[PATCH v10 wayland_protocols] text-input: Add v3 of the text-input protocol
Jonas Ådahl
jadahl at gmail.com
Mon Jul 30 14:29:05 UTC 2018
On Mon, Jul 30, 2018 at 04:24:00PM +0200, Carlos Garnacho wrote:
> Hey,
>
> With the serial number behavior cleared out, this all reads great to
> me. Can't be part and judge though :), so no R-b label.
I'll put my R-b stamp on it; I think we're good to go now!
Jonas
>
> Cheers,
> Carlos
>
> On Mon, Jul 30, 2018 at 4:14 PM, Dorota Czaplejewicz
> <dorota.czaplejewicz at puri.sm> wrote:
> > From: Carlos Garnacho <carlosg at gnome.org>
> >
> > This new protocol description is an evolution of v2.
> >
> > - All pre-edit text styling is gone.
> > - Pre-edit cursor can span characters.
> > - No events regarding input panel (OSK) state nor covered rectangle.
> > Compositors are still free to handle situations where the keyboard
> > focus rectangle is covered by the input panel.
> > - No set_preferred_language request for clients.
> > - There is no event to send keysyms. Compositors can use wl_keyboard
> > interface instead.
> > - All state is double-buffered, with specified defaults.
> > - The compositor can be notified about external changes to the state.
> > - The client can detect outdated requests.
> >
> > Signed-off-by: Dorota Czaplejewicz <dorota.czaplejewicz at puri.sm>
> > Signed-off-by: Carlos Garnacho <carlosg at gnome.org>
> > ---
> > Hi,
> >
> > this patch applies most recent advice from Jonas. The changes are in commit and done messages and spelled out in my previous email.
> >
> > Cheers,
> > Dorota
> >
> > Makefile.am | 1 +
> > unstable/text-input/text-input-unstable-v3.xml | 435 +++++++++++++++++++++++++
> > 2 files changed, 436 insertions(+)
> > create mode 100644 unstable/text-input/text-input-unstable-v3.xml
> >
> > diff --git a/Makefile.am b/Makefile.am
> > index 4b9a901..86d7ca9 100644
> > --- a/Makefile.am
> > +++ b/Makefile.am
> > @@ -3,6 +3,7 @@ unstable_protocols = \
> > unstable/fullscreen-shell/fullscreen-shell-unstable-v1.xml \
> > unstable/linux-dmabuf/linux-dmabuf-unstable-v1.xml \
> > unstable/text-input/text-input-unstable-v1.xml \
> > + unstable/text-input/text-input-unstable-v3.xml \
> > unstable/input-method/input-method-unstable-v1.xml \
> > unstable/xdg-shell/xdg-shell-unstable-v5.xml \
> > unstable/xdg-shell/xdg-shell-unstable-v6.xml \
> > diff --git a/unstable/text-input/text-input-unstable-v3.xml b/unstable/text-input/text-input-unstable-v3.xml
> > new file mode 100644
> > index 0000000..acf5674
> > --- /dev/null
> > +++ b/unstable/text-input/text-input-unstable-v3.xml
> > @@ -0,0 +1,435 @@
> > +<?xml version="1.0" encoding="UTF-8"?>
> > +
> > +<protocol name="text_input_unstable_v3">
> > + <copyright>
> > + Copyright © 2012, 2013 Intel Corporation
> > + Copyright © 2015, 2016 Jan Arne Petersen
> > + Copyright © 2017, 2018 Red Hat, Inc.
> > + Copyright © 2018 Purism SPC
> > +
> > + Permission to use, copy, modify, distribute, and sell this
> > + software and its documentation for any purpose is hereby granted
> > + without fee, provided that the above copyright notice appear in
> > + all copies and that both that copyright notice and this permission
> > + notice appear in supporting documentation, and that the name of
> > + the copyright holders not be used in advertising or publicity
> > + pertaining to distribution of the software without specific,
> > + written prior permission. The copyright holders make no
> > + representations about the suitability of this software for any
> > + purpose. It is provided "as is" without express or implied
> > + warranty.
> > +
> > + THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
> > + SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
> > + FITNESS, IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY
> > + SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> > + WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
> > + AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
> > + ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
> > + THIS SOFTWARE.
