[PATCH weston v2 1/1] compositor-drm: Add support for EGLDevice+EGLOutput

Miguel A. Vico mvicomoya at nvidia.com
Wed May 18 15:54:12 UTC 2016


As previously stated, EGLDevice and EGLOutput will provide means
to access native device objects and different portions of display
control hardware respectively.

Whenever EGL_EXT_device_drm extension is present, EGLDevice can
be used to enumerate and access DRM KMS devices, and EGLOutputLayer
to enumerate and access DRM KMS crtcs and planes.

By using EGLStreams and attaching an EGLOutputLayer consumer
(representing a DRM KMS crtc or plane) to it, compositor-drm can
produce final composition frames and present them on a DRM device.

This change adds required logic to support presentation through
EGLDevice+EGLOutput+EGLStream. Whether GBM or EGLDevice should be
used can be controlled by --use-egldevice backend argument.

Signed-off-by: Miguel A Vico Moya <mvicomoya at nvidia.com>
Reviewed-by: Andy Ritger <aritger at nvidia.com>
Reviewed-by: Adam Cheney <acheney at nvidia.com>
Reviewed-by: James Jones <jajones at nvidia.com>
---
 src/compositor-drm.c | 326 ++++++++++++++++++++++++++++++++++++---------------
 src/compositor-drm.h |   4 +
 src/main.c           |   2 +
 3 files changed, 236 insertions(+), 96 deletions(-)

diff --git a/src/compositor-drm.c b/src/compositor-drm.c
index 03269b4..2c759f9 100644
--- a/src/compositor-drm.c
+++ b/src/compositor-drm.c
@@ -76,6 +76,10 @@
 #define GBM_BO_USE_CURSOR GBM_BO_USE_CURSOR_64X64
 #endif
 
+#ifndef EGL_DRM_MASTER_FD_EXT
+#define EGL_DRM_MASTER_FD_EXT 0x333C
+#endif
+
 struct drm_backend {
 	struct weston_backend base;
 	struct weston_compositor *compositor;
@@ -91,7 +95,10 @@ struct drm_backend {
 		int fd;
 		char *filename;
 	} drm;
+
+	EGLDeviceEXT egldevice;
 	struct gbm_device *gbm;
+
 	uint32_t *crtcs;
 	int num_crtcs;
 	uint32_t crtc_allocator;
@@ -114,6 +121,7 @@ struct drm_backend {
 	int cursors_are_broken;
 
 	int use_pixman;
+	int use_egldevice;
 
 	uint32_t prev_state;
 
@@ -523,17 +531,21 @@ drm_output_render_gl(struct drm_output *output, pixman_region32_t *damage)
 	output->base.compositor->renderer->repaint_output(&output->base,
 							  damage);
 
-	bo = gbm_surface_lock_front_buffer(output->gbm_surface);
-	if (!bo) {
-		weston_log("failed to lock front buffer: %m\n");
-		return;
-	}
+	if (b->use_egldevice)
+		output->next = output->dumb[0];
+	else {
+		bo = gbm_surface_lock_front_buffer(output->gbm_surface);
+		if (!bo) {
+			weston_log("failed to lock front buffer: %m\n");
+			return;
+		}
 
-	output->next = drm_fb_get_from_bo(bo, b, output->gbm_format);
-	if (!output->next) {
-		weston_log("failed to get drm_fb for bo\n");
-		gbm_surface_release_buffer(output->gbm_surface, bo);
-		return;
+		output->next = drm_fb_get_from_bo(bo, b, output->gbm_format);
+		if (!output->next) {
+			weston_log("failed to get drm_fb for bo\n");
+			gbm_surface_release_buffer(output->gbm_surface, bo);
+			return;
+		}
 	}
 }
 
@@ -658,9 +670,14 @@ drm_output_repaint(struct weston_output *output_base,
 		output_base->set_dpms(output_base, WESTON_DPMS_ON);
 	}
 
