[PATCH wayland-protocols v3 01/17] Add xdg-shell to stable/
Jonas Ådahl
jadahl at gmail.com
Wed Nov 15 11:19:50 UTC 2017
Add a copy of xdg-shell unstable v6 to stable/xdg-shell/xdg-shell.xml.
Folliwing this commit, it will go through a set of changes, before
being declared stable.
Signed-off-by: Jonas Ådahl <jadahl at gmail.com>
---
stable/xdg-shell/README | 5 +
stable/xdg-shell/xdg-shell.xml | 1044 ++++++++++++++++++++++++++++++++++++++++
2 files changed, 1049 insertions(+)
create mode 100644 stable/xdg-shell/README
create mode 100644 stable/xdg-shell/xdg-shell.xml
diff --git a/stable/xdg-shell/README b/stable/xdg-shell/README
new file mode 100644
index 0000000..2769abb
--- /dev/null
+++ b/stable/xdg-shell/README
@@ -0,0 +1,5 @@
+xdg shell protocol
+
+Maintainers:
+Jonas Ådahl <jadahl at gmail.com>
+Mike Blumenkrantz <zmike at osg.samsung.com>
diff --git a/stable/xdg-shell/xdg-shell.xml b/stable/xdg-shell/xdg-shell.xml
new file mode 100644
index 0000000..1c0f924
--- /dev/null
+++ b/stable/xdg-shell/xdg-shell.xml
@@ -0,0 +1,1044 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<protocol name="xdg_shell_unstable_v6">
+
+ <copyright>
+ Copyright © 2008-2013 Kristian Høgsberg
+ Copyright © 2013 Rafael Antognolli
+ Copyright © 2013 Jasper St. Pierre
+ Copyright © 2010-2013 Intel Corporation
+
+ Permission is hereby granted, free of charge, to any person obtaining a
+ copy of this software and associated documentation files (the "Software"),
+ to deal in the Software without restriction, including without limitation
+ the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ and/or sell copies of the Software, and to permit persons to whom the
+ Software is furnished to do so, subject to the following conditions:
+
+ The above copyright notice and this permission notice (including the next
+ paragraph) shall be included in all copies or substantial portions of the
+ Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ DEALINGS IN THE SOFTWARE.
+ </copyright>
+
+ <interface name="zxdg_shell_v6" version="1">
+ <description summary="create desktop-style surfaces">
+ xdg_shell allows clients to turn a wl_surface into a "real window"
+ which can be dragged, resized, stacked, and moved around by the
+ user. Everything about this interface is suited towards traditional
+ desktop environments.
+ </description>
+
+ <enum name="error">
+ <entry name="role" value="0" summary="given wl_surface has another role"/>
+ <entry name="defunct_surfaces" value="1"
+ summary="xdg_shell was destroyed before children"/>
+ <entry name="not_the_topmost_popup" value="2"
+ summary="the client tried to map or destroy a non-topmost popup"/>
+ <entry name="invalid_popup_parent" value="3"
+ summary="the client specified an invalid popup parent surface"/>
+ <entry name="invalid_surface_state" value="4"
+ summary="the client provided an invalid surface state"/>
+ <entry name="invalid_positioner" value="5"
+ summary="the client provided an invalid positioner"/>
+ </enum>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy xdg_shell">
+ Destroy this xdg_shell object.
+
+ Destroying a bound xdg_shell object while there are surfaces
+ still alive created by this xdg_shell object instance is illegal
+ and will result in a protocol error.
+ </description>
+ </request>
+
+ <request name="create_positioner">
+ <description summary="create a positioner object">
+ Create a positioner object. A positioner object is used to position
+ surfaces relative to some parent surface. See the interface description
+ and xdg_surface.get_popup for details.
+ </description>
+ <arg name="id" type="new_id" interface="zxdg_positioner_v6"/>
+ </request>
+
+ <request name="get_xdg_surface">
+ <description summary="create a shell surface from a surface">
+ This creates an xdg_surface for the given surface. While xdg_surface
+ itself is not a role, the corresponding surface may only be assigned
+ a role extending xdg_surface, such as xdg_toplevel or xdg_popup.
+
+ This creates an xdg_surface for the given surface. An xdg_surface is
+ used as basis to define a role to a given surface, such as xdg_toplevel
+ or xdg_popup. It also manages functionality shared between xdg_surface
+ based surface roles.
+
+ See the documentation of xdg_surface for more details about what an
+ xdg_surface is and how it is used.
+ </description>
+ <arg name="id" type="new_id" interface="zxdg_surface_v6"/>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ </request>
+
+ <request name="pong">
+ <description summary="respond to a ping event">
+ A client must respond to a ping event with a pong request or
+ the client may be deemed unresponsive. See xdg_shell.ping.
+ </description>
+ <arg name="serial" type="uint" summary="serial of the ping event"/>
+ </request>
+
+ <event name="ping">
+ <description summary="check if the client is alive">
+ The ping event asks the client if it's still alive. Pass the
+ serial specified in the event back to the compositor by sending
+ a "pong" request back with the specified serial. See xdg_shell.ping.
