[PATCH synaptics] conf: rename to 70-synaptics.conf

[Stefan Dirsch]

Bump up synaptics driver to 70, so it get's perferred over libipnut,
which was dropped down to 60. Reason is, that synaptics driver is more
of an additional driver, which then should be installed if installed.

Similar to what was done for wacom configuration file.

https://bugzilla.suse.com/show_bug.cgi?id=979554

Signed-off-by: Stefan Dirsch <sndirsch at suse.de>
---
 conf/50-synaptics.conf | 46 ----------------------------------------------
 conf/70-synaptics.conf | 46 ++++++++++++++++++++++++++++++++++++++++++++++
 conf/Makefile.am       |  2 +-
 man/synaptics.man      |  2 +-
 4 files changed, 48 insertions(+), 48 deletions(-)
 delete mode 100644 conf/50-synaptics.conf
 create mode 100644 conf/70-synaptics.conf

diff --git a/conf/50-synaptics.conf b/conf/50-synaptics.conf
deleted file mode 100644
index aa50456..0000000
--- a/conf/50-synaptics.conf
+++ /dev/null
@@ -1,46 +0,0 @@
-# Example xorg.conf.d snippet that assigns the touchpad driver
-# to all touchpads. See xorg.conf.d(5) for more information on
-# InputClass.
-# DO NOT EDIT THIS FILE, your distribution will likely overwrite
-# it when updating. Copy (and rename) this file into
-# /etc/X11/xorg.conf.d first.
-# Additional options may be added in the form of
-#   Option "OptionName" "value"
-#
-Section "InputClass"
-        Identifier "touchpad catchall"
-        Driver "synaptics"
-        MatchIsTouchpad "on"
-# This option is recommend on all Linux systems using evdev, but cannot be
-# enabled by default. See the following link for details:
-# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
-#       MatchDevicePath "/dev/input/event*"
-EndSection
-
-Section "InputClass"
-        Identifier "touchpad ignore duplicates"
-        MatchIsTouchpad "on"
-        MatchOS "Linux"
-        MatchDevicePath "/dev/input/mouse*"
-        Option "Ignore" "on"
-EndSection
-
-# This option enables the bottom right corner to be a right button on clickpads
-# and the right and middle top areas to be right / middle buttons on clickpads
-# with a top button area.
-# This option is only interpreted by clickpads.
-Section "InputClass"
-        Identifier "Default clickpad buttons"
-        MatchDriver "synaptics"
-        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
-        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
-EndSection
-
-# This option disables software buttons on Apple touchpads.
-# This option is only interpreted by clickpads.
-Section "InputClass"
-        Identifier "Disable clickpad buttons on Apple touchpads"
-        MatchProduct "Apple|bcm5974"
-        MatchDriver "synaptics"
-        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
-EndSection
diff --git a/conf/70-synaptics.conf b/conf/70-synaptics.conf
new file mode 100644
index 0000000..aa50456
--- /dev/null
+++ b/conf/70-synaptics.conf
@@ -0,0 +1,46 @@
+# Example xorg.conf.d snippet that assigns the touchpad driver
+# to all touchpads. See xorg.conf.d(5) for more information on
+# InputClass.
+# DO NOT EDIT THIS FILE, your distribution will likely overwrite
+# it when updating. Copy (and rename) this file into
+# /etc/X11/xorg.conf.d first.
+# Additional options may be added in the form of
+#   Option "OptionName" "value"
+#
+Section "InputClass"
+        Identifier "touchpad catchall"
+        Driver "synaptics"
+        MatchIsTouchpad "on"
+# This option is recommend on all Linux systems using evdev, but cannot be
+# enabled by default. See the following link for details:
+# http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html
+#       MatchDevicePath "/dev/input/event*"
+EndSection
+
+Section "InputClass"
+        Identifier "touchpad ignore duplicates"
+        MatchIsTouchpad "on"
+        MatchOS "Linux"
+        MatchDevicePath "/dev/input/mouse*"
+        Option "Ignore" "on"
+EndSection
+
+# This option enables the bottom right corner to be a right button on clickpads
+# and the right and middle top areas to be right / middle buttons on clickpads
+# with a top button area.
+# This option is only interpreted by clickpads.
+Section "InputClass"
+        Identifier "Default clickpad buttons"
+        MatchDriver "synaptics"
+        Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
+        Option "SecondarySoftButtonAreas" "58% 0 0 15% 42% 58% 0 15%"
+EndSection
+
+# This option disables software buttons on Apple touchpads.
+# This option is only interpreted by clickpads.
+Section "InputClass"
+        Identifier "Disable clickpad buttons on Apple touchpads"
+        MatchProduct "Apple|bcm5974"
+        MatchDriver "synaptics"
+        Option "SoftButtonAreas" "0 0 0 0 0 0 0 0"
+EndSection
diff --git a/conf/Makefile.am b/conf/Makefile.am
index 38d2a01..b883c10 100644
--- a/conf/Makefile.am
+++ b/conf/Makefile.am
@@ -20,7 +20,7 @@
 
 
 if HAS_XORG_CONF_DIR
-dist_config_DATA = 50-synaptics.conf
+dist_config_DATA = 70-synaptics.conf
 else
 fdidir = $(datadir)/hal/fdi/policy/20thirdparty
 dist_fdi_DATA = 11-x11-synaptics.fdi
diff --git a/man/synaptics.man b/man/synaptics.man
index 7083b3a..4f87b01 100644
--- a/man/synaptics.man
+++ b/man/synaptics.man
@@ -923,7 +923,7 @@ Configuration through
 .I InputClass
 sections is recommended in X servers 1.8 and later. See xorg.conf.d(5) for
 more details. An example xorg.conf.d snippet is provided in
-.I ${sourcecode}/conf/50-synaptics.conf
+.I ${sourcecode}/conf/70-synaptics.conf
 .LP
 Configuration through hal fdi files is recommended in X servers 1.5, 1.6 and
 1.7. An example hal policy file is provided in
-- 
2.6.6