[PATCH libX11] xcb_io: Fix Xlib 32-bit request number issues

Jonas Petersen jnsptrsn1 at gmail.com
Sun Aug 24 04:13:05 PDT 2014


By design, on 32-bit systems, the Xlib internal 32-bit request sequence
numbers may wrap. There is some locations within xcb_io.c that are not
wrap-safe though. The value of last_flushed relies on request to be
sequential all the time. This is not given in the moment when the
sequence has just wrapped. Applications may then crash with a
"Fatal IO error 11 (Resource temporarily unavailable)".

This patch fixes this by "unwrapping" the sequence number when needed to
retain the sequence relative to last_flushed. It also contains some
additional optimizations.

Signed-off-by: Jonas Petersen <jnsptrsn1 at gmail.com>
---
 src/Xxcbint.h |  2 +-
 src/xcb_io.c  | 27 +++++++++++++++++++++------
 2 files changed, 22 insertions(+), 7 deletions(-)

diff --git a/src/Xxcbint.h b/src/Xxcbint.h
index bf41c23..feee775 100644
--- a/src/Xxcbint.h
+++ b/src/Xxcbint.h
@@ -31,7 +31,7 @@ typedef struct _X11XCBPrivate {
 	char *reply_data;
 	int reply_length;
 	int reply_consumed;
-	uint64_t last_flushed;
+	unsigned long last_flushed;
 	enum XEventQueueOwner event_owner;
 	XID next_xid;
 
diff --git a/src/xcb_io.c b/src/xcb_io.c
index 5987329..03af1f9 100644
--- a/src/xcb_io.c
+++ b/src/xcb_io.c
@@ -59,15 +59,19 @@ static void require_socket(Display *dpy)
 {
 	if(dpy->bufmax == dpy->buffer)
 	{
-		uint64_t sent;
+		uint64_t sent64;
+		unsigned long sent;
 		int flags = 0;
 		/* if we don't own the event queue, we have to ask XCB
 		 * to set our errors aside for us. */
 		if(dpy->xcb->event_owner != XlibOwnsEventQueue)
 			flags = XCB_REQUEST_CHECKED;
 		if(!xcb_take_socket(dpy->xcb->connection, return_socket, dpy,
-		                    flags, &sent))
+		                    flags, &sent64))
 			_XIOError(dpy);
+
+		sent = sent64;
+
 		/* Xlib uses unsigned long for sequence numbers.  XCB
 		 * uses 64-bit internally, but currently exposes an
 		 * unsigned int API.  If these differ, Xlib cannot track
@@ -77,7 +81,7 @@ static void require_socket(Display *dpy)
 		 * 64-bit sequence numbers. */
 		if (sizeof(unsigned long) > sizeof(unsigned int) &&
 		    dpy->xcb->event_owner == XlibOwnsEventQueue &&
-		    (sent - dpy->last_request_read >= (UINT64_C(1) << 32))) {
+		    (long) (sent - dpy->last_request_read) < 0) {
 			throw_thread_fail_assert("Sequence number wrapped "
 			                         "beyond 32 bits while Xlib "
 						 "did not own the socket",
@@ -455,7 +459,7 @@ void _XSend(Display *dpy, const char *data, long size)
 	static const xReq dummy_request;
 	static char const pad[3];
 	struct iovec vec[3];
-	uint64_t requests;
+	uint64_t requests, unwrapped_request;
 	_XExtension *ext;
 	xcb_connection_t *c = dpy->xcb->connection;
 	if(dpy->flags & XlibDisplayIOError)
@@ -464,6 +468,13 @@ void _XSend(Display *dpy, const char *data, long size)
 	if(dpy->bufptr == dpy->buffer && !size)
 		return;
 
+	unwrapped_request = dpy->request;
+	/* If there was a sequence number wrap since our last flush,
+	 * make sure the sequence number we use, stays in sequence
+	 * with dpy->xcb->last_flush. */
+	if (sizeof(uint64_t) > sizeof(unsigned long) && dpy->request < dpy->xcb->last_flushed)
+		unwrapped_request += UINT64_C(1) << 32;
+
 	/* iff we asked XCB to set aside errors, we must pick those up
 	 * eventually. iff there are async handlers, we may have just
 	 * issued requests that will generate replies. in either case,
@@ -471,10 +482,14 @@ void _XSend(Display *dpy, const char *data, long size)
 	if(dpy->xcb->event_owner != XlibOwnsEventQueue || dpy->async_handlers)
 	{
 		uint64_t sequence;
-		for(sequence = dpy->xcb->last_flushed + 1; sequence <= dpy->request; ++sequence)
+		for(sequence = (uint64_t) dpy->xcb->last_flushed + 1; sequence <= unwrapped_request; ++sequence)
+			/* On systems where unsigned long is 32 bits, the 64-bit sequence
+			 * passed to append_pending_request might get trimmed off.
+			 * This is logically correct and expected, as it's simply
+			 * 're-wrapping' the 'unwrapped' sequence number. */
 			append_pending_request(dpy, sequence);
 	}
-	requests = dpy->request - dpy->xcb->last_flushed;
+	requests = unwrapped_request - dpy->xcb->last_flushed;
 	dpy->xcb->last_flushed = dpy->request;
 
 	vec[0].iov_base = dpy->buffer;
-- 
1.9.1



More information about the xorg-devel mailing list