[RFC PATCH v2 3/3] drm/msm/dpu: Use color_fill property for DPU planes
Jessica Zhang
quic_jesszhan at quicinc.com
Wed Jan 4 01:09:57 UTC 2023
On 12/22/2022 7:12 PM, Dmitry Baryshkov wrote:
> On 23/12/2022 00:14, Jessica Zhang wrote:
>> Initialize and use the color_fill properties for planes in DPU driver. In
>> addition, relax framebuffer requirements within atomic commit path and
>> add checks for NULL framebuffers. Finally, drop DPU_PLANE_COLOR_FILL_FLAG
>> as it's unused.
>>
>> Changes since V2:
>> - Fixed dropped 'const' warning
>> - Dropped use of solid_fill_format
>> - Switched to using drm_plane_solid_fill_enabled helper method
>> - Added helper to convert color fill to BGR888 (Rob)
>> - Added support for solid fill on planes of varying sizes
>> - Removed DPU_PLANE_COLOR_FILL_FLAG
>>
>> Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
>> ---
>> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 9 +++-
>> drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 65 ++++++++++++++---------
>> 2 files changed, 49 insertions(+), 25 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> index 13ce321283ff..0695b70ea1b7 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
>> @@ -409,6 +409,7 @@ static void _dpu_crtc_blend_setup_mixer(struct
>> drm_crtc *crtc,
>> struct drm_plane_state *state;
>> struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state);
>> struct dpu_plane_state *pstate = NULL;
>> + const struct msm_format *fmt;
>> struct dpu_format *format;
>> struct dpu_hw_ctl *ctl = mixer->lm_ctl;
>> @@ -441,7 +442,13 @@ static void _dpu_crtc_blend_setup_mixer(struct
>> drm_crtc *crtc,
>> sspp_idx - SSPP_VIG0,
>> state->fb ? state->fb->base.id : -1);
>> - format = to_dpu_format(msm_framebuffer_format(pstate->base.fb));
>> + if (pstate->base.fb)
>> + fmt = msm_framebuffer_format(pstate->base.fb);
>> + else
>> + fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base,
>> + DRM_FORMAT_ABGR8888, 0);
>> +
>> + format = to_dpu_format(fmt);
>> if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
>> bg_alpha_enable = true;
>> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>> b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>> index 86719020afe2..51a7507373f7 100644
>> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
>> @@ -44,7 +44,6 @@
>> #define DPU_NAME_SIZE 12
>> -#define DPU_PLANE_COLOR_FILL_FLAG BIT(31)
>> #define DPU_ZPOS_MAX 255
>> /* multirect rect index */
>> @@ -105,7 +104,6 @@ struct dpu_plane {
>> enum dpu_sspp pipe;
>> struct dpu_hw_pipe *pipe_hw;
>> - uint32_t color_fill;
>> bool is_error;
>> bool is_rt_pipe;
>> const struct dpu_mdss_cfg *catalog;
>> @@ -678,6 +676,17 @@ static void _dpu_plane_setup_scaler(struct
>> dpu_plane *pdpu,
>> &scaler3_cfg);
>> }
>> +static uint32_t _dpu_plane_get_fill_color(struct drm_solid_fill
>> solid_fill)
>> +{
>> + uint32_t ret = 0;
>> +
>> + ret |= ((uint8_t) solid_fill.b) << 16;
>> + ret |= ((uint8_t) solid_fill.g) << 8;
>> + ret |= ((uint8_t) solid_fill.r);
>> +
>> + return ret;
>> +}
>> +
>> /**
>> * _dpu_plane_color_fill - enables color fill on plane
>> * @pdpu: Pointer to DPU plane object
>> @@ -1001,12 +1010,17 @@ static int dpu_plane_atomic_check(struct
>> drm_plane *plane,
>> dst = drm_plane_state_dest(new_plane_state);
>> - fb_rect.x2 = new_plane_state->fb->width;
>> - fb_rect.y2 = new_plane_state->fb->height;
>> + if (new_plane_state->fb) {
>> + fb_rect.x2 = new_plane_state->fb->width;
>> + fb_rect.y2 = new_plane_state->fb->height;
>> + }
>> max_linewidth = pdpu->catalog->caps->max_linewidth;
>> - fmt = to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
>> + if (new_plane_state->fb)
>> + fmt =
>> to_dpu_format(msm_framebuffer_format(new_plane_state->fb));
>> + else
>> + fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);
>> min_src_size = DPU_FORMAT_IS_YUV(fmt) ? 2 : 1;
>> @@ -1018,7 +1032,7 @@ static int dpu_plane_atomic_check(struct
>> drm_plane *plane,
>> return -EINVAL;
>> /* check src bounds */
>> - } else if (!dpu_plane_validate_src(&src, &fb_rect, min_src_size)) {
>> + } else if (new_plane_state->fb && !dpu_plane_validate_src(&src,
>> &fb_rect, min_src_size)) {
>> DPU_DEBUG_PLANE(pdpu, "invalid source " DRM_RECT_FMT "\n",
>> DRM_RECT_ARG(&src));
>> return -E2BIG;
>> @@ -1086,9 +1100,10 @@ void dpu_plane_flush(struct drm_plane *plane)
>> if (pdpu->is_error)
>> /* force white frame with 100% alpha pipe output on error */
>> _dpu_plane_color_fill(pdpu, 0xFFFFFF, 0xFF);
>> - else if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG)
>> + else if (!(plane->state->fb) &&
>> drm_plane_solid_fill_enabled(plane->state))
>
> And what if the plane has both fb and solid_fill proprety?
