[PATCH] protocol: Add summaries to event parameters
Yong Bakos
junk at humanoriented.com
Tue Mar 29 23:04:49 UTC 2016
From: Yong Bakos <ybakos at humanoriented.com>
All event arg elements now have an appropriate summary attribute.
This was conducted mostly in response to the undocumented parameter
warnings generated during 'make check'.
Signed-off-by: Yong Bakos <ybakos at humanoriented.com>
---
protocol/wayland.xml | 128 ++++++++++++++++++++++++++-------------------------
1 file changed, 65 insertions(+), 63 deletions(-)
diff --git a/protocol/wayland.xml b/protocol/wayland.xml
index 8739cd3..dffb708 100644
--- a/protocol/wayland.xml
+++ b/protocol/wayland.xml
@@ -70,9 +70,9 @@
own set of error codes. The message is an brief description
of the error, for (debugging) convenience.
</description>
- <arg name="object_id" type="object"/>
- <arg name="code" type="uint"/>
- <arg name="message" type="string"/>
+ <arg name="object_id" type="object" summary="object where the error occurred"/>
+ <arg name="code" type="uint" summary="error code"/>
+ <arg name="message" type="string" summary="error description"/>
</event>
<enum name="error">
@@ -96,7 +96,7 @@
When the client receive this event, it will know that it can
safely reuse the object ID.
</description>
- <arg name="id" type="uint" />
+ <arg name="id" type="uint" summary="deleted object id"/>
</event>
</interface>
@@ -141,9 +141,9 @@
the given name is now available, and it implements the
given version of the given interface.
</description>
- <arg name="name" type="uint"/>
- <arg name="interface" type="string"/>
- <arg name="version" type="uint"/>
+ <arg name="name" type="uint" summary="name of the global object"/>
+ <arg name="interface" type="string" summary="interface implemented by the object"/>
+ <arg name="version" type="uint" summary="interface version"/>
</event>
<event name="global_remove">
@@ -159,7 +159,7 @@
ignored until the client destroys it, to avoid races between
the global going away and a client sending a request to it.
</description>
- <arg name="name" type="uint"/>
+ <arg name="name" type="uint" summary="name of the global object"/>
</event>
</interface>
@@ -367,7 +367,7 @@
can be used for buffers. Known formats include
argb8888 and xrgb8888.
</description>
- <arg name="format" type="uint" enum="format"/>
+ <arg name="format" type="uint" enum="format" summary="buffer pixel format"/>
</event>
</interface>
@@ -485,7 +485,7 @@
event per offered mime type.
</description>
- <arg name="mime_type" type="string"/>
+ <arg name="mime_type" type="string" summary="offered mime type"/>
</event>
<!-- Version 3 additions -->
@@ -550,7 +550,7 @@
will be sent right after wl_data_device.enter, or anytime the source
side changes its offered actions through wl_data_source.set_actions.
</description>
- <arg name="source_actions" type="uint"/>
+ <arg name="source_actions" type="uint" summary="actions offered by the data source"/>
</event>
<event name="action" since="3">
@@ -591,7 +591,7 @@
final wl_data_offer.set_actions and wl_data_offer.accept requests
must happen before the call to wl_data_offer.finish.
</description>
- <arg name="dnd_action" type="uint"/>
+ <arg name="dnd_action" type="uint" summary="action selected by the compositor"/>
</event>
</interface>
@@ -633,7 +633,7 @@
Used for feedback during drag-and-drop.
</description>
- <arg name="mime_type" type="string" allow-null="true"/>
+ <arg name="mime_type" type="string" allow-null="true" summary="mime type accepted by the target"/>
</event>
<event name="send">
@@ -643,8 +643,8 @@
close it.
</description>
- <arg name="mime_type" type="string"/>
- <arg name="fd" type="fd"/>
+ <arg name="mime_type" type="string" summary="mime type for the data"/>
+ <arg name="fd" type="fd" summary="file descriptor for the data"/>
</event>
<event name="cancelled">
@@ -746,7 +746,7 @@
Clients can trigger cursor surface changes from this point, so
they reflect the current action.
</description>
- <arg name="dnd_action" type="uint"/>
+ <arg name="dnd_action" type="uint" summary="action selected by the compositor"/>
</event>
</interface>
@@ -821,7 +821,7 @@
mime types it offers.
</description>
- <arg name="id" type="new_id" interface="wl_data_offer"/>
+ <arg name="id" type="new_id" interface="wl_data_offer" summary="the new data_offer object"/>
</event>
<event name="enter">
@@ -832,11 +832,12 @@
local coordinates.
