[Bug 2055] New: nv - no flat panel output on GF2 DVI port
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Sat Dec 11 15:15:29 PST 2004
Please do not reply to this email: if you want to comment on the bug, go to
the URL shown below and enter yourcomments there.
https://bugs.freedesktop.org/show_bug.cgi?id=2055
Summary: nv - no flat panel output on GF2 DVI port
Product: xorg
Version: 6.8.0
Platform: PC
OS/Version: Linux
Status: NEW
Severity: normal
Priority: P2
Component: Driver/nVidia
AssignedTo: xorg-bugzilla-noise at freedesktop.org
ReportedBy: clemens at endorphin.org
bin drivers work. free driver don't. But bin drivers are non-free. I'd like to
switch.
Obstacle: I can't use the DVI port on my GF2 with my ACER flat panel. The result
is a blinking gray/white trash on screen.
>From my xorg.conf:
Section "Device"
Identifier "nv-xfreedriver"
Driver "nv"
Option "FlatPanel"
Option "CrtcNumber" "1"
EndSection
I diffed the logs of the nvidia driver against the nv driver, so you can see
what's different (a bit hand edited to cut it's length)
--- NV.log 2004-12-11 23:21:06.000000000 +0100
+++ Xfree.log 2004-12-11 23:21:02.000000000 +0100
@@ -11,12 +11,12 @@
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
-(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 11 23:20:13 2004
-(==) Using config file: "/etc/X11/xorg.conf"
+(==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 11 23:19:42 2004
+(++) Using config file: "xf.conf"
(==) ServerLayout "Main Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "AL1721"
-(**) | |-->Device "nv-bindriver"
+(**) | |-->Device "nv-xfreedriver"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbRules" "xfree86"
@@ -59,7 +59,8 @@
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
-(++) using VT number 7
+Using vt 7
+(--) using VT number 7
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
@@ -248,11 +249,12 @@
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
-(II) LoadModule: "nvidia"
-(II) Loading /usr/X11R6/lib/modules/drivers/nvidia_drv.o
-(II) Module nvidia: vendor="NVIDIA Corporation"
- compiled for 4.0.2, module version = 1.0.6629
- Module class: XFree86 Video Driver
+(II) LoadModule: "nv"
+(II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o
+(II) Module nv: vendor="X.Org Foundation"
+ compiled for 6.8.0, module version = 1.0.1
+ Module class: X.Org Video Driver
+ ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="X.Org Foundation"
@@ -265,11 +267,39 @@
compiled for 6.8.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.4
-(II) NVIDIA X Driver 1.0-6629 Wed Nov 3 13:14:07 PST 2004
-(II) NVIDIA Unified Driver for all NVIDIA GPUs
+(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
+ Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
+ [list of supported cards]
+ GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
+ GeForce FX 5700VE, 0x0345, GeForce FX Go5700, GeForce FX Go5700,
+ 0x0349, 0x034B, Quadro FX Go1000, Quadro FX 1100, 0x034F
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
-(--) Chipset NVIDIA GPU found
+(--) Chipset GeForce2 MX/MX 400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
@@ -334,125 +364,197 @@
[31] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[32] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
-(**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
-(==) NVIDIA(0): RGB weight 565
-(==) NVIDIA(0): Default visual is TrueColor
-(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
-(**) NVIDIA(0): Option "NvAGP" "1"
-(**) NVIDIA(0): Option "RenderAccel" "on"
-(**) NVIDIA(0): Enabling experimental RENDER acceleration
-(**) NVIDIA(0): Use of NVIDIA internal AGP requested
-(--) NVIDIA(0): Linear framebuffer at 0xE8000000
-(--) NVIDIA(0): MMIO registers at 0xFD000000
-(II) NVIDIA(0): NVIDIA GPU detected as: GeForce2 MX/MX 400
-(--) NVIDIA(0): VideoBIOS: 03.11.00.07.00
-(--) NVIDIA(0): Interlaced video modes are not supported on this GPU
-(II) NVIDIA(0): Detected AGP rate: 4X
-(--) NVIDIA(0): VideoRAM: 32768 kBytes
