[PATCH synaptics 07/11] Support percent values for area.

[Peter Hutterer]

AreaTopEdge and the other three can be specified as either an absolute
value, or as a percent of the matching dimension.

Option "AreaBottomEdge" "80%" will thus set the bottom edge of the input
area to 80% of the height of the touchpad, with the lower 20% being the dead
area.

Signed-off-by: Peter Hutterer <peter.hutterer at who-t.net>
---
 man/synaptics.man |   16 ++++++++++++----
 src/synaptics.c   |   35 +++++++++++++++++++++++++++++++----
 2 files changed, 43 insertions(+), 8 deletions(-)

diff --git a/man/synaptics.man b/man/synaptics.man
index f201230..328d853 100644
--- a/man/synaptics.man
+++ b/man/synaptics.man
@@ -458,28 +458,36 @@ Property: "Synaptics Pad Resolution"
 Ignore movements, scrolling and tapping which take place left of this edge.
 .
 The option is disabled by default and can be enabled by setting the
-AreaLeftEdge option to any integer value other than zero. Property: "Synaptics Area"
+AreaLeftEdge option to any integer value other than zero. If supported by the
+server (version 1.9 and later), the edge may be specified in percent of
+the total width of the touchpad. Property: "Synaptics Area"
 .
 .TP
 .BI "Option \*qAreaRightEdge\*q \*q" integer \*q
 Ignore movements, scrolling and tapping which take place right of this edge.
 .
 The option is disabled by default and can be enabled by setting the
-AreaRightEdge option to any integer value other than zero. Property: "Synaptics Area"
+AreaRightEdge option to any integer value other than zero. If supported by the
+server (version 1.9 and later), the edge may be specified in percent of
+the total width of the touchpad. Property: "Synaptics Area"
 .
 .TP
 .BI "Option \*qAreaTopEdge\*q \*q" integer \*q
 Ignore movements, scrolling and tapping which take place above this edge.
 .
 The option is disabled by default and can be enabled by setting the
-AreaTopEdge option to any integer value other than zero. Property: "Synaptics Area"
+AreaTopEdge option to any integer value other than zero. If supported by the
+server (version 1.9 and later), the edge may be specified in percent of
+the total width of the touchpad. Property: "Synaptics Area"
 .
 .TP
 .BI "Option \*qAreaBottomEdge\*q \*q" integer \*q
 Ignore movements, scrolling and tapping which take place below this edge.
 .
 The option is disabled by default and can be enabled by setting the
-AreaBottomEdge option to any integer value other than zero. Property: "Synaptics Area"
+AreaBottomEdge option to any integer value other than zero. If supported by the
+server (version 1.9 and later), the edge may be specified in percent of
+the total width of the touchpad. Property: "Synaptics Area"
 .
 
 .SH CONFIGURATION DETAILS
diff --git a/src/synaptics.c b/src/synaptics.c
index fae071d..46faf1d 100644
--- a/src/synaptics.c
+++ b/src/synaptics.c
@@ -329,6 +329,28 @@ calculate_edge_widths(SynapticsPrivate *priv, int *l, int *r, int *t, int *b)
     *b = priv->maxy - eheight;
 }
 
+/* Area options support both percent values and absolute values. This is
+ * awkward. The xf86Set* calls will print to the log, but they'll
+ * also print an error if we request a percent value but only have an
+ * int. So - check first for percent, then call xf86Set* again to get
+ * the log message.
+ */
+static int set_percent_option(pointer options, const char* optname,
+                              const int range, const int offset)
+{
+    int result;
+#if GET_ABI_MAJOR(ABI_XINPUT_VERSION) >= 11
+    int percent = xf86CheckPercentOption(options, optname, -1);
+
+    if (percent != -1) {
+        percent = xf86SetPercentOption(options, optname, -1);
+        result = percent/100.0 * range + offset;
+    } else
+#endif
+        result = xf86SetIntOption(options, optname, 0);
+
+    return result;
+}
 
 static void set_default_parameters(LocalDevicePtr local)
 {
@@ -466,10 +488,15 @@ static void set_default_parameters(LocalDevicePtr local)
     pars->top_edge = xf86SetIntOption(opts, "TopEdge", t);
     pars->bottom_edge = xf86SetIntOption(opts, "BottomEdge", b);
 
-    pars->area_top_edge = xf86SetIntOption(opts, "AreaTopEdge", 0);
-    pars->area_bottom_edge = xf86SetIntOption(opts, "AreaBottomEdge", 0);
-    pars->area_left_edge = xf86SetIntOption(opts, "AreaLeftEdge", 0);
-    pars->area_right_edge = xf86SetIntOption(opts, "AreaRightEdge", 0);
+    pars->area_top_edge = set_percent_option(opts, "AreaTopEdge",
+                          priv->maxy - priv->miny, priv->miny);
+    pars->area_bottom_edge = set_percent_option(opts, "AreaBottomEdge",
+                          priv->maxy - priv->miny, priv->miny);
+
+    pars->area_left_edge = set_percent_option(opts, "AreaLeftEdge",
+                          priv->maxx - priv->minx, priv->minx);
+    pars->area_right_edge = set_percent_option(opts, "AreaRightEdge",
+                          priv->maxx - priv->minx, priv->minx);
 
     pars->finger_low = xf86SetIntOption(opts, "FingerLow", fingerLow);
     pars->finger_high = xf86SetIntOption(opts, "FingerHigh", fingerHigh);
-- 
1.7.0.1