per frame and applies to all events in this frame.
The axis_stop event notifies a client about the termination of a scroll
sequence, likewise needed to calculate kinetic scrolling parameters.
Multiple axis_stop events within the same frame indicate that scrolling has
stopped in all these axis at the same time.
The axis_discrete event provides the wheel click count. Previously the axis
value was some hardcoded number (10), with the discrete steps this enables a
client to differ between line-based scrolling on a mouse wheel and smooth
scrolling with a touchpad.
We can't extend the existing wl_pointer.axis events so we introduce a new
concept: latching events. These events (currently only axis_discrete)
are prefixed before a wl_pointer.axis event. A client must build the full
state of the event until the respective top-level event arrives.
i.e. a single event frame for a diagonal scroll with discrete information may
be:
wl_pointer.axis_source
wl_pointer.axis_discrete
wl_pointer.axis
wl_pointer.axis_discrete
wl_pointer.axis
wl_pointer.frame
Signed-off-by: Peter Hutterer <peter.hutterer at who-t.net>
---
Changes to v4:
- axis argument added to axis_discrete. While technically redundant since
the axis event carries this information, the lack of this argument leads
to awkward client-side implementation. A single uint32_t value with no
other information attached had to be stacked in a temporary variable, only
the next event can then tell us whether the event was x or y scroll.
Providing the axis in the discrete event means we can immediately stack
this into the right variable.
- the big change is the rename from axis_frame to wl_pointer.frame.
the axis_frame concept was solid but working on other things Carlos and I
discovered that we may need to add additional information to some events.
A generic wl_pointer.frame event gives us the same benefit of the
axis_frame but allows to insert events (even from other extensions)
into a specific frame and augment that event.
The commit message and comments have been updated accordingly, the logic
for axis events is effectively the same, but all other wl_pointer events
are now too grouped by frame events.
This includes enter/leave too, even though they are compositor-generated
events.
protocol/wayland.xml | 127 +++++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 124 insertions(+), 3 deletions(-)
diff --git a/protocol/wayland.xml b/protocol/wayland.xml
index 59819e9..12e55cc 100644
--- a/protocol/wayland.xml
+++ b/protocol/wayland.xml
@@ -1411,7 +1411,7 @@
</interface>
- <interface name="wl_pointer" version="3">
+ <interface name="wl_pointer" version="5">
<description summary="pointer input device">
The wl_pointer interface represents one or more input devices,
such as mice, which control the pointer location and pointer_focus
@@ -1578,9 +1578,130 @@
</description>
</request>
+ <!-- Version 5 additions -->
+ <event name="frame" since="5">
+ <description summary="end of a pointer event sequence">
+ Indicates the end of a set of events that logically belong together.
+ A client is expected to accumulate the data in all events events
+ within the frame before proceeding.
+
+ All wl_pointer events before a wl_pointer.frame event belong
+ logically together. For example, in a diagonal scroll motion the
+ compositor will send an optional wl_pointer.axis_source event, two
+ wl_pointer.axis events (horizontal and vertical) and finally a
+ wl_pointer.frame event. The client may use this information to
+ calculate a diagonal vector for scrolling.
+
+ When multiple wl_pointer.axis events occur within the same frame,
+ the motion vector is the combined motion of all events.
+ When a wl_pointer.axis and a wl_pointer.axis_stop event occur within
+ the same frame, this indicates that axis movement in one axis has
+ stopped but continues in the other axis.
+ When multiple wl_pointer.axis_stop events occur within in the same
+ frame, this indicates that these axes stopped in the same instance.
+
+ A wl_pointer.frame event is sent for every logical event group,
+ even if the group only contains a single wl_pointer event.
+ Specifically, a client may get a sequence: motion, frame, button,
+ frame, axis, frame, axis_stop, frame.
+
+ The wl_pointer.enter and wl_pointer.leave events are logical events
+ generated by the compositor and not the hardware. These events are
+ also grouped by a wl_pointer.frame.
