[Bug 1669] default mode order prevails over the recommended mode on
LCD
bugzilla-daemon at freedesktop.org
bugzilla-daemon at freedesktop.org
Thu Oct 21 07:41:38 PDT 2004
Please do not reply to this email: if you want to comment on the bug, go to
the URL shown below and enter yourcomments there.
https://freedesktop.org/bugzilla/show_bug.cgi?id=1669
------- Additional Comments From apodtele at ucsd.edu 2004-10-21 07:41 -------
It seems to me that, despite 1280x1024 at 75Hz is supported and announced, the
monitor clearly states that it prefers 1280x1024 at 60Hz.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) R128(0): VESA VBE DDC supported
(II) R128(0): VESA VBE DDC Level 2
(II) R128(0): VESA VBE DDC transfer in appr. 2 sec.
(II) R128(0): VESA VBE DDC read successfully
(II) R128(0): Manufacturer: DEL Model: 3010 Serial#: 1095191382
(II) R128(0): Year: 2004 Week: 35
(II) R128(0): EDID Version: 1.3
(II) R128(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) R128(0): Sync: Separate Composite SyncOnGreen
(II) R128(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) R128(0): Gamma: 2.20
(II) R128(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) R128(0): Default color space is primary color space
(II) R128(0): First detailed timing is preferred mode
(II) R128(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
(II) R128(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
(II) R128(0): Supported VESA Video Modes:
(II) R128(0): 720x400 at 70Hz
(II) R128(0): 640x480 at 60Hz
(II) R128(0): 640x480 at 75Hz
(II) R128(0): 800x600 at 60Hz
(II) R128(0): 800x600 at 75Hz
(II) R128(0): 1024x768 at 60Hz
(II) R128(0): 1024x768 at 75Hz
(II) R128(0): 1280x1024 at 75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported Future Video Modes:
(II) R128(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) R128(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) R128(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688
h_border: 0
(II) R128(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066
v_border: 0
(II) R128(0): Serial No: 2Y31148OAGKV
(II) R128(0): Monitor name: DELL 1703FP
(II) R128(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 80 kHz,
PixClock max 140 MHz
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(==) R128(0): Write-combining range (0xe0000000,0x1000000)
--
Configure bugmail: https://freedesktop.org/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
More information about the xorg-bugzilla-noise
mailing list