[PATCH wayland v4 1/1] protocol: Add summaries to event parameters

Bryce Harrington bryce at osg.samsung.com
Tue May 3 01:15:08 UTC 2016


On Sat, Apr 30, 2016 at 10:50:37PM +0800, Jonas Ådahl wrote:
> On Sat, Apr 30, 2016 at 07:35:50AM -0500, Yong Bakos wrote:
> > From: Yong Bakos <ybakos at humanoriented.com>
> > 
> > All event arg elements now have an appropriate summary attribute.
> > This was conducted mostly in response to the undocumented parameter
> > warnings generated during 'make check'.
> > 
> > Signed-off-by: Yong Bakos <ybakos at humanoriented.com>
> 
> Reviewed-by: Jonas Ådahl <jadahl at gmail.com>

Thanks, pushed:
   ee4e21c..e21aeb5  master -> master

 
> > ---
> >  protocol/wayland.xml | 128 ++++++++++++++++++++++++++-------------------------
> >  1 file changed, 65 insertions(+), 63 deletions(-)
> > 
> > diff --git a/protocol/wayland.xml b/protocol/wayland.xml
> > index 378879e..1555677 100644
> > --- a/protocol/wayland.xml
> > +++ b/protocol/wayland.xml
> > @@ -70,9 +70,9 @@
> >  	own set of error codes.  The message is a brief description
> >  	of the error, for (debugging) convenience.
> >        </description>
> > -      <arg name="object_id" type="object"/>
> > -      <arg name="code" type="uint"/>
> > -      <arg name="message" type="string"/>
> > +      <arg name="object_id" type="object" summary="object where the error occurred"/>
> > +      <arg name="code" type="uint" summary="error code"/>
> > +      <arg name="message" type="string" summary="error description"/>
> >      </event>
> >  
> >      <enum name="error">
> > @@ -96,7 +96,7 @@
> >  	When the client receives this event, it will know that it can
> >  	safely reuse the object ID.
> >        </description>
> > -      <arg name="id" type="uint" />
> > +      <arg name="id" type="uint" summary="deleted object id"/>
> >      </event>
> >    </interface>
> >  
> > @@ -141,9 +141,9 @@
> >          the given name is now available, and it implements the
> >          given version of the given interface.
> >        </description>
> > -      <arg name="name" type="uint"/>
> > -      <arg name="interface" type="string"/>
> > -      <arg name="version" type="uint"/>
> > +      <arg name="name" type="uint" summary="numeric name of the global object"/>
> > +      <arg name="interface" type="string" summary="interface implemented by the object"/>
> > +      <arg name="version" type="uint" summary="interface version"/>
> >      </event>
> >  
> >      <event name="global_remove">
> > @@ -159,7 +159,7 @@
> >  	ignored until the client destroys it, to avoid races between
> >  	the global going away and a client sending a request to it.
> >        </description>
> > -      <arg name="name" type="uint"/>
> > +      <arg name="name" type="uint" summary="numeric name of the global object"/>
> >      </event>
> >    </interface>
> >  
> > @@ -367,7 +367,7 @@
> >  	can be used for buffers. Known formats include
> >  	argb8888 and xrgb8888.
> >        </description>
> > -      <arg name="format" type="uint" enum="format"/>
> > +      <arg name="format" type="uint" enum="format" summary="buffer pixel format"/>
> >      </event>
> >    </interface>
> >  
> > @@ -485,7 +485,7 @@
> >  	event per offered mime type.
> >        </description>
> >  
> > -      <arg name="mime_type" type="string"/>
> > +      <arg name="mime_type" type="string" summary="offered mime type"/>
> >      </event>
> >  
> >      <!-- Version 3 additions -->
> > @@ -550,7 +550,7 @@
> >  	will be sent right after wl_data_device.enter, or anytime the source
> >  	side changes its offered actions through wl_data_source.set_actions.
> >        </description>
> > -      <arg name="source_actions" type="uint"/>
> > +      <arg name="source_actions" type="uint" summary="actions offered by the data source"/>
> >      </event>
> >  
> >      <event name="action" since="3">
> > @@ -591,7 +591,7 @@
> >  	final wl_data_offer.set_actions and wl_data_offer.accept requests
> >  	must happen before the call to wl_data_offer.finish.
> >        </description>
> > -      <arg name="dnd_action" type="uint"/>
> > +      <arg name="dnd_action" type="uint" summary="action selected by the compositor"/>
> >      </event>
> >    </interface>
> >  
> > @@ -633,7 +633,7 @@
> >  	Used for feedback during drag-and-drop.