+
+ Compositors can use this to determine if the client is still
+ alive. It's unspecified what will happen if the client doesn't
+ respond to the ping request, or in what timeframe. Clients should
+ try to respond in a reasonable amount of time.
+
+ A compositor is free to ping in any way it wants, but a client must
+ always respond to any xdg_shell object it created.
+ </description>
+ <arg name="serial" type="uint" summary="pass this to the pong request"/>
+ </event>
+ </interface>
+
+ <interface name="zxdg_positioner_v6" version="1">
+ <description summary="child surface positioner">
+ The xdg_positioner provides a collection of rules for the placement of a
+ child surface relative to a parent surface. Rules can be defined to ensure
+ the child surface remains within the visible area's borders, and to
+ specify how the child surface changes its position, such as sliding along
+ an axis, or flipping around a rectangle. These positioner-created rules are
+ constrained by the requirement that a child surface must intersect with or
+ be at least partially adjacent to its parent surface.
+
+ See the various requests for details about possible rules.
+
+ At the time of the request, the compositor makes a copy of the rules
+ specified by the xdg_positioner. Thus, after the request is complete the
+ xdg_positioner object can be destroyed or reused; further changes to the
+ object will have no effect on previous usages.
+
+ For an xdg_positioner object to be considered complete, it must have a
+ non-zero size set by set_size, and a non-zero anchor rectangle set by
+ set_anchor_rect. Passing an incomplete xdg_positioner object when
+ positioning a surface raises an error.
+ </description>
+
+ <enum name="error">
+ <entry name="invalid_input" value="0" summary="invalid input provided"/>
+ </enum>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy the xdg_positioner object">
+ Notify the compositor that the xdg_positioner will no longer be used.
+ </description>
+ </request>
+
+ <request name="set_size">
+ <description summary="set the size of the to-be positioned rectangle">
+ Set the size of the surface that is to be positioned with the positioner
+ object. The size is in surface-local coordinates and corresponds to the
+ window geometry. See xdg_surface.set_window_geometry.
+
+ If a zero or negative size is set the invalid_input error is raised.
+ </description>
+ <arg name="width" type="int" summary="width of positioned rectangle"/>
+ <arg name="height" type="int" summary="height of positioned rectangle"/>
+ </request>
+
+ <request name="set_anchor_rect">
+ <description summary="set the anchor rectangle within the parent surface">
+ Specify the anchor rectangle within the parent surface that the child
+ surface will be placed relative to. The rectangle is relative to the
+ window geometry as defined by xdg_surface.set_window_geometry of the
+ parent surface. The rectangle must be at least 1x1 large.
+
+ When the xdg_positioner object is used to position a child surface, the
+ anchor rectangle may not extend outside the window geometry of the
+ positioned child's parent surface.
+
+ If a zero or negative size is set the invalid_input error is raised.
+ </description>
+ <arg name="x" type="int" summary="x position of anchor rectangle"/>
+ <arg name="y" type="int" summary="y position of anchor rectangle"/>
+ <arg name="width" type="int" summary="width of anchor rectangle"/>
+ <arg name="height" type="int" summary="height of anchor rectangle"/>
+ </request>
+
+ <enum name="anchor" bitfield="true">
+ <entry name="none" value="0"
+ summary="the center of the anchor rectangle"/>
+ <entry name="top" value="1"
+ summary="the top edge of the anchor rectangle"/>
+ <entry name="bottom" value="2"
+ summary="the bottom edge of the anchor rectangle"/>
+ <entry name="left" value="4"
+ summary="the left edge of the anchor rectangle"/>
+ <entry name="right" value="8"
+ summary="the right edge of the anchor rectangle"/>
+ </enum>
+
+ <request name="set_anchor">
+ <description summary="set anchor rectangle anchor edges">
+ Defines a set of edges for the anchor rectangle. These are used to
+ derive an anchor point that the child surface will be positioned
+ relative to. If two orthogonal edges are specified (e.g. 'top' and
+ 'left'), then the anchor point will be the intersection of the edges
+ (e.g. the top left position of the rectangle); otherwise, the derived
+ anchor point will be centered on the specified edge, or in the center of
+ the anchor rectangle if no edge is specified.
+
+ If two parallel anchor edges are specified (e.g. 'left' and 'right'),
+ the invalid_input error is raised.
+ </description>
+ <arg name="anchor" type="uint" enum="anchor"
+ summary="bit mask of anchor edges"/>
+ </request>
+
+ <enum name="gravity" bitfield="true">
+ <entry name="none" value="0"
+ summary="center over the anchor edge"/>
+ <entry name="top" value="1"
+ summary="position above the anchor edge"/>
+ <entry name="bottom" value="2"
+ summary="position below the anchor edge"/>
+ <entry name="left" value="4"
+ summary="position to the left of the anchor edge"/>
+ <entry name="right" value="8"
+ summary="position to the right of the anchor edge"/>
+ </enum>
+
+ <request name="set_gravity">
+ <description summary="set child surface gravity">
+ Defines in what direction a surface should be positioned, relative to
+ the anchor point of the parent surface. If two orthogonal gravities are
+ specified (e.g. 'bottom' and 'right'), then the child surface will be
+ placed in the specified direction; otherwise, the child surface will be
+ centered over the anchor point on any axis that had no gravity
+ specified.
