[PATCH app-x11perf] config: substitute x11perfcompdir using Autoconf @x11perfcompdir@
Gaetan Nadon
memsize at videotron.ca
Sat Jan 22 11:49:17 PST 2011
Use the Autoconf recommended way of substituting bindir and friends, see
http://www.gnu.org/software/autoconf/manual/autoconf.html
Use # sign for comment in script.
Only sed is used, drop the cpp terminology.
Signed-off-by: Gaetan Nadon <memsize at videotron.ca>
---
Makefile.am | 25 +++++++------
configure.ac | 3 ++
x11pcomp.cpp | 103 --------------------------------------------------------
x11perfcomp.in | 103 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 119 insertions(+), 115 deletions(-)
delete mode 100644 x11pcomp.cpp
create mode 100644 x11perfcomp.in
diff --git a/Makefile.am b/Makefile.am
index 3b6d13b..60839b3 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -20,14 +20,8 @@
# PERFORMANCE OF THIS SOFTWARE.
SUBDIRS = man
-bin_PROGRAMS = x11perf
-
-bin_SCRIPTS = x11perfcomp
-
-LIBPATH = $(libdir)/X11/x11perfcomp
-x11perfcompdir = $(LIBPATH)
-dist_x11perfcomp_SCRIPTS = fillblnk perfboth perfratio Xmark
+bin_PROGRAMS = x11perf
AM_CFLAGS = $(CWARNFLAGS) $(XEXT_CFLAGS) $(XFT_CFLAGS) $(XRENDER_CFLAGS) $(X11PERF_CFLAGS)
x11perf_LDADD = $(XEXT_LIBS) $(XFT_LIBS) $(XRENDER_LIBS) $(X11PERF_LIBS) -lm
@@ -53,12 +47,19 @@ x11perf_SOURCES = \
x11perf.c \
x11perf.h
-x11perfcomp: x11pcomp.cpp
- $(AM_V_GEN)$(SED) s/LIBPATH/`echo $(LIBPATH) | sed -e s/\\\\//\\\\\\\\\\\\\//g`/ < $(srcdir)/x11pcomp.cpp | \
- $(SED) s/XCOMM/\#/ > $@
+bin_SCRIPTS = x11perfcomp
+CLEANFILES = $(bin_SCRIPTS)
+EXTRA_DIST = $(bin_SCRIPTS:=.in)
+DIR_SUBSTS = -e 's|@x11perfcompdir[@]|$(x11perfcompdir)|g'
+
+x11perfcomp: x11perfcomp.in
+ $(AM_V_GEN)$(SED) $(DIR_SUBSTS) < $< > $@
-CLEANFILES = $(bin_SCRIPTS) x11perfcomp
-EXTRA_DIST = x11pcomp.cpp
+dist_x11perfcomp_SCRIPTS = \
+ fillblnk \
+ perfboth \
+ perfratio \
+ Xmark
MAINTAINERCLEANFILES = ChangeLog INSTALL
diff --git a/configure.ac b/configure.ac
index 96126f2..d23c209 100644
--- a/configure.ac
+++ b/configure.ac
@@ -41,6 +41,9 @@ XORG_DEFAULT_OPTIONS
AC_TYPE_SIGNAL
+# Define the installation directory for the x11 performance compare scripts
+AC_SUBST([x11perfcompdir], [$libdir/X11/x11perfcomp])
+
# Checks for pkg-config packages
PKG_CHECK_MODULES(X11PERF, x11 xmuu)
diff --git a/x11pcomp.cpp b/x11pcomp.cpp
deleted file mode 100644
index be7d397..0000000
--- a/x11pcomp.cpp
+++ /dev/null
@@ -1,103 +0,0 @@
-XCOMM! /bin/sh
-XCOMM
-XCOMM $XFree86$
-XCOMM
-XCOMM Collects multiple outputs of x11perf. Just feed it a list of files, each
-XCOMM containing the output from an x11perf run, and this shell will extract the
-XCOMM object/second information and show it in tabular form. An 80-column line
-XCOMM is big enough to compare 4 different servers.
-XCOMM
-XCOMM This script normally uses the results from $1 to extract the test label
-XCOMM descriptions, so you can run x11perf on a subset of the test and then
-XCOMM compare the results. But note that x11perffill requires the labels file
-XCOMM to be a superset of the x11perf results file. If you run into an ugly
-XCOMM situation in which none of the servers completes the desired tests
-XCOMM (quite possible on non-DEC servers :), you can use -l <filename> as $1 and
-XCOMM $2 to force x11perfcomp to use the labels stored in file $2. (You can run
-XCOMM x11perf with the -labels option to generate such a file.)
-XCOMM
-XCOMM Mark Moraes, University of Toronto <moraes at csri.toronto.edu>
-XCOMM Joel McCormack, DEC Western Research Lab <joel at decwrl.dec.com>
-XCOMM
-
-PATH=LIBPATH:.:$PATH
-export PATH
-
-set -e
-tmp=${TMPDIR-/tmp}/rates.$$
-trap "rm -rf $tmp" 0 1 2 15
-mkdir $tmp || exit 1
-mkdir $tmp/rates
-ratio=
-allfiles=
-XCOMM Include relative rates in output? Report only relative rates?
-case $1 in
--r|-a)
- ratio=1
- shift;
- ;;
--ro)
- ratio=2
- shift;
- ;;
-esac
-XCOMM Get either the provided label file, or construct one from all the
-XCOMM files given.
