[PATCH RFC v7 06/10] drm/atomic: Move framebuffer checks to helper
Jessica Zhang
quic_jesszhan at quicinc.com
Fri Oct 27 22:32:56 UTC 2023
Currently framebuffer checks happen directly in
drm_atomic_plane_check(). Move these checks into their own helper
method.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Acked-by: Harry Wentland <harry.wentland at amd.com>
Acked-by: Sebastian Wick <sebastian at sebastianwick.net>
Signed-off-by: Jessica Zhang <quic_jesszhan at quicinc.com>
---
drivers/gpu/drm/drm_atomic.c | 130 ++++++++++++++++++++++++-------------------
1 file changed, 73 insertions(+), 57 deletions(-)
diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c
index af778d32785b..48a2df4e3d27 100644
--- a/drivers/gpu/drm/drm_atomic.c
+++ b/drivers/gpu/drm/drm_atomic.c
@@ -589,6 +589,76 @@ plane_switching_crtc(const struct drm_plane_state *old_plane_state,
return true;
}
+static int drm_atomic_plane_check_fb(const struct drm_plane_state *state)
+{
+ struct drm_plane *plane = state->plane;
+ const struct drm_framebuffer *fb = state->fb;
+ struct drm_mode_rect *clips;
+
+ uint32_t num_clips;
+ unsigned int fb_width, fb_height;
+ int ret;
+
+ /* Check whether this plane supports the fb pixel format. */
+ ret = drm_plane_check_pixel_format(plane, fb->format->format,
+ fb->modifier);
+
+ if (ret) {
+ drm_dbg_atomic(plane->dev,
+ "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n",
+ plane->base.id, plane->name,
+ &fb->format->format, fb->modifier);
+ return ret;
+ }
+
+ fb_width = fb->width << 16;
+ fb_height = fb->height << 16;
+
+ /* Make sure source coordinates are inside the fb. */
+ if (state->src_w > fb_width ||
+ state->src_x > fb_width - state->src_w ||
+ state->src_h > fb_height ||
+ state->src_y > fb_height - state->src_h) {
+ drm_dbg_atomic(plane->dev,
+ "[PLANE:%d:%s] invalid source coordinates "
+ "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
+ plane->base.id, plane->name,
+ state->src_w >> 16,
+ ((state->src_w & 0xffff) * 15625) >> 10,
+ state->src_h >> 16,
+ ((state->src_h & 0xffff) * 15625) >> 10,
+ state->src_x >> 16,
+ ((state->src_x & 0xffff) * 15625) >> 10,
+ state->src_y >> 16,
+ ((state->src_y & 0xffff) * 15625) >> 10,
+ fb->width, fb->height);
+ return -ENOSPC;
+ }
+
+ clips = __drm_plane_get_damage_clips(state);
+ num_clips = drm_plane_get_damage_clips_count(state);
+
+ /* Make sure damage clips are valid and inside the fb. */
+ while (num_clips > 0) {
+ if (clips->x1 >= clips->x2 ||
+ clips->y1 >= clips->y2 ||
+ clips->x1 < 0 ||
+ clips->y1 < 0 ||
+ clips->x2 > fb_width ||
+ clips->y2 > fb_height) {
+ drm_dbg_atomic(plane->dev,
+ "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
+ plane->base.id, plane->name, clips->x1,
+ clips->y1, clips->x2, clips->y2);
+ return -EINVAL;
+ }
+ clips++;
+ num_clips--;
+ }
+
+ return 0;
+}
+
/**
* drm_atomic_plane_check - check plane state
* @old_plane_state: old plane state to check
@@ -605,9 +675,6 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
struct drm_plane *plane = new_plane_state->plane;
struct drm_crtc *crtc = new_plane_state->crtc;
const struct drm_framebuffer *fb = new_plane_state->fb;
- unsigned int fb_width, fb_height;
- struct drm_mode_rect *clips;
- uint32_t num_clips;
int ret;
/* either *both* CRTC and FB must be set, or neither */
@@ -634,17 +701,6 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
return -EINVAL;
}
- /* Check whether this plane supports the fb pixel format. */
- ret = drm_plane_check_pixel_format(plane, fb->format->format,
- fb->modifier);
- if (ret) {
- drm_dbg_atomic(plane->dev,
- "[PLANE:%d:%s] invalid pixel format %p4cc, modifier 0x%llx\n",
- plane->base.id, plane->name,
- &fb->format->format, fb->modifier);
- return ret;
- }
-
/* Give drivers some help against integer overflows */
if (new_plane_state->crtc_w > INT_MAX ||
new_plane_state->crtc_x > INT_MAX - (int32_t) new_plane_state->crtc_w ||
@@ -658,50 +714,10 @@ static int drm_atomic_plane_check(const struct drm_plane_state *old_plane_state,
return -ERANGE;
}
- fb_width = fb->width << 16;
- fb_height = fb->height << 16;
- /* Make sure source coordinates are inside the fb. */
- if (new_plane_state->src_w > fb_width ||
- new_plane_state->src_x > fb_width - new_plane_state->src_w ||
- new_plane_state->src_h > fb_height ||
- new_plane_state->src_y > fb_height - new_plane_state->src_h) {
- drm_dbg_atomic(plane->dev,
- "[PLANE:%d:%s] invalid source coordinates "
- "%u.%06ux%u.%06u+%u.%06u+%u.%06u (fb %ux%u)\n",
- plane->base.id, plane->name,
- new_plane_state->src_w >> 16,
- ((new_plane_state->src_w & 0xffff) * 15625) >> 10,
- new_plane_state->src_h >> 16,
- ((new_plane_state->src_h & 0xffff) * 15625) >> 10,
- new_plane_state->src_x >> 16,
- ((new_plane_state->src_x & 0xffff) * 15625) >> 10,
- new_plane_state->src_y >> 16,
- ((new_plane_state->src_y & 0xffff) * 15625) >> 10,
- fb->width, fb->height);
- return -ENOSPC;
- }
-
- clips = __drm_plane_get_damage_clips(new_plane_state);
- num_clips = drm_plane_get_damage_clips_count(new_plane_state);
-
- /* Make sure damage clips are valid and inside the fb. */
- while (num_clips > 0) {
- if (clips->x1 >= clips->x2 ||
- clips->y1 >= clips->y2 ||
- clips->x1 < 0 ||
- clips->y1 < 0 ||
- clips->x2 > fb_width ||
- clips->y2 > fb_height) {
- drm_dbg_atomic(plane->dev,
- "[PLANE:%d:%s] invalid damage clip %d %d %d %d\n",
- plane->base.id, plane->name, clips->x1,
- clips->y1, clips->x2, clips->y2);
- return -EINVAL;
- }
- clips++;
- num_clips--;
- }
+ ret = drm_atomic_plane_check_fb(new_plane_state);
+ if (ret)
+ return ret;
if (plane_switching_crtc(old_plane_state, new_plane_state)) {
drm_dbg_atomic(plane->dev,
--
2.42.0
More information about the wayland-devel
mailing list