[xorg-commit-diffs] xc/config/cf xorg.cf, NONE, 1.1.8.1 xorg.tmpl,
NONE, 1.1.8.1 xorgsite.def, NONE, 1.1.8.1
Roland Mainz
xorg-commit at pdx.freedesktop.org
Sat Apr 10 03:08:45 PDT 2004
- Previous message: [xorg-commit-diffs] xc BUILD, NONE, 1.1.4.1 ChangeLog, NONE,
1.1.4.1 README, NONE, 1.1.4.1 CHANGELOG-CURRENT, 1.1.2.8,
NONE CHANGELOG-RELEASE-1, 1.1.2.36, NONE INSTALL.TXT, 1.1,
NONE RELNOTES.TXT, 1.1, NONE RELNOTES.XORG, 1.1.2.5,
NONE bug-report, 1.1.4.1, NONE
- Next message: [xorg-commit-diffs] xc/doc/misc INSTALL.ms, 1.1.4.1.6.1,
NONE RELNOTES.ms, 1.1.4.1.6.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
Committed by: gisburn
Update of /cvs/xorg/xc/config/cf
In directory pdx:/tmp/cvs-serv15087/xc/config/cf
Added Files:
Tag: XPRINT
xorg.cf xorg.tmpl xorgsite.def
Log Message:
Resync to 2004-04-10 XORG-RELEASE-1 branch (step 2: Adding missing files and removing obsolete ones)
--- NEW FILE: xorg.cf ---
XCOMM $XdotOrg: xc/config/cf/xorg.cf,v 1.1.8.1 2004/04/10 10:08:41 gisburn Exp $
/*
* This configuration file contains all of the configuration
* information for the Xorg based X Servers.
*
* Most of these settings can be overridden in a vendor.cf or the
* BeforeVendor part of the site.def file.
*/
XCOMM $Xorg: xfree86.cf,v 1.4 2000/08/17 19:41:49 cpqbld Exp $
/* Get and set version information. */
#include "date.def"
#define XORG_VERSION_MAJOR 6
#define XORG_VERSION_MINOR 7
#define XORG_VERSION_PATCH 0
#define XORG_VERSION_SNAP 0
[...1988 lines suppressed...]
|| defined (AlphaArchitecture) \
|| defined (ia64Architecture) \
|| defined (PpcArchitecture) \
|| defined (SparcArchitecture) \
|| defined (s390xArchitecture)
# define StaticNeedsPicForShared YES
# else
# define StaticNeedsPicForShared NO
# endif
#endif
#ifndef XF8_32Wid
# define XF8_32Wid NO
#endif
#if CrossCompiling
#include <cross.def>
#endif
#include <xf86.rules>
--- NEW FILE: xorg.tmpl ---
XCOMM $Xorg: xf86.tmpl,v 1.3 2000/08/17 19:41:48 cpqbld Exp $
XCOMM $XdotOrg: xc/config/cf/xorg.tmpl,v 1.1.8.1 2004/04/10 10:08:41 gisburn Exp $
#ifndef ConfigDefines
# define ConfigDefines -D__XCONFIGFILE__='"$(XCONFIGFILE)"' \
-D__XCONFIGDIR__='"$(XCONFIGDIR)"' -D__XLOGFILE__='"$(XLOGFILE)"' \
-D__XSERVERNAME__='"$(XSERVERNAME)"'
#endif
CONFIG_DEFINES = ConfigDefines
#ifndef ServerDefines
#define ServerDefines StandardDefines VersionDefines
#endif
#ifdef BuilderEMailAddr
BUILDERADDR = BuilderEMailAddr
#else
BUILDERADDR = "xorg at freedesktop.org"
#endif
#ifdef VendorSupportAddress
VENDORSUPPORT = VendorSupportAddress
BUGMSG = -DBUILDERADDR='$(BUILDERADDR)' -DVENDORSUPPORT='$(VENDORSUPPORT)'
#else
BUGMSG = -DBUILDERADDR='$(BUILDERADDR)'
#endif
#if defined(XF86DriverSDK)
BUILDMODULEDIR = $(DRIVERSDKMODULEDIR)
BUILDMODULETOP = ..
