Mon Mar 29 07:46:32 PST 2004

Committed by: ago

--- NEW FILE: xorg.cf ---
XCOMM $XdotOrg$
/*
 * This configuration file contains all of the configuration
 * information for the Xorg based X Servers.
 *
 * Most of these settings can be overridden in a vendor.cf or the
 * BeforeVendor part of the site.def file.
 */
XCOMM $Xorg: xfree86.cf,v 1.4 2000/08/17 19:41:49 cpqbld Exp $

/* Get and set version information. */

#include "date.def"

#define XORG_VERSION_MAJOR  6
#define XORG_VERSION_MINOR  7
#define XORG_VERSION_PATCH  0
#define XORG_VERSION_SNAP   0

[...1988 lines suppressed...]
  || defined (AlphaArchitecture) \
  || defined (ia64Architecture) \
  || defined (PpcArchitecture) \
  || defined (SparcArchitecture) \
  || defined (s390xArchitecture) 
#  define StaticNeedsPicForShared YES
# else
#  define StaticNeedsPicForShared NO
# endif
#endif

#ifndef XF8_32Wid
# define XF8_32Wid		NO
#endif

#if CrossCompiling
#include <cross.def>
#endif
#include <xf86.rules>


--- NEW FILE: xorg.tmpl ---
XCOMM $Xorg: xf86.tmpl,v 1.3 2000/08/17 19:41:48 cpqbld Exp $
XCOMM $XdotOrg: xc/config/cf/xorg.tmpl,v 1.1.2.3 2004/03/24 15:58:45 eich Exp $

#ifndef ConfigDefines
# define ConfigDefines -D__XCONFIGFILE__='"$(XCONFIGFILE)"' \
	-D__XCONFIGDIR__='"$(XCONFIGDIR)"' -D__XLOGFILE__='"$(XLOGFILE)"' \
	-D__XSERVERNAME__='"$(XSERVERNAME)"'
#endif

CONFIG_DEFINES = ConfigDefines

#ifndef ServerDefines
#define ServerDefines StandardDefines VersionDefines
#endif

#ifdef BuilderEMailAddr
BUILDERADDR = BuilderEMailAddr
#else 
BUILDERADDR = "xorg at freedesktop.org"
#endif
#ifdef VendorSupportAddress
 VENDORSUPPORT = VendorSupportAddress
 BUGMSG = -DBUILDERADDR='$(BUILDERADDR)' -DVENDORSUPPORT='$(VENDORSUPPORT)'
#else
 BUGMSG = -DBUILDERADDR='$(BUILDERADDR)'
#endif

#if defined(XF86DriverSDK)
    BUILDMODULEDIR = $(DRIVERSDKMODULEDIR)
    BUILDMODULETOP = ..
    TOP_INCLUDES = TopIncludes
   IMAKE_DEFINES = -DXF86DriverSDK=1
#ifdef UseInstalled
       IMAKE_CMD = $(IMAKE) -DUseInstalled -I$(TOP) -I$(IRULESRC) \
		   $(IMAKE_DEFINES) $(IMAKE_WARNINGS)
#else
       IMAKE_CMD = $(IMAKE) -I$(TOP) -I$(IRULESRC) \
		   $(IMAKE_DEFINES) $(IMAKE_WARNINGS)
#endif

#undef ImakeSubCmdHelper
#ifdef UseInstalled
#define ImakeSubCmdHelper $(IMAKE) -DUseInstalled -I$(IMAKETOP) \
			  -I$(IRULESRC) $(IMAKE_DEFINES) $(IMAKE_WARNINGS)
#else
#define ImakeSubCmdHelper $(IMAKEPREFIX)$(IMAKE) -I$(IMAKETOP) \
			  $(IMAKE_DEFINES) $(IMAKE_WARNINGS) \
			  -I$(IMAKEPREFIX)$(IRULESRC)
#endif
#endif

#ifndef JoystickSupport
#define JoystickSupport		NO
#endif

/*
 * Module support: These overrides must be here, not in xf86.rules,
 * because they will replace rules after having seen the first lines
 * of Imakefile (include <Server.tmpl>)
 */

#ifndef HasGccStackProtector
#define HasGccStackProtector	NO
#endif

#if HasGccStackProtector
MODULE_GCC_FLAGS1 = -fno-stack-protector
#endif 

#ifndef HasGccMergeConstants
#define HasGccMergeConstants	NO
#endif

#if HasGccMergeConstants && DoLoadableServer && !MakeDllModules
MODULE_GCC_FLAGS2 = -fno-merge-constants
#endif

MODULE_GCC_FLAGS = $(MODULE_GCC_FLAGS1) $(MODULE_GCC_FLAGS2)

#if defined(IHaveModules) && MakeDllModules
MODULE_PIC_FLAGS = $(PICFLAGS)
#endif

MODULE_CFLAGS = $(MODULE_PIC_FLAGS) $(MODULE_GCC_FLAGS)

#if defined(IHaveModules)
# if DoLoadableServer
MODULE_DEFINES = -DIN_MODULE -DXFree86Module
# else
MODULE_DEFINES = -DXFree86Module
# endif
#endif

#if defined(IHaveModules) && DoLoadableServer

/* This overrides the ObjCompile in Imake.rules! */
#undef ObjectCompile
#define ObjectCompile(options) RemoveFile($@)                           @@\
	ClearmakeOSName\
	$(MODCC) $(MODCFLAGS) options -c $*.c

/* This overrides an AssembleObject in xf86.rules or in an os-dependent
 * rules file (currently only minix.cf and os2.rules (uncritical))
 */
#define ModCPPOnlyAsm(basename,options) RemoveFile(basename.i)		@@\
	$(MODCPP) AsmDefines $(DEFINES) $(INCLUDES) options basename.S | \	@@\
		grep -v '^\#' > basename.i

#undef AssembleObject
#define AssembleObject(flags) ModCPPOnlyAsm($*,flags)			@@\
	RemoveFile($*.o)						@@\
	$(MODAS) $(MODASFLAGS) -o $*.o $*.i				@@\
	RemoveFile($*.i)

/* This overrides the NormalRelocatableTarget in Imake.rules */
#undef NormalRelocatableTarget
#define	NormalRelocatableTarget(objname,objlist)			@@\
AllTarget(objname.Osuf)							@@\
									@@\
objname.Osuf: objlist $(EXTRALIBRARYDEPS)				@@\
	RemoveFile($@)							@@\
	$(MODLD) $(MODLDCOMBINEFLAGS) objlist -o $@