> >        </description>
> >  
> > -      <arg name="mime_type" type="string" allow-null="true"/>
> > +      <arg name="mime_type" type="string" allow-null="true" summary="mime type accepted by the target"/>
> >      </event>
> >  
> >      <event name="send">
> > @@ -643,8 +643,8 @@
> >  	close it.
> >        </description>
> >  
> > -      <arg name="mime_type" type="string"/>
> > -      <arg name="fd" type="fd"/>
> > +      <arg name="mime_type" type="string" summary="mime type for the data"/>
> > +      <arg name="fd" type="fd" summary="file descriptor for the data"/>
> >      </event>
> >  
> >      <event name="cancelled">
> > @@ -746,7 +746,7 @@
> >  	Clients can trigger cursor surface changes from this point, so
> >  	they reflect the current action.
> >        </description>
> > -      <arg name="dnd_action" type="uint"/>
> > +      <arg name="dnd_action" type="uint" summary="action selected by the compositor"/>
> >      </event>
> >    </interface>
> >  
> > @@ -821,7 +821,7 @@
> >  	mime types it offers.
> >        </description>
> >  
> > -      <arg name="id" type="new_id" interface="wl_data_offer"/>
> > +      <arg name="id" type="new_id" interface="wl_data_offer" summary="the new data_offer object"/>
> >      </event>
> >  
> >      <event name="enter">
> > @@ -832,11 +832,12 @@
> >  	coordinates.
> >        </description>
> >  
> > -      <arg name="serial" type="uint"/>
> > -      <arg name="surface" type="object" interface="wl_surface"/>
> > -      <arg name="x" type="fixed"/>
> > -      <arg name="y" type="fixed"/>
> > -      <arg name="id" type="object" interface="wl_data_offer" allow-null="true"/>
> > +      <arg name="serial" type="uint" summary="serial number of the enter event"/>
> > +      <arg name="surface" type="object" interface="wl_surface" summary="client surface entered"/>
> > +      <arg name="x" type="fixed" summary="surface-local x coordinate"/>
> > +      <arg name="y" type="fixed" summary="surface-local y coordinate"/>
> > +      <arg name="id" type="object" interface="wl_data_offer" allow-null="true"
> > +	   summary="source data_offer object"/>
> >      </event>
> >  
> >      <event name="leave">
> > @@ -855,8 +856,8 @@
> >  	coordinates.
> >        </description>
> >        <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
> > -      <arg name="x" type="fixed"/>
> > -      <arg name="y" type="fixed"/>
> > +      <arg name="x" type="fixed" summary="surface-local x coordinate"/>
> > +      <arg name="y" type="fixed" summary="surface-local y coordinate"/>
> >      </event>
> >  
> >      <event name="drop">
> > @@ -891,7 +892,8 @@
> >  	destroy the previous selection data_offer, if any, upon receiving
> >  	this event.
> >        </description>
> > -      <arg name="id" type="object" interface="wl_data_offer" allow-null="true"/>
> > +      <arg name="id" type="object" interface="wl_data_offer" allow-null="true"
> > +	   summary="selection data_offer object"/>
> >      </event>
> >  
> >      <!-- Version 2 additions -->
> > @@ -1230,7 +1232,7 @@
> >  	Ping a client to check if it is receiving events and sending
> >  	requests. A client is expected to reply with a pong request.
> >        </description>
> > -      <arg name="serial" type="uint"/>
> > +      <arg name="serial" type="uint" summary="serial number of the ping"/>
> >      </event>
> >  
> >      <event name="configure">
> > @@ -1254,9 +1256,9 @@
> >  	in surface-local coordinates.
> >        </description>
> >  
> > -      <arg name="edges" type="uint" enum="resize"/>
> > -      <arg name="width" type="int"/>
> > -      <arg name="height" type="int"/>
> > +      <arg name="edges" type="uint" enum="resize" summary="how the surface was resized"/>
> > +      <arg name="width" type="int" summary="new width of the surface"/>
> > +      <arg name="height" type="int" summary="new height of the surface"/>
> >      </event>
> >  
> >      <event name="popup_done">
> > @@ -1532,7 +1534,7 @@
> >  
> >  	Note that a surface may be overlapping with zero or more outputs.
