[PATCH v2 wayland-web] Updated build instructions for wayland-protocols and libwacom

Bryce Harrington bryce at osg.samsung.com
Tue Apr 5 23:46:33 UTC 2016


On Fri, Mar 25, 2016 at 07:37:33PM -0700, spitzak at gmail.com wrote:
> From: Bill Spitzak <spitzak at gmail.com>
> 
> The Mint instructions have been tested, I had to guess at the Ubuntu12
> instructions as I no longer have that machine.
> 
> v2: Use MAKEFLAGS instead of switches
>     Use & instead of &
>     Some rewording of Ubuntu instructions to point out they are old
> 
> Signed-off-by: Bill Spitzak <spitzak at gmail.com>

Just spot checked but all looks ok.  I'm not super worried about the
ubuntu 12.04 directions being absolutely correct since I expect most
people wanting to do bleeding edge Wayland are at least going to be on
14.04, and 16.04 is right around the corner.

pushed:
   4022eeb..4fa80f2  master -> master


Bill, btw, I would love to hear if wayland-build-tools runs on your Mint
system, and if not would love to get patches to make it do so.  I run it
on Ubuntu 14.04 which I imagine is similar enough to your system that it
might all "just work".

Basically, there's a config file wl_defines.sh which you copy to:
  $HOME/.config/wayland-build-tools/wl_defines.sh

The defaults should all be fine, but feel free to edit.

  $ wl_install_deps

This apt-gets all the dependencies, and will prompt for sudo.

I run a from-scratch rebuild of everything on ubuntu 14.04 about once a
month:

  $ wl_clone && rm -rf ~/build/Wayland/install && wl_build

If there's anything that doesn't work on your system, shoot me patches
and we'll fix it up.