/* This overrides the NormalDepRelocatableTarget in Imake.rules */
#undef NormalDepRelocatableTarget
#define	NormalDepRelocatableTarget(objname,deplist,objlist)		@@\
AllTarget(objname.Osuf)							@@\
									@@\
objname.Osuf: deplist $(EXTRALIBRARYDEPS)				@@\
	RemoveFile($@)							@@\
	$(MODLD) $(MODLDCOMBINEFLAGS) objlist -o $@

/* This overrides the RanLibrary in Imake.rules */
#if DoRanlibCmd || NeedModuleRanlib
#undef RanLibrary
#define RanLibrary(args) $(MODRANLIB) args
#endif

/* This overrides the MakeLibrary rule in Imake.rules */
#undef MakeLibrary
#define MakeLibrary(libname,objlist) $(MODAR) libname objlist

/* This overrides the LibraryTargetName rule in Imake.rules */
#undef LibraryTargetName
#define LibraryTargetName(libname)Concat(lib,libname.a)

/* This disables an OS/2 rule */
#undef BuildLibSupportLibs
#define BuildLibSupportLibs(dummy)

#endif /* IHaveModules */

--- NEW FILE: xorgsite.def ---
XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.186 2003/06/25 18:06:22 eich Exp $
/******************************************************************************/
/*
 * This file is to provide a quick method for most people to change the
 * behaviour of their XFree86 installation without having to fully
 * understand the workings of site.def and all the various '.cf' files.
 *
 * In the vast majority of cases, it should not be necessary to use this
 * file at all or change it in any way.
 *
 * This file is divided into two sections.  The first contains settings
 * that end-users might reasonably change.  The second contains settings
 * that developers might want to change.
 *
 * IMPORTANT NOTE:  In all cases changing the defaults may cause problems
 * and/or unexpected side-effects.  If you don't understand what a setting
 * does, then it's best to not change it.  If you make changes and have
 * problems, verify that those problems are also present when using an
 * empty host.def file and unchanged version of this file before reporting
 * them.
 *
 * A good way to use this file is to copy it to host.def, and make the
 * changes there.  That way, future patches to this file won't fail.
 * The host.def file will never be patched.
 *
 * The distributed version of this file MUST contain no uncommented
 * definitions.  Default definitions belong in xfree86.cf, or <vendor>.cf
 * files.
 */
/******************************************************************************/

/*
 * If you have build-specific modifications in your host.def file, but
 * want an empty host.def file installed when doing 'make install',
 * uncomment the following
 *
#define InstallEmptyHostDef
 */

/*
 * Which servers to build.  There is only Xorg server.
 * It can be disabled by the following.
 *
#define XorgServer		NO
 */

/*
 * To disable building the Xnest server, uncomment this.
 *
#define XnestServer		NO
 */

/*
 * To disable building Xvfb, uncomment this.
 *
#define XVirtualFramebufferServer	NO
 */

/*
 * To disable building Xprt, uncomment this.
 *
#define XprtServer NO
 */

/*
 * Set the default server (ie the one that gets the sym-link to "X")
 *
#define ServerToInstall		XFree86
 */

/*
 * If you only run the X server under xdm the X servers don't need to be
 * installed SetUID, and you may comment out the lines below.  If you run
 * the servers by hand (with xinit or startx), then they do need to be
 * installed SetUID on most platforms.
 *
 * Consult your system administrator before making the X server setuid.
 *
#define InstallXserverSetUID	NO
 */


/*
 * Server configuration parameters.  The defaults are shown here:
 */

/*
 * Which drivers to build.  When building a static server, each of these
 * will be included in it.  When building the loadable server each of these
 * modules will be built.
 *
#define XF86CardDrivers		mga glint nv tga s3virge sis rendition \
				neomagic i740 tdfx savage \
				cirrus vmware tseng trident chips apm \
				GlideDriver fbdev i128 \
				ati AgpGartDrivers DevelDrivers ark cyrix \
				siliconmotion \
				vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
 */

/*
 * To add third party drivers to the standard driver list, set the
 * following.
 *
#define XF86ExtraCardDrivers	extradriver1 extradriver2 ...
 */

/*
 * Select the XInput devices you want by uncommenting this.
 *
#define XInputDrivers		mouse keyboard acecad calcomp citron \
				digitaledge dmc dynapro elographics \
				microtouch mutouch penmount spaceorb summa \
				wacom void magictouch aiptek
 */

/*
 * There are three parameters that determine where and how the Matrox HAL
 * library is used:
 *
 *   HaveMatroxHal  -- You have the HALlib.a binary library installed
 *                     in xfree86/drivers/mga/HALlib, and you want it to
 *                     be used.
 *                     Default: NO
 *
 *   BuildMatroxHal -- You have the source for the HALlib library (installed
 *                     in xfree86/drivers/mga/hallib), and want to build and
 *                     use it.
 *                     Default: NO
 *
 *   UseMatroxHal   -- You want to build support for loading/using the HAL
 *                     library into the mga driver.  For module server builds
 *                     you don't need to have the HALlib library to do this.
 *                     but you want to build support for loading it and using
 *                     it into the mga driver module.
 *                     Default: YES for loadable server build
 *                              (HaveMatroxHal || BuildMatroxHal) for static
 */

/*
 * To disable use of the Matrox HAL library, uncomment this:
 *
#define UseMatroxHal		NO
 */

/*
 * If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib,
 * uncomment this:
 *
#define HaveMatroxHal		YES
 */

/*
 * If you have the HALlib source code installed in xfree86/drivers/mga/hallib,
 * uncomment this:
#define BuildMatroxHal		YES
 */

/*
 * To disable building the font server, uncomment this.
 *
#define BuildFontServer		NO
 */

/*
 * To disable support for Speedo fonts, uncomment this.
 *
#define BuildSpeedo		NO
 */

/*
 * To disable support for Type1 fonts, uncomment this.
 *
#define BuildType1		NO
 */

/*
 * To disable support for CID fonts, uncomment this.
 *
#define BuildCID		NO
 */

/*
 * To disable support for TrueType fonts, uncomment these.
 *
#define BuildFreeType		NO
#define BuildXTrueType		NO
 */

/*
 * To set non-default build options for the underlying FreeType libraries,
 * add them here and uncomment.
 *
#define Freetype2BuildDefines	-DFREETYPE_BUILD_DEFINES
 */

/*
 * If you want to use FreeType 1.x build options that differ from the FreeType2
 * build options, set them here and uncomment.  Otherwise the Freetype2 build
 * options will be used for both FreeType 2.x and 1.x.  Note: FreeType 1.x
 * is currently only used for the X-TrueType (xtt) module.
 *
#define Freetype1BuildDefines	-DFREETYPE1_BUILD_DEFINES
 */

