[PATCH] dix: improve pointer acceleration API
Simon Thum
simon.thum at gmx.de
Sat Jun 6 05:49:43 PDT 2009
This makes the ptr accel api actually sensible from a driver
perspective, since the device is now a parameter of the
device-specific accel callback.
---
dix/ptrveloc.c | 40 +++++++++++++++++++++++++++-------------
include/ptrveloc.h | 14 ++++++++++++--
2 files changed, 39 insertions(+), 15 deletions(-)
diff --git a/dix/ptrveloc.c b/dix/ptrveloc.c
index dd26477..8b9b065 100644
--- a/dix/ptrveloc.c
+++ b/dix/ptrveloc.c
@@ -63,7 +63,7 @@
int
SetAccelerationProfile(DeviceVelocityPtr s, int profile_num);
static float
-SimpleSmoothProfile(DeviceVelocityPtr pVel, float velocity,
+SimpleSmoothProfile(DeviceIntPtr pDev, DeviceVelocityPtr pVel, float velocity,
float threshold, float acc);
static PointerAccelerationProfileFunc
GetAccelerationProfile(DeviceVelocityPtr s, int profile_num);
@@ -108,7 +108,7 @@ InitVelocityData(DeviceVelocityPtr s)
/**
* Clean up
*/
-static void
+void
FreeVelocityData(DeviceVelocityPtr s){
xfree(s->tracker);
SetAccelerationProfile(s, PROFILE_UNINITIALIZE);
@@ -555,7 +555,7 @@ QueryTrackers(DeviceVelocityPtr s, int cur_t){
* Perform velocity approximation based on 2D 'mickeys' (mouse motion delta).
* return true if non-visible state reset is suggested
*/
-static short
+short
ProcessVelocityData2D(
DeviceVelocityPtr s,
int dx,
@@ -616,15 +616,16 @@ ApplySofteningAndConstantDeceleration(
/*
* compute the acceleration for given velocity and enforce min_acceleartion
*/
-static float
+float
BasicComputeAcceleration(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float threshold,
float acc){
float result;
- result = pVel->Profile(pVel, velocity, threshold, acc);
+ result = pVel->Profile(pDev, pVel, velocity, threshold, acc);
/* enforce min_acceleration */
if (result < pVel->min_acceleration)
@@ -637,6 +638,7 @@ BasicComputeAcceleration(
*/
static float
ComputeAcceleration(
+ DeviceIntPtr pDev,
DeviceVelocityPtr vel,
float threshold,
float acc){
@@ -655,9 +657,11 @@ ComputeAcceleration(
* current and previous velocity.
* Though being the more natural choice, it causes a minor delay
* in comparison, so it can be disabled. */
- res = BasicComputeAcceleration(vel, vel->velocity, threshold, acc);
- res += BasicComputeAcceleration(vel, vel->last_velocity, threshold, acc);
- res += 4.0f * BasicComputeAcceleration(vel,
+ res = BasicComputeAcceleration(
+ pDev, vel, vel->velocity, threshold, acc);
+ res += BasicComputeAcceleration(
+ pDev, vel, vel->last_velocity, threshold, acc);
+ res += 4.0f * BasicComputeAcceleration(pDev, vel,
(vel->last_velocity + vel->velocity) / 2,
threshold, acc);
res /= 6.0f;
@@ -665,7 +669,8 @@ ComputeAcceleration(
vel->velocity, vel->last_velocity, res);
return res;
}else{
- res = BasicComputeAcceleration(vel, vel->velocity, threshold, acc);
+ res = BasicComputeAcceleration(pDev, vel,
+ vel->velocity, threshold, acc);
DebugAccelF("(dix ptracc) profile sample [%.2f] is %.3f\n",
vel->velocity, res);
return res;
@@ -682,6 +687,7 @@ ComputeAcceleration(
*/
static float
PolynomialAccelerationProfile(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float ignored,
@@ -697,18 +703,21 @@ PolynomialAccelerationProfile(
*/
static float
ClassicProfile(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float threshold,
float acc)
{
- if (threshold) {
- return SimpleSmoothProfile (pVel,
+ if (threshold > 0) {
+ return SimpleSmoothProfile (pDev,
+ pVel,
velocity,
threshold,
acc);
} else {
- return PolynomialAccelerationProfile (pVel,
+ return PolynomialAccelerationProfile (pDev,
+ pVel,
velocity,
0,
acc);
@@ -726,6 +735,7 @@ ClassicProfile(
*/
static float
PowerProfile(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float threshold,
@@ -763,6 +773,7 @@ CalcPenumbralGradient(float x){
*/
static float
SimpleSmoothProfile(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float threshold,
@@ -788,6 +799,7 @@ SimpleSmoothProfile(
*/
static float
SmoothLinearProfile(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float threshold,
@@ -818,6 +830,7 @@ SmoothLinearProfile(
static float
LinearProfile(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float threshold,
@@ -829,6 +842,7 @@ LinearProfile(
static float
NoProfile(
+ DeviceIntPtr pDev,
DeviceVelocityPtr pVel,
float velocity,
float threshold,
@@ -992,7 +1006,7 @@ acceleratePointerPredictable(
if (pDev->ptrfeed && pDev->ptrfeed->ctrl.num) {
/* invoke acceleration profile to determine acceleration */
- mult = ComputeAcceleration (velocitydata,
+ mult = ComputeAcceleration (pDev, velocitydata,
pDev->ptrfeed->ctrl.threshold,
(float)pDev->ptrfeed->ctrl.num /
(float)pDev->ptrfeed->ctrl.den);
diff --git a/include/ptrveloc.h b/include/ptrveloc.h
index 83d188c..97badd9 100644
--- a/include/ptrveloc.h
+++ b/include/ptrveloc.h
@@ -47,8 +47,8 @@ struct _DeviceVelocityRec;
* returns actual acceleration depending on velocity, acceleration control,...
*/
typedef float (*PointerAccelerationProfileFunc)
- (struct _DeviceVelocityRec* /*pVel*/,
- float /*velocity*/, float /*threshold*/, float /*acc*/);
+ (DeviceIntPtr pDev, struct _DeviceVelocityRec* pVel,
+ float velocity, float threshold, float accelCoeff);
/**
* a motion history, with just enough information to
@@ -96,6 +96,16 @@ InitVelocityData(DeviceVelocityPtr s);
extern _X_EXPORT void
InitTrackers(DeviceVelocityPtr s, int ntracker);
+extern _X_EXPORT short
+ProcessVelocityData2D(DeviceVelocityPtr s, int dx, int dy, int time);
+
+extern _X_EXPORT float
+BasicComputeAcceleration(DeviceIntPtr pDev, DeviceVelocityPtr pVel,
+ float velocity, float threshold, float acc);
+
+extern _X_EXPORT void
+FreeVelocityData(DeviceVelocityPtr s);
+
extern _X_EXPORT BOOL
InitializePredictableAccelerationProperties(DeviceIntPtr pDev);
--
1.6.0.6
--------------090901070307050205000102
Content-Type: text/plain;
name="0002-dix-make-part-of-ptrveloc.h-internal.patch"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="0002-dix-make-part-of-ptrveloc.h-internal.patch"
More information about the xorg-devel
mailing list