vesa and 2560x1440

[basteon]

I use Xorg configuration:

Section "Monitor"
 Modeline        "2560x1440_60"  241.50  2560 2608 2640 2720  1440
1443 1448 1481 +hsync +vsync
 HorizSync       89.40
VertRefresh     60.00
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

There I setting up 2560x1440 resolution and not enywere else.

On 10/19/14, Michal Suchanek <hramrach at gmail.com> wrote:
> On 19 October 2014 05:49, basteon <basteon at gmail.com> wrote:
>> Bu I don't use /dev/fb0 when I do load my system.
>> i.e. in initramfs I ddin't load radeon drivers.
>>
>>>Did you try setting the resolution lower in case the transmitter you
>>>are using cannot handle a mode this large?
>> where I should setting this?
>> When I loads radeon driver I've disabled Xorg at all.
>
>
>
> On 18 October 2014 07:51, basteon <basteon at gmail.com> wrote:
>> hello,
>> I made dmesg output from ssh connected from another host.
>>
> ...
>> On 10/13/14, Michal Suchanek <hramrach at gmail.com> wrote:
>>> Hello,
>>>
> ...
>>> What connection do you use to connect the display? Some connections
>>> may not be able to use full resolution. Can you try using fbset or
>>> xrandr to switch to lower resolution once the module is inserted?
>