TOP_INCLUDES = TopIncludes
IMAKE_DEFINES = -DXF86DriverSDK=1
#ifdef UseInstalled
IMAKE_CMD = $(IMAKE) -DUseInstalled -I$(TOP) -I$(IRULESRC) \
$(IMAKE_DEFINES) $(IMAKE_WARNINGS)
#else
IMAKE_CMD = $(IMAKE) -I$(TOP) -I$(IRULESRC) \
$(IMAKE_DEFINES) $(IMAKE_WARNINGS)
#endif
#undef ImakeSubCmdHelper
#ifdef UseInstalled
#define ImakeSubCmdHelper $(IMAKE) -DUseInstalled -I$(IMAKETOP) \
-I$(IRULESRC) $(IMAKE_DEFINES) $(IMAKE_WARNINGS)
#else
#define ImakeSubCmdHelper $(IMAKEPREFIX)$(IMAKE) -I$(IMAKETOP) \
$(IMAKE_DEFINES) $(IMAKE_WARNINGS) \
-I$(IMAKEPREFIX)$(IRULESRC)
#endif
#endif
#ifndef JoystickSupport
#define JoystickSupport NO
#endif
/*
* Module support: These overrides must be here, not in xf86.rules,
* because they will replace rules after having seen the first lines
* of Imakefile (include <Server.tmpl>)
*/
#ifndef HasGccStackProtector
#define HasGccStackProtector NO
#endif
#if HasGccStackProtector
MODULE_GCC_FLAGS1 = -fno-stack-protector
#endif
#ifndef HasGccMergeConstants
#define HasGccMergeConstants NO
#endif
#if HasGccMergeConstants && DoLoadableServer && !MakeDllModules
MODULE_GCC_FLAGS2 = -fno-merge-constants
#endif
MODULE_GCC_FLAGS = $(MODULE_GCC_FLAGS1) $(MODULE_GCC_FLAGS2)
#if defined(IHaveModules) && MakeDllModules
MODULE_PIC_FLAGS = $(PICFLAGS)
#endif
MODULE_CFLAGS = $(MODULE_PIC_FLAGS) $(MODULE_GCC_FLAGS)
#if defined(IHaveModules)
# if DoLoadableServer
MODULE_DEFINES = -DIN_MODULE -DXFree86Module
# else
MODULE_DEFINES = -DXFree86Module
# endif
#endif
#if defined(IHaveModules) && DoLoadableServer
/* This overrides the ObjCompile in Imake.rules! */
#undef ObjectCompile
#define ObjectCompile(options) RemoveFile($@) @@\
ClearmakeOSName\
$(MODCC) $(MODCFLAGS) options -c $*.c
/* This overrides an AssembleObject in xf86.rules or in an os-dependent
* rules file (currently only minix.cf and os2.rules (uncritical))
*/
#define ModCPPOnlyAsm(basename,options) RemoveFile(basename.i) @@\
$(MODCPP) AsmDefines $(DEFINES) $(INCLUDES) options basename.S | \ @@\
grep -v '^\#' > basename.i
#undef AssembleObject
#define AssembleObject(flags) ModCPPOnlyAsm($*,flags) @@\
RemoveFile($*.o) @@\
$(MODAS) $(MODASFLAGS) -o $*.o $*.i @@\
RemoveFile($*.i)
/* This overrides the NormalRelocatableTarget in Imake.rules */
#undef NormalRelocatableTarget
#define NormalRelocatableTarget(objname,objlist) @@\
AllTarget(objname.Osuf) @@\
@@\
objname.Osuf: objlist $(EXTRALIBRARYDEPS) @@\
RemoveFile($@) @@\
$(MODLD) $(MODLDCOMBINEFLAGS) objlist -o $@
/* This overrides the NormalDepRelocatableTarget in Imake.rules */
#undef NormalDepRelocatableTarget
#define NormalDepRelocatableTarget(objname,deplist,objlist) @@\
AllTarget(objname.Osuf) @@\
@@\
objname.Osuf: deplist $(EXTRALIBRARYDEPS) @@\
RemoveFile($@) @@\
$(MODLD) $(MODLDCOMBINEFLAGS) objlist -o $@
/* This overrides the RanLibrary in Imake.rules */
#if DoRanlibCmd || NeedModuleRanlib
#undef RanLibrary
#define RanLibrary(args) $(MODRANLIB) args
#endif
/* This overrides the MakeLibrary rule in Imake.rules */
#undef MakeLibrary
#define MakeLibrary(libname,objlist) $(MODAR) libname objlist
/* This overrides the LibraryTargetName rule in Imake.rules */
#undef LibraryTargetName
#define LibraryTargetName(libname)Concat(lib,libname.a)
/* This disables an OS/2 rule */
#undef BuildLibSupportLibs
#define BuildLibSupportLibs(dummy)
#endif /* IHaveModules */
--- NEW FILE: xorgsite.def ---
XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
/******************************************************************************/
/*
* This file is to provide a quick method for most people to change the
* behaviour of their XFree86 installation without having to fully
* understand the workings of site.def and all the various '.cf' files.
