[Bug 2585] New: i810 driver doesn't support intel E7221 gfx

[bugzilla-daemon at freedesktop.org]

Please do not reply to this email: if you want to comment on the bug, go to    
       
the URL shown below and enter yourcomments there.     
   
https://bugs.freedesktop.org/show_bug.cgi?id=2585          
     
           Summary: i810 driver doesn't support intel E7221 gfx
           Product: xorg
           Version: 6.8.2
          Platform: PC
        OS/Version: Linux
            Status: NEW
          Severity: normal
          Priority: P2
         Component: Driver/i810
        AssignedTo: xorg-bugzilla-noise at freedesktop.org
        ReportedBy: liverbugg at juno.com


I have a Dell Poweredge SC420 with the Intel E7221 chipset.  The E7221 is the
server version of the 915 chipset.  I have the i915 kernel module loaded and my
xorg.conf setup to use i810.  This is what i see at the end of my log:

(II) LoadModule: "i810"
(II) Loading /usr/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
        compiled for 6.8.2, module version = 1.3.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
...
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
        i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G
(II) Primary Device is: PCI 00:02:0
(EE) No devices detected.

I also tried the module from http://www.fairlite.demon.co.uk/intel.html

(II) LoadModule: "i810"
(II) Loading /usr/lib/modules/drivers/i810_drv.o
(II) Module i810: vendor="X.Org Foundation"
        compiled for 6.8.1.99, module version = 1.5.3
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 0.7
...
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
        i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, 915GM
(II) Primary Device is: PCI 00:02:0
(EE) No devices detected.

lspci -vvv
0000:00:02.0 VGA compatible controller: Intel Corp. E7221 Integrated Graphics Co
ntroller (rev 04) (prog-if 00 [VGA])
        Subsystem: Dell: Unknown device 0180
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at dff80000 (32-bit, non-prefetchable)
        Region 1: I/O ports at ecd8 [size=8]
        Region 2: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Region 3: Memory at dff40000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot
-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

I'll attach my config and the full log.          
     
     
--           
Configure bugmail: https://bugs.freedesktop.org/userprefs.cgi?tab=email         
     
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.