> > + </copyright>
> > +
> > + <interface name="zwp_text_input_v3" version="1">
> > + <description summary="text input">
> > + The zwp_text_input_v3 interface represents text input and input methods
> > + associated with a seat. It provides enter/leave events to follow the
> > + text input focus for a seat.
> > +
> > + Requests are used to enable/disable the text-input object and set
> > + state information like surrounding and selected text or the content type.
> > + The information about the entered text is sent to the text-input object
> > + via the preedit_string and commit_string events.
> > +
> > + Text is valid UTF-8 encoded, indices and lengths are in bytes. Indices
> > + must not point to middle bytes inside a code point: they must either
> > + point to the first byte of a code point or to the end of the buffer.
> > + Lengths must be measured between two valid indices.
> > +
> > + Focus moving throughout surfaces will result in the emission of
> > + zwp_text_input_v3.enter and zwp_text_input_v3.leave events. The focused
> > + surface must commit zwp_text_input_v3.enable and
> > + zwp_text_input_v3.disable requests as the keyboard focus moves across
> > + editable and non-editable elements of the UI. Those two requests are not
> > + expected to be paired with each other, the compositor must be able to
> > + handle consecutive series of the same request.
> > +
> > + State is sent by the state requests (set_surrounding_text,
> > + set_content_type and set_cursor_rectangle) and a commit request. After an
> > + enter event or disable request all state information is invalidated and
> > + needs to be resent by the client.
> > +
> > + This document adheres to the RFC 2119 when using words like "must",
> > + "should", "may", etc.
> > +
> > + Warning! The protocol described in this file is experimental and
> > + backward incompatible changes may be made. Backward compatible changes
> > + may be added together with the corresponding interface version bump.
> > + Backward incompatible changes are done by bumping the version number in
> > + the protocol and interface names and resetting the interface version.
> > + Once the protocol is to be declared stable, the 'z' prefix and the
> > + version number in the protocol and interface names are removed and the
> > + interface version number is reset.
> > + </description>
> > +
> > + <request name="destroy" type="destructor">
> > + <description summary="Destroy the wp_text_input">
> > + Destroy the wp_text_input object. Also disables all surfaces enabled
> > + through this wp_text_input object.
> > + </description>
> > + </request>
> > +
> > + <request name="enable">
> > + <description summary="Request text input to be enabled">
> > + Requests text input on the surface previously obtained from the enter
> > + event.
> > +
> > + This request must be issued every time the active text input changes
> > + to a new one, including within the current surface. Use
> > + zwp_text_input_v3.disable when there is no longer any input focus on
> > + the current surface.
> > +
> > + This request resets all state associated with previous enable, disable,
> > + set_surrounding_text, set_text_change_cause, set_content_type, and
> > + set_cursor_rectangle requests, as well as the state associated with
> > + preedit_string, commit_string, and delete_surrounding_text events.
> > +
> > + The set_surrounding_text, set_content_type and set_cursor_rectangle
> > + requests must follow if the text input supports the necessary
> > + functionality.
> > +
> > + State set with this request is double-buffered. It will get applied on
> > + the next zwp_text_input_v3.commit request, and stay valid until the
> > + next committed enable or disable request.
> > +
> > + The changes must be applied by the compositor after issuing a
> > + zwp_text_input_v3.commit request.
> > + </description>
> > + </request>
> > +
> > + <request name="disable">
> > + <description summary="Disable text input on a surface">
> > + Explicitly disable text input on the current surface (typically when
> > + there is no focus on any text entry inside the surface).
> > +
> > + State set with this request is double-buffered. It will get applied on
> > + the next zwp_text_input_v3.commit request.
> > + </description>
> > + </request>
> > +
> > + <request name="set_surrounding_text">
> > + <description summary="sets the surrounding text">
> > + Sets the surrounding plain text around the input, excluding the preedit
> > + text.
> > +
> > + The client should notify the compositor of any changes in any of the
> > + values carried with this request, including changes caused by handling
> > + incoming text-input events as well as changes caused by other
> > + mechanisms like keyboard typing.
> > +
> > + If the client is unaware of the text around the cursor, it should not
> > + issue this request, to signify lack of support to the compositor.
> > +
> > + Text is UTF-8 encoded, and should include the cursor position, the
> > + complete selection and additional characters before and after them.
