[PATCH v10 wayland_protocols] text-input: Add v3 of the text-input protocol
Dorota Czaplejewicz
dorota.czaplejewicz at puri.sm
Mon Jul 30 14:14:51 UTC 2018
From: Carlos Garnacho <carlosg at gnome.org>
This new protocol description is an evolution of v2.
- All pre-edit text styling is gone.
- Pre-edit cursor can span characters.
- No events regarding input panel (OSK) state nor covered rectangle.
Compositors are still free to handle situations where the keyboard
focus rectangle is covered by the input panel.
- No set_preferred_language request for clients.
- There is no event to send keysyms. Compositors can use wl_keyboard
interface instead.
- All state is double-buffered, with specified defaults.
- The compositor can be notified about external changes to the state.
- The client can detect outdated requests.
Signed-off-by: Dorota Czaplejewicz <dorota.czaplejewicz at puri.sm>
Signed-off-by: Carlos Garnacho <carlosg at gnome.org>
---
Hi,
this patch applies most recent advice from Jonas. The changes are in commit and done messages and spelled out in my previous email.
Cheers,
Dorota
Makefile.am | 1 +
unstable/text-input/text-input-unstable-v3.xml | 435 +++++++++++++++++++++++++
2 files changed, 436 insertions(+)
create mode 100644 unstable/text-input/text-input-unstable-v3.xml
diff --git a/Makefile.am b/Makefile.am
index 4b9a901..86d7ca9 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -3,6 +3,7 @@ unstable_protocols = \
unstable/fullscreen-shell/fullscreen-shell-unstable-v1.xml \
unstable/linux-dmabuf/linux-dmabuf-unstable-v1.xml \
unstable/text-input/text-input-unstable-v1.xml \
+ unstable/text-input/text-input-unstable-v3.xml \
unstable/input-method/input-method-unstable-v1.xml \
unstable/xdg-shell/xdg-shell-unstable-v5.xml \
unstable/xdg-shell/xdg-shell-unstable-v6.xml \
diff --git a/unstable/text-input/text-input-unstable-v3.xml b/unstable/text-input/text-input-unstable-v3.xml
new file mode 100644
index 0000000..acf5674
--- /dev/null
+++ b/unstable/text-input/text-input-unstable-v3.xml
@@ -0,0 +1,435 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<protocol name="text_input_unstable_v3">
+ <copyright>
+ Copyright © 2012, 2013 Intel Corporation
+ Copyright © 2015, 2016 Jan Arne Petersen
+ Copyright © 2017, 2018 Red Hat, Inc.
+ Copyright © 2018 Purism SPC
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that copyright notice and this permission
+ notice appear in supporting documentation, and that the name of
+ the copyright holders not be used in advertising or publicity
+ pertaining to distribution of the software without specific,
+ written prior permission. The copyright holders make no
+ representations about the suitability of this software for any
+ purpose. It is provided "as is" without express or implied
+ warranty.
+
+ THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
+ SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
+ FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+ AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
+ THIS SOFTWARE.
+ </copyright>
+
+ <interface name="zwp_text_input_v3" version="1">
+ <description summary="text input">
+ The zwp_text_input_v3 interface represents text input and input methods
+ associated with a seat. It provides enter/leave events to follow the
+ text input focus for a seat.
+
+ Requests are used to enable/disable the text-input object and set
+ state information like surrounding and selected text or the content type.
+ The information about the entered text is sent to the text-input object
+ via the preedit_string and commit_string events.
+
+ Text is valid UTF-8 encoded, indices and lengths are in bytes. Indices
+ must not point to middle bytes inside a code point: they must either
+ point to the first byte of a code point or to the end of the buffer.
+ Lengths must be measured between two valid indices.
+
+ Focus moving throughout surfaces will result in the emission of
+ zwp_text_input_v3.enter and zwp_text_input_v3.leave events. The focused
+ surface must commit zwp_text_input_v3.enable and
+ zwp_text_input_v3.disable requests as the keyboard focus moves across
+ editable and non-editable elements of the UI. Those two requests are not
+ expected to be paired with each other, the compositor must be able to
+ handle consecutive series of the same request.
+
+ State is sent by the state requests (set_surrounding_text,
+ set_content_type and set_cursor_rectangle) and a commit request. After an
+ enter event or disable request all state information is invalidated and
+ needs to be resent by the client.
+
+ This document adheres to the RFC 2119 when using words like "must",
+ "should", "may", etc.
+
+ Warning! The protocol described in this file is experimental and
+ backward incompatible changes may be made. Backward compatible changes
+ may be added together with the corresponding interface version bump.