+
+ If two parallel gravities are specified (e.g. 'left' and 'right'), the
+ invalid_input error is raised.
+ </description>
+ <arg name="gravity" type="uint" enum="gravity"
+ summary="bit mask of gravity directions"/>
+ </request>
+
+ <enum name="constraint_adjustment" bitfield="true">
+ <description summary="constraint adjustments">
+ The constraint adjustment value define ways the compositor will adjust
+ the position of the surface, if the unadjusted position would result
+ in the surface being partly constrained.
+
+ Whether a surface is considered 'constrained' is left to the compositor
+ to determine. For example, the surface may be partly outside the
+ compositor's defined 'work area', thus necessitating the child surface's
+ position be adjusted until it is entirely inside the work area.
+
+ The adjustments can be combined, according to a defined precedence: 1)
+ Flip, 2) Slide, 3) Resize.
+ </description>
+ <entry name="none" value="0">
+ <description summary="don't move the child surface when constrained">
+ Don't alter the surface position even if it is constrained on some
+ axis, for example partially outside the edge of a monitor.
+ </description>
+ </entry>
+ <entry name="slide_x" value="1">
+ <description summary="move along the x axis until unconstrained">
+ Slide the surface along the x axis until it is no longer constrained.
+
+ First try to slide towards the direction of the gravity on the x axis
+ until either the edge in the opposite direction of the gravity is
+ unconstrained or the edge in the direction of the gravity is
+ constrained.
+
+ Then try to slide towards the opposite direction of the gravity on the
+ x axis until either the edge in the direction of the gravity is
+ unconstrained or the edge in the opposite direction of the gravity is
+ constrained.
+ </description>
+ </entry>
+ <entry name="slide_y" value="2">
+ <description summary="move along the y axis until unconstrained">
+ Slide the surface along the y axis until it is no longer constrained.
+
+ First try to slide towards the direction of the gravity on the y axis
+ until either the edge in the opposite direction of the gravity is
+ unconstrained or the edge in the direction of the gravity is
+ constrained.
+
+ Then try to slide towards the opposite direction of the gravity on the
+ y axis until either the edge in the direction of the gravity is
+ unconstrained or the edge in the opposite direction of the gravity is
+ constrained.
+ </description>
+ </entry>
+ <entry name="flip_x" value="4">
+ <description summary="invert the anchor and gravity on the x axis">
+ Invert the anchor and gravity on the x axis if the surface is
+ constrained on the x axis. For example, if the left edge of the
+ surface is constrained, the gravity is 'left' and the anchor is
+ 'left', change the gravity to 'right' and the anchor to 'right'.
+
+ If the adjusted position also ends up being constrained, the resulting
+ position of the flip_x adjustment will be the one before the
+ adjustment.
+ </description>
+ </entry>
+ <entry name="flip_y" value="8">
+ <description summary="invert the anchor and gravity on the y axis">
+ Invert the anchor and gravity on the y axis if the surface is
+ constrained on the y axis. For example, if the bottom edge of the
+ surface is constrained, the gravity is 'bottom' and the anchor is
+ 'bottom', change the gravity to 'top' and the anchor to 'top'.
+
+ If the adjusted position also ends up being constrained, the resulting
+ position of the flip_y adjustment will be the one before the
+ adjustment.
+ </description>
+ </entry>
+ <entry name="resize_x" value="16">
+ <description summary="horizontally resize the surface">
+ Resize the surface horizontally so that it is completely
+ unconstrained.
+ </description>
+ </entry>
+ <entry name="resize_y" value="32">
+ <description summary="vertically resize the surface">
+ Resize the surface vertically so that it is completely unconstrained.
+ </description>
+ </entry>
+ </enum>
+
+ <request name="set_constraint_adjustment">
+ <description summary="set the adjustment to be done when constrained">
+ Specify how the window should be positioned if the originally intended
+ position caused the surface to be constrained, meaning at least
+ partially outside positioning boundaries set by the compositor. The
+ adjustment is set by constructing a bitmask describing the adjustment to
+ be made when the surface is constrained on that axis.
+
+ If no bit for one axis is set, the compositor will assume that the child
+ surface should not change its position on that axis when constrained.
+
+ If more than one bit for one axis is set, the order of how adjustments
+ are applied is specified in the corresponding adjustment descriptions.
+
+ The default adjustment is none.
