[PATCH wayland-protocols v3 7/7] xdg-shell: Introduce xdg_positioner
Jonas Ådahl
jadahl at gmail.com
Thu May 26 04:32:58 UTC 2016
xdg_positioner is a method for declarative positioning of child surfaces
(currently only xdg_popup surfaces). A client creates a description of a
positioning logic using the xdg_positioner interface. The xdg_positioner
object is then used when creating a xdg_popup for describing how the
child surface should be positioned in relation to the parent surface.
Signed-off-by: Jonas Ådahl <jadahl at gmail.com>
Signed-off-by: Mike Blumenkrantz <zmike at samsung.com>
---
Changes since v2:
- Grammar, typos and spelling fixes
- Reordered enum values to be the same as already present similar enum
- Added enum attribute to relevant requests
unstable/xdg-shell/xdg-shell-unstable-v6.xml | 252 ++++++++++++++++++++++++++-
1 file changed, 249 insertions(+), 3 deletions(-)
diff --git a/unstable/xdg-shell/xdg-shell-unstable-v6.xml b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
index 07cbbc9..1baafa7 100644
--- a/unstable/xdg-shell/xdg-shell-unstable-v6.xml
+++ b/unstable/xdg-shell/xdg-shell-unstable-v6.xml
@@ -45,6 +45,8 @@
summary="the client specified an invalid popup parent surface"/>
<entry name="invalid_surface_state" value="4"
summary="the client provided an invalid surface state"/>
+ <entry name="invalid_positioner" value="5"
+ summary="the client provided an invalid positioner"/>
</enum>
<request name="destroy" type="destructor">
@@ -57,6 +59,15 @@
</description>
</request>
+ <request name="create_positioner">
+ <description summary="create a positioner object">
+ Create a positioner object. A positioner object is used to position
+ surfaces relative to some parent surface. See the interface description
+ and xdg_surface.get_popup for details.
+ </description>
+ <arg name="id" type="new_id" interface="zxdg_positioner_v6"/>
+ </request>
+
<request name="get_xdg_surface">
<description summary="create a shell surface from a surface">
This creates an xdg_surface for the given surface. While xdg_surface
@@ -96,6 +107,225 @@
</event>
</interface>
+ <interface name="zxdg_positioner_v6" version="1">
+ <description summary="child surface positioner">
+ The xdg_positioner provides an interface for constructing positioning
+ rules used for positioning a child surface relative to a parent surface
+ in a certain way. It allows methods for defining a rule that will make
+ the child surface stay within the border of the visible area of the
+ screen, with different ways in which the child surface should change
+ its position, including sliding along an axis, or flipping around a
+ rectangle.
+
+ See the various requests for details about possible rules.
+
+ Semantically, an xdg_positioner is a collection of positioning rules. When
+ used for positioning a surface, for example when passed as an argument to
+ xdg_surface.get_popup, the compositor copies the rules that were set up at
+ the time of the request. Making any changes or destroying the object after
+ it was used has no effect on previous usages.
+
+ For an xdg_positioner object to be considered complete, it must have a
+ non-zero size set by set_size, and a non-zero anchor rectangle set by
+ set_anchor_rect. Passing an incomplete xdg_positioner object when
+ positioning a surface raises an error.
+ </description>
+
+ <enum name="error">
+ <entry name="invalid_input" value="0" summary="invalid input provided"/>
+ </enum>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy the xdg_positioner object">
+ Notify the compositor that the xdg_positioner will no longer be used.
+ </description>
+ </request>
+
+ <request name="set_size">
+ <description summary="set the size of the to-be positioned rectangle">
+ Set the size of the surface that is to be positioned with the positioner
+ object. The size is in surface-local coordinates and corresponds to the
+ window geometry. See xdg_surface.set_window_geometry.
+
+ If a zero or negative size is set the invalid_input error is raised.
+ </description>
+ <arg name="width" type="int" summary="width of positioned rectangle"/>
+ <arg name="height" type="int" summary="height of positioned rectangle"/>
+ </request>
+
+ <request name="set_anchor_rect">
+ <description summary="set the anchor rectangle within the parent surface">
+ Specify the anchor rectangle within the parent surface that the child
+ surface will be placed relative to. The rectangle is relative to the
+ window geometry as defined by xdg_surface.set_window_geometry of the
+ parent surface. The rectangle must be at least 1x1 large.