*
* In the vast majority of cases, it should not be necessary to use this
* file at all or change it in any way.
*
* This file is divided into two sections. The first contains settings
* that end-users might reasonably change. The second contains settings
* that developers might want to change.
*
* IMPORTANT NOTE: In all cases changing the defaults may cause problems
* and/or unexpected side-effects. If you don't understand what a setting
* does, then it's best to not change it. If you make changes and have
* problems, verify that those problems are also present when using an
* empty host.def file and unchanged version of this file before reporting
* them.
*
* A good way to use this file is to copy it to host.def, and make the
* changes there. That way, future patches to this file won't fail.
* The host.def file will never be patched.
*
* The distributed version of this file MUST contain no uncommented
* definitions. Default definitions belong in xfree86.cf, or <vendor>.cf
* files.
*/
/******************************************************************************/
/*
* If you have build-specific modifications in your host.def file, but
* want an empty host.def file installed when doing 'make install',
* uncomment the following
*
#define InstallEmptyHostDef
*/
/*
* Which servers to build. There is only Xorg server.
* It can be disabled by the following.
*
#define XorgServer NO
*/
/*
* To disable building the Xnest server, uncomment this.
*
#define XnestServer NO
*/
/*
* To disable building Xvfb, uncomment this.
*
#define XVirtualFramebufferServer NO
*/
/*
* To disable building Xprt, uncomment this.
*
#define XprtServer NO
*/
/*
* Set the default server (ie the one that gets the sym-link to "X")
*
#define ServerToInstall XFree86
*/
/*
* If you only run the X server under xdm the X servers don't need to be
* installed SetUID, and you may comment out the lines below. If you run
* the servers by hand (with xinit or startx), then they do need to be
* installed SetUID on most platforms.
*
* Consult your system administrator before making the X server setuid.
*
#define InstallXserverSetUID NO
*/
/*
* Server configuration parameters. The defaults are shown here:
*/
/*
* Which drivers to build. When building a static server, each of these
* will be included in it. When building the loadable server each of these
* modules will be built.
*
#define XF86CardDrivers mga glint nv tga s3virge sis rendition \
neomagic i740 tdfx savage \
cirrus vmware tseng trident chips apm \
GlideDriver fbdev i128 \
ati AgpGartDrivers DevelDrivers ark cyrix \
siliconmotion \
vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
*/
/*
* To add third party drivers to the standard driver list, set the
* following.
*
#define XF86ExtraCardDrivers extradriver1 extradriver2 ...
*/
/*
* Select the XInput devices you want by uncommenting this.
*
#define XInputDrivers mouse keyboard acecad calcomp citron \
digitaledge dmc dynapro elographics \
microtouch mutouch penmount spaceorb summa \
wacom void magictouch aiptek
*/
/*
* There are three parameters that determine where and how the Matrox HAL
* library is used:
*
* HaveMatroxHal -- You have the HALlib.a binary library installed
* in xfree86/drivers/mga/HALlib, and you want it to
* be used.
* Default: NO
*
* BuildMatroxHal -- You have the source for the HALlib library (installed
* in xfree86/drivers/mga/hallib), and want to build and
* use it.
* Default: NO
*
* UseMatroxHal -- You want to build support for loading/using the HAL
* library into the mga driver. For module server builds
* you don't need to have the HALlib library to do this.
* but you want to build support for loading it and using
* it into the mga driver module.
* Default: YES for loadable server build
* (HaveMatroxHal || BuildMatroxHal) for static
*/
/*
* To disable use of the Matrox HAL library, uncomment this:
*
#define UseMatroxHal NO
*/
/*
* If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib,
* uncomment this:
*
#define HaveMatroxHal YES
*/
/*
* If you have the HALlib source code installed in xfree86/drivers/mga/hallib,
* uncomment this:
#define BuildMatroxHal YES
*/
/*
* To disable building the font server, uncomment this.