> >        </description>
> > -      <arg name="output" type="object" interface="wl_output"/>
> > +      <arg name="output" type="object" interface="wl_output" summary="output entered by the surface"/>
> >      </event>
> >  
> >      <event name="leave">
> > @@ -1541,7 +1543,7 @@
> >  	results in it no longer having any part of it within the scanout region
> >  	of an output.
> >        </description>
> > -      <arg name="output" type="object" interface="wl_output"/>
> > +      <arg name="output" type="object" interface="wl_output" summary="output left by the surface"/>
> >      </event>
> >  
> >      <!-- Version 2 additions -->
> > @@ -1700,7 +1702,7 @@
> >  	The above behavior also applies to wl_keyboard and wl_touch with the
> >  	keyboard and touch capabilities, respectively.
> >        </description>
> > -      <arg name="capabilities" type="uint" enum="capability"/>
> > +      <arg name="capabilities" type="uint" enum="capability" summary="capabilities of the seat"/>
> >      </event>
> >  
> >      <request name="get_pointer">
> > @@ -1750,7 +1752,7 @@
> >  	identify which physical devices the seat represents. Based on
> >  	the seat configuration used by the compositor.
> >        </description>
> > -      <arg name="name" type="string"/>
> > +      <arg name="name" type="string" summary="seat identifier"/>
> >      </event>
> >  
> >      <!-- Version 5 additions -->
> > @@ -1831,8 +1833,8 @@
> >  	an appropriate pointer image with the set_cursor request.
> >        </description>
> >  
> > -      <arg name="serial" type="uint"/>
> > -      <arg name="surface" type="object" interface="wl_surface"/>
> > +      <arg name="serial" type="uint" summary="serial number of the enter event"/>
> > +      <arg name="surface" type="object" interface="wl_surface" summary="surface entered by the pointer"/>
> >        <arg name="surface_x" type="fixed" summary="surface-local x coordinate"/>
> >        <arg name="surface_y" type="fixed" summary="surface-local y coordinate"/>
> >      </event>
> > @@ -1845,8 +1847,8 @@
> >  	The leave notification is sent before the enter notification
> >  	for the new focus.
> >        </description>
> > -      <arg name="serial" type="uint"/>
> > -      <arg name="surface" type="object" interface="wl_surface"/>
> > +      <arg name="serial" type="uint" summary="serial number of the leave event"/>
> > +      <arg name="surface" type="object" interface="wl_surface" summary="surface left by the pointer"/>
> >      </event>
> >  
> >      <event name="motion">
> > @@ -1880,10 +1882,10 @@
> >          granularity, with an undefined base.
> >        </description>
> >  
> > -      <arg name="serial" type="uint"/>
> > +      <arg name="serial" type="uint" summary="serial number of the button event"/>
> >        <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
> > -      <arg name="button" type="uint"/>
> > -      <arg name="state" type="uint" enum="button_state"/>
> > +      <arg name="button" type="uint" summary="button that produced the event"/>
> > +      <arg name="state" type="uint" enum="button_state" summary="physical state of the button"/>
> >      </event>
> >  
> >      <enum name="axis">
> > @@ -1915,8 +1917,8 @@
> >        </description>
> >  
> >        <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
> > -      <arg name="axis" type="uint" enum="axis"/>
> > -      <arg name="value" type="fixed"/>
> > +      <arg name="axis" type="uint" enum="axis" summary="axis type"/>
> > +      <arg name="value" type="fixed" summary="length of vector in surface-local coordinate space"/>
> >      </event>
> >  
> >      <!-- Version 3 additions -->
> > @@ -2019,7 +2021,7 @@
> >  	The order of wl_pointer.axis_discrete and wl_pointer.axis_source is
> >  	not guaranteed.
> >        </description>
> > -      <arg name="axis_source" type="uint" enum="axis_source"/>
> > +      <arg name="axis_source" type="uint" enum="axis_source" summary="source of the axis event"/>
> >      </event>
> >  
> >      <event name="axis_stop" since="5">
> > @@ -2072,8 +2074,8 @@
> >  	The order of wl_pointer.axis_discrete and wl_pointer.axis_source is
> >  	not guaranteed.
> >        </description>
> > -      <arg name="axis" type="uint" enum="axis" />
> > -      <arg name="discrete" type="int"/>
> > +      <arg name="axis" type="uint" enum="axis" summary="axis type"/>
> > +      <arg name="discrete" type="int" summary="number of steps"/>
> >      </event>
> >    </interface>
> >  
> > @@ -2099,9 +2101,9 @@
> >  	This event provides a file descriptor to the client which can be
> >  	memory-mapped to provide a keyboard mapping description.