+ </description>
+ <arg name="constraint_adjustment" type="uint"
+ summary="bit mask of constraint adjustments"/>
+ </request>
+
+ <request name="set_offset">
+ <description summary="set surface position offset">
+ Specify the surface position offset relative to the position of the
+ anchor on the anchor rectangle and the anchor on the surface. For
+ example if the anchor of the anchor rectangle is at (x, y), the surface
+ has the gravity bottom|right, and the offset is (ox, oy), the calculated
+ surface position will be (x + ox, y + oy). The offset position of the
+ surface is the one used for constraint testing. See
+ set_constraint_adjustment.
+
+ An example use case is placing a popup menu on top of a user interface
+ element, while aligning the user interface element of the parent surface
+ with some user interface element placed somewhere in the popup surface.
+ </description>
+ <arg name="x" type="int" summary="surface position x offset"/>
+ <arg name="y" type="int" summary="surface position y offset"/>
+ </request>
+ </interface>
+
+ <interface name="zxdg_surface_v6" version="1">
+ <description summary="desktop user interface surface base interface">
+ An interface that may be implemented by a wl_surface, for
+ implementations that provide a desktop-style user interface.
+
+ It provides a base set of functionality required to construct user
+ interface elements requiring management by the compositor, such as
+ toplevel windows, menus, etc. The types of functionality are split into
+ xdg_surface roles.
+
+ Creating an xdg_surface does not set the role for a wl_surface. In order
+ to map an xdg_surface, the client must create a role-specific object
+ using, e.g., get_toplevel, get_popup. The wl_surface for any given
+ xdg_surface can have at most one role, and may not be assigned any role
+ not based on xdg_surface.
+
+ A role must be assigned before any other requests are made to the
+ xdg_surface object.
+
+ The client must call wl_surface.commit on the corresponding wl_surface
+ for the xdg_surface state to take effect.
+
+ Creating an xdg_surface from a wl_surface which has a buffer attached or
+ committed is a client error, and any attempts by a client to attach or
+ manipulate a buffer prior to the first xdg_surface.configure call must
+ also be treated as errors.
+
+ For a surface to be mapped by the compositor, the following conditions
+ must be met: (1) the client has assigned a xdg_surface based role to the
+ surface, (2) the client has set and committed the xdg_surface state and
+ the role dependent state to the surface and (3) the client has committed a
+ buffer to the surface.
+ </description>
+
+ <enum name="error">
+ <entry name="not_constructed" value="1"/>
+ <entry name="already_constructed" value="2"/>
+ <entry name="unconfigured_buffer" value="3"/>
+ </enum>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy the xdg_surface">
+ Destroy the xdg_surface object. An xdg_surface must only be destroyed
+ after its role object has been destroyed.
+ </description>
+ </request>
+
+ <request name="get_toplevel">
+ <description summary="assign the xdg_toplevel surface role">
+ This creates an xdg_toplevel object for the given xdg_surface and gives
+ the associated wl_surface the xdg_toplevel role.
+
+ See the documentation of xdg_toplevel for more details about what an
+ xdg_toplevel is and how it is used.
+ </description>
+ <arg name="id" type="new_id" interface="zxdg_toplevel_v6"/>
+ </request>
+
+ <request name="get_popup">
+ <description summary="assign the xdg_popup surface role">
+ This creates an xdg_popup object for the given xdg_surface and gives the
+ associated wl_surface the xdg_popup role.
+
+ See the documentation of xdg_popup for more details about what an
+ xdg_popup is and how it is used.
+ </description>
+ <arg name="id" type="new_id" interface="zxdg_popup_v6"/>
+ <arg name="parent" type="object" interface="zxdg_surface_v6"/>
+ <arg name="positioner" type="object" interface="zxdg_positioner_v6"/>
+ </request>
+
+ <request name="set_window_geometry">
+ <description summary="set the new window geometry">
+ The window geometry of a surface is its "visible bounds" from the
+ user's perspective. Client-side decorations often have invisible
+ portions like drop-shadows which should be ignored for the
+ purposes of aligning, placing and constraining windows.
+
+ The window geometry is double buffered, and will be applied at the
+ time wl_surface.commit of the corresponding wl_surface is called.
+
+ Once the window geometry of the surface is set, it is not possible to
+ unset it, and it will remain the same until set_window_geometry is
+ called again, even if a new subsurface or buffer is attached.
+
+ If never set, the value is the full bounds of the surface,
+ including any subsurfaces. This updates dynamically on every
+ commit. This unset is meant for extremely simple clients.
+
+ The arguments are given in the surface-local coordinate space of
+ the wl_surface associated with this xdg_surface.
+
+ The width and height must be greater than zero. Setting an invalid size
+ will raise an error. When applied, the effective window geometry will be
+ the set window geometry clamped to the bounding rectangle of the
+ combined geometry of the surface of the xdg_surface and the associated
+ subsurfaces.
+ </description>
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ </request>
+
+ <request name="ack_configure">
+ <description summary="ack a configure event">
+ When a configure event is received, if a client commits the
+ surface in response to the configure event, then the client
+ must make an ack_configure request sometime before the commit
+ request, passing along the serial of the configure event.
+
+ For instance, for toplevel surfaces the compositor might use this
+ information to move a surface to the top left only when the client has
+ drawn itself for the maximized or fullscreen state.