*
#define BuildFontServer NO
*/
/*
* To disable support for Speedo fonts, uncomment this.
*
#define BuildSpeedo NO
*/
/*
* To disable support for Type1 fonts, uncomment this.
*
#define BuildType1 NO
*/
/*
* To disable support for CID fonts, uncomment this.
*
#define BuildCID NO
*/
/*
* To disable support for TrueType fonts, uncomment these.
*
#define BuildFreeType NO
#define BuildXTrueType NO
*/
/*
* To set non-default build options for the underlying FreeType libraries,
* add them here and uncomment.
*
#define Freetype2BuildDefines -DFREETYPE_BUILD_DEFINES
*/
/*
* If you want to use FreeType 1.x build options that differ from the FreeType2
* build options, set them here and uncomment. Otherwise the Freetype2 build
* options will be used for both FreeType 2.x and 1.x. Note: FreeType 1.x
* is currently only used for the X-TrueType (xtt) module.
*
#define Freetype1BuildDefines -DFREETYPE1_BUILD_DEFINES
*/
/*
* To build the FreeType libraries with the TrueType byte code interpreter
* enabled, uncomment this. Note that there are patent issues related to the
* TrueType byte code interpreter, and we only recommend you enabling this
* if you are sure that there are no legal impediments to you doing so. See
* <http://www.freetype.org/patents.html> for further information.
*
#define Freetype2BuildDefines -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER
*/
/*
* Do you want to Build Fonts (Usually you only want to build and install
* fonts once, if this is a first time install you will want to build the
* fonts)
*
#define BuildFonts NO
*/
/*
* To not build/install the 75dpi fonts, uncomment the following
*
#define Build75DpiFonts NO
*/
/*
* To not build/install the 100dpi fonts, uncomment the following
*
#define Build100DpiFonts NO
*/
/*
* To not build/install the Speedo fonts, uncomment the following
*
#define BuildSpeedoFonts NO
*/
/*
* To not build/install the Type1 fonts, uncomment the following
*
#define BuildType1Fonts NO
*/
/*
* To not build/install the CID fonts, uncomment the following
*
#define BuildCIDFonts NO
*/
/*
* To not build/install the True Type fonts, uncomment the following
*
#define BuildTrueTypeFonts NO
*/
/*
* To not build/install the Cyrillic fonts, uncomment the following
*
#define BuildCyrillicFonts NO
*/
/*
* To not install the local font directory, uncomment the following
*
#define MakeLocalFontDir NO
*/
/*
* To build only the servers with a cut-down source tree, uncomment
* this.
*
#define BuildServersOnly YES
*/
/*
* By default, the sample config files for xinit, xdm and xfs are installed
* only when there is no pre-existing version installed. Uncommenting the
* following lines will force the sample versions to be installed even if
* it means over-writing existing versions.
*
#define InstallXinitConfig YES
#define InstallXdmConfig YES
#define InstallFSConfig YES
*/
/*
* By default the application defaults files are always installed.
* Uncommenting the the following will prevent exising application
* defaults files from being over-written.
*
#define InstallAppDefFiles NO
*/
/*
* Undefine the following if you don't want to have config files and
* app-defaults installed in a separate directory (i.e. /etc/X11).
*
#define UseSeparateConfDir NO
*/
/*
* To enable building the glide driver, you need to define
* HasGlide2 to YES and set the Glide2IncDir variable.
* HasGlide2 is per default NO.
*
#define HasGlide2 YES
*/
/*
* Set the path to your Glide include files.
*
#define Glide2IncDir /usr/include/glide
*/
/*
* Have glide 3?
*
#define HasGlide3 YES
*/
/*
* Set the path to your Glide 3 include files.
*
#define Glide3IncDir /usr/include/glide3
*/
/*
* Unless you're a developer you shouldn't need to change anything
* beyond this point.
*/
/*
* If you want to enable some developer settings, like more verbose
* compiler warnings, uncomment this.
*
#define XFree86Devel YES
*/
/*
* The default optimisation flags for GCC 2.x. -fno-strength-reduce is
* here to work around a bug in -O2 for GCC 2.x on i386 platforms.
* If you are using a version that doesn't have this bug, you can
* uncomment the following line, and remove '-fno-strength-reduce'
* If you are building binaries for a 486, it may be beneficial to add
* -m486
*
#define DefaultGcc2i386Opt -O2 -fno-strength-reduce
*/
/*
* This allows the GCC warning flags to be set. The default is shown here.