+ Backward incompatible changes are done by bumping the version number in
+ the protocol and interface names and resetting the interface version.
+ Once the protocol is to be declared stable, the 'z' prefix and the
+ version number in the protocol and interface names are removed and the
+ interface version number is reset.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="Destroy the wp_text_input">
+ Destroy the wp_text_input object. Also disables all surfaces enabled
+ through this wp_text_input object.
+ </description>
+ </request>
+
+ <request name="enable">
+ <description summary="Request text input to be enabled">
+ Requests text input on the surface previously obtained from the enter
+ event.
+
+ This request must be issued every time the active text input changes
+ to a new one, including within the current surface. Use
+ zwp_text_input_v3.disable when there is no longer any input focus on
+ the current surface.
+
+ This request resets all state associated with previous enable, disable,
+ set_surrounding_text, set_text_change_cause, set_content_type, and
+ set_cursor_rectangle requests, as well as the state associated with
+ preedit_string, commit_string, and delete_surrounding_text events.
+
+ The set_surrounding_text, set_content_type and set_cursor_rectangle
+ requests must follow if the text input supports the necessary
+ functionality.
+
+ State set with this request is double-buffered. It will get applied on
+ the next zwp_text_input_v3.commit request, and stay valid until the
+ next committed enable or disable request.
+
+ The changes must be applied by the compositor after issuing a
+ zwp_text_input_v3.commit request.
+ </description>
+ </request>
+
+ <request name="disable">
+ <description summary="Disable text input on a surface">
+ Explicitly disable text input on the current surface (typically when
+ there is no focus on any text entry inside the surface).
+
+ State set with this request is double-buffered. It will get applied on
+ the next zwp_text_input_v3.commit request.
+ </description>
+ </request>
+
+ <request name="set_surrounding_text">
+ <description summary="sets the surrounding text">
+ Sets the surrounding plain text around the input, excluding the preedit
+ text.
+
+ The client should notify the compositor of any changes in any of the
+ values carried with this request, including changes caused by handling
+ incoming text-input events as well as changes caused by other
+ mechanisms like keyboard typing.
+
+ If the client is unaware of the text around the cursor, it should not
+ issue this request, to signify lack of support to the compositor.
+
+ Text is UTF-8 encoded, and should include the cursor position, the
+ complete selection and additional characters before and after them.
+ There is a maximum length of wayland messages, so text can not be
+ longer than 4000 bytes.
+
+ Cursor is the byte offset of the cursor within text buffer.
+
+ Anchor is the byte offset of the selection anchor within text buffer.
+ If there is no selected text, anchor is the same as cursor.
+
+ If any preedit text is present, it is replaced with a cursor for the
+ purpose of this event.
+
+ Values set with this request are double-buffered. They will get applied
+ on the next zwp_text_input_v3.commit request, and stay valid until the
+ next committed enable or disable request.
+
+ The initial state for affected fields is empty, meaning that the text
+ input does not support sending surrounding text. If the empty values
+ get applied, subsequent attempts to change them may have no effect.
+ </description>
+ <arg name="text" type="string"/>
+ <arg name="cursor" type="int"/>
+ <arg name="anchor" type="int"/>
+ </request>
+
+ <enum name="change_cause">
+ <description summary="text change reason">
+ Reason for the change of surrounding text or cursor posision.
+ </description>
+ <entry name="input_method" value="0" summary="input method caused the change"/>
+ <entry name="other" value="1" summary="something else than the input method caused the change"/>
+ </enum>
+
+ <request name="set_text_change_cause">
+ <description summary="indicates the cause of surrounding text change">
+ Tells the compositor why the text surrounding the cursor changed.
+
+ Whenever the client detects an external change in text, cursor, or
+ anchor posision, it must issue this request to the compositor. This
+ request is intended to give the input method a chance to update the
+ preedit text in an appropriate way, e.g. by removing it when the user
+ starts typing with a keyboard.
+
+ cause describes the source of the change.
+
+ The value set with this request is double-buffered. It must be applied
+ and reset to initial at the next zwp_text_input_v3.commit request.
+
+ The initial value of cause is input_method.
+ </description>
+ <arg name="cause" type="uint" enum="change_cause"/>
+ </request>
+
+ <enum name="content_hint" bitfield="true">
+ <description summary="content hint">
+ Content hint is a bitmask to allow to modify the behavior of the text
+ input.