+
+ If the client receives multiple configure events before it
+ can respond to one, it only has to ack the last configure event.
+
+ A client is not required to commit immediately after sending
+ an ack_configure request - it may even ack_configure several times
+ before its next surface commit.
+
+ A client may send multiple ack_configure requests before committing, but
+ only the last request sent before a commit indicates which configure
+ event the client really is responding to.
+ </description>
+ <arg name="serial" type="uint" summary="the serial from the configure event"/>
+ </request>
+
+ <event name="configure">
+ <description summary="suggest a surface change">
+ The configure event marks the end of a configure sequence. A configure
+ sequence is a set of one or more events configuring the state of the
+ xdg_surface, including the final xdg_surface.configure event.
+
+ Where applicable, xdg_surface surface roles will during a configure
+ sequence extend this event as a latched state sent as events before the
+ xdg_surface.configure event. Such events should be considered to make up
+ a set of atomically applied configuration states, where the
+ xdg_surface.configure commits the accumulated state.
+
+ Clients should arrange their surface for the new states, and then send
+ an ack_configure request with the serial sent in this configure event at
+ some point before committing the new surface.
+
+ If the client receives multiple configure events before it can respond
+ to one, it is free to discard all but the last event it received.
+ </description>
+ <arg name="serial" type="uint" summary="serial of the configure event"/>
+ </event>
+ </interface>
+
+ <interface name="zxdg_toplevel_v6" version="1">
+ <description summary="toplevel surface">
+ This interface defines an xdg_surface role which allows a surface to,
+ among other things, set window-like properties such as maximize,
+ fullscreen, and minimize, set application-specific metadata like title and
+ id, and well as trigger user interactive operations such as interactive
+ resize and move.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="destroy the xdg_toplevel">
+ Unmap and destroy the window. The window will be effectively
+ hidden from the user's point of view, and all state like
+ maximization, fullscreen, and so on, will be lost.
+ </description>
+ </request>
+
+ <request name="set_parent">
+ <description summary="set the parent of this surface">
+ Set the "parent" of this surface. This window should be stacked
+ above a parent. The parent surface must be mapped as long as this
+ surface is mapped.
+
+ Parent windows should be set on dialogs, toolboxes, or other
+ "auxiliary" surfaces, so that the parent is raised when the dialog
+ is raised.
+ </description>
+ <arg name="parent" type="object" interface="zxdg_toplevel_v6" allow-null="true"/>
+ </request>
+
+ <request name="set_title">
+ <description summary="set surface title">
+ Set a short title for the surface.
+
+ This string may be used to identify the surface in a task bar,
+ window list, or other user interface elements provided by the
+ compositor.
+
+ The string must be encoded in UTF-8.
+ </description>
+ <arg name="title" type="string"/>
+ </request>
+
+ <request name="set_app_id">
+ <description summary="set application ID">
+ Set an application identifier for the surface.
+
+ The app ID identifies the general class of applications to which
+ the surface belongs. The compositor can use this to group multiple
+ surfaces together, or to determine how to launch a new application.
+
+ For D-Bus activatable applications, the app ID is used as the D-Bus
+ service name.
+
+ The compositor shell will try to group application surfaces together
+ by their app ID. As a best practice, it is suggested to select app
+ ID's that match the basename of the application's .desktop file.
+ For example, "org.freedesktop.FooViewer" where the .desktop file is
+ "org.freedesktop.FooViewer.desktop".
+
+ See the desktop-entry specification [0] for more details on
+ application identifiers and how they relate to well-known D-Bus
+ names and .desktop files.
+
+ [0] http://standards.freedesktop.org/desktop-entry-spec/
+ </description>
+ <arg name="app_id" type="string"/>
+ </request>
+
+ <request name="show_window_menu">
+ <description summary="show the window menu">
+ Clients implementing client-side decorations might want to show
+ a context menu when right-clicking on the decorations, giving the
+ user a menu that they can use to maximize or minimize the window.
+
+ This request asks the compositor to pop up such a window menu at
+ the given position, relative to the local surface coordinates of
+ the parent surface. There are no guarantees as to what menu items
+ the window menu contains.
+
+ This request must be used in response to some sort of user action
+ like a button press, key press, or touch down event.
+ </description>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ <arg name="x" type="int" summary="the x position to pop up the window menu at"/>
+ <arg name="y" type="int" summary="the y position to pop up the window menu at"/>
+ </request>
+
+ <request name="move">
+ <description summary="start an interactive move">
+ Start an interactive, user-driven move of the surface.
+
+ This request must be used in response to some sort of user action
+ like a button press, key press, or touch down event. The passed
+ serial is used to determine the type of interactive move (touch,
+ pointer, etc).
+
+ The server may ignore move requests depending on the state of
+ the surface (e.g. fullscreen or maximized), or if the passed serial
+ is no longer valid.