-	if (drmModePageFlip(backend->drm.fd, output->crtc_id,
-			    output->next->fb_id,
-			    DRM_MODE_PAGE_FLIP_EVENT, output) < 0) {
+	if (backend->use_egldevice)
+		ret = gl_renderer->output_stream_flip(&output->base, output);
+	else
+		ret = drmModePageFlip(backend->drm.fd, output->crtc_id,
+				      output->next->fb_id,
+				      DRM_MODE_PAGE_FLIP_EVENT, output);
+
+	if (ret < 0) {
 		weston_log("queueing pageflip failed: %m\n");
 		goto err_pageflip;
 	}
@@ -731,7 +748,6 @@ drm_output_start_repaint_loop(struct weston_output *output_base)
 	struct drm_output *output = (struct drm_output *) output_base;
 	struct drm_backend *backend = (struct drm_backend *)
 		output_base->compositor->backend;
-	uint32_t fb_id;
 	struct timespec ts, tnow;
 	struct timespec vbl2now;
 	int64_t refresh_nsec;
@@ -787,10 +803,14 @@ drm_output_start_repaint_loop(struct weston_output *output_base)
 	/* Immediate query succeeded, but didn't provide valid timestamp.
 	 * Use pageflip fallback.
 	 */
-	fb_id = output->current->fb_id;
+	if (backend->use_egldevice)
+		ret = gl_renderer->output_stream_flip(&output->base, output);
+	else
+		ret = drmModePageFlip(backend->drm.fd, output->crtc_id,
+				      output->current->fb_id,
+				      DRM_MODE_PAGE_FLIP_EVENT, output);
 
-	if (drmModePageFlip(backend->drm.fd, output->crtc_id, fb_id,
-			    DRM_MODE_PAGE_FLIP_EVENT, output) < 0) {
+	if (ret < 0) {
 		weston_log("queueing pageflip failed: %m\n");
 		goto finish_frame;
 	}
@@ -1324,6 +1344,9 @@ static void
 drm_output_fini_pixman(struct drm_output *output);
 
 static void
+drm_output_fini_egl(struct drm_output *output);
+
+static void
 drm_output_destroy(struct weston_output *output_base)
 {
 	struct drm_output *output = (struct drm_output *) output_base;
@@ -1354,12 +1377,10 @@ drm_output_destroy(struct weston_output *output_base)
 	b->crtc_allocator &= ~(1 << output->crtc_id);
 	b->connector_allocator &= ~(1 << output->connector_id);
 
-	if (b->use_pixman) {
+	if (b->use_pixman)
 		drm_output_fini_pixman(output);
-	} else {
-		gl_renderer->output_destroy(output_base);
-		gbm_surface_destroy(output->gbm_surface);
-	}
+	else
+		drm_output_fini_egl(output);
 
 	weston_plane_release(&output->fb_plane);
 	weston_plane_release(&output->cursor_plane);
@@ -1458,9 +1479,7 @@ drm_output_switch_mode(struct weston_output *output_base, struct weston_mode *mo
 			return -1;
 		}
 	} else {
-		gl_renderer->output_destroy(&output->base);
-		gbm_surface_destroy(output->gbm_surface);
-
+		drm_output_fini_egl(output);
 		if (drm_output_init_egl(output, b) < 0) {
 			weston_log("failed to init output egl state with "
 				   "new mode");
@@ -1547,11 +1566,6 @@ create_gbm_device(int fd)
 {
 	struct gbm_device *gbm;
 
-	gl_renderer = weston_load_module("gl-renderer.so",
-					 "gl_renderer_interface");
-	if (!gl_renderer)
-		return NULL;
-
 	/* GBM will load a dri driver, but even though they need symbols from
 	 * libglapi, in some version of Mesa they are not linked to it. Since
 	 * only the gl-renderer module links to it, the call above won't make
@@ -1564,6 +1578,40 @@ create_gbm_device(int fd)
 	return gbm;
 }
 