+ </description>
+ <entry name="none" value="0x0" summary="no special behavior"/>
+ <entry name="completion" value="0x1" summary="suggest word completions"/>
+ <entry name="spellcheck" value="0x2" summary="suggest word corrections"/>
+ <entry name="auto_capitalization" value="0x4" summary="switch to uppercase letters at the start of a sentence"/>
+ <entry name="lowercase" value="0x8" summary="prefer lowercase letters"/>
+ <entry name="uppercase" value="0x10" summary="prefer uppercase letters"/>
+ <entry name="titlecase" value="0x20" summary="prefer casing for titles and headings (can be language dependent)"/>
+ <entry name="hidden_text" value="0x40" summary="characters should be hidden"/>
+ <entry name="sensitive_data" value="0x80" summary="typed text should not be stored"/>
+ <entry name="latin" value="0x100" summary="just Latin characters should be entered"/>
+ <entry name="multiline" value="0x200" summary="the text input is multiline"/>
+ </enum>
+
+ <enum name="content_purpose">
+ <description summary="content purpose">
+ The content purpose allows to specify the primary purpose of a text
+ input.
+
+ This allows an input method to show special purpose input panels with
+ extra characters or to disallow some characters.
+ </description>
+ <entry name="normal" value="0" summary="default input, allowing all characters"/>
+ <entry name="alpha" value="1" summary="allow only alphabetic characters"/>
+ <entry name="digits" value="2" summary="allow only digits"/>
+ <entry name="number" value="3" summary="input a number (including decimal separator and sign)"/>
+ <entry name="phone" value="4" summary="input a phone number"/>
+ <entry name="url" value="5" summary="input an URL"/>
+ <entry name="email" value="6" summary="input an email address"/>
+ <entry name="name" value="7" summary="input a name of a person"/>
+ <entry name="password" value="8" summary="input a password (combine with sensitive_data hint)"/>
+ <entry name="pin" value="9" summary="input is a numeric password (combine with sensitive_data hint)"/>
+ <entry name="date" value="10" summary="input a date"/>
+ <entry name="time" value="11" summary="input a time"/>
+ <entry name="datetime" value="12" summary="input a date and time"/>
+ <entry name="terminal" value="13" summary="input for a terminal"/>
+ </enum>
+
+ <request name="set_content_type">
+ <description summary="set content purpose and hint">
+ Sets the content purpose and content hint. While the purpose is the
+ basic purpose of an input field, the hint flags allow to modify some of
+ the behavior.
+
+ Values set with this request are double-buffered. They will get applied
+ on the next zwp_text_input_v3.commit request.
+ Subsequent attempts to update them may have no effect. The values
+ remain valid until the next committed enable or disable request.
+
+ The initial value for hint is none, and the initial value for purpose
+ is normal.
+ </description>
+ <arg name="hint" type="uint" enum="content_hint"/>
+ <arg name="purpose" type="uint" enum="content_purpose"/>
+ </request>
+
+ <request name="set_cursor_rectangle">
+ <description summary="set cursor position">
+ Marks an area around the cursor as a x, y, width, height rectangle in
+ surface local coordinates.
+
+ Allows the compositor to put a window with word suggestions near the
+ cursor, without obstructing the text being input.
+
+ If the client is unaware of the position of edited text, it should not
+ issue this request, to signify lack of support to the compositor.
+
+ Values set with this request are double-buffered. They will get applied
+ on the next zwp_text_input_v3.commit request, and stay valid until the
+ next committed enable or disable request.
+
+ The initial values describing a cursor rectangle are empty. That means
+ the text input does not support describing the cursor area. If the
+ empty values get applied, subsequent attempts to change them may have
+ no effect.
+ </description>
+ <arg name="x" type="int"/>
+ <arg name="y" type="int"/>
+ <arg name="width" type="int"/>
+ <arg name="height" type="int"/>
+ </request>
+
+ <request name="commit">
+ <description summary="commit state">
+ Atomically applies state changes recently sent to the compositor.
+
+ The commit request establishes and updates the state of the client, and
+ must be issued after any changes to apply them.
+
+ Text input state (enabled status, content purpose, content hint,
+ surrounding text and change cause, cursor rectangle) is conceptually
+ double-buffered within the context of a text input, i.e. between a
+ committed enable request and the following committed enable or disable
+ request.
+
+ Protocol requests modify the pending state, as opposed to the current
+ state in use by the input method. A commit request atomically applies
+ all pending state, replacing the current state. After commit, the new
+ pending state is as documented for each related request.
+
+ Requests are applied in the order of arrival.
+
+ Neither current nor pending state are modified unless noted otherwise.
+
+ The compositor must count the number of commit requests coming from
+ each zwp_text_input_v3 object and use the count as the serial in done
+ events.
+ </description>
+ </request>
+
+ <event name="enter">
+ <description summary="enter event">
+ Notification that this seat's text-input focus is on a certain surface.