/*
 * To build the FreeType libraries with the TrueType byte code interpreter
 * enabled, uncomment this.  Note that there are patent issues related to the
 * TrueType byte code interpreter, and we only recommend you enabling this
 * if you are sure that there are no legal impediments to you doing so.  See
 * <http://www.freetype.org/patents.html> for further information.
 *
#define Freetype2BuildDefines -DTT_CONFIG_OPTION_BYTECODE_INTERPRETER
 */

/*
 * Do you want to Build Fonts (Usually you only want to build and install
 * fonts once, if this is a first time install you will want to build the
 * fonts)
 *
#define BuildFonts		NO
 */

/*
 * To not build/install the 75dpi fonts, uncomment the following
 *
#define Build75DpiFonts		NO
 */

/*
 * To not build/install the 100dpi fonts, uncomment the following
 *
#define Build100DpiFonts	NO
 */

/*
 * To not build/install the Speedo fonts, uncomment the following
 *
#define BuildSpeedoFonts	NO
 */

/*
 * To not build/install the Type1 fonts, uncomment the following
 *
#define BuildType1Fonts		NO
 */

/*
 * To not build/install the CID fonts, uncomment the following
 *
#define BuildCIDFonts		NO
 */

/*
 * To not build/install the True Type fonts, uncomment the following
 *
#define BuildTrueTypeFonts	NO
 */

/*
 * To not build/install the Cyrillic fonts, uncomment the following
 *
#define BuildCyrillicFonts	NO
 */

/*
 * To not install the local font directory, uncomment the following
 *
#define MakeLocalFontDir	NO
 */

/*
 * To build only the servers with a cut-down source tree, uncomment
 * this.
 *
#define BuildServersOnly	YES
 */

/*
 * By default, the sample config files for xinit, xdm and xfs are installed
 * only when there is no pre-existing version installed.  Uncommenting the
 * following lines will force the sample versions to be installed even if
 * it means over-writing existing versions.
 *
#define InstallXinitConfig	YES
#define InstallXdmConfig	YES
#define InstallFSConfig		YES
 */

/*
 * By default the application defaults files are always installed.
 * Uncommenting the the following will prevent exising application
 * defaults files from being over-written.
 *
#define InstallAppDefFiles	NO
 */

/*
 * Undefine the following if you don't want to have config files and
 * app-defaults installed in a separate directory (i.e. /etc/X11).
 *
#define UseSeparateConfDir NO
 */

/* 
 * To enable building the glide driver, you need to define 
 * HasGlide2 to YES and set the Glide2IncDir variable. 
 * HasGlide2 is per default NO.
 *
#define HasGlide2 YES
 */

/*
 * Set the path to your Glide include files.
 *
#define Glide2IncDir /usr/include/glide
 */

/* 
 * Have glide 3?
 *
#define HasGlide3 YES
 */

/*
 * Set the path to your Glide 3 include files.
 *
#define Glide3IncDir /usr/include/glide3
 */



/*
 * Unless you're a developer you shouldn't need to change anything
 * beyond this point.
 */

/*
 * If you want to enable some developer settings, like more verbose
 * compiler warnings, uncomment this.
 *
#define XFree86Devel	YES
*/

/*
 * The default optimisation flags for GCC 2.x.  -fno-strength-reduce is
 * here to work around a bug in -O2 for GCC 2.x on i386 platforms.
 * If you are using a version that doesn't have this bug, you can
 * uncomment the following line, and remove '-fno-strength-reduce'
 * If you are building binaries for a 486, it may be beneficial to add
 * -m486
 *
#define DefaultGcc2i386Opt	-O2 -fno-strength-reduce
 */

/*
 * This allows the GCC warning flags to be set.  The default is shown here.
 *
#define GccWarningOptions -Wall -Wpointer-arith -Wstrict-prototypes \
                          -Wmissing-prototypes -Wmissing-declarations \
                          -Wredundant-decls -Wnested-externs
 */

/* 
 * Sun Compiler stuff.. 
 *
#define HasSunC                         YES
#define HasSunCplusplus                 YES
#define CplusplusCompilerMajorVersion   5
#define CplusplusCompilerMinorVersion   0
#define CCompilerMajorVersion           5
#define CCompilerMinorVersion           0
 */

/*
 * Optimized Sun Compiler Build.
 *
#define DefaultCDebugFlags              -xO4 -xtarget=pentium_pro
#define OptimizedCDebugFlags            -xO4 -xtarget=pentium_pro
 */

/* 
 * Debuggable Sun Compiler Build. 
 * Note: This builds _EVERYTHING_ as debuggable
 *
#define DefaultCDebugFlags              -g -xs
#define OptimizedCDebugFlags            -g -xs
 */

/*
 * For Linux, this should match the Binutils version you have.  This example
 * is for 2.6.0.7.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxBinUtilsMajorVersion	26
 */

/*
 * For Linux, these should match the libc version you have.  This example
 * is for libc.5.4.x.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxCLibMajorVersion	5
#define LinuxClibMinorVersion	4
 */

/*
 * If you want to use the GNU malloc library, uncomment this
 *
#define UseGnuMalloc		YES
 */

/*
 * Set this to whatever is required to access the GNU malloc library.
 * The default is '-lgmalloc' unless is specified in the OS's .cf file.
 *
#define GnuMallocLibrary	-L/usr/local/lib -lgmalloc
 */

/*
 * To enable the internal Xserver malloc, uncomment this
 *
#define UseInternalMalloc	YES
 */

/*
 * Some Linux releases don't have a libtermcap.  In this case you may need
 * to uncomment the following
 *
#define TermcapLibrary		-lncurses
 */

/*
 * Build a server that dynamically loads the modules by setting
 * this to YES.  This defaults to YES on most platforms.  A static server
 * can be built by setting this to NO.
 *
#define DoLoadableServer	NO
 */

/*
 * Build dlopen() style modules instead of the standard loader modules.
 * Don't enable this unless you have specific development reasons for
 * doing so and understand how to deal with the problems you'll run in to.
 *
 * Enabling this for regular use is NOT supported, and will almost
 * certainly cause you problems.
 *
#define MakeDllModules		YES
 */

/*
 * Build XAA.  This can be disabled with:
 *
#define XF86XAA			NO
 */

/*
 * Build vgahw.  This can be disabled with:
 *
#define XF86VgaHw		NO
 */

/*
 * Build xf1bpp.  This can be disabled with:
 *
#define XF1Bpp			NO
 */

/*
 * Build xf4bpp.  This can be disabled with:
 *
#define XF4Bpp			NO
 */


/*
 * BSD Console driver support (for FreeBSD and NetBSD).
 *
 * By default, support is included for pccons and pcvt for NetBSD, and
 * pccons, syscons and pcvt for FreeBSD.
 *
 * To change the list of supported drivers, set the following parameter.
 * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT.
 * The following example includes support for syscons and pcvt only.
 *
#define XFree86ConsoleDefines	-DSYSCONS_SUPPORT -DPCVT_SUPPORT
 */