+static EGLDeviceEXT
+find_egldevice(const char *filename)
+{
+	EGLDeviceEXT egldevice = EGL_NO_DEVICE_EXT;
+	EGLDeviceEXT *devices;
+	EGLint num_devices;
+	const char *drm_path;
+	int i;
+
+	if (gl_renderer->get_devices(0, NULL, &num_devices) < 0 ||
+	    num_devices < 1)
+		return EGL_NO_DEVICE_EXT;
+
+	devices = zalloc(num_devices * sizeof *devices);
+	if (!devices)
+		return EGL_NO_DEVICE_EXT;
+
+	if (gl_renderer->get_devices(num_devices, devices, &num_devices) < 0) {
+		free(devices);
+		return EGL_NO_DEVICE_EXT;
+	}
+
+	for (i = 0; i < num_devices; i++)
+		if (gl_renderer->get_drm_device_file(devices[i],
+						     &drm_path) == 0 &&
+		    strcmp(filename, drm_path) == 0) {
+			egldevice = devices[i];
+			break;
+		}
+
+	free(devices);
+	return egldevice;
+}
+
 /* When initializing EGL, if the preferred buffer format isn't available
  * we may be able to substitute an ARGB format for an XRGB one.
  *
@@ -1590,38 +1638,62 @@ fallback_format_for(uint32_t format)
 static int
 drm_backend_create_gl_renderer(struct drm_backend *b)
 {
-	EGLint format[3] = {
-		b->gbm_format,
-		fallback_format_for(b->gbm_format),
-		0,
-	};
-	int n_formats = 2;
+	if (b->use_egldevice) {
+		EGLint device_platform_attribs[] = {
+			EGL_DRM_MASTER_FD_EXT, b->drm.fd,
+			EGL_NONE
+		};
 
-	if (format[1])
-		n_formats = 3;
-	if (gl_renderer->display_create(b->compositor,
-					EGL_PLATFORM_GBM_KHR,
-					(void *)b->gbm,
+		return gl_renderer->display_create(
+					b->compositor,
+					EGL_PLATFORM_DEVICE_EXT,
+					(void *)b->egldevice,
+					device_platform_attribs,
+					gl_renderer->opaque_stream_attribs,
 					NULL,
-					gl_renderer->opaque_attribs,
-					format,
-					n_formats) < 0) {
-		return -1;
-	}
+					0);
+	} else {
+		EGLint format[3] = {
+			b->gbm_format,
+			fallback_format_for(b->gbm_format),
+			0,
+		};
+		int n_formats = 2;
 
-	return 0;
+		if (format[1])
+			n_formats = 3;
+
+		return gl_renderer->display_create(b->compositor,
+						   EGL_PLATFORM_GBM_KHR,
+						   (void *)b->gbm,
+						   NULL,
+						   gl_renderer->opaque_attribs,
+						   format,
+						   n_formats);
+	}
 }
 
 static int
 init_egl(struct drm_backend *b)
 {
-	b->gbm = create_gbm_device(b->drm.fd);
-
-	if (!b->gbm)
+	gl_renderer = weston_load_module("gl-renderer.so",
+					 "gl_renderer_interface");
+	if (!gl_renderer)
 		return -1;
 
+	if (b->use_egldevice) {
+		b->egldevice = find_egldevice(b->drm.filename);
+		if (b->egldevice == EGL_NO_DEVICE_EXT)
+			return -1;
+	} else {
+		b->gbm = create_gbm_device(b->drm.fd);
+		if (!b->gbm)
+			return -1;
+	}
+
 	if (drm_backend_create_gl_renderer(b) < 0) {
-		gbm_device_destroy(b->gbm);
+		if (b->gbm)
+			gbm_device_destroy(b->gbm);
 		return -1;
 	}
 
@@ -1848,55 +1920,101 @@ find_crtc_for_connector(struct drm_backend *b,
 static int
 drm_output_init_egl(struct drm_output *output, struct drm_backend *b)
 {
-	EGLint format[2] = {
-		output->gbm_format,
-		fallback_format_for(output->gbm_format),
-	};
-	int i, flags, n_formats = 1;
-
-	output->gbm_surface = gbm_surface_create(b->gbm,
-					     output->base.current_mode->width,
-					     output->base.current_mode->height,
-					     format[0],
-					     GBM_BO_USE_SCANOUT |
-					     GBM_BO_USE_RENDERING);
-	if (!output->gbm_surface) {
-		weston_log("failed to create gbm surface\n");
-		return -1;
-	}
+	if (b->use_egldevice) {
+		int w = output->base.current_mode->width;
+		int h = output->base.current_mode->height;
 