> > + There is a maximum length of wayland messages, so text can not be
> > + longer than 4000 bytes.
> > +
> > + Cursor is the byte offset of the cursor within text buffer.
> > +
> > + Anchor is the byte offset of the selection anchor within text buffer.
> > + If there is no selected text, anchor is the same as cursor.
> > +
> > + If any preedit text is present, it is replaced with a cursor for the
> > + purpose of this event.
> > +
> > + Values set with this request are double-buffered. They will get applied
> > + on the next zwp_text_input_v3.commit request, and stay valid until the
> > + next committed enable or disable request.
> > +
> > + The initial state for affected fields is empty, meaning that the text
> > + input does not support sending surrounding text. If the empty values
> > + get applied, subsequent attempts to change them may have no effect.
> > + </description>
> > + <arg name="text" type="string"/>
> > + <arg name="cursor" type="int"/>
> > + <arg name="anchor" type="int"/>
> > + </request>
> > +
> > + <enum name="change_cause">
> > + <description summary="text change reason">
> > + Reason for the change of surrounding text or cursor posision.
> > + </description>
> > + <entry name="input_method" value="0" summary="input method caused the change"/>
> > + <entry name="other" value="1" summary="something else than the input method caused the change"/>
> > + </enum>
> > +
> > + <request name="set_text_change_cause">
> > + <description summary="indicates the cause of surrounding text change">
> > + Tells the compositor why the text surrounding the cursor changed.
> > +
> > + Whenever the client detects an external change in text, cursor, or
> > + anchor posision, it must issue this request to the compositor. This
> > + request is intended to give the input method a chance to update the
> > + preedit text in an appropriate way, e.g. by removing it when the user
> > + starts typing with a keyboard.
> > +
> > + cause describes the source of the change.
> > +
> > + The value set with this request is double-buffered. It must be applied
> > + and reset to initial at the next zwp_text_input_v3.commit request.
> > +
> > + The initial value of cause is input_method.
> > + </description>
> > + <arg name="cause" type="uint" enum="change_cause"/>
> > + </request>
> > +
> > + <enum name="content_hint" bitfield="true">
> > + <description summary="content hint">
> > + Content hint is a bitmask to allow to modify the behavior of the text
> > + input.
> > + </description>
> > + <entry name="none" value="0x0" summary="no special behavior"/>
> > + <entry name="completion" value="0x1" summary="suggest word completions"/>
> > + <entry name="spellcheck" value="0x2" summary="suggest word corrections"/>
> > + <entry name="auto_capitalization" value="0x4" summary="switch to uppercase letters at the start of a sentence"/>
> > + <entry name="lowercase" value="0x8" summary="prefer lowercase letters"/>
> > + <entry name="uppercase" value="0x10" summary="prefer uppercase letters"/>
> > + <entry name="titlecase" value="0x20" summary="prefer casing for titles and headings (can be language dependent)"/>
> > + <entry name="hidden_text" value="0x40" summary="characters should be hidden"/>
> > + <entry name="sensitive_data" value="0x80" summary="typed text should not be stored"/>
> > + <entry name="latin" value="0x100" summary="just Latin characters should be entered"/>
> > + <entry name="multiline" value="0x200" summary="the text input is multiline"/>
> > + </enum>
> > +
> > + <enum name="content_purpose">
> > + <description summary="content purpose">
> > + The content purpose allows to specify the primary purpose of a text
> > + input.
> > +
> > + This allows an input method to show special purpose input panels with
> > + extra characters or to disallow some characters.
> > + </description>
> > + <entry name="normal" value="0" summary="default input, allowing all characters"/>
> > + <entry name="alpha" value="1" summary="allow only alphabetic characters"/>
> > + <entry name="digits" value="2" summary="allow only digits"/>
> > + <entry name="number" value="3" summary="input a number (including decimal separator and sign)"/>
> > + <entry name="phone" value="4" summary="input a phone number"/>
> > + <entry name="url" value="5" summary="input an URL"/>
> > + <entry name="email" value="6" summary="input an email address"/>
> > + <entry name="name" value="7" summary="input a name of a person"/>
> > + <entry name="password" value="8" summary="input a password (combine with sensitive_data hint)"/>
> > + <entry name="pin" value="9" summary="input is a numeric password (combine with sensitive_data hint)"/>
> > + <entry name="date" value="10" summary="input a date"/>
> > + <entry name="time" value="11" summary="input a time"/>
> > + <entry name="datetime" value="12" summary="input a date and time"/>
> > + <entry name="terminal" value="13" summary="input for a terminal"/>
> > + </enum>
> > +
> > + <request name="set_content_type">
> > + <description summary="set content purpose and hint">
> > + Sets the content purpose and content hint. While the purpose is the
> > + basic purpose of an input field, the hint flags allow to modify some of
> > + the behavior.