/*
 * To link the X server with a dynamic version of the Xfont library,
 * uncomment this.
 *
#define XserverStaticFontLib	NO
 */

/*
 * To enable binary compatibility with previous versions of the font
 * encoding support, uncomment this.
 *
#define FontencCompatibility    YES
 */

/*
 * To disable building XInput support, uncomment this
 *
#define BuildXInputExt		NO
 */

/*
 * Uncomment this for joystick support.
 *
 * Note: Joystick support is broken, so don't enable this.
 *
#define JoystickSupport YES
 */

/*
 * To disable the ScreenSaver Extension, uncomment this line.
 *
#define BuildScreenSaverExt	NO
 */

/* 
 * If you don't want to build Xinerama support, uncomment this.
 *
#define BuildXinerama		NO
 */

/*
 * If you don't want to build support for the GLX extension, uncomment this.
 *
#define BuildGlxExt             NO
 */

/*
 * If you want to build the xf86rush extension, uncomment this line.
 * This isn't recommended.
 *
#define BuildXF86RushExt	YES
 */

/*
 * If you want to build the client library for the xf86rush extension,
 * uncomment this line.  This isn't recommended.
 *
#define BuildXF86RushLibrary	NO
 */

/*
 * If you are running NetBSD 0.9C or later, and have the aperture driver
 * installed, uncomment this.
 *
#define HasNetBSDApertureDriver	YES
 */

/*
 * If you are running SVR3 and have the mmap driver installed (for linear
 * framebuffer access) uncomment this.
 *
#define HasSVR3mmapDrv	YES
 */

/*
 * If you are using an SVR3 (like ISC 4.x) which supports long file names,
 * you can * uncomment this to have manual pages installed under their
 * full names
 *
#define ExpandManNames		YES
 */

/*
 * For a POSIXized build on Interactive uncomment this
 * Could be used with gcc 'till Version 2.6.3
 * Should be used with gcc 2.7.2. 
 *
#define UsePosix		YES
 */

/*
 * If you want XDMAUTH support (if you have Wraphelp.c), uncomment this.
 *
#define HasXdmAuth		YES
 */

/*
 * If you have Linux DECnet support, and want to build XFree86 with support
 * for connections over DECnet, uncomment this.
 *
#define HasDECnet		YES
 */

/*
 * To build static and shared libraries with debugging information, uncomment
 * this. Assumes you have Gcc2.
 * (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables
 * to build debugging versions of the libraries separately.)
 *
#define DebuggableLibraries	YES
*/

/*
 * To forceably build static libraries in addition to shared libraries,
 * uncomment this.
 *
#define ForceNormalLib		YES
 */

/*
 * Uncomment this if your default tools (eg, gcc, ld, as, etc) are
 * not the Linux ELF versions.
 *
#define LinuxElfDefault		NO
 */

/*
 * To use ELF format shared libraries for supported OSs, uncomment this.
 *
 * For Linux the default setting of this is the same as the setting of
 * LinuxElfDefault.
 *
 * For FreeBSD this should automatically be set correctly by imake.  Only
 * change it here if you need to override the automatic setting.
 *
#define UseElfFormat		YES
 */

/*
 * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install
 * a.out compatibility libraries.  To enable that, uncomment this.
 *
#define BuildAoutLibraries	YES
 */

/*
 * If you have trouble with make bombing out in Xlib, try uncommenting this.
 * You will not get dependencies as a result, but better than nothing.
 *
#define MakeHashTableBug        YES
 */

/*
 * If you do not want your man pages compress under SVR3 systems that
 * support it, uncomment this.
 *
#define CompressManPages        NO
 */

/*
 * If you have sgmlfmt (the XFree86 doctools package) and want to build
 * formatted docs from the SGML source, uncomment this.
 *
#define HasSgmlFmt		YES
 */

/*
 * To disable building some document formats, uncomment some of these.
 *
#define BuildLinuxDocText	NO
#define BuildLinuxDocHtml	NO
#define BuildLinuxDocPS		NO
 */

/*
 * To install Japanese versions of the documentation uncomment this.
 * Note: The Japanese documentation consists of a subset of the
 * XFree86 3.1 docs.
 *
#define InstallJapaneseDocs	YES
 */

/*
 * To build/install X specs docs, uncomment the following.
 * The SpecsDocDirs setting here is recommended because it covers
 * the docs that XFree86 has changed or added.
 *
#define BuildSpecsDocs		YES
#define SpecsDocDirs		CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n xterm
 */

/*
 * To build all specs docs, not just those listed in SpecsDocDirs, uncomment
 * the following.
 *
#define BuildAllSpecsDocs	YES
 */

/*
 * If your system doesn't support vm86() mode and you have
 * libx86emu set library path here
 *
#define X86EMU_LIBPATH /usr/local/lib
 */ 



Index: Amoeba.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/Amoeba.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/Amoeba.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/Amoeba.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -186,7 +186,7 @@
 TOOLSET         = ack
 ALDFLAGS        = /* -mam_i80386 now in CCopts */ -.c -Rcv-s32
 
-#include <xfree86.cf>
+#include <xorg.cf>
 #endif
 
 #if defined(Sun3Architecture)

Index: DGUX.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/DGUX.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/DGUX.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/DGUX.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -180,7 +180,7 @@
 #endif
 
 #ifdef i386Architecture
-#include <xfree86.cf>
+#include <xorg.cf>
 #endif
 
 #include <sv4Lib.rules>

Index: FreeBSD.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/FreeBSD.cf,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/FreeBSD.cf	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/FreeBSD.cf	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -564,4 +564,4 @@
 
 #include <bsdLib.rules>
 
-#include <xfree86.cf>
+#include <xorg.cf>

Index: Imake.rules
===================================================================
RCS file: /cvs/xorg/xc/config/cf/Imake.rules,v
retrieving revision 1.1.4.3.2.2
retrieving revision 1.1.4.3.2.3
diff -u -d -r1.1.4.3.2.2 -r1.1.4.3.2.3
--- a/Imake.rules	17 Mar 2004 20:25:00 -0000	1.1.4.3.2.2
+++ b/Imake.rules	29 Mar 2004 15:45:28 -0000	1.1.4.3.2.3
@@ -557,6 +557,13 @@
 	MakeDir(dir)
 #endif /* InstallDirectory */
 