</description>
- <arg name="serial" type="uint"/>
- <arg name="surface" type="object" interface="wl_surface"/>
- <arg name="x" type="fixed"/>
- <arg name="y" type="fixed"/>
- <arg name="id" type="object" interface="wl_data_offer" allow-null="true"/>
+ <arg name="serial" type="uint" summary="serial of the enter event"/>
+ <arg name="surface" type="object" interface="wl_surface" summary="client surface entered"/>
+ <arg name="x" type="fixed" summary="x coordinate in surface-relative coordinates"/>
+ <arg name="y" type="fixed" summary="y coordinate in surface-relative coordinates"/>
+ <arg name="id" type="object" interface="wl_data_offer" allow-null="true"
+ summary="source data_offer object"/>
</event>
<event name="leave">
@@ -855,8 +856,8 @@
coordinates.
</description>
<arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
- <arg name="x" type="fixed"/>
- <arg name="y" type="fixed"/>
+ <arg name="x" type="fixed" summary="x coordinate in surface-relative coordinates"/>
+ <arg name="y" type="fixed" summary="y coordinate in surface-relative coordinates"/>
</event>
<event name="drop">
@@ -891,7 +892,8 @@
destroy the previous selection data_offer, if any, upon receiving
this event.
</description>
- <arg name="id" type="object" interface="wl_data_offer" allow-null="true"/>
+ <arg name="id" type="object" interface="wl_data_offer" allow-null="true"
+ summary="selection data_offer object"/>
</event>
<!-- Version 2 additions -->
@@ -1231,7 +1233,7 @@
Ping a client to check if it is receiving events and sending
requests. A client is expected to reply with a pong request.
</description>
- <arg name="serial" type="uint"/>
+ <arg name="serial" type="uint" summary="serial of the ping"/>
</event>
<event name="configure">
@@ -1255,9 +1257,9 @@
in surface local coordinates.
</description>
- <arg name="edges" type="uint" enum="resize"/>
- <arg name="width" type="int"/>
- <arg name="height" type="int"/>
+ <arg name="edges" type="uint" enum="resize" summary="how the surface was resized"/>
+ <arg name="width" type="int" summary="new width of the surface"/>
+ <arg name="height" type="int" summary="new height of the surface"/>
</event>
<event name="popup_done">
@@ -1533,7 +1535,7 @@
Note that a surface may be overlapping with zero or more outputs.
</description>
- <arg name="output" type="object" interface="wl_output"/>
+ <arg name="output" type="object" interface="wl_output" summary="output entered by the surface"/>
</event>
<event name="leave">
@@ -1542,7 +1544,7 @@
results in it no longer having any part of it within the scanout region
of an output.
</description>
- <arg name="output" type="object" interface="wl_output"/>
+ <arg name="output" type="object" interface="wl_output" summary="output left by the surface"/>
</event>
<!-- Version 2 additions -->
@@ -1701,7 +1703,7 @@
The above behavior also applies to wl_keyboard and wl_touch with the
keyboard and touch capabilities, respectively.
</description>
- <arg name="capabilities" type="uint" enum="capability"/>
+ <arg name="capabilities" type="uint" enum="capability" summary="capabilities of the seat"/>
</event>
<request name="get_pointer">
@@ -1751,7 +1753,7 @@
identify which physical devices the seat represents. Based on
the seat configuration used by the compositor.
</description>
- <arg name="name" type="string"/>
+ <arg name="name" type="string" summary="seat identifier"/>
</event>
<!-- Version 5 additions -->
@@ -1832,8 +1834,8 @@
an appropriate pointer image with the set_cursor request.
</description>
- <arg name="serial" type="uint"/>
- <arg name="surface" type="object" interface="wl_surface"/>
+ <arg name="serial" type="uint" summary="serial of the enter event"/>
+ <arg name="surface" type="object" interface="wl_surface" summary="surface entered by the pointer"/>
<arg name="surface_x" type="fixed" summary="x coordinate in surface-relative coordinates"/>
<arg name="surface_y" type="fixed" summary="y coordinate in surface-relative coordinates"/>
</event>
@@ -1846,8 +1848,8 @@
The leave notification is sent before the enter notification
for the new focus.
</description>
- <arg name="serial" type="uint"/>
- <arg name="surface" type="object" interface="wl_surface"/>
+ <arg name="serial" type="uint" summary="serial of the leave event"/>
+ <arg name="surface" type="object" interface="wl_surface" summary="surface left by the pointer"/>
</event>
<event name="motion">
@@ -1881,10 +1883,10 @@
granularity, with an undefined base.
</description>
- <arg name="serial" type="uint"/>
+ <arg name="serial" type="uint" summary="serial of the button event"/>
<arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
- <arg name="button" type="uint"/>
- <arg name="state" type="uint" enum="button_state"/>
+ <arg name="button" type="uint" summary="button that produced the event"/>
+ <arg name="state" type="uint" enum="button_state" summary="physical state of the button"/>
</event>
<enum name="axis">
@@ -1916,8 +1918,8 @@
</description>
<arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
- <arg name="axis" type="uint" enum="axis"/>
- <arg name="value" type="fixed"/>
+ <arg name="axis" type="uint" enum="axis" summary="axis type"/>
+ <arg name="value" type="fixed" summary="length of vector in surface-relative coordinate space"/>
</event>
<!-- Version 3 additions -->
@@ -2020,7 +2022,7 @@
The order of wl_pointer.axis_discrete and wl_pointer.axis_source is
not guaranteed.