> > +
> > + Values set with this request are double-buffered. They will get applied
> > + on the next zwp_text_input_v3.commit request.
> > + Subsequent attempts to update them may have no effect. The values
> > + remain valid until the next committed enable or disable request.
> > +
> > + The initial value for hint is none, and the initial value for purpose
> > + is normal.
> > + </description>
> > + <arg name="hint" type="uint" enum="content_hint"/>
> > + <arg name="purpose" type="uint" enum="content_purpose"/>
> > + </request>
> > +
> > + <request name="set_cursor_rectangle">
> > + <description summary="set cursor position">
> > + Marks an area around the cursor as a x, y, width, height rectangle in
> > + surface local coordinates.
> > +
> > + Allows the compositor to put a window with word suggestions near the
> > + cursor, without obstructing the text being input.
> > +
> > + If the client is unaware of the position of edited text, it should not
> > + issue this request, to signify lack of support to the compositor.
> > +
> > + Values set with this request are double-buffered. They will get applied
> > + on the next zwp_text_input_v3.commit request, and stay valid until the
> > + next committed enable or disable request.
> > +
> > + The initial values describing a cursor rectangle are empty. That means
> > + the text input does not support describing the cursor area. If the
> > + empty values get applied, subsequent attempts to change them may have
> > + no effect.
> > + </description>
> > + <arg name="x" type="int"/>
> > + <arg name="y" type="int"/>
> > + <arg name="width" type="int"/>
> > + <arg name="height" type="int"/>
> > + </request>
> > +
> > + <request name="commit">
> > + <description summary="commit state">
> > + Atomically applies state changes recently sent to the compositor.
> > +
> > + The commit request establishes and updates the state of the client, and
> > + must be issued after any changes to apply them.
> > +
> > + Text input state (enabled status, content purpose, content hint,
> > + surrounding text and change cause, cursor rectangle) is conceptually
> > + double-buffered within the context of a text input, i.e. between a
> > + committed enable request and the following committed enable or disable
> > + request.
> > +
> > + Protocol requests modify the pending state, as opposed to the current
> > + state in use by the input method. A commit request atomically applies
> > + all pending state, replacing the current state. After commit, the new
> > + pending state is as documented for each related request.
> > +
> > + Requests are applied in the order of arrival.
> > +
> > + Neither current nor pending state are modified unless noted otherwise.
> > +
> > + The compositor must count the number of commit requests coming from
> > + each zwp_text_input_v3 object and use the count as the serial in done
> > + events.
> > + </description>
> > + </request>
> > +
> > + <event name="enter">
> > + <description summary="enter event">
> > + Notification that this seat's text-input focus is on a certain surface.
> > +
> > + When the seat has the keyboard capability the text-input focus follows
> > + the keyboard focus. This event sets the current surface for the
> > + text-input object.
> > + </description>
> > + <arg name="surface" type="object" interface="wl_surface"/>
> > + </event>
> > +
> > + <event name="leave">
> > + <description summary="leave event">
> > + Notification that this seat's text-input focus is no longer on a
> > + certain surface. The client should reset any preedit string previously
> > + set.
> > +
> > + The leave notification clears the current surface. It is sent before
> > + the enter notification for the new focus.
> > +
> > + When the seat has the keyboard capability the text-input focus follows
> > + the keyboard focus.
> > + </description>
> > + <arg name="surface" type="object" interface="wl_surface"/>
> > + </event>
> > +
> > + <event name="preedit_string">
> > + <description summary="pre-edit">
> > + Notify when a new composing text (pre-edit) should be set at the
> > + current cursor position. Any previously set composing text must be
> > + removed. Any previously existing selected text must be removed.