+#ifndef InstallCreateLink
+# define InstallCreateLink(dest,from,to)				@@\
+install:: $(DESTDIR)dest/from						@@\
+	  cd $(DESTDIR)dest && \					@@\
+	  $(LN) -sf from to
+#endif
+
 #ifndef BuildIncludesTop
 #define BuildIncludesTop(srclist)					@@\
 includes:: srclist							@@\

Index: Imake.tmpl
===================================================================
RCS file: /cvs/xorg/xc/config/cf/Imake.tmpl,v
retrieving revision 1.1.4.3.2.3
retrieving revision 1.1.4.3.2.4
diff -u -d -r1.1.4.3.2.3 -r1.1.4.3.2.4
--- a/Imake.tmpl	17 Mar 2004 20:25:00 -0000	1.1.4.3.2.3
+++ b/Imake.tmpl	29 Mar 2004 15:45:28 -0000	1.1.4.3.2.4
@@ -894,6 +894,9 @@
 #ifndef AppLoadDefs
 #define AppLoadDefs -D__apploaddir__=$(XAPPLOADDIR)
 #endif
+#ifndef AppManDefs
+#define AppManDefs -D__appmansuffix__=$(MANSUFFIX)
+#endif
 #ifndef LibManDefs
 #define LibManDefs -D__libmansuffix__=$(LIBMANSUFFIX)
 #endif
@@ -912,6 +915,18 @@
 #ifndef ProjectManDefs
 #define ProjectManDefs -D__projectroot__=$(PROJECTROOT)
 #endif
+#ifndef XConfigFileManDefs
+#define XConfigFileManDefs -D__xconfigfile__=$(XCONFIGFILE)
+#endif
+#ifndef XConfigDirManDefs
+#define XConfigDirManDefs -D__xconfigdir__=$(XCONFIGDIR)
+#endif
+#ifndef XLogFileManDefs
+#define XLogFileManDefs -D__xlogfile__=$(XLOGFILE)
+#endif
+#ifndef XServerManDefs
+#define XServerManDefs -D__xservername__=$(XSERVERNAME)
+#endif
 
 #ifndef CompressManCmd
 #define CompressManCmd gzip -n
@@ -1818,7 +1833,7 @@
    ADMINMANSUFFIX = AdminManSuffix	/* suffix for admin command man pages */
      MANSRCSUFFIX = ManSrcSuffix	/* suffix for man page source */
      MANNEWSUFFIX = ManNewSuffix	/* suffix for preprocessed man source */
-          MANDEFS = AppLoadDefs FileManDefs LibManDefs MiscManDefs DriverManDefs AdminManDefs ProjectManDefs $(XORGMANDEFS) $(VENDORMANDEFS)
+          MANDEFS = AppLoadDefs AppManDefs FileManDefs LibManDefs MiscManDefs DriverManDefs AdminManDefs ProjectManDefs XConfigFileManDefs XConfigDirManDefs XLogFileManDefs XServerManDefs $(XORGMANDEFS) $(VENDORMANDEFS)
 
    COMPRESSMANCMD = CompressManCmd
 
@@ -2000,7 +2015,7 @@
  * LOCAL_LDFLAGS contains client-specific ld flags flags set in Imakefile
  */
       ALLINCLUDES = $(INCLUDES) $(EXTRA_INCLUDES) $(TOP_INCLUDES) $(INSTALLED_INCLUDES) $(STD_INCLUDES)
-       ALLDEFINES = $(ALLINCLUDES) $(STD_DEFINES) $(PROTO_DEFINES) $(THREADS_DEFINES) $(MODULE_DEFINES) $(DEFINES) $(EXTRA_DEFINES)
+       ALLDEFINES = $(ALLINCLUDES) $(STD_DEFINES) $(PROTO_DEFINES) $(THREADS_DEFINES) $(MODULE_DEFINES) $(DEFINES) $(EXTRA_DEFINES) $(VENDOR_DEFINES)
            CFLAGS = $(CDEBUGFLAGS) $(CCOPTIONS) $(THREADS_CFLAGS) $(MODULE_CFLAGS) $(ALLDEFINES)
         LINTFLAGS = $(LINTOPTS) -DLINT $(ALLDEFINES) $(DEPEND_DEFINES)
          LDPRELIB = LdPreLib $(INSTALLED_LIBS)
@@ -2111,6 +2126,7 @@
        LDPOSTLIBS = LdPostLibs
      TOP_INCLUDES = TopIncludes
   PROJECT_DEFINES = ProjectDefines
+   VENDOR_DEFINES = VendorDefines
 #if HasCplusplus
 CXXPROJECT_DEFINES = CplusplusProjectDefines
 #endif

Index: Imakefile
===================================================================
RCS file: /cvs/xorg/xc/config/cf/Imakefile,v
retrieving revision 1.1.4.1.2.3
retrieving revision 1.1.4.1.2.4
diff -u -d -r1.1.4.1.2.3 -r1.1.4.1.2.4
--- a/Imakefile	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.3
+++ b/Imakefile	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.4
@@ -24,6 +24,9 @@
 DEFFILES = \
 $(XFREE86DEFFILES) \
 xf86site.def \
+xorgsite.def \
+date.def \
+version.def \
 $(HOSTDEFFILES) \
 site.def
 
@@ -82,7 +85,8 @@
 sunLib.tmpl \
 sv3Lib.tmpl \
 sv4Lib.tmpl \
-xf86.tmpl
+xf86.tmpl \
+xorg.tmpl
 
 CFFILES = \
 Imake.cf \
@@ -132,7 +136,8 @@
 x386.cf \
 QNX4.cf \
 darwin.cf \
-xfree86.cf
+xfree86.cf \
+xorg.cf
 
 INSTFILES = $(RULEFILES) $(TMPLFILES) $(DEFFILES) $(CFFILES) $(LOCALFILES)
 
@@ -153,7 +158,7 @@
 		$(DESTDIR)$(CONFIGDIR)/host.def; \
 	RemoveFile($${TMP}))
 
-#ifdef XFree86Version
+#if defined(XFree86Version) || defined(XorgVersion)
 install.sdk::
 	@(TMP=/tmp/tmp.$$$$; \
 	RemoveFile($${TMP}); \

Index: NetBSD.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/NetBSD.cf,v
retrieving revision 1.1.4.3.2.1
retrieving revision 1.1.4.3.2.2
diff -u -d -r1.1.4.3.2.1 -r1.1.4.3.2.2
--- a/NetBSD.cf	17 Mar 2004 20:25:00 -0000	1.1.4.3.2.1
+++ b/NetBSD.cf	29 Mar 2004 15:45:28 -0000	1.1.4.3.2.2
@@ -586,7 +586,7 @@
 #endif
 