+
+ If triggered, the surface will lose the focus of the device
+ (wl_pointer, wl_touch, etc) used for the move. It is up to the
+ compositor to visually indicate that the move is taking place, such as
+ updating a pointer cursor, during the move. There is no guarantee
+ that the device focus will return when the move is completed.
+ </description>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ </request>
+
+ <enum name="resize_edge">
+ <description summary="edge values for resizing">
+ These values are used to indicate which edge of a surface
+ is being dragged in a resize operation.
+ </description>
+ <entry name="none" value="0"/>
+ <entry name="top" value="1"/>
+ <entry name="bottom" value="2"/>
+ <entry name="left" value="4"/>
+ <entry name="top_left" value="5"/>
+ <entry name="bottom_left" value="6"/>
+ <entry name="right" value="8"/>
+ <entry name="top_right" value="9"/>
+ <entry name="bottom_right" value="10"/>
+ </enum>
+
+ <request name="resize">
+ <description summary="start an interactive resize">
+ Start a user-driven, interactive resize of the surface.
+
+ This request must be used in response to some sort of user action
+ like a button press, key press, or touch down event. The passed
+ serial is used to determine the type of interactive resize (touch,
+ pointer, etc).
+
+ The server may ignore resize requests depending on the state of
+ the surface (e.g. fullscreen or maximized).
+
+ If triggered, the client will receive configure events with the
+ "resize" state enum value and the expected sizes. See the "resize"
+ enum value for more details about what is required. The client
+ must also acknowledge configure events using "ack_configure". After
+ the resize is completed, the client will receive another "configure"
+ event without the resize state.
+
+ If triggered, the surface also will lose the focus of the device
+ (wl_pointer, wl_touch, etc) used for the resize. It is up to the
+ compositor to visually indicate that the resize is taking place,
+ such as updating a pointer cursor, during the resize. There is no
+ guarantee that the device focus will return when the resize is
+ completed.
+
+ The edges parameter specifies how the surface should be resized,
+ and is one of the values of the resize_edge enum. The compositor
+ may use this information to update the surface position for
+ example when dragging the top left corner. The compositor may also
+ use this information to adapt its behavior, e.g. choose an
+ appropriate cursor image.
+ </description>
+ <arg name="seat" type="object" interface="wl_seat" summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ <arg name="edges" type="uint" summary="which edge or corner is being dragged"/>
+ </request>
+
+ <enum name="state">
+ <description summary="types of state on the surface">
+ The different state values used on the surface. This is designed for
+ state values like maximized, fullscreen. It is paired with the
+ configure event to ensure that both the client and the compositor
+ setting the state can be synchronized.
+
+ States set in this way are double-buffered. They will get applied on
+ the next commit.
+ </description>
+ <entry name="maximized" value="1" summary="the surface is maximized">
+ <description summary="the surface is maximized">
+ The surface is maximized. The window geometry specified in the configure
+ event must be obeyed by the client.
+ </description>
+ </entry>
+ <entry name="fullscreen" value="2" summary="the surface is fullscreen">
+ <description summary="the surface is fullscreen">
+ The surface is fullscreen. The window geometry specified in the configure
+ event must be obeyed by the client.
+ </description>
+ </entry>
+ <entry name="resizing" value="3" summary="the surface is being resized">
+ <description summary="the surface is being resized">
+ The surface is being resized. The window geometry specified in the
+ configure event is a maximum; the client cannot resize beyond it.
+ Clients that have aspect ratio or cell sizing configuration can use
+ a smaller size, however.
+ </description>
+ </entry>
+ <entry name="activated" value="4" summary="the surface is now activated">
+ <description summary="the surface is now activated">
+ Client window decorations should be painted as if the window is
+ active. Do not assume this means that the window actually has
+ keyboard or pointer focus.
+ </description>
+ </entry>
+ </enum>
+
+ <request name="set_max_size">
+ <description summary="set the maximum size">
+ Set a maximum size for the window.
+
+ The client can specify a maximum size so that the compositor does
+ not try to configure the window beyond this size.
+
+ The width and height arguments are in window geometry coordinates.
+ See xdg_surface.set_window_geometry.
+
+ Values set in this way are double-buffered. They will get applied
+ on the next commit.
+
+ The compositor can use this information to allow or disallow
+ different states like maximize or fullscreen and draw accurate
+ animations.
+
+ Similarly, a tiling window manager may use this information to
+ place and resize client windows in a more effective way.
+
+ The client should not rely on the compositor to obey the maximum
+ size. The compositor may decide to ignore the values set by the
+ client and request a larger size.
+
+ If never set, or a value of zero in the request, means that the
+ client has no expected maximum size in the given dimension.
+ As a result, a client wishing to reset the maximum size
+ to an unspecified state can use zero for width and height in the
+ request.
+
+ Requesting a maximum size to be smaller than the minimum size of
+ a surface is illegal and will result in a protocol error.
+
+ The width and height must be greater than or equal to zero. Using
+ strictly negative values for width and height will result in a
+ protocol error.
+ </description>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ </request>
+
+ <request name="set_min_size">
+ <description summary="set the minimum size">
+ Set a minimum size for the window.