-	if (format[1])
-		n_formats = 2;
-	if (gl_renderer->output_window_create(&output->base,
-					      (EGLNativeWindowType)output->gbm_surface,
-					      output->gbm_surface,
-					      gl_renderer->opaque_attribs,
-					      format,
-					      n_formats) < 0) {
-		weston_log("failed to create gl renderer output state\n");
-		gbm_surface_destroy(output->gbm_surface);
-		return -1;
-	}
+		/* Create a black dumb fb for modesetting */
+		output->dumb[0] = drm_fb_create_dumb(b, w, h);
+		if (!output->dumb[0]) {
+			weston_log("failed to create dumb framebuffer\n");
+			return -1;
+		}
+		memset(output->dumb[0]->map, 0, output->dumb[0]->size);
+
+		if (gl_renderer->output_stream_create(&output->base, ~0u,
+						      output->crtc_id) < 0) {
+			weston_log("failed to create gl renderer output stream "
+				   "state\n");
+			drm_fb_destroy_dumb(output->dumb[0]);
+			output->dumb[0] = NULL;
+			return -1;
+		}
 
-	flags = GBM_BO_USE_CURSOR | GBM_BO_USE_WRITE;
+		/* FIXME: Add hw planes and cursors for EGL device when supported */
+		b->sprites_are_broken = 1;
+		b->cursors_are_broken = 1;
+	} else {
+		EGLint format[2] = {
+			output->gbm_format,
+			fallback_format_for(output->gbm_format),
+		};
+		int i, flags, n_formats = 1;
+
+		output->gbm_surface = gbm_surface_create(
+					b->gbm,
+					output->base.current_mode->width,
+					output->base.current_mode->height,
+					format[0],
+					GBM_BO_USE_SCANOUT |
+					GBM_BO_USE_RENDERING);
+		if (!output->gbm_surface) {
+			weston_log("failed to create gbm surface\n");
+			return -1;
+		}
 
-	for (i = 0; i < 2; i++) {
-		if (output->gbm_cursor_bo[i])
-			continue;
+		if (format[1])
+			n_formats = 2;
+		if (gl_renderer->output_window_create(
+				&output->base,
+				(EGLNativeWindowType)output->gbm_surface,
+				output->gbm_surface,
+				gl_renderer->opaque_attribs,
+				format,
+				n_formats) < 0) {
+			weston_log("failed to create gl renderer output "
+				   "state\n");
+			gbm_surface_destroy(output->gbm_surface);
+			return -1;
+		}
 
-		output->gbm_cursor_bo[i] =
-			gbm_bo_create(b->gbm, b->cursor_width, b->cursor_height,
-				GBM_FORMAT_ARGB8888, flags);
-	}
+		flags = GBM_BO_USE_CURSOR | GBM_BO_USE_WRITE;
 
-	if (output->gbm_cursor_bo[0] == NULL || output->gbm_cursor_bo[1] == NULL) {
-		weston_log("cursor buffers unavailable, using gl cursors\n");
-		b->cursors_are_broken = 1;
+		for (i = 0; i < 2; i++) {
+			if (output->gbm_cursor_bo[i])
+				continue;
+
+			output->gbm_cursor_bo[i] =
+				gbm_bo_create(b->gbm,
+					      b->cursor_width,
+					      b->cursor_height,
+					      GBM_FORMAT_ARGB8888,
+					      flags);
+		}
+
+		if (output->gbm_cursor_bo[0] == NULL || output->gbm_cursor_bo[1] == NULL) {
+			weston_log("cursor buffers unavailable, using gl cursors\n");
+			b->cursors_are_broken = 1;
+		}
 	}
 
 	return 0;
 }
 
+static void
+drm_output_fini_egl(struct drm_output *output)
+{
+	gl_renderer->output_destroy(&output->base);
+
+	if (output->dumb[0]) {
+		drm_fb_destroy_dumb(output->dumb[0]);
+		output->dumb[0] = NULL;
+	}
+
+	if (output->gbm_surface)
+		gbm_surface_destroy(output->gbm_surface);
+}
+
 static int
 drm_output_init_pixman(struct drm_output *output, struct drm_backend *b)
 {
@@ -2957,6 +3075,11 @@ recorder_binding(struct weston_keyboard *keyboard, uint32_t time, uint32_t key,
 	struct drm_output *output;
 	int width, height;
 