> > +
> > + The argument text contains the pre-edit string buffer.
> > +
> > + The parameters cursor_begin and cursor_end are counted in bytes
> > + relative to the beginning of the submitted text buffer. Cursor should
> > + be hidden when both are equal to -1.
> > +
> > + They could be represented by the client as a line if both values are
> > + the same, or as a text highlight otherwise.
> > +
> > + Values set with this event are double-buffered. They must be applied
> > + and reset to initial on the next zwp_text_input_v3.done event.
> > +
> > + The initial value of text is an empty string, and cursor_begin,
> > + cursor_end and cursor_hidden are all 0.
> > + </description>
> > + <arg name="text" type="string" allow-null="true"/>
> > + <arg name="cursor_begin" type="int"/>
> > + <arg name="cursor_end" type="int"/>
> > + </event>
> > +
> > + <event name="commit_string">
> > + <description summary="text commit">
> > + Notify when text should be inserted into the editor widget. The text to
> > + commit could be either just a single character after a key press or the
> > + result of some composing (pre-edit).
> > +
> > + Values set with this event are double-buffered. They must be applied
> > + and reset to initial on the next zwp_text_input_v3.done event.
> > +
> > + The initial value of text is an empty string.
> > + </description>
> > + <arg name="text" type="string" allow-null="true"/>
> > + </event>
> > +
> > + <event name="delete_surrounding_text">
> > + <description summary="delete surrounding text">
> > + Notify when the text around the current cursor position should be
> > + deleted.
> > +
> > + Before_length and after_length are the number of bytes before and after
> > + the current cursor index (excluding the selection) to delete.
> > +
> > + If a preedit text is present, in effect before_length is counted from
> > + the beginning of it, and after_length from its end (see done event
> > + sequence).
> > +
> > + Values set with this event are double-buffered. They must be applied
> > + and reset to initial on the next zwp_text_input_v3.done event.
> > +
> > + The initial values of both before_length and after_length are 0.
> > + </description>
> > + <arg name="before_length" type="uint" summary="length of text before current cursor position"/>
> > + <arg name="after_length" type="uint" summary="length of text after current cursor position"/>
> > + </event>
> > +
> > + <event name="done">
> > + <description summary="apply changes">
> > + Instruct the application to apply changes to state requested by the
> > + preedit_string, commit_string and delete_surrounding_text events. The
> > + state relating to these events is double-buffered, and each one
> > + modifies the pending state. This event replaces the current state with
> > + the pending state.
> > +
> > + The application must proceed by evaluating the changes in the following
> > + order:
> > +
> > + 1. Replace existing preedit string with the cursor.
> > + 2. Delete requested surrounding text.
> > + 3. Insert commit string with the cursor at its end.
> > + 4. Calculate surrounding text to send.
> > + 5. Insert new preedit text in cursor position.
> > + 6. Place cursor inside preedit text.
> > +
> > + The serial number reflects the last state of the zwp_text_input_v3
> > + object known to the compositor. The value of the serial argument must
> > + be equal to the number of commit requests already issued on that object.
> > + When the client receives a done event with a serial different than the
> > + number of past commit requests, it must proceed as normal, except it
> > + should not change the current state of the zwp_text_input_v3 object.
> > + <arg name="serial" type="uint"/>
> > + </description>
> > + </event>
> > + </interface>
> > +
> > + <interface name="zwp_text_input_manager_v3" version="1">
> > + <description summary="text input manager">
> > + A factory for text-input objects. This object is a global singleton.
> > + </description>
> > +
> > + <request name="destroy" type="destructor">
> > + <description summary="Destroy the wp_text_input_manager">
> > + Destroy the wp_text_input_manager object.
> > + </description>
> > + </request>
> > +
> > + <request name="get_text_input">
> > + <description summary="create a new text input object">
> > + Creates a new text-input object for a given seat.
> > + </description>
> > + <arg name="id" type="new_id" interface="zwp_text_input_v3"/>
> > + <arg name="seat" type="object" interface="wl_seat"/>
> > + </request>
> > + </interface>
> > +</protocol>
> > --
> > 2.14.4
> >
> _______________________________________________
> wayland-devel mailing list
> wayland-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/wayland-devel
More information about the wayland-devel
mailing list