+
+ The client can specify a minimum size so that the compositor does
+ not try to configure the window below this size.
+
+ The width and height arguments are in window geometry coordinates.
+ See xdg_surface.set_window_geometry.
+
+ Values set in this way are double-buffered. They will get applied
+ on the next commit.
+
+ The compositor can use this information to allow or disallow
+ different states like maximize or fullscreen and draw accurate
+ animations.
+
+ Similarly, a tiling window manager may use this information to
+ place and resize client windows in a more effective way.
+
+ The client should not rely on the compositor to obey the minimum
+ size. The compositor may decide to ignore the values set by the
+ client and request a smaller size.
+
+ If never set, or a value of zero in the request, means that the
+ client has no expected minimum size in the given dimension.
+ As a result, a client wishing to reset the minimum size
+ to an unspecified state can use zero for width and height in the
+ request.
+
+ Requesting a minimum size to be larger than the maximum size of
+ a surface is illegal and will result in a protocol error.
+
+ The width and height must be greater than or equal to zero. Using
+ strictly negative values for width and height will result in a
+ protocol error.
+ </description>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ </request>
+
+ <request name="set_maximized">
+ <description summary="maximize the window">
+ Maximize the surface.
+
+ After requesting that the surface should be maximized, the compositor
+ will respond by emitting a configure event with the "maximized" state
+ and the required window geometry. The client should then update its
+ content, drawing it in a maximized state, i.e. without shadow or other
+ decoration outside of the window geometry. The client must also
+ acknowledge the configure when committing the new content (see
+ ack_configure).
+
+ It is up to the compositor to decide how and where to maximize the
+ surface, for example which output and what region of the screen should
+ be used.
+
+ If the surface was already maximized, the compositor will still emit
+ a configure event with the "maximized" state.
+ </description>
+ </request>
+
+ <request name="unset_maximized">
+ <description summary="unmaximize the window">
+ Unmaximize the surface.
+
+ After requesting that the surface should be unmaximized, the compositor
+ will respond by emitting a configure event without the "maximized"
+ state. If available, the compositor will include the window geometry
+ dimensions the window had prior to being maximized in the configure
+ request. The client must then update its content, drawing it in a
+ regular state, i.e. potentially with shadow, etc. The client must also
+ acknowledge the configure when committing the new content (see
+ ack_configure).
+
+ It is up to the compositor to position the surface after it was
+ unmaximized; usually the position the surface had before maximizing, if
+ applicable.
+
+ If the surface was already not maximized, the compositor will still
+ emit a configure event without the "maximized" state.
+ </description>
+ </request>
+
+ <request name="set_fullscreen">
+ <description summary="set the window as fullscreen on a monitor">
+ Make the surface fullscreen.
+
+ You can specify an output that you would prefer to be fullscreen.
+ If this value is NULL, it's up to the compositor to choose which
+ display will be used to map this surface.
+
+ If the surface doesn't cover the whole output, the compositor will
+ position the surface in the center of the output and compensate with
+ black borders filling the rest of the output.
+ </description>
+ <arg name="output" type="object" interface="wl_output" allow-null="true"/>
+ </request>
+ <request name="unset_fullscreen" />
+
+ <request name="set_minimized">
+ <description summary="set the window as minimized">
+ Request that the compositor minimize your surface. There is no
+ way to know if the surface is currently minimized, nor is there
+ any way to unset minimization on this surface.
+
+ If you are looking to throttle redrawing when minimized, please
+ instead use the wl_surface.frame event for this, as this will
+ also work with live previews on windows in Alt-Tab, Expose or
+ similar compositor features.
+ </description>
+ </request>
+
+ <event name="configure">
+ <description summary="suggest a surface change">
+ This configure event asks the client to resize its toplevel surface or
+ to change its state. The configured state should not be applied
+ immediately. See xdg_surface.configure for details.
+
+ The width and height arguments specify a hint to the window
+ about how its surface should be resized in window geometry
+ coordinates. See set_window_geometry.
+
+ If the width or height arguments are zero, it means the client
+ should decide its own window dimension. This may happen when the
+ compositor needs to configure the state of the surface but doesn't
+ have any information about any previous or expected dimension.
+
+ The states listed in the event specify how the width/height
+ arguments should be interpreted, and possibly how it should be
+ drawn.
+
+ Clients must send an ack_configure in response to this event. See
+ xdg_surface.configure and xdg_surface.ack_configure for details.
+ </description>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ <arg name="states" type="array"/>
+ </event>
+
+ <event name="close">
+ <description summary="surface wants to be closed">
+ The close event is sent by the compositor when the user
+ wants the surface to be closed. This should be equivalent to
+ the user clicking the close button in client-side decorations,
+ if your application has any.
+
+ This is only a request that the user intends to close the
+ window. The client may choose to ignore this request, or show
+ a dialog to ask the user to save their data, etc.