-(II) NVIDIA(0): Connected display device(s): DFP-0
-(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 8 bpp: 350 MHz
-(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 16 bpp: 350 MHz
-(--) NVIDIA(0): Display device DFP-0: maximum pixel clock at 32 bpp: 300 MHz
+(II) Loading sub module "int10"
+(II) LoadModule: "int10"
+(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
+(II) Module int10: vendor="X.Org Foundation"
+ compiled for 6.8.0, module version = 1.0.0
+ ABI class: X.Org Video Driver, version 0.7
+(II) NV(0): Initializing int10
+(II) NV(0): Primary V_BIOS segment is: 0xc000
+(--) NV(0): Chipset: "GeForce2 MX/MX 400"
+(**) NV(0): Depth 16, (--) framebuffer bpp 16
+(==) NV(0): RGB weight 565
+(==) NV(0): Default visual is TrueColor
+(II) Loading sub module "vgahw"
+(II) LoadModule: "vgahw"
+(II) Loading /usr/X11R6/lib/modules/libvgahw.a
+(II) Module vgahw: vendor="X.Org Foundation"
+ compiled for 6.8.0, module version = 0.1.0
+ ABI class: X.Org Video Driver, version 0.7
+(**) NV(0): Option "FlatPanel"
+(**) NV(0): Option "CrtcNumber" "1"
+(==) NV(0): Using HW cursor
+(**) NV(0): forcing DFP usage
+(--) NV(0): Linear framebuffer at 0xE8000000
+(--) NV(0): MMIO registers at 0xFD000000
+(II) Loading sub module "i2c"
+(II) LoadModule: "i2c"
+(II) Loading /usr/X11R6/lib/modules/libi2c.a
+(II) Module i2c: vendor="X.Org Foundation"
+ compiled for 6.8.0, module version = 1.2.0
+ ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
-(II) NVIDIA(0): AL1721: Using hsync range of 30.00-64.00 kHz
-(II) NVIDIA(0): AL1721: Using hsync value of 80.00 kHz
-(II) NVIDIA(0): AL1721: Using vrefresh value of 75.00 Hz
-(II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz
-(II) NVIDIA(0): Not using mode "640x480" (vrefresh out of range)
-(II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
-[list of failing modes]
-(**) NVIDIA(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
-(--) NVIDIA(0): Display dimensions: (340, 270) mm
-(--) NVIDIA(0): DPI set to (95, 96)
+(II) NV(0): I2C bus "DDC" initialized.
+(II) NV(0): Probing for EDID on I2C bus A...
+(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
+(II) NV(0): I2C device "DDC:ddc2" removed.
+(II) NV(0): ... none found
+(II) NV(0): Probing for EDID on I2C bus B...
+(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
+(II) NV(0): I2C device "DDC:ddc2" removed.
+(--) NV(0): DDC detected a DFP:
+(II) NV(0): Manufacturer: ACR Model: ad04 Serial#: 1076890133
+(II) NV(0): Year: 2004 Week: 3
+(II) NV(0): EDID Version: 1.3
+(II) NV(0): Digital Display Input
+(II) NV(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
+(II) NV(0): Gamma: 2.07
+(II) NV(0): DPMS capabilities: Off; RGB/Color Display
+(II) NV(0): First detailed timing is preferred mode
+(II) NV(0): redX: 0.640 redY: 0.340 greenX: 0.289 greenY: 0.609
+(II) NV(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.329
+(II) NV(0): Supported VESA Video Modes:
+(II) NV(0): 720x400 at 70Hz
+(II) NV(0): 640x480 at 60Hz
+(II) NV(0): 640x480 at 75Hz
+(II) NV(0): 800x600 at 60Hz
+(II) NV(0): 800x600 at 75Hz
+(II) NV(0): 1024x768 at 60Hz
+(II) NV(0): 1024x768 at 70Hz
+(II) NV(0): 1024x768 at 75Hz
+(II) NV(0): 1280x1024 at 75Hz
+(II) NV(0): Manufacturer's mask: 0
+(II) NV(0): Supported Future Video Modes:
+(II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
+(II) NV(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
+(II) NV(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
+(II) NV(0): #3: hsize: 1024 vsize 768 refresh: 60 vid: 16481
+(II) NV(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293
+(II) NV(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
+(II) NV(0): Supported additional Video Mode:
+(II) NV(0): clock: 108.0 MHz Image Size: 340 x 270 mm
+(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
+(II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
+(II) NV(0): Serial No: ETL0408027
+(II) NV(0): Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock
max 140 MHz
+(II) NV(0): Monitor name: Acer AL1721
+(--) NV(0): CRTC 0 is currently programmed for DFP
+(**) NV(0): Forcing display type to DFP as specified
+(**) NV(0): Forcing CRTCNumber 1 as specified
+(II) NV(0): Using DFP on CRTC 1
+(--) NV(0): Panel size is 1 x 1
+(--) NV(0): VideoRAM: 32768 kBytes
+(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
+(II) NV(0): AL1721: Using hsync range of 30.00-64.00 kHz
+(II) NV(0): AL1721: Using hsync value of 80.00 kHz
+(II) NV(0): AL1721: Using vrefresh value of 75.00 Hz
+(II) NV(0): Clock range: 12.00 to 350.00 MHz
+(II) NV(0): Not using mode "640x480" (vrefresh out of range)
+(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
+(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
+ [list of failing modes]
+(II) NV(0): Not using default mode "2048x1536" (width too large for virtual size)
+(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
+(**) NV(0): Virtual size is 1280x1024 (pitch 1280)
+(**) NV(0): *Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz
+(II) NV(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028
1066 +hsync +vsync
+(**) NV(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
+(II) NV(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800
+hsync +vsync
+(**) NV(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
+(II) NV(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667
-hsync -vsync
+(**) NV(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
+(II) NV(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
+hsync +vsync
+(--) NV(0): Display dimensions: (340, 270) mm
+(--) NV(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="X.Org Foundation"
compiled for 6.8.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
+(II) Loading sub module "xaa"
+(II) LoadModule: "xaa"
+(II) Loading /usr/X11R6/lib/modules/libxaa.a
+(II) Module xaa: vendor="X.Org Foundation"
+ compiled for 6.8.0, module version = 1.2.0
+ ABI class: X.Org Video Driver, version 0.7
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
@@ -496,15 +598,24 @@
[32] -1 0 0x0000ef00 - 0x0000ef1f (0x20) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
-(II) NVIDIA(0): Setting mode "1280x1024"
-(II) Loading extension NV-GLX
-(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
-(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
-(==) NVIDIA(0): Backing store disabled
-(==) NVIDIA(0): Silken mouse enabled
+(==) NV(0): Write-combining range (0xe8000000,0x2000000)
+(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
+ Screen to screen bit blits
+ Solid filled rectangles
+ 8x8 mono pattern filled rectangles
+ Indirect CPU to Screen color expansion
+ Solid Lines
+ Scanline Image Writes
+ Offscreen Pixmaps
+ Setting up tile and stipple cache:
+ 32 128x128 slots
+ 32 256x256 slots
+ 16 512x512 slots
+(==) NV(0): Backing store disabled
+(==) NV(0): Silken mouse enabled
(**) Option "dpms"
-(**) NVIDIA(0): DPMS enabled
-(II) Loading extension NV-CONTROL
+(**) NV(0): DPMS enabled
+(WW) NV(0): Option "RenderAccel" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
@@ -521,7 +632,7 @@
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
-(II) Initializing extension GLX
+(EE) Failed to initialize GLX extension (NVIDIA X driver not found)
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/usbmouse"
(**) Mouse1: Protocol: "IMPS/2"
@@ -551,7 +662,6 @@
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
-(II) XINPUT: Adding extended input device "NVIDIA Event Handler" (type: Other)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/local/, removing from
list!
Could not init font path element /usr/X11R6/lib/X11/fonts/CID/, removing from list!
--
I'm running 6.8.0 on Gentoo. But I don't think upgrading would help, the xfree86
syncs don't appear to have brought something new which could be relevant to my
issue (at least judging on the CVS commit logs..)
--
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
More information about the xorg-bugzilla-noise
mailing list