*
#define GccWarningOptions -Wall -Wpointer-arith -Wstrict-prototypes \
-Wmissing-prototypes -Wmissing-declarations \
-Wredundant-decls -Wnested-externs
*/
/*
* Sun Compiler stuff..
*
#define HasSunC YES
#define HasSunCplusplus YES
#define CplusplusCompilerMajorVersion 5
#define CplusplusCompilerMinorVersion 0
#define CCompilerMajorVersion 5
#define CCompilerMinorVersion 0
*/
/*
* Optimized Sun Compiler Build.
*
#define DefaultCDebugFlags -xO4 -xtarget=pentium_pro
#define OptimizedCDebugFlags -xO4 -xtarget=pentium_pro
*/
/*
* Debuggable Sun Compiler Build.
* Note: This builds _EVERYTHING_ as debuggable
*
#define DefaultCDebugFlags -g -xs
#define OptimizedCDebugFlags -g -xs
*/
/*
* For Linux, this should match the Binutils version you have. This example
* is for 2.6.0.7. See linux.cf for the default setting.
*
* This should automatically get set correctly by imake.
*
#define LinuxBinUtilsMajorVersion 26
*/
/*
* For Linux, these should match the libc version you have. This example
* is for libc.5.4.x. See linux.cf for the default setting.
*
* This should automatically get set correctly by imake.
*
#define LinuxCLibMajorVersion 5
#define LinuxClibMinorVersion 4
*/
/*
* If you want to use the GNU malloc library, uncomment this
*
#define UseGnuMalloc YES
*/
/*
* Set this to whatever is required to access the GNU malloc library.
* The default is '-lgmalloc' unless is specified in the OS's .cf file.
*
#define GnuMallocLibrary -L/usr/local/lib -lgmalloc
*/
/*
* To enable the internal Xserver malloc, uncomment this
*
#define UseInternalMalloc YES
*/
/*
* Some Linux releases don't have a libtermcap. In this case you may need
* to uncomment the following
*
#define TermcapLibrary -lncurses
*/
/*
* Build a server that dynamically loads the modules by setting
* this to YES. This defaults to YES on most platforms. A static server
* can be built by setting this to NO.
*
#define DoLoadableServer NO
*/
/*
* Build dlopen() style modules instead of the standard loader modules.
* Don't enable this unless you have specific development reasons for
* doing so and understand how to deal with the problems you'll run in to.
*
* Enabling this for regular use is NOT supported, and will almost
* certainly cause you problems.
*
#define MakeDllModules YES
*/
/*
* Build XAA. This can be disabled with:
*
#define XF86XAA NO
*/
/*
* Build vgahw. This can be disabled with:
*
#define XF86VgaHw NO
*/
/*
* Build xf1bpp. This can be disabled with:
*
#define XF1Bpp NO
*/
/*
* Build xf4bpp. This can be disabled with:
*
#define XF4Bpp NO
*/
/*
* BSD Console driver support (for FreeBSD and NetBSD).
*
* By default, support is included for pccons and pcvt for NetBSD, and
* pccons, syscons and pcvt for FreeBSD.
*
* To change the list of supported drivers, set the following parameter.
* Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT.
* The following example includes support for syscons and pcvt only.
*
#define XFree86ConsoleDefines -DSYSCONS_SUPPORT -DPCVT_SUPPORT
*/
/*
* To link the X server with a dynamic version of the Xfont library,
* uncomment this.
*
#define XserverStaticFontLib NO
*/
/*
* To enable binary compatibility with previous versions of the font
* encoding support, uncomment this.
*
#define FontencCompatibility YES
*/
/*
* To disable building XInput support, uncomment this
*
#define BuildXInputExt NO
*/
/*
* Uncomment this for joystick support.
*
* Note: Joystick support is broken, so don't enable this.
*
#define JoystickSupport YES
*/
/*
* To disable the ScreenSaver Extension, uncomment this line.
*
#define BuildScreenSaverExt NO
*/
/*
* If you don't want to build Xinerama support, uncomment this.
*
#define BuildXinerama NO
*/
/*
* If you don't want to build support for the GLX extension, uncomment this.
*
#define BuildGlxExt NO
*/
/*
* If you want to build the xf86rush extension, uncomment this line.
* This isn't recommended.