</description>
- <arg name="axis_source" type="uint" enum="axis_source"/>
+ <arg name="axis_source" type="uint" enum="axis_source" summary="source of the axis event"/>
</event>
<event name="axis_stop" since="5">
@@ -2073,8 +2075,8 @@
The order of wl_pointer.axis_discrete and wl_pointer.axis_source is
not guaranteed.
</description>
- <arg name="axis" type="uint" enum="axis" />
- <arg name="discrete" type="int"/>
+ <arg name="axis" type="uint" enum="axis" summary="axis type"/>
+ <arg name="discrete" type="int" summary="number of steps"/>
</event>
</interface>
@@ -2100,9 +2102,9 @@
This event provides a file descriptor to the client which can be
memory-mapped to provide a keyboard mapping description.
</description>
- <arg name="format" type="uint" enum="keymap_format"/>
- <arg name="fd" type="fd"/>
- <arg name="size" type="uint"/>
+ <arg name="format" type="uint" enum="keymap_format" summary="keymap format"/>
+ <arg name="fd" type="fd" summary="keymap file descriptor"/>
+ <arg name="size" type="uint" summary="keymap size, in bytes"/>
</event>
<event name="enter">
@@ -2110,8 +2112,8 @@
Notification that this seat's keyboard focus is on a certain
surface.
</description>
- <arg name="serial" type="uint"/>
- <arg name="surface" type="object" interface="wl_surface"/>
+ <arg name="serial" type="uint" summary="serial of the enter event"/>
+ <arg name="surface" type="object" interface="wl_surface" summary="surface gaining keyboard focus"/>
<arg name="keys" type="array" summary="the currently pressed keys"/>
</event>
@@ -2123,8 +2125,8 @@
The leave notification is sent before the enter notification
for the new focus.
</description>
- <arg name="serial" type="uint"/>
- <arg name="surface" type="object" interface="wl_surface"/>
+ <arg name="serial" type="uint" summary="serial of the leave event"/>
+ <arg name="surface" type="object" interface="wl_surface" summary="surface that lost keyboard focus"/>
</event>
<enum name="key_state">
@@ -2142,10 +2144,10 @@
granularity, with an undefined base.
</description>
- <arg name="serial" type="uint"/>
+ <arg name="serial" type="uint" summary="serial of the key event"/>
<arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
- <arg name="key" type="uint"/>
- <arg name="state" type="uint" enum="key_state"/>
+ <arg name="key" type="uint" summary="key that produced the event"/>
+ <arg name="state" type="uint" enum="key_state" summary="physical state of the key"/>
</event>
<event name="modifiers">
@@ -2154,11 +2156,11 @@
changed, and it should update its local state.
</description>
- <arg name="serial" type="uint"/>
- <arg name="mods_depressed" type="uint"/>
- <arg name="mods_latched" type="uint"/>
- <arg name="mods_locked" type="uint"/>
- <arg name="group" type="uint"/>
+ <arg name="serial" type="uint" summary="serial for the modifiers event"/>
+ <arg name="mods_depressed" type="uint" summary="depressed modifiers"/>
+ <arg name="mods_latched" type="uint" summary="latched modifiers"/>
+ <arg name="mods_locked" type="uint" summary="locked modifiers"/>
+ <arg name="group" type="uint" summary="keyboard layout"/>
</event>
<!-- Version 3 additions -->
@@ -2211,9 +2213,9 @@
this ID. The ID ceases to be valid after a touch up event and may be
re-used in the future.
</description>
- <arg name="serial" type="uint"/>
+ <arg name="serial" type="uint" summary="serial of the touch down event"/>
<arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
- <arg name="surface" type="object" interface="wl_surface"/>
+ <arg name="surface" type="object" interface="wl_surface" summary="surface touched"/>
<arg name="id" type="int" summary="the unique ID of this touch point"/>
<arg name="x" type="fixed" summary="x coordinate in surface-relative coordinates"/>
<arg name="y" type="fixed" summary="y coordinate in surface-relative coordinates"/>
@@ -2225,7 +2227,7 @@
this touchpoint and the touch point's ID is released and may be
re-used in a future touch down event.
</description>
- <arg name="serial" type="uint"/>
+ <arg name="serial" type="uint" summary="serial of the touch up event"/>
<arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
<arg name="id" type="int" summary="the unique ID of this touch point"/>
</event>
--
2.7.2
More information about the wayland-devel
mailing list