[PATCH] Add Clickpad support (v2)

Takashi Iwai tiwai at suse.de
Wed Apr 21 02:02:27 PDT 2010


This patch adds the support for Synaptics Clickpad devices.
It requires the change in Linux kernel synaptics input driver, found in
	https://patchwork.kernel.org/patch/92435/
The kernel patch is already included in linux-input GIT tree, which
will hit Linus tree sooner or later.

When the kernel driver sets only the left-button bit evbit, Clickpad
mode is activated.  In this mode, the bottom touch area is used as
button emulations.  Clicking at the bottom-left, bottom-center and
bottom-right zone corresponds to a left, center and right click.

Signed-off-by: Takashi Iwai <tiwai at suse.de>
---

In this version, I dropped the parameters and simplified as much as
possible.  I tried to remove the code to disable pointer moves, but
it results in the non-working dragging, as it seems relevant with
multi-tapping stuff.  So it's still there.


 src/eventcomm.c    |    6 ++++
 src/synaptics.c    |   72 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 src/synapticsstr.h |    2 +
 3 files changed, 79 insertions(+), 1 deletions(-)

diff --git a/src/eventcomm.c b/src/eventcomm.c
index d00d810..10d183d 100644
--- a/src/eventcomm.c
+++ b/src/eventcomm.c
@@ -252,6 +252,12 @@ event_query_axis_ranges(LocalDevicePtr local)
 	if ((priv->has_triple = (TEST_BIT(BTN_TOOL_TRIPLETAP, keybits) != 0)))
 	   strcat(buf, " triple");
 	xf86Msg(X_INFO, "%s: buttons:%s\n", local->name, buf);
+
+	/* clickpad device reports only the single left button mask */
+	if (priv->has_left && !priv->has_right && !priv->has_middle) {
+	    priv->is_clickpad = TRUE;
+	    xf86Msg(X_INFO, "%s: is Clickpad device\n", local->name);
+	}
     }
 }
 
diff --git a/src/synaptics.c b/src/synaptics.c
index 091dbe1..951b3fa 100644
--- a/src/synaptics.c
+++ b/src/synaptics.c
@@ -457,6 +457,18 @@ static void set_default_parameters(LocalDevicePtr local)
         vertResolution = priv->resy;
     }
 
+    /* Clickpad mode -- bottom area is used as buttons */
+    if (priv->is_clickpad) {
+	int button_bottom;
+	/* Clickpad devices usually the button area at the bottom, and
+	 * its size seems ca. 20% of the touchpad height no matter how
+	 * large the pad is.
+	 */
+	button_bottom = priv->maxy - (abs(priv->maxy - priv->miny) * 20) / 100;
+	if (button_bottom < b && button_bottom >= t)
+	    b = button_bottom;
+    }
+
     /* set the parameters */
     pars->left_edge = xf86SetIntOption(opts, "LeftEdge", l);
     pars->right_edge = xf86SetIntOption(opts, "RightEdge", r);
@@ -2052,6 +2064,59 @@ HandleClickWithFingers(SynapticsParameters *para, struct SynapticsHwState *hw)
     }
 }
 
+/* clickpad event handling */
+static void
+HandleClickpad(LocalDevicePtr local, struct SynapticsHwState *hw, edge_type edge)
+{
+    SynapticsPrivate *priv = (SynapticsPrivate *) (local->private);
+    SynapticsParameters *para = &priv->synpara;
+
+    if (edge & BOTTOM_EDGE) {
+	/* button area */
+	int width = priv->maxx - priv->minx;
+	int left_button_x, right_button_x;
+
+	/* left and right clickpad button ranges;
+	 * the gap between them is interpreted as a middle-button click
+	 */
+	left_button_x = width * 2/ 5 + priv->minx;
+	right_button_x = width * 3 / 5 + priv->minx;
+
+	/* clickpad reports only one button, and we need
+	 * to fake left/right buttons depending on the touch position
+	 */
+	if (hw->left) { /* clicked? */
+	    hw->left = 0;
+	    if (hw->x < left_button_x)
+		hw->left = 1;
+	    else if (hw->x > right_button_x)
+		hw->right = 1;
+	    else
+		hw->middle = 1;
+	}
+
+	/* Don't move pointer position in the button area during clicked,
+	 * except for horiz/vert scrolling is enabled.
+	 *
+	 * The synaptics driver tends to be pretty sensitive.  This hack
+	 * is to avoid that the pointer moves slightly and misses the
+	 * poistion you aimed to click.
+	 *
+	 * Also, when the pointer movement is reported, the dragging
+	 * (with a sort of multi-touching) doesn't work well, too.
+	 */
+	if (hw->left || !(para->scroll_edge_horiz ||
+			  ((edge & RIGHT_EDGE) && para->scroll_edge_vert)))
+	    hw->z = 0; /* don't move pointer */
+
+    } else if (hw->left) {
+	/* dragging */
+	hw->left = priv->prev_hw.left;
+	hw->right = priv->prev_hw.right;
+	hw->middle = priv->prev_hw.middle;
+    }
+    priv->prev_hw = *hw;
+}
 
 /*
  * React on changes in the hardware state. This function is called every time
@@ -2102,6 +2167,12 @@ HandleState(LocalDevicePtr local, struct SynapticsHwState *hw)
     if (para->touchpad_off == 1)
 	return delay;
 
+    edge = edge_detection(priv, hw->x, hw->y);
+
+    /* Clickpad handling for button area */
+    if (priv->is_clickpad)
+	HandleClickpad(local, hw, edge);
+
     /* Treat the first two multi buttons as up/down for now. */
     hw->up |= hw->multi[0];
     hw->down |= hw->multi[1];
@@ -2152,7 +2223,6 @@ HandleState(LocalDevicePtr local, struct SynapticsHwState *hw)
 	hw->multi[2] = hw->multi[3] = FALSE;
     }
 
-    edge = edge_detection(priv, hw->x, hw->y);
     inside_active_area = is_inside_active_area(priv, hw->x, hw->y);
 
     finger = SynapticsDetectFinger(priv, hw);
diff --git a/src/synapticsstr.h b/src/synapticsstr.h
index bd19c79..05e43d3 100644
--- a/src/synapticsstr.h
+++ b/src/synapticsstr.h
@@ -232,6 +232,8 @@ typedef struct _SynapticsPrivateRec
     Bool has_double;			/* double click detected for this device */
     Bool has_triple;			/* triple click detected for this device */
     Bool has_pressure;			/* device reports pressure */
+    Bool is_clickpad;			/* is Clickpad device (one-button) */
+    struct SynapticsHwState prev_hw;	/* previous h/w state (for clickpad) */
 
     enum TouchpadModel model;          /* The detected model */
 } SynapticsPrivate;
-- 
1.7.0.4



More information about the xorg-devel mailing list