> >        </description>
> > -      <arg name="format" type="uint" enum="keymap_format"/>
> > -      <arg name="fd" type="fd"/>
> > -      <arg name="size" type="uint"/>
> > +      <arg name="format" type="uint" enum="keymap_format" summary="keymap format"/>
> > +      <arg name="fd" type="fd" summary="keymap file descriptor"/>
> > +      <arg name="size" type="uint" summary="keymap size, in bytes"/>
> >      </event>
> >  
> >      <event name="enter">
> > @@ -2109,8 +2111,8 @@
> >  	Notification that this seat's keyboard focus is on a certain
> >  	surface.
> >        </description>
> > -      <arg name="serial" type="uint"/>
> > -      <arg name="surface" type="object" interface="wl_surface"/>
> > +      <arg name="serial" type="uint" summary="serial number of the enter event"/>
> > +      <arg name="surface" type="object" interface="wl_surface" summary="surface gaining keyboard focus"/>
> >        <arg name="keys" type="array" summary="the currently pressed keys"/>
> >      </event>
> >  
> > @@ -2122,8 +2124,8 @@
> >  	The leave notification is sent before the enter notification
> >  	for the new focus.
> >        </description>
> > -      <arg name="serial" type="uint"/>
> > -      <arg name="surface" type="object" interface="wl_surface"/>
> > +      <arg name="serial" type="uint" summary="serial number of the leave event"/>
> > +      <arg name="surface" type="object" interface="wl_surface" summary="surface that lost keyboard focus"/>
> >      </event>
> >  
> >      <enum name="key_state">
> > @@ -2141,10 +2143,10 @@
> >          granularity, with an undefined base.
> >        </description>
> >  
> > -      <arg name="serial" type="uint"/>
> > +      <arg name="serial" type="uint" summary="serial number of the key event"/>
> >        <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
> > -      <arg name="key" type="uint"/>
> > -      <arg name="state" type="uint" enum="key_state"/>
> > +      <arg name="key" type="uint" summary="key that produced the event"/>
> > +      <arg name="state" type="uint" enum="key_state" summary="physical state of the key"/>
> >      </event>
> >  
> >      <event name="modifiers">
> > @@ -2153,11 +2155,11 @@
> >  	changed, and it should update its local state.
> >        </description>
> >  
> > -      <arg name="serial" type="uint"/>
> > -      <arg name="mods_depressed" type="uint"/>
> > -      <arg name="mods_latched" type="uint"/>
> > -      <arg name="mods_locked" type="uint"/>
> > -      <arg name="group" type="uint"/>
> > +      <arg name="serial" type="uint" summary="serial number of the modifiers event"/>
> > +      <arg name="mods_depressed" type="uint" summary="depressed modifiers"/>
> > +      <arg name="mods_latched" type="uint" summary="latched modifiers"/>
> > +      <arg name="mods_locked" type="uint" summary="locked modifiers"/>
> > +      <arg name="group" type="uint" summary="keyboard layout"/>
> >      </event>
> >  
> >      <!-- Version 3 additions -->
> > @@ -2210,9 +2212,9 @@
> >  	this ID. The ID ceases to be valid after a touch up event and may be
> >  	reused in the future.
> >        </description>
> > -      <arg name="serial" type="uint"/>
> > +      <arg name="serial" type="uint" summary="serial number of the touch down event"/>
> >        <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
> > -      <arg name="surface" type="object" interface="wl_surface"/>
> > +      <arg name="surface" type="object" interface="wl_surface" summary="surface touched"/>
> >        <arg name="id" type="int" summary="the unique ID of this touch point"/>
> >        <arg name="x" type="fixed" summary="surface-local x coordinate"/>
> >        <arg name="y" type="fixed" summary="surface-local y coordinate"/>
> > @@ -2224,7 +2226,7 @@
> >  	this touch point and the touch point's ID is released and may be
> >  	reused in a future touch down event.
> >        </description>
> > -      <arg name="serial" type="uint"/>
> > +      <arg name="serial" type="uint" summary="serial number of the touch up event"/>
> >        <arg name="time" type="uint" summary="timestamp with millisecond granularity"/>
> >        <arg name="id" type="int" summary="the unique ID of this touch point"/>
> >      </event>
> > -- 
> > 2.7.2
> > 
> > _______________________________________________
> > wayland-devel mailing list
> > wayland-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/wayland-devel
> _______________________________________________
> wayland-devel mailing list
> wayland-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/wayland-devel


More information about the wayland-devel mailing list