Bryce

> ---
>  building.html    |  2 ++
>  mint17.html      | 58 ++++++++++++++++++++++++++++++++++++--------------------
>  ubuntu12.04.html | 31 ++++++++++++++++++------------
>  3 files changed, 58 insertions(+), 33 deletions(-)
> 
> diff --git a/building.html b/building.html
> index 7bfcd8b..b5a83dc 100644
> --- a/building.html
> +++ b/building.html
> @@ -238,6 +238,8 @@ $ cd ..
>    <a href="http://www.freedesktop.org/wiki/Software/libevdev/">libevdev</a>,
>    this is in <a href="http://cgit.freedesktop.org/libevdev"><code>git://anongit.freedesktop.org/libevdev</code></a></li>
>  
> +<li><a href="https://sourceforge.net/projects/linuxwacom/">libwacom</a> source is in <code>git://git.code.sf.net/p/linuxwacom/libwacom</code></li>
> +
>  <li><a href="http://xkbcommon.org/">libxkbcommon</a> source is
>  in <a href="http://github.com/xkbcommon/libxkbcommon"><code>git://github.com/xkbcommon/libxkbcommon</code></a>.</li>
>  </ul>
> diff --git a/mint17.html b/mint17.html
> index ae1c5a8..a1f8341 100644
> --- a/mint17.html
> +++ b/mint17.html
> @@ -12,7 +12,7 @@
>  Building Weston on Linux Mint 17</h1>
>  
>  <p>The following sequence of commands successfully built Weston and
> -XWayland on a Linux Mint 17 Cinnamon system, on October 28 2014. These
> +XWayland on a Linux Mint 17.3 Cinnamon system, on March 2, 2016. These
>  commands will probably work on any system based on Ubuntu 14.04.</p>
>  
>  <p>This is considerably easier than earlier systems as the distributed
> @@ -29,26 +29,42 @@ export PATH=$WLD/bin:$PATH
>  export ACLOCAL_PATH=$WLD/share/aclocal
>  export ACLOCAL="aclocal -I $ACLOCAL_PATH"
>  mkdir -p $ACLOCAL_PATH
> +export MAKEFLAGS="j9" <span class="comment"># or use your own flags</span>
>  
>  <span class="comment"># libwayland:</span>
>  
> -apt install libffi-dev libexpat-dev
> +apt install libffi-dev libexpat-dev libxml2-dev
>  apt install doxygen xmlto <span class="comment"># or use --disable-documentation</span>
>  
>  git clone git://anongit.freedesktop.org/wayland/wayland
>  cd wayland
>  ./autogen.sh --prefix=$WLD
> -make -j 9 && make install
> +make && make install
> +cd ..
> +
> +<span class="comment"># wayland-protocols:</span>
> +
> +git clone git://anongit.freedesktop.org/wayland/wayland-protocols
> +cd wayland-protocols
> +./autogen.sh --prefix=$WLD
> +make && make install
>  cd ..
>  
>  <span class="comment"># libinput:</span>
>  
>  apt install libmtdev-dev libudev-dev libevdev-dev
>  
> +<span class="comment"># newer version of libwacom is needed than in apt</span>
> +apt install libgudev-1.0-dev
> +git clone git://git.code.sf.net/p/linuxwacom/libwacom
> +cd libwacom
> +make && make install
> +cd ..
> +
>  git clone git://anongit.freedesktop.org/wayland/libinput
>  cd libinput
>  ./autogen.sh --prefix=$WLD
> -make -j 9 && make install
> +make && make install
>  cd ..
>  
>  <span class="comment"># weston:</span>
> @@ -60,7 +76,7 @@ apt install libegl1-mesa-dev libgles2-mesa-dev libxcursor-dev libcairo2-dev \
>  git clone git://anongit.freedesktop.org/wayland/weston
>  cd weston
>  ./autogen.sh --prefix=$WLD --disable-setuid-install
> -make -j 9 && make install
> +make && make install
>  cd ..
>  
>  <span class="comment"># X Server:</span>
> @@ -71,91 +87,91 @@ apt install libgl1-mesa-dri-dev libgcrypt11-dev libxkbfile-dev libxfont-dev \
>  git clone git://anongit.freedesktop.org/xorg/util/macros
>  cd macros
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/xcmiscproto
>  cd xcmiscproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/lib/libxtrans
>  cd libxtrans
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/bigreqsproto
>  cd bigreqsproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/xproto
>  cd xproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/randrproto
>  cd randrproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/fontsproto
>  cd fontsproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/videoproto
>  cd videoproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/compositeproto
>  cd compositeproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/recordproto
>  cd recordproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/scrnsaverproto
>  cd scrnsaverproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/resourceproto
>  cd resourceproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/xf86driproto
>  cd xf86driproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/presentproto
>  cd presentproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/proto/xineramaproto
>  cd xineramaproto
>  ./autogen.sh --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/xorg/xserver
> @@ -163,7 +179,7 @@ cd xserver
>  ./autogen.sh --prefix=$WLD --disable-docs --disable-devel-docs \
>    --enable-xwayland --disable-xorg --disable-xvfb --disable-xnest \
>    --disable-xquartz --disable-xwin
> -make && make install
> +make && make install
>  cd ..
>  
>  <span class="comment"># Links needed so XWayland works:</span>
> diff --git a/ubuntu12.04.html b/ubuntu12.04.html
> index cc99064..a079b04 100644
> --- a/ubuntu12.04.html
> +++ b/ubuntu12.04.html
> @@ -15,13 +15,12 @@ Building Weston on Ubuntu 12.04</h1>
>  XWayland on an Ubuntu 12.04 LTS system, on October 29 2014. This system had
>  previously been used to compile Xlib programs, and thus already had
>  some dependencies (such as git, the compiler, and X11 header files)
> -installed.</p>
> +installed. The commands have been updated for recent versions of
> +Wayland but not tested.</p>
>  
> -<p>Parallel make (<code>make -j 9</code>) will probably work on all
> -packages but only the ones shown were compiled this way.</p>
> -
> -<p>Newer Linux distributions should require fewer things to be
> -compiled from git.</p>
> +<p>This is about the oldest version of Linux which can compile Weston.
> +Newer Linux distributions should require fewer things to be compiled
> +from git.</p>
>  
>  <p>Conversely, newer versions of the code, in particular Mesa, will
>  probably require more dependencies than shown here.</p>
> @@ -32,20 +31,21 @@ export WLD=$HOME/install
>  export LD_LIBRARY_PATH=$WLD/lib
>  export PKG_CONFIG_PATH=$WLD/lib/pkgconfig/:$WLD/share/pkgconfig/
>  export PATH=$WLD/bin:$PATH
> -
>  export ACLOCAL_PATH=$WLD/share/aclocal
>  export ACLOCAL="aclocal -I $ACLOCAL_PATH"
>  mkdir -p $ACLOCAL_PATH
> +export MAKEFLAGS="j9" <span class="comment"># or use your own flags</span>
>  
>  <span class="comment"># dependencies for libwayland:</span>
>  sudo apt-get install doxygen xmlto <span class="comment"># or use --disable-documentation</span>
> +sudo apt-get install libxml2-dev
>  
>  <span class="comment"># expat with pkg-config needed for libwayland:</span>
>  wget http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
>  tar xzf expat-2.1.0.tar.gz
>  cd expat-2.1.0
>  ./configure --prefix=$WLD
> -make && make install
> +make && make install
>  cd ..
>  
>  <span class="comment"># libwayland-*:</span>
> @@ -55,6 +55,13 @@ cd wayland
>  make && make install
>  cd ..
>  
> +<span class="comment"># wayland-protocols:</span>
> +git clone git://anongit.freedesktop.org/wayland/wayland-protocols
> +cd wayland-protocols
> +./autogen.sh --prefix=$WLD
> +make && make install
> +cd ..
> +
>  <span class="comment"># dependencies for Mesa:
>  # "sudo apt-get build-dep mesa" will install these, but will also
>  # install unwanted items, such as wayland itself, and xcb prototypes
> @@ -132,13 +139,13 @@ cd ..
>  git clone git://anongit.freedesktop.org/pixman
>  cd pixman
>  ./autogen.sh --prefix=$WLD
> -make -j 9 && make install
> +make && make install
>  cd ..
>  
>  git clone git://anongit.freedesktop.org/cairo
>  cd cairo
>  ./autogen.sh --prefix=$WLD --enable-xcb
> -make -j 9 && make install
> +make && make install
>  cd ..
>  
>  <span class="comment"># libinput dependencies:</span>
> @@ -159,7 +166,7 @@ cd ..
>  <span class="comment"># libinput:</span>
>  git clone git://anongit.freedesktop.org/wayland/libinput
>  cd libinput
> -./autogen.sh --prefix=$WLD
> +./autogen.sh --prefix=$WLD --disable-libwacom
>  make && make install
>  cd ..
>  
> @@ -175,7 +182,7 @@ cd ..
>  git clone git://anongit.freedesktop.org/wayland/weston
>  cd weston
>  ./autogen.sh --prefix=$WLD --disable-setuid-install
> -make -j 9 && make install
> +make && make install
>  cd ..
>  
>  <span class="comment"># XServer dependencies:</span>
> -- 
> 1.9.1
> 
> _______________________________________________
> wayland-devel mailing list
> wayland-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/wayland-devel


More information about the wayland-devel mailing list