*
#define BuildXF86RushExt YES
*/
/*
* If you want to build the client library for the xf86rush extension,
* uncomment this line. This isn't recommended.
*
#define BuildXF86RushLibrary NO
*/
/*
* If you are running NetBSD 0.9C or later, and have the aperture driver
* installed, uncomment this.
*
#define HasNetBSDApertureDriver YES
*/
/*
* If you are running SVR3 and have the mmap driver installed (for linear
* framebuffer access) uncomment this.
*
#define HasSVR3mmapDrv YES
*/
/*
* If you are using an SVR3 (like ISC 4.x) which supports long file names,
* you can * uncomment this to have manual pages installed under their
* full names
*
#define ExpandManNames YES
*/
/*
* For a POSIXized build on Interactive uncomment this
* Could be used with gcc 'till Version 2.6.3
* Should be used with gcc 2.7.2.
*
#define UsePosix YES
*/
/*
* If you want XDMAUTH support (if you have Wraphelp.c), uncomment this.
*
#define HasXdmAuth YES
*/
/*
* If you have Linux DECnet support, and want to build XFree86 with support
* for connections over DECnet, uncomment this.
*
#define HasDECnet YES
*/
/*
* To build static and shared libraries with debugging information, uncomment
* this. Assumes you have Gcc2.
* (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables
* to build debugging versions of the libraries separately.)
*
#define DebuggableLibraries YES
*/
/*
* To forceably build static libraries in addition to shared libraries,
* uncomment this.
*
#define ForceNormalLib YES
*/
/*
* Uncomment this if your default tools (eg, gcc, ld, as, etc) are
* not the Linux ELF versions.
*
#define LinuxElfDefault NO
*/
/*
* To use ELF format shared libraries for supported OSs, uncomment this.
*
* For Linux the default setting of this is the same as the setting of
* LinuxElfDefault.
*
* For FreeBSD this should automatically be set correctly by imake. Only
* change it here if you need to override the automatic setting.
*
#define UseElfFormat YES
*/
/*
* For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install
* a.out compatibility libraries. To enable that, uncomment this.
*
#define BuildAoutLibraries YES
*/
/*
* If you have trouble with make bombing out in Xlib, try uncommenting this.
* You will not get dependencies as a result, but better than nothing.
*
#define MakeHashTableBug YES
*/
/*
* If you do not want your man pages compress under SVR3 systems that
* support it, uncomment this.
*
#define CompressManPages NO
*/
/*
* If you have sgmlfmt (the XFree86 doctools package) and want to build
* formatted docs from the SGML source, uncomment this.
*
#define HasSgmlFmt YES
*/
/*
* To disable building some document formats, uncomment some of these.
*
#define BuildLinuxDocText NO
#define BuildLinuxDocHtml NO
#define BuildLinuxDocPS NO
*/
/*
* To install Japanese versions of the documentation uncomment this.
* Note: The Japanese documentation consists of a subset of the
* XFree86 3.1 docs.
*
#define InstallJapaneseDocs YES
*/
/*
* To build/install X specs docs, uncomment the following.
* The SpecsDocDirs setting here is recommended because it covers
* the docs that XFree86 has changed or added.
*
#define BuildSpecsDocs YES
#define SpecsDocDirs CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n xterm
*/
/*
* To build all specs docs, not just those listed in SpecsDocDirs, uncomment
* the following.
*
#define BuildAllSpecsDocs YES
*/
/*
* If your system doesn't support vm86() mode and you have
* libx86emu set library path here
*
#define X86EMU_LIBPATH /usr/local/lib
*/
- Previous message: [xorg-commit-diffs] xc BUILD, NONE, 1.1.4.1 ChangeLog, NONE,
1.1.4.1 README, NONE, 1.1.4.1 CHANGELOG-CURRENT, 1.1.2.8,
NONE CHANGELOG-RELEASE-1, 1.1.2.36, NONE INSTALL.TXT, 1.1,
NONE RELNOTES.TXT, 1.1, NONE RELNOTES.XORG, 1.1.2.5,
NONE bug-report, 1.1.4.1, NONE
- Next message: [xorg-commit-diffs] xc/doc/misc INSTALL.ms, 1.1.4.1.6.1,
NONE RELNOTES.ms, 1.1.4.1.6.1, NONE
- Messages sorted by:
[ date ]
[ thread ]
[ subject ]
[ author ]
More information about the xorg-commit-diffs
mailing list