+
+ When the xdg_positioner object is used to position a child surface, the
+ anchor rectangle may not extend outside the window geometry of the
+ positioned child's parent surface.
+
+ If a zero or negative size is set the invalid_input error is raised.
+ </description>
+ <arg name="x" type="int" summary="x position of anchor rectangle"/>
+ <arg name="y" type="int" summary="y position of anchor rectangle"/>
+ <arg name="width" type="int" summary="width of anchor rectangle"/>
+ <arg name="height" type="int" summary="height of anchor rectangle"/>
+ </request>
+
+ <enum name="anchor" bitfield="true">
+ <entry name="none" value="0"
+ summary="the center of the anchor rectangle"/>
+ <entry name="top" value="1"
+ summary="the top edge of the anchor rectangle"/>
+ <entry name="bottom" value="2"
+ summary="the bottom edge of the anchor rectangle"/>
+ <entry name="left" value="4"
+ summary="the left edge of the anchor rectangle"/>
+ <entry name="right" value="8"
+ summary="the right edge of the anchor rectangle"/>
+ </enum>
+
+ <request name="set_anchor">
+ <description summary="set anchor rectangle anchor edges">
+ Set the anchor edges of the anchor rectangle. The anchor edges define
+ where on the anchor rectangle the child surface should be positioned
+ relative to. An anchor is a bit mask of up to two values of the anchor
+ enum.
+
+ If two values on the same axis (for example left and right) are set the
+ invalid_input error is raised.
+
+ If no anchor is set on any axis, the anchor position will be positioned
+ at the center of the anchor rectangle on the unset axis. The default
+ value is "none".
+ </description>
+ <arg name="anchor" type="uint" enum="anchor"
+ summary="bit mask of anchor edges"/>
+ </request>
+
+ <enum name="gravity" bitfield="true">
+ <entry name="none" value="0"
+ summary="center over the anchor edge"/>
+ <entry name="top" value="1"
+ summary="position above the anchor edge"/>
+ <entry name="bottom" value="2"
+ summary="position below the anchor edge"/>
+ <entry name="left" value="4"
+ summary="position to the left of the anchor edge"/>
+ <entry name="right" value="8"
+ summary="position to the right of the anchor edge"/>
+ </enum>
+
+ <request name="set_gravity">
+ <description summary="set child surface gravity">
+ The gravity defines in what direction a surface would be positioned,
+ relative to the anchor edges on the parent surface. A gravity is a
+ bit mask of up to two values of the gravity enum.
+
+ If two values on the same axis (for example left and right) are set the
+ invalid_input error is raised.
+
+ If no gravity is set on an axis, the gravity for that axis will be
+ equivalent to setting "none" for that axis, resulting in the child being
+ centered over the anchor edges on that axis.
+ </description>
+ <arg name="gravity" type="uint" enum="gravity"
+ summary="bit mask of gravity directions"/>
+ </request>
+
+ <enum name="constrain_adjustment" bitfield="true">
+ <entry name="none" value="0">
+ <description summary="don't move the child surface when constrained">
+ Don't alter the surface position even if it is constrained on some
+ axis, for example partially outside the edge of a monitor.
+ </description>
+ </entry>
+ <entry name="slide_x" value="1">
+ <description summary="move along the x axis until unconstrained">
+ Slide the surface along the x axis until it is no longer constrained.
+
+ First try to slide towards the direction of the gravity on the x axis
+ until either the edge in the opposite direction of the gravity is
+ unconstrained or the edge in the direction of the gravity is
+ constrained.
+
+ Then try to slide towards the opposite direction of the gravity on the
+ x axis until either the edge in the direction of the gravity is
+ unconstrained or the edge in the opposite direction of the gravity is
+ constrained.
+ </description>
+ </entry>
+ <entry name="slide_y" value="2">
+ <description summary="move along the y axis until unconstrained">
+ Slide the surface along the y axis until it is no longer constrained.
+
+ First try to slide towards the direction of the gravity on the y axis
+ until either the edge in the opposite direction of the gravity is
+ unconstrained or the edge in the direction of the gravity is
+ constrained.
+
+ Then try to slide towards the opposite direction of the gravity on the
+ y axis until either the edge in the direction of the gravity is
+ unconstrained or the edge in the opposite direction of the gravity is
+ constrained.