 #if defined(i386Architecture) || defined(Arm32Architecture) || defined(AlphaArchitecture) || defined(PpcArchitecture)
-# include <xfree86.cf>
+# include <xorg.cf>
 #endif
 
 /*
@@ -618,7 +618,7 @@
 #define BuildXF86VidModeExt	NO
 #define BuildXF86DGA		NO
 #define BuildXInputExt		NO
-#include <xfree86.cf>
+#include <xorg.cf>
 #endif
 
 /*

Index: OpenBSD.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/OpenBSD.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/OpenBSD.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/OpenBSD.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -402,16 +402,16 @@
 #  define SharedLibXThrStub	NO
 # endif
 
-# ifndef XF86Server
+# ifndef XorgServer
 #  if OSMajorVersion == 3 && OSMinorVersion >= 2 || OSMajorVersion > 3
-#    define XF86Server		YES
+#    define XorgServer		YES
 #  else
-#    define XF86Server		NO
+#    define XorgServer		NO
 #  endif
 # endif
 
 /* Definitions for building the XFree86 server */
-# if XF86Server
+# if XorgServer
 #   ifndef HasNetBSDApertureDriver
 #     define HasNetBSDApertureDriver	YES
 #   endif
@@ -427,9 +427,9 @@
 #   endif
 #   define UseMatroxHal		NO	/* Matrox HAL is i386 only */
 
-# endif /* XF86Server */
+# endif /* XorgServer */
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* AlphaArchitecture */
 
@@ -522,7 +522,7 @@
 #  define HasX86Support		UseElfFormat
 # endif
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* i386Architecture */
 
@@ -559,7 +559,7 @@
 
 # define ServerExtraDefines	-DXFree86Server
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* AmigaArchitecture */
 
@@ -580,7 +580,7 @@
 
 # define ServerExtraDefines	-DXFree86Server
 
-#include <xfree86.cf>
+#include <xorg.cf>
 
 #endif /* Hp300Architecture */
 
@@ -596,7 +596,7 @@
 
 # define ServerExtraDefines	-DXFree86Server
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* mac68kArchitecture */
 
@@ -612,7 +612,7 @@
 
 # define ServerExtraDefines	-DXFree86Server
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* Mvme68kArchitecture */
 
@@ -672,7 +672,7 @@
 #    define XFree86ConsoleDefines -DPCCONS_SUPPORT
 #  endif
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* ArcArchitecture */
 
@@ -716,12 +716,12 @@
 #  endif
 # endif
 
-# ifndef XF86Server
-#   define XF86Server		YES
+# ifndef XorgServer
+#   define XorgServer		YES
 # endif
 
 /* Definitions for building the X server */
-# if XF86Server
+# if XorgServer
 #   define ServerOSDefines	XFree86ServerOSDefines \
 				-DDDXTIME -DDDXOSINIT
 #   define ServerExtraDefines	GccGasOption XFree86ServerDefines
@@ -743,9 +743,9 @@
 #     define UsbMouseSupport		YES
 #   endif
 
-# endif /* XF86Server */
+# endif /* XorgServer */
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* PpcArchitecture */
 
@@ -792,7 +792,7 @@
 # define BuildXF86VidModeExt	NO
 # define BuildXF86DGA		NO
 # define BuildXInputExt		NO
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* SparcArchitecture */
 
@@ -806,8 +806,8 @@
 #  define HasWeakSymbols	YES
 # endif
 
-# ifndef XF86Server
-#  define XF86Server		YES
+# ifndef XorgServer
+#  define XorgServer		YES
 # endif
 
 # define ServerExtraDefines	GccGasOption -D_XSERVER64 XFree86ServerDefines
@@ -815,14 +815,14 @@
 				-DDDXTIME -DDDXOSINIT
 # define XkbServerDefines	-DXKB_ALWAYS_USES_SOFT_REPEAT
 
-# if XF86Server
+# if XorgServer
 #   ifndef DoLoadableServer
 #     define DoLoadableServer	NO
 #   endif
 #   define XFree86ConsoleDefines -DWSCONS_SUPPORT
 # endif
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* Sparc64Architecture */
 
@@ -849,7 +849,7 @@
 # define BuildGlxExt		NO
 # define BuildGLXLibrary	NO
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #endif /* VaxArchitecture */
  

Index: QNX4.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/QNX4.cf,v
retrieving revision 1.1.6.1
retrieving revision 1.1.6.2
diff -u -d -r1.1.6.1 -r1.1.6.2
--- a/QNX4.cf	17 Mar 2004 20:25:00 -0000	1.1.6.1
+++ b/QNX4.cf	29 Mar 2004 15:45:28 -0000	1.1.6.2
@@ -90,5 +90,5 @@
 #define ExtraFilesToClean       *.err *.map 
 
 #include <QNX4.rules>
-#include <xfree86.cf>
+#include <xorg.cf>
 

Index: Server.tmpl
===================================================================
RCS file: /cvs/xorg/xc/config/cf/Server.tmpl,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/Server.tmpl	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/Server.tmpl	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -73,3 +73,7 @@
 #ifdef XFree86Version
 #include <xf86.tmpl>
 #endif
+
+#ifdef XorgVersion
+#include <xorg.tmpl>
+#endif

Index: X11.tmpl
===================================================================
RCS file: /cvs/xorg/xc/config/cf/X11.tmpl,v
retrieving revision 1.1.4.2.2.5
retrieving revision 1.1.4.2.2.6
diff -u -d -r1.1.4.2.2.5 -r1.1.4.2.2.6
--- a/X11.tmpl	29 Mar 2004 12:17:57 -0000	1.1.4.2.2.5
+++ b/X11.tmpl	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.6
@@ -42,15 +42,28 @@
 
 /* X.Org release string */
 #ifndef XOrgReleaseString
-#define XOrgReleaseString	Release 6.6
+# if defined XorgVersionString
+#   define XOrgReleaseString	Release XorgVersionString
+# else
+#   define XOrgReleaseString	Release 6.7
+# endif
 #endif
 
 #ifndef XOrgManNameString
 #define XOrgManNameString	X Version 11
 #endif
-
-XORGRELSTRING = XOrgReleaseString
-XORGMANNAME = XOrgManNameString
+#ifndef XOrgNameString
+# define XOrgNameString   The X.Org Foundation
+#endif
+#ifndef XOrgNameStringShort
+# define XOrgNameStringShort   X.Org
+#endif
+#ifndef XOrgStdFilePrefix
+# define XOrgStdFilePrefix     xorg
+#endif
+#ifndef XOrgWebSupportAddress
+# define XOrgWebSupportAddress http://wiki.X.Org
+#endif
 