Hi Dmitry,
If both the FB and solid_fill are set, then the driver should prioritize
the FB over the solid_fill.
Thanks,
Jessica Zhang
>
>> /* force 100% alpha */
>> - _dpu_plane_color_fill(pdpu, pdpu->color_fill, 0xFF);
>> + _dpu_plane_color_fill(pdpu,
>> _dpu_plane_get_fill_color(plane->state->solid_fill),
>> + 0xFF);
>> else if (pdpu->pipe_hw && pdpu->pipe_hw->ops.setup_csc) {
>> const struct dpu_format *fmt =
>> to_dpu_format(msm_framebuffer_format(plane->state->fb));
>> const struct dpu_csc_cfg *csc_ptr = _dpu_plane_get_csc(pdpu,
>> fmt);
>> @@ -1127,23 +1142,30 @@ static void
>> dpu_plane_sspp_atomic_update(struct drm_plane *plane)
>> struct drm_crtc *crtc = state->crtc;
>> struct drm_framebuffer *fb = state->fb;
>> bool is_rt_pipe, update_qos_remap;
>> - const struct dpu_format *fmt =
>> - to_dpu_format(msm_framebuffer_format(fb));
>> + const struct dpu_format *fmt;
>> struct dpu_hw_pipe_cfg pipe_cfg;
>> - memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
>> -
>> - _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
>> -
>> pstate->pending = true;
>> is_rt_pipe = (dpu_crtc_get_client_type(crtc) != NRT_CLIENT);
>> _dpu_plane_set_qos_ctrl(plane, false, DPU_PLANE_QOS_PANIC_CTRL);
>> - DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u "
>> DRM_RECT_FMT
>> - ", %4.4s ubwc %d\n", fb->base.id,
>> DRM_RECT_FP_ARG(&state->src),
>> - crtc->base.id, DRM_RECT_ARG(&state->dst),
>> - (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
>> + /* override for color fill */
>> + if (!fb && drm_plane_solid_fill_enabled(plane->state)) {
>
> And here too.
>
>> + /* skip remaining processing on color fill */
>> + return;
>> + }
>> +
>> + memset(&pipe_cfg, 0, sizeof(struct dpu_hw_pipe_cfg));
>> +
>> + fmt = to_dpu_format(msm_framebuffer_format(fb));
>> + _dpu_plane_set_scanout(plane, pstate, &pipe_cfg, fb);
>> +
>> + if (fb)
>> + DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u "
>> DRM_RECT_FMT
>> + ", %4.4s ubwc %d\n", fb->base.id,
>> DRM_RECT_FP_ARG(&state->src),
>> + crtc->base.id, DRM_RECT_ARG(&state->dst),
>> + (char *)&fmt->base.pixel_format,
>> DPU_FORMAT_IS_UBWC(fmt));
>> pipe_cfg.src_rect = state->src;
>> @@ -1155,12 +1177,6 @@ static void dpu_plane_sspp_atomic_update(struct
>> drm_plane *plane)
>> pipe_cfg.dst_rect = state->dst;
>> - /* override for color fill */
>> - if (pdpu->color_fill & DPU_PLANE_COLOR_FILL_FLAG) {
>> - /* skip remaining processing on color fill */
>> - return;
>> - }
>> -
>> if (pdpu->pipe_hw->ops.setup_rects) {
>> pdpu->pipe_hw->ops.setup_rects(pdpu->pipe_hw,
>> &pipe_cfg,
>> @@ -1511,6 +1527,7 @@ struct drm_plane *dpu_plane_init(struct
>> drm_device *dev,
>> DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
>> drm_plane_create_alpha_property(plane);
>> + drm_plane_create_solid_fill_property(plane);
>> drm_plane_create_blend_mode_property(plane,
>> BIT(DRM_MODE_BLEND_PIXEL_NONE) |
>> BIT(DRM_MODE_BLEND_PREMULTI) |
>
> --
> With best wishes
> Dmitry
>
More information about the wayland-devel
mailing list