+ </description>
+ </entry>
+ <entry name="flip_x" value="4">
+ <description summary="invert the anchor and gravity on the x axis">
+ Invert the anchor and gravity on the x axis if the surface is
+ constrained on the x axis. For example, if the left edge of the
+ surface is constrained, the gravity is 'left' and the anchor is
+ 'left', change the gravity to 'right' and the anchor to 'right'. If
+ the resulting position after inverting ends up also being constrained,
+ the behaviour is undefined.
+ </description>
+ </entry>
+ <entry name="flip_y" value="8">
+ <description summary="invert the anchor and gravity on the y axis">
+ Invert the anchor and gravity on the y axis if the surface is
+ constrained on the y axis. For example, if the bottom edge of the
+ surface is constrained, the gravity is 'bottom' and the anchor is
+ 'bottom', change the gravity to 'top' and the anchor to 'top'. If
+ the resulting position after inverting ends up also being constrained,
+ the behaviour is undefined.
+ </description>
+ </entry>
+ </enum>
+
+ <request name="set_constrain_adjustment">
+ <description summary="set the adjustment to be done when constrained">
+ Specify how the window should be positioned if the originally intended
+ position caused the surface to be constrained, meaning at least
+ partially outside positioning boundaries set by the compositor. The
+ adjustment is set by constructing a bitmask with one bit per axis set
+ describing the adjustment to be made when the surface is constrained on
+ that axis. If no bit for one axis is set, the compositor will assume
+ that the child surface should not change its position on that axis when
+ constrained. The default adjustment is none.
+ </description>
+ <arg name="constrain_adjustment" type="uint"
+ summary="bit mask of constrain adjustments"/>
+ </request>
+
+ <request name="set_offset">
+ <description summary="set surface position offset">
+ Specify the surface position offset relative to the position of the
+ anchor on the anchor rectangle and the anchor on the surface. For
+ example if the anchor of the anchor rectangle is at (x, y), the surface
+ has the gravity bottom|right, and the offset is (ox, oy), the calculated
+ surface position will be (x + ox, y + oy). The offset position of the
+ surface is the one used for constraint testing. See
+ set_constrain_adjustment.
+
+ An example use case is placing a popup menu on top of a user interface
+ element, while aligning the user interface element of the parent surface
+ with some user interface element placed somewhere in the popup surface.
+ </description>
+ <arg name="x" type="int" summary="surface position x offset"/>
+ <arg name="y" type="int" summary="surface position y offset"/>
+ </request>
+ </interface>
+
<interface name="zxdg_surface_v6" version="1">
<description summary="desktop user interface surface base interface">
An interface that may be implemented by a wl_surface, for
@@ -163,8 +393,7 @@
</description>
<arg name="id" type="new_id" interface="zxdg_popup_v6"/>
<arg name="parent" type="object" interface="zxdg_surface_v6"/>
- <arg name="x" type="int"/>
- <arg name="y" type="int"/>
+ <arg name="positioner" type="object" interface="zxdg_positioner_v6"/>
</request>
<request name="set_window_geometry">
@@ -724,7 +953,7 @@
button press, key press, or touch down event. The serial number of the
event should be passed as 'serial'.
- The parent of a grabbing popup must either be a xdg_toplevel surface or
+ The parent of a grabbing popup must either be an xdg_toplevel surface or
another xdg_popup with an explicit grab. If the parent is another
xdg_popup it means that the popups are nested, with this popup now being
the topmost popup.
@@ -759,6 +988,23 @@
<arg name="serial" type="uint" summary="the serial of the user event"/>
</request>
+ <event name="configure">
+ <description summary="configure the popup surface">
+ This event asks the popup surface to configure itself given the
+ configuration. It is not sent by itself but is as a latched state prior
+ to the xdg_surface.configure event. See xdg_surface.configure for
+ details.
+
+ The x and y arguments represent the position the popup was placed at
+ given the xdg_positioner rule, relative to the upper left corner of the
+ window geometry of the parent surface.
+ </description>
+ <arg name="x" type="int"
+ summary="x position relative to parent surface window geometry"/>
+ <arg name="y" type="int"
+ summary="y position relative to parent surface window geometry"/>
+ </event>
+
<event name="popup_done">
<description summary="popup interaction is done">
The popup_done event is sent out when a popup is dismissed by the
--
2.5.5
More information about the wayland-devel
mailing list