 #ifndef XOrgManDefs
 #define XOrgManDefs -D__xorgversion__='"$(XORGRELSTRING)" "$(XORGMANNAME)"'
@@ -62,14 +75,32 @@
 #ifndef XVendorManVersionString
 #define XVendorManVersionString XOrgReleaseString
 #endif
-
-VENDORMANNAME = XVendorManNameString
-VENDORMANVERSION = XVendorManVersionString
+#ifndef XVendorNameString
+# define XVendorNameString XOrgNameString
+#endif
+#ifndef XVendorNameStringShort
+# define XVendorNameStringShort XOrgNameStringShort
+#endif
+#ifndef XVendorWebSupport
+# define XVendorWebSupport XOrgWebSupportAddress
+#endif
+#ifndef XVendorStdFilePrefix
+# define XVendorStdFilePrefix XOrgStdFilePrefix
+#endif
 
 #ifndef VendorManDefs
 #define VendorManDefs -D__vendorversion__="$(VENDORMANVERSION) $(VENDORMANNAME)"
 #endif
 
+#ifndef VendorDefines
+#define VendorDefines -DXVENDORNAME='"$(VENDORNAME)"' -DXVENDORNAMESHORT='"$(VENDORNAMESHORT)"'
+#endif
+
+#ifndef VendorSupportDefines
+# if defined XVendorWebSupport
+#  define VendorSupportDefines -D__VENDORDWEBSUPPORT__='"$(VENDORWEBSUPPORT)"'
+# endif
+#endif
 /*
  * X-specific things
  */
@@ -334,7 +365,7 @@
 #define BuildDPMS		YES
 #endif
 #ifndef BuildFontLib
-#if !defined(XF86Server) || !XF86Server
+#if (!defined(XF86Server) || !XF86Server) && (!defined (XorgServer) || !XorgServer)
 #define BuildFontLib		(BuildLibraries || BuildServer)
 #else
 #define BuildFontLib		(BuildLibraries || \
@@ -489,7 +520,7 @@
 #ifndef BuildGlxExt
 #define BuildGlxExt		NO
 #else
-#if     BuildGlxExt && !defined(XFree86Version)
+#if     BuildGlxExt && !defined(XFree86Version) && !defined(XorgVersion)
 #undef  BuildXF86DRI
 #undef  BuildXF86DRM
 #undef  BuildXF86DRIDriverSupport
@@ -934,6 +965,12 @@
 #ifndef XkbServerDefines
 #define XkbServerDefines /**/
 #endif
+#ifndef XkbDefRulesDefines
+#define XkbDefRulesDefines  -D__XKBDEFRULES__='"$(XKBDEFRULES)"'
+#endif
+# ifndef XkbDefaultRulesFile
+# define XkbDefaultRulesFile  XVendorStdFilePrefix
+#endif
 #ifndef LbxDefines
 #if BuildLBX
 #define LbxDefines -DLBX
@@ -1649,9 +1686,25 @@
 #ifdef X11ProjectRoot
      XPROJECTROOT = X11ProjectRoot
 #endif
-
+    VENDORMANNAME = XVendorManNameString
+ VENDORMANVERSION = XVendorManVersionString
       XORGMANDEFS = XOrgManDefs
     VENDORMANDEFS = VendorManDefs
+       VENDORNAME = XVendorNameString
+  VENDORNAMESHORT = XVendorNameStringShort
+
+#if defined (XVendorWebSupport)
+ VENDORWEBSUPPORT = XVendorWebSupport
+#endif
+VENDORSUPPORTDEFS = VendorSupportDefines
+
+      XKBDEFRULES = XkbDefaultRulesFile
+  XKBDEFRULESDEFS = XkbDefRulesDefines
+  
+     XCONFIGFILE = XConfigFile
+      XCONFIGDIR = XConfigDir
+        XLOGFILE = XLogFile
+     XSERVERNAME = XServerName
 
 #if HasSharedLibraries
 #ifndef DontUseLibPathVar

Index: bsdi.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/bsdi.cf,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/bsdi.cf	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/bsdi.cf	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -327,7 +327,7 @@
 #ifdef i386Architecture
 #define i386Bsd 1
 #define i386Bsdi 1
-#include <xfree86.cf>
+#include <xorg.cf>
 #endif
 
 #ifdef SparcArchitecture

Index: darwin.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/darwin.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/darwin.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/darwin.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -303,5 +303,5 @@
 #endif
 
 /* include all the XFree86 rules */
-#include <xfree86.cf>
+#include <xorg.cf>
 

Index: gnu.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/gnu.cf,v
retrieving revision 1.1.6.1
retrieving revision 1.1.6.2
diff -u -d -r1.1.6.1 -r1.1.6.2
--- a/gnu.cf	17 Mar 2004 20:25:00 -0000	1.1.6.1
+++ b/gnu.cf	29 Mar 2004 15:45:28 -0000	1.1.6.2
@@ -181,5 +181,5 @@
 XCOMM XXX Might need this if they are not careful with slashes.
 XCOMM #define DirFailPrefix -
 
-#include <xfree86.cf>
+#include <xorg.cf>
 

Index: linux.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/linux.cf,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/linux.cf	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/linux.cf	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -998,7 +998,7 @@
 #endif
 
 #include <lnxLib.rules>
-# include <xfree86.cf>
+# include <xorg.cf>
 
 #ifndef XFree86ServerOSDefines
 # define XFree86ServerOSDefines

Index: lynx.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/lynx.cf,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/lynx.cf	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/lynx.cf	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -399,4 +399,4 @@
 #include <lynxLib.rules>
 #endif
 
-#include <xfree86.cf>
+#include <xorg.cf>

Index: mach.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/mach.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/mach.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/mach.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -68,5 +68,5 @@
 #endif
 
 #ifdef i386Architecture
-# include <xfree86.cf>
+# include <xorg.cf>
 #endif

Index: minix.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/minix.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/minix.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/minix.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -61,4 +61,4 @@
 	$(RM) $*.i.s
 #endif
 
-#include <xfree86.cf>
+#include <xorg.cf>

Index: nto.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/nto.cf,v
retrieving revision 1.1.6.1
retrieving revision 1.1.6.2
diff -u -d -r1.1.6.1 -r1.1.6.2
--- a/nto.cf	17 Mar 2004 20:25:00 -0000	1.1.6.1
+++ b/nto.cf	29 Mar 2004 15:45:28 -0000	1.1.6.2
@@ -144,5 +144,5 @@
 #define ExtraFilesToClean       *.err *.map 
 