+	if (b->use_egldevice) {
+		weston_log("recorder not supported with EGL device\n");
+		return;
+	}
+
 	output = container_of(b->compositor->output_list.next,
 			      struct drm_output, base.link);
 
@@ -3012,11 +3135,20 @@ switch_to_gl_renderer(struct drm_backend *b)
 
 	weston_log("Switching to GL renderer\n");
 
-	b->gbm = create_gbm_device(b->drm.fd);
-	if (!b->gbm) {
-		weston_log("Failed to create gbm device. "
-			   "Aborting renderer switch\n");
-		return;
+	if (b->use_egldevice) {
+		b->egldevice = find_egldevice(b->drm.filename);
+		if (b->egldevice == EGL_NO_DEVICE_EXT) {
+			weston_log("Failed to create EGL device. "
+				   "Aborting renderer switch\n");
+			return;
+		}
+	} else {
+		b->gbm = create_gbm_device(b->drm.fd);
+		if (!b->gbm) {
+			weston_log("Failed to create gbm device. "
+				   "Aborting renderer switch\n");
+			return;
+		}
 	}
 
 	wl_list_for_each(output, &b->compositor->output_list, base.link)
@@ -3025,7 +3157,8 @@ switch_to_gl_renderer(struct drm_backend *b)
 	b->compositor->renderer->destroy(b->compositor);
 
 	if (drm_backend_create_gl_renderer(b) < 0) {
-		gbm_device_destroy(b->gbm);
+		if (b->gbm)
+			gbm_device_destroy(b->gbm);
 		weston_log("Failed to create GL renderer. Quitting.\n");
 		/* FIXME: we need a function to shutdown cleanly */
 		assert(0);
@@ -3082,6 +3215,7 @@ drm_backend_create(struct weston_compositor *compositor,
 	b->sprites_are_broken = 1;
 	b->compositor = compositor;
 	b->use_pixman = config->use_pixman;
+	b->use_egldevice = config->use_egldevice;
 	b->configure_output = config->configure_output;
 	b->use_current_mode = config->use_current_mode;
 
diff --git a/src/compositor-drm.h b/src/compositor-drm.h
index 3f150db..eaa735a 100644
--- a/src/compositor-drm.h
+++ b/src/compositor-drm.h
@@ -87,6 +87,10 @@ struct weston_drm_backend_config {
 	/** Whether to use the pixman renderer instead of the OpenGL ES renderer. */
 	bool use_pixman;
 
+	/** Whether to use the GL composition based off EGLDevice & friends instead
+	 * of GBM. */
+	bool use_egldevice;
+
 	/** The seat to be used for input and output.
 	 *
 	 * If NULL the default "seat0" will be used.  The backend will
diff --git a/src/main.c b/src/main.c
index 3279ac6..ad1a1fc 100644
--- a/src/main.c
+++ b/src/main.c
@@ -277,6 +277,7 @@ usage(int error_code)
 		"  --seat=SEAT\t\tThe seat that weston should run on\n"
 		"  --tty=TTY\t\tThe tty to use\n"
 		"  --use-pixman\t\tUse the pixman (CPU) renderer\n"
+		"  --use-egldevice\tUse EGLDevice and EGLOutput with the GL renderer\n"
 		"  --current-mode\tPrefer current KMS mode over EDID preferred mode\n\n");
 #endif
 
@@ -750,6 +751,7 @@ load_drm_backend(struct weston_compositor *c, const char *backend,
 		{ WESTON_OPTION_INTEGER, "tty", 0, &config.tty },
 		{ WESTON_OPTION_BOOLEAN, "current-mode", 0, &config.use_current_mode },
 		{ WESTON_OPTION_BOOLEAN, "use-pixman", 0, &config.use_pixman },
+		{ WESTON_OPTION_BOOLEAN, "use-egldevice", 0, &config.use_egldevice },
 	};
 
 	parse_options(options, ARRAY_LENGTH(options), argc, argv);
-- 
2.8.0



More information about the wayland-devel mailing list