+ </description>
+ </event>
+ </interface>
+
+ <interface name="zxdg_popup_v6" version="1">
+ <description summary="short-lived, popup surfaces for menus">
+ A popup surface is a short-lived, temporary surface. It can be used to
+ implement for example menus, popovers, tooltips and other similar user
+ interface concepts.
+
+ A popup can be made to take an explicit grab. See xdg_popup.grab for
+ details.
+
+ When the popup is dismissed, a popup_done event will be sent out, and at
+ the same time the surface will be unmapped. See the xdg_popup.popup_done
+ event for details.
+
+ Explicitly destroying the xdg_popup object will also dismiss the popup and
+ unmap the surface. Clients that want to dismiss the popup when another
+ surface of their own is clicked should dismiss the popup using the destroy
+ request.
+
+ The parent surface must have either the xdg_toplevel or xdg_popup surface
+ role.
+
+ A newly created xdg_popup will be stacked on top of all previously created
+ xdg_popup surfaces associated with the same xdg_toplevel.
+
+ The parent of an xdg_popup must be mapped (see the xdg_surface
+ description) before the xdg_popup itself.
+
+ The x and y arguments passed when creating the popup object specify
+ where the top left of the popup should be placed, relative to the
+ local surface coordinates of the parent surface. See
+ xdg_surface.get_popup. An xdg_popup must intersect with or be at least
+ partially adjacent to its parent surface.
+
+ The client must call wl_surface.commit on the corresponding wl_surface
+ for the xdg_popup state to take effect.
+ </description>
+
+ <enum name="error">
+ <entry name="invalid_grab" value="0"
+ summary="tried to grab after being mapped"/>
+ </enum>
+
+ <request name="destroy" type="destructor">
+ <description summary="remove xdg_popup interface">
+ This destroys the popup. Explicitly destroying the xdg_popup
+ object will also dismiss the popup, and unmap the surface.
+
+ If this xdg_popup is not the "topmost" popup, a protocol error
+ will be sent.
+ </description>
+ </request>
+
+ <request name="grab">
+ <description summary="make the popup take an explicit grab">
+ This request makes the created popup take an explicit grab. An explicit
+ grab will be dismissed when the user dismisses the popup, or when the
+ client destroys the xdg_popup. This can be done by the user clicking
+ outside the surface, using the keyboard, or even locking the screen
+ through closing the lid or a timeout.
+
+ If the compositor denies the grab, the popup will be immediately
+ dismissed.
+
+ This request must be used in response to some sort of user action like a
+ button press, key press, or touch down event. The serial number of the
+ event should be passed as 'serial'.
+
+ The parent of a grabbing popup must either be an xdg_toplevel surface or
+ another xdg_popup with an explicit grab. If the parent is another
+ xdg_popup it means that the popups are nested, with this popup now being
+ the topmost popup.
+
+ Nested popups must be destroyed in the reverse order they were created
+ in, e.g. the only popup you are allowed to destroy at all times is the
+ topmost one.
+
+ When compositors choose to dismiss a popup, they may dismiss every
+ nested grabbing popup as well. When a compositor dismisses popups, it
+ will follow the same dismissing order as required from the client.
+
+ The parent of a grabbing popup must either be another xdg_popup with an
+ active explicit grab, or an xdg_popup or xdg_toplevel, if there are no
+ explicit grabs already taken.
+
+ If the topmost grabbing popup is destroyed, the grab will be returned to
+ the parent of the popup, if that parent previously had an explicit grab.
+
+ If the parent is a grabbing popup which has already been dismissed, this
+ popup will be immediately dismissed. If the parent is a popup that did
+ not take an explicit grab, an error will be raised.
+
+ During a popup grab, the client owning the grab will receive pointer
+ and touch events for all their surfaces as normal (similar to an
+ "owner-events" grab in X11 parlance), while the top most grabbing popup
+ will always have keyboard focus.
+ </description>
+ <arg name="seat" type="object" interface="wl_seat"
+ summary="the wl_seat of the user event"/>
+ <arg name="serial" type="uint" summary="the serial of the user event"/>
+ </request>
+
+ <event name="configure">
+ <description summary="configure the popup surface">
+ This event asks the popup surface to configure itself given the
+ configuration. The configured state should not be applied immediately.
+ See xdg_surface.configure for details.
+
+ The x and y arguments represent the position the popup was placed at
+ given the xdg_positioner rule, relative to the upper left corner of the
+ window geometry of the parent surface.
+ </description>
+ <arg name="x" type="int"
+ summary="x position relative to parent surface window geometry"/>
+ <arg name="y" type="int"
+ summary="y position relative to parent surface window geometry"/>
+ <arg name="width" type="int" summary="window geometry width"/>
+ <arg name="height" type="int" summary="window geometry height"/>
+ </event>
+
+ <event name="popup_done">
+ <description summary="popup interaction is done">
+ The popup_done event is sent out when a popup is dismissed by the
+ compositor. The client should destroy the xdg_popup object at this
+ point.
+ </description>
+ </event>
+
+ </interface>
+</protocol>
--
2.14.2
More information about the wayland-devel
mailing list