+ </description>
+ </event>
+
+ <enum name="axis_source">
+ <description summary="axis source types">
+ Describes the source types for axis events. This indicates to the
+ client how an axis event was physically generated; a client may
+ adjust the user interface accordingly. For example, scroll events
+ from a "finger" source may be in a smooth coordinate space with
+ kinetic scrolling whereas a "wheel" source may be in discrete steps
+ of a number of lines.
+
+ The "continous" axis source is a device generating events in a
+ continuous coordinate space, but using something other than a
+ finger. One example for this source is button-based scrolling where
+ the vertical motion of a device is converted to scroll events while
+ a button is held down.
+ </description>
+ <entry name="wheel" value="0" summary="A physical wheel" />
+ <entry name="finger" value="1" summary="Finger on a touch surface" />
+ <entry name="continuous" value="2" summary="Continuous coordinate space"/>
+ </enum>
+
+ <event name="axis_source" since="5">
+ <description summary="axis source event">
+ Source information for scroll and other axes.
+
+ This event does not occur on its own. It is sent before a
+ wl_pointer.frame event and carries the source information for
+ all events within that frame.
+
+ The source specifies how this event was generated. If the source is
+ wl_pointer.axis_source.finger, a wl_pointer.axis_stop event will be
+ sent when the user lifts the finger off the device.
+
+ If the source is wl_pointer.axis_source.wheel or
+ wl_pointer.axis_source.continuous, a wl_pointer.axis_stop event may
+ be sent but is not guaranteed to be sent.
+
+ This event is optional. If the source is unknown for a particular
+ axis event sequence, no event is sent.
+ Only one wl_pointer.axis_source event is permitted per frame.
+
+ The order of wl_pointer.axis_discrete and wl_pointer.axis_source is
+ not guaranteed.
+ </description>
+ <arg name="axis_source" type="uint"/>
+ </event>
+
+ <event name="axis_stop" since="5">
+ <description summary="axis stop event">
+ Stop notification for scroll and other axes.
+
+ For some wl_pointer.axis_source types, a wl_pointer.axis_stop event
+ is sent to notify a client that the axis sequence has terminated.
+ This enables the client to implement kinetic scrolling.
+ See the wl_pointer.axis_source documentation for information on when
+ this event may be generated.
+
+ Any wl_pointer.axis events with the same axis_source after this
+ event should be considered as the start of a new axis motion.
+
+ The timestamp is to be interpreted identical to the timestamp in the
+ wl_pointer.axis event. The timestamp value may be the same as a
+ preceeding wl_pointer.axis event.
+ </description>
+ <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
+ <arg name="axis" type="uint" summary="the axis stopped with this event"/>
+ </event>
+
+ <event name="axis_discrete" since="5">
+ <description summary="axis click event">
+ Discrete step information for scroll and other axes.
+
+ This event does not occur on its own. It is sent before a
+ wl_pointer.axis event and carries the axis value of the
+ wl_pointer.axis event in discrete steps (e.g. mouse wheel clicks).
+
+ This event is optional, continuous scrolling devices
+ like two-finger scrolling on touchpads do not have discrete
+ steps and do not generate this event.
+
+ The discrete value carries the directional information. e.g. a value
+ of -2 is two steps towards the negative direction of this axis.
+
+ The order of wl_pointer.axis_discrete and wl_pointer.axis_source is
+ not guaranteed.
+ </description>
+ <arg name="axis" type="uint"/>
+ <arg name="discrete" type="int"/>
+ </event>
</interface>
- <interface name="wl_keyboard" version="4">
+ <interface name="wl_keyboard" version="5">
<description summary="keyboard input device">
The wl_keyboard interface represents one or more keyboards
associated with a seat.
@@ -1694,7 +1815,7 @@
</event>
</interface>
- <interface name="wl_touch" version="3">
+ <interface name="wl_touch" version="5">
<description summary="touchscreen input device">
The wl_touch interface represents a touchscreen
associated with a seat.
--
2.4.3
More information about the wayland-devel
mailing list