 #include <nto.rules>
-#include <xfree86.cf>
+#include <xorg.cf>
 

Index: os2.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/os2.cf,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/os2.cf	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/os2.cf	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -208,6 +208,6 @@
 #include <os2.rules>
 #include <os2Lib.rules>
 
-# include <xfree86.cf>
+# include <xorg.cf>
 
 	

Index: sco.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/sco.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/sco.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/sco.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -201,6 +201,6 @@
 #endif /* SCO 3.2.4 and SCO 3.2.2 section */
 
 #ifdef i386Architecture
-#include <xfree86.cf>
+#include <xorg.cf>
 #endif
 

Index: sco5.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/sco5.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/sco5.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/sco5.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -267,4 +267,4 @@
 #include <scoLib.rules>  /* minor changes to sv4Lib.rules */
 #include <sv4Lib.rules>
 
-#include <xfree86.cf>
+#include <xorg.cf>

Index: sequent.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/sequent.cf,v
retrieving revision 1.1
retrieving revision 1.1.6.1
diff -u -d -r1.1 -r1.1.6.1
--- a/sequent.cf	14 Nov 2003 15:54:29 -0000	1.1
+++ b/sequent.cf	29 Mar 2004 15:45:28 -0000	1.1.6.1
@@ -169,7 +169,7 @@
 #define BuildXF86MiscExt	NO	/* turn off the server portion */
 #define BuildXF86VidModeExt	NO	/* turn off the server portion */
 #define BuildXInputExt		YES
-#define BuildXKBuilib		YES	/* override NO set in xfree86.cf */
+#define BuildXKBuilib		YES	/* override NO set in xorg.cf */
 #define ConnectionFlags		-DTCPCONN
 #define DefaultSystemPath	/bin:/etc:/usr/bin:$(BINDIR)
 #define DefaultUserPath		:/bin:/usr/bin:$(BINDIR)
@@ -443,6 +443,6 @@
 #endif /* UseHidesymsLists */
 
 #if OSMajorVersion >= 4
-#include <xfree86.cf>
+#include <xorg.cf>
 #include <sequentLib.rules>	/* include after macros, before Motif.rules */
 #endif /* OSMajorVersion >= 4 */

Index: sgi.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/sgi.cf,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/sgi.cf	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/sgi.cf	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -316,4 +316,4 @@
 #define DoLoadableServer YES
 #endif
 
-#include <xfree86.cf>
+#include <xorg.cf>

Index: site.def
===================================================================
RCS file: /cvs/xorg/xc/config/cf/site.def,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/site.def	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/site.def	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -38,12 +38,12 @@
  * Include this for easy XFree86 customisations
  */
 #ifndef SiteIConfigFiles
-#define SiteIConfigFiles $(IRULESRC)/xf86site.def $(IRULESRC)/host.def
+#define SiteIConfigFiles $(IRULESRC)/xorgsite.def $(IRULESRC)/host.def
 #endif
 
 #include <host.def>
 
-#include <xf86site.def>
+#include <xorgsite.def>
 
 /* On systems where cpp doesn't correctly expand macros in include directives
  * the two following macros need to be defined directly (where "X11" is
@@ -138,7 +138,7 @@
 /* You MAY need SetUID if users run the server by hand or under xinit */
 /* Consult your system administrator before making the X server setuid */
 /*
-#ifdef XFree86Version
+#if defined(XFree86Version) || defined (XorgVersion)
 #define InstallXserverSetUID YES
 #endif
 */

Index: site.sample
===================================================================
RCS file: /cvs/xorg/xc/config/cf/site.sample,v
retrieving revision 1.1
retrieving revision 1.1.6.1
diff -u -d -r1.1 -r1.1.6.1
--- a/site.sample	14 Nov 2003 15:54:29 -0000	1.1
+++ b/site.sample	29 Mar 2004 15:45:28 -0000	1.1.6.1
@@ -60,7 +60,7 @@
 
 #ifdef AfterVendorCF
 
-#define ProjectRoot /usr/X11R6.4
+#define ProjectRoot Concat(/usr/X11R,XORG_VERSION_MAJOR.XORG_VERSION_MINOR)
 
 /* Only set HasXdmAuth to YES if you have a Wraphelp.c file. */
 /* #define HasXdmAuth YES */
@@ -109,7 +109,7 @@
 /* You MAY need SetUID if users run the server by hand or under xinit */
 /* Consult your system administrator before making the X server setuid */
 /*
-#ifdef XFree86Version
+#if defined(XFree86Version) || defined(XorgVersion)
 #define InstallXserverSetUID YES
 #endif
 */

Index: svr3.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/svr3.cf,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/svr3.cf	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/svr3.cf	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -343,6 +343,6 @@
 #include <sv3Lib.rules>
 
 #ifdef i386Architecture
-#include <xfree86.cf>
+#include <xorg.cf>
 #endif
 

Index: svr4.cf
===================================================================
RCS file: /cvs/xorg/xc/config/cf/svr4.cf,v
retrieving revision 1.1.4.2.2.1
retrieving revision 1.1.4.2.2.2
diff -u -d -r1.1.4.2.2.1 -r1.1.4.2.2.2
--- a/svr4.cf	17 Mar 2004 20:25:00 -0000	1.1.4.2.2.1
+++ b/svr4.cf	29 Mar 2004 15:45:28 -0000	1.1.4.2.2.2
@@ -265,7 +265,7 @@
 #ifndef DoLoadableServer
 #define DoLoadableServer	YES
 #endif
-#include <xfree86.cf>
+#include <xorg.cf>
 #endif
 
 #ifndef DoLoadableServer

Index: xf86.tmpl
===================================================================
RCS file: /cvs/xorg/xc/config/cf/xf86.tmpl,v
retrieving revision 1.1.4.1.2.1
retrieving revision 1.1.4.1.2.2
diff -u -d -r1.1.4.1.2.1 -r1.1.4.1.2.2
--- a/xf86.tmpl	17 Mar 2004 20:25:00 -0000	1.1.4.1.2.1
+++ b/xf86.tmpl	29 Mar 2004 15:45:28 -0000	1.1.4.1.2.2
@@ -7,7 +7,7 @@
 #ifdef BuilderEMailAddr
 BUILDERADDR = BuilderEMailAddr
 #else 
-BUILDERADDR = "xfree86 at xfree86.org"
+BUILDERADDR = "xorg at freedesktop.org"
 #endif
 BUGMSG = -DBUILDERADDR='$(BUILDERADDR)'
 