+
+ When the seat has the keyboard capability the text-input focus follows
+ the keyboard focus. This event sets the current surface for the
+ text-input object.
+ </description>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ </event>
+
+ <event name="leave">
+ <description summary="leave event">
+ Notification that this seat's text-input focus is no longer on a
+ certain surface. The client should reset any preedit string previously
+ set.
+
+ The leave notification clears the current surface. It is sent before
+ the enter notification for the new focus.
+
+ When the seat has the keyboard capability the text-input focus follows
+ the keyboard focus.
+ </description>
+ <arg name="surface" type="object" interface="wl_surface"/>
+ </event>
+
+ <event name="preedit_string">
+ <description summary="pre-edit">
+ Notify when a new composing text (pre-edit) should be set at the
+ current cursor position. Any previously set composing text must be
+ removed. Any previously existing selected text must be removed.
+
+ The argument text contains the pre-edit string buffer.
+
+ The parameters cursor_begin and cursor_end are counted in bytes
+ relative to the beginning of the submitted text buffer. Cursor should
+ be hidden when both are equal to -1.
+
+ They could be represented by the client as a line if both values are
+ the same, or as a text highlight otherwise.
+
+ Values set with this event are double-buffered. They must be applied
+ and reset to initial on the next zwp_text_input_v3.done event.
+
+ The initial value of text is an empty string, and cursor_begin,
+ cursor_end and cursor_hidden are all 0.
+ </description>
+ <arg name="text" type="string" allow-null="true"/>
+ <arg name="cursor_begin" type="int"/>
+ <arg name="cursor_end" type="int"/>
+ </event>
+
+ <event name="commit_string">
+ <description summary="text commit">
+ Notify when text should be inserted into the editor widget. The text to
+ commit could be either just a single character after a key press or the
+ result of some composing (pre-edit).
+
+ Values set with this event are double-buffered. They must be applied
+ and reset to initial on the next zwp_text_input_v3.done event.
+
+ The initial value of text is an empty string.
+ </description>
+ <arg name="text" type="string" allow-null="true"/>
+ </event>
+
+ <event name="delete_surrounding_text">
+ <description summary="delete surrounding text">
+ Notify when the text around the current cursor position should be
+ deleted.
+
+ Before_length and after_length are the number of bytes before and after
+ the current cursor index (excluding the selection) to delete.
+
+ If a preedit text is present, in effect before_length is counted from
+ the beginning of it, and after_length from its end (see done event
+ sequence).
+
+ Values set with this event are double-buffered. They must be applied
+ and reset to initial on the next zwp_text_input_v3.done event.
+
+ The initial values of both before_length and after_length are 0.
+ </description>
+ <arg name="before_length" type="uint" summary="length of text before current cursor position"/>
+ <arg name="after_length" type="uint" summary="length of text after current cursor position"/>
+ </event>
+
+ <event name="done">
+ <description summary="apply changes">
+ Instruct the application to apply changes to state requested by the
+ preedit_string, commit_string and delete_surrounding_text events. The
+ state relating to these events is double-buffered, and each one
+ modifies the pending state. This event replaces the current state with
+ the pending state.
+
+ The application must proceed by evaluating the changes in the following
+ order:
+
+ 1. Replace existing preedit string with the cursor.
+ 2. Delete requested surrounding text.
+ 3. Insert commit string with the cursor at its end.
+ 4. Calculate surrounding text to send.
+ 5. Insert new preedit text in cursor position.
+ 6. Place cursor inside preedit text.
+
+ The serial number reflects the last state of the zwp_text_input_v3
+ object known to the compositor. The value of the serial argument must
+ be equal to the number of commit requests already issued on that object.
+ When the client receives a done event with a serial different than the
+ number of past commit requests, it must proceed as normal, except it
+ should not change the current state of the zwp_text_input_v3 object.
+ <arg name="serial" type="uint"/>
+ </description>
+ </event>
+ </interface>
+
+ <interface name="zwp_text_input_manager_v3" version="1">
+ <description summary="text input manager">
+ A factory for text-input objects. This object is a global singleton.
+ </description>
+
+ <request name="destroy" type="destructor">
+ <description summary="Destroy the wp_text_input_manager">
+ Destroy the wp_text_input_manager object.
+ </description>
+ </request>
+
+ <request name="get_text_input">
+ <description summary="create a new text input object">
+ Creates a new text-input object for a given seat.
+ </description>
+ <arg name="id" type="new_id" interface="zwp_text_input_v3"/>
+ <arg name="seat" type="object" interface="wl_seat"/>
+ </request>
+ </interface>
+</protocol>
--
2.14.4
More information about the wayland-devel
mailing list