[Xcb-commit] 2 commits - .gitignore INSTALL m4 Makefile.am
Arnaud Fontaine
arnau at kemper.freedesktop.org
Sun Mar 6 18:53:53 PST 2011
.gitignore | 82 +++++++++++++++++----
INSTALL | 229 ------------------------------------------------------------
Makefile.am | 14 +++
m4 | 2
4 files changed, 78 insertions(+), 249 deletions(-)
New commits:
commit 0de786c46a81fa10e07ad77ff0992a44abe4ac2b
Author: Gaetan Nadon <memsize at videotron.ca>
Date: Sun Mar 6 17:52:44 2011 -0500
config: generate ChangeLog and INSTALL
By copying a snippet of Makefile for xorg modules.
One side-effect is that Makefile.in is no longer
deleted on maintainer clean. This should never be done as
it leaves your configuration in a half-broken state.
Signed-off-by: Gaetan Nadon <memsize at videotron.ca>
Signed-off-by: Arnaud Fontaine <arnau at mini-dweeb.org>
diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 54caf7c..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,229 +0,0 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
-
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
- These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
- By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
diff --git a/Makefile.am b/Makefile.am
index 50ea787..aa69327 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,7 +1,5 @@
ACLOCAL_AMFLAGS = -I m4
-MAINTAINERCLEANFILES = Makefile.in
-
SUBDIRS = atom aux event
AM_CFLAGS = $(CWARNFLAGS)
@@ -19,3 +17,15 @@ xcbinclude_HEADERS = xcb_util.h
pkgconfig_DATA = xcb-util.pc
EXTRA_DIST = xcb-util.pc.in
+
+MAINTAINERCLEANFILES = ChangeLog INSTALL
+
+.PHONY: ChangeLog INSTALL
+
+INSTALL:
+ $(INSTALL_CMD)
+
+ChangeLog:
+ $(CHANGELOG_CMD)
+
+dist-hook: ChangeLog INSTALL
commit 14747e0ef8dfb6668e2bb2e8a6b0c9ef2dace7b3
Author: Gaetan Nadon <memsize at videotron.ca>
Date: Sun Mar 6 17:52:43 2011 -0500
config: use the default xorg .gitignore file
This will save future maintenance when module structure/tools change.
This patch depends on the util-common-m4 submodule patch in the m4 path
Signed-off-by: Gaetan Nadon <memsize at videotron.ca>
Signed-off-by: Arnaud Fontaine <arnau at mini-dweeb.org>
diff --git a/.gitignore b/.gitignore
index 443f625..fa4026e 100644
--- a/.gitignore
+++ b/.gitignore
@@ -1,31 +1,79 @@
-xcb_util_intro
+#
+# X.Org module default exclusion patterns
+# The next section if for module specific patterns
+#
+# Do not edit the following section
+# GNU Build System (Autotools)
aclocal.m4
-autom4te.cache
+autom4te.cache/
+autoscan.log
+ChangeLog
compile
-depcomp
-install-sh
-libtool
-ltmain.sh
-missing
-mkinstalldirs
config.guess
config.h
config.h.in
config.log
+config-ml.in
+config.py
config.status
+config.status.lineno
config.sub
configure
-configure.lineno
-.deps
-.dirstamp
-.libs
-*.lo
-*.loT
-*.la
+configure.scan
+depcomp
+.deps/
+INSTALL
+install-sh
+.libs/
+libtool
+libtool.m4
+ltmain.sh
+lt~obsolete.m4
+ltoptions.m4
+ltsugar.m4
+ltversion.m4
Makefile
Makefile.in
-stamp-h1
-*.o
+mdate-sh
+missing
+mkinstalldirs
*.pc
+py-compile
+stamp-h?
+symlink-tree
+texinfo.tex
+ylwrap
+
+# Do not edit the following section
+# Edit Compile Debug Document Distribute
+*~
+*.[0-9]
+*.[0-9]x
+*.bak
+*.bin
+core
+*.dll
+*.exe
+*-ISO*.bdf
+*-JIS*.bdf
+*-KOI8*.bdf
+*.kld
+*.ko
+*.ko.cmd
+*.lai
+*.l[oa]
+*.[oa]
+*.obj
+*.patch
+*.so
+*.pcf.gz
+*.pdb
*.tar.bz2
*.tar.gz
+#
+# Add & Override patterns for xinit
+#
+# Edit the following section as needed
+# For example, !report.pc overrides *.pc. See 'man gitignore'
+#
+xcb_util_intro
diff --git a/m4 b/m4
index 55e8069..177e4af 160000
--- a/m4
+++ b/m4
@@ -1 +1 @@
-Subproject commit 55e8069773efd794a91d5fb37bfceeebae2e378a
+Subproject commit 177e4afb9b57a7b7589c15d8a9bd85b4a5524128
More information about the xcb-commit
mailing list