-case $1 in
--l) cp $2 $tmp/labels
- shift; shift
- ;;
-*) for file in "$@"; do
- awk '$2 == "reps" || $2 == "trep" { print $0; next; }' $file |
- sed 's/^.*: //' |
- sed 's/ /_/g' |
- awk 'NR > 1 { printf ("%s %s\n", prev, $0); } \
- { prev = $0; }'
- done | tsort 2>/dev/null | sed 's/_/ /g' > $tmp/labels
- ;;
-esac
-XCOMM Go through all files, and create a corresponding rate file for each
-n=1
-for i
-do
-XCOMM Get lines with average numbers, fill in any tests that may be missing
-XCOMM then extract the rate field
- base=`basename $i`
- (echo " $n "
- echo '--------'
- awk '$2 == "reps" || $2 == "trep" { \
- line = $0; \
- next; \
- } \
- NF == 0 && line != "" { \
- print line; \
- line=""; \
- next; \
- } \
- ' $i > $tmp/$n.avg
- fillblnk $tmp/$n.avg $tmp/labels |
- sed 's/( *\([0-9]*\)/(\1/' |
- awk '$2 == "reps" || $2 == "trep" { \
- n = substr($6,2,length($6)-7); \
- printf "%8s\n", n; \
- }'
- ) > $tmp/rates/$n
- echo "$n: $i"
- allfiles="$allfiles$tmp/rates/$n "
- n=`expr $n + 1`
-done
-case x$ratio in
-x)
- ratio=/bin/cat
- ;;
-x1)
- ratio="perfboth $n"
- ;;
-*)
- ratio="perfratio $n"
- ;;
-esac
-echo ''
-(echo Operation; echo '---------'; cat $tmp/labels) |
-paste $allfiles - | sed 's/ / /g' | $ratio
-rm -rf $tmp
diff --git a/x11perfcomp.in b/x11perfcomp.in
new file mode 100644
index 0000000..50af117
--- /dev/null
+++ b/x11perfcomp.in
@@ -0,0 +1,103 @@
+#! /bin/sh
+#
+# $XFree86$
+#
+# Collects multiple outputs of x11perf. Just feed it a list of files, each
+# containing the output from an x11perf run, and this shell will extract the
+# object/second information and show it in tabular form. An 80-column line
+# is big enough to compare 4 different servers.
+#
+# This script normally uses the results from $1 to extract the test label
+# descriptions, so you can run x11perf on a subset of the test and then
+# compare the results. But note that x11perffill requires the labels file
+# to be a superset of the x11perf results file. If you run into an ugly
+# situation in which none of the servers completes the desired tests
+# (quite possible on non-DEC servers :), you can use -l <filename> as $1 and
+# $2 to force x11perfcomp to use the labels stored in file $2. (You can run
+# x11perf with the -labels option to generate such a file.)
+#
+# Mark Moraes, University of Toronto <moraes at csri.toronto.edu>
+# Joel McCormack, DEC Western Research Lab <joel at decwrl.dec.com>
+#
+
+PATH=@x11perfcompdir@:.:$PATH
+export PATH
+
+set -e
+tmp=${TMPDIR-/tmp}/rates.$$
+trap "rm -rf $tmp" 0 1 2 15
+mkdir $tmp || exit 1
+mkdir $tmp/rates
+ratio=
+allfiles=
+# Include relative rates in output? Report only relative rates?
+case $1 in
+-r|-a)
+ ratio=1
+ shift;
+ ;;
+-ro)
+ ratio=2
+ shift;
+ ;;
+esac
+# Get either the provided label file, or construct one from all the
+# files given.
+case $1 in
+-l) cp $2 $tmp/labels
+ shift; shift
+ ;;
+*) for file in "$@"; do
+ awk '$2 == "reps" || $2 == "trep" { print $0; next; }' $file |
+ sed 's/^.*: //' |
+ sed 's/ /_/g' |
+ awk 'NR > 1 { printf ("%s %s\n", prev, $0); } \
+ { prev = $0; }'
+ done | tsort 2>/dev/null | sed 's/_/ /g' > $tmp/labels
+ ;;
+esac
+# Go through all files, and create a corresponding rate file for each
+n=1
+for i
+do
+# Get lines with average numbers, fill in any tests that may be missing
+# then extract the rate field
+ base=`basename $i`
+ (echo " $n "
+ echo '--------'
+ awk '$2 == "reps" || $2 == "trep" { \
+ line = $0; \
+ next; \
+ } \
+ NF == 0 && line != "" { \
+ print line; \
+ line=""; \
+ next; \
+ } \
+ ' $i > $tmp/$n.avg
+ fillblnk $tmp/$n.avg $tmp/labels |
+ sed 's/( *\([0-9]*\)/(\1/' |
+ awk '$2 == "reps" || $2 == "trep" { \
+ n = substr($6,2,length($6)-7); \
+ printf "%8s\n", n; \
+ }'
+ ) > $tmp/rates/$n
+ echo "$n: $i"
+ allfiles="$allfiles$tmp/rates/$n "
+ n=`expr $n + 1`
+done
+case x$ratio in
+x)
+ ratio=/bin/cat
+ ;;
+x1)
+ ratio="perfboth $n"
+ ;;
+*)
+ ratio="perfratio $n"
+ ;;
+esac
+echo ''
+(echo Operation; echo '---------'; cat $tmp/labels) |
+paste $allfiles - | sed 's/ / /g' | $ratio
+rm -rf $tmp
--
1.6.0.4
More information about the xorg-devel
mailing list