[PATCH xf86-video-cirrus 1/3] Tab to spaces conversion for lg_driver.c
Kevin Brace
kevinbrace at gmx.com
Wed Apr 17 23:38:50 UTC 2019
Signed-off-by: Kevin Brace <kevinbrace at gmx.com>
---
src/lg_driver.c | 2712 +++++++++++++++++++++++------------------------
1 file changed, 1338 insertions(+), 1374 deletions(-)
diff --git a/src/lg_driver.c b/src/lg_driver.c
index 60280df..6bbbc15 100644
--- a/src/lg_driver.c
+++ b/src/lg_driver.c
@@ -9,9 +9,9 @@
*
* This driver is derived from the cir_driver.c module.
* Original authors and contributors list include:
- * Radoslaw Kapitan, Andrew Vanderstock, Dirk Hohndel,
- * David Dawes, Andrew E. Mileski, Leonard N. Zubkoff,
- * Guy DESBIEF, Itai Nahshon.
+ * Radoslaw Kapitan, Andrew Vanderstock, Dirk Hohndel,
+ * David Dawes, Andrew E. Mileski, Leonard N. Zubkoff,
+ * Guy DESBIEF, Itai Nahshon.
*/
#ifdef HAVE_CONFIG_H
@@ -75,8 +75,8 @@ Bool LgPreInit(ScrnInfoPtr pScrn, int flags);
Bool LgScreenInit(SCREEN_INIT_ARGS_DECL);
Bool LgEnterVT(VT_FUNC_ARGS_DECL);
void LgLeaveVT(VT_FUNC_ARGS_DECL);
-static Bool LgCloseScreen(CLOSE_SCREEN_ARGS_DECL);
-static Bool LgSaveScreen(ScreenPtr pScreen, Bool mode);
+static Bool LgCloseScreen(CLOSE_SCREEN_ARGS_DECL);
+static Bool LgSaveScreen(ScreenPtr pScreen, Bool mode);
/* Required if the driver supports mode switching */
Bool LgSwitchMode(SWITCH_MODE_ARGS_DECL);
@@ -86,7 +86,7 @@ void LgAdjustFrame(ADJUST_FRAME_ARGS_DECL);
/* Optional functions */
void LgFreeScreen(FREE_SCREEN_ARGS_DECL);
ModeStatus LgValidMode(SCRN_ARG_TYPE arg, DisplayModePtr mode,
- Bool verbose, int flags);
+ Bool verbose, int flags);
/* Internally used functions */
static void LgRestoreLgRegs(ScrnInfoPtr pScrn, LgRegPtr lgReg);
@@ -95,7 +95,7 @@ static CARD16 LgSetClock(CirPtr pCir, vgaHWPtr hwp, int freq);
static void lg_vgaHWSetMmioFunc(vgaHWPtr hwp, CARD8 *base);
static void LgDisplayPowerManagementSet(ScrnInfoPtr pScrn,
- int PowerManagementMode, int flags);
+ int PowerManagementMode, int flags);
/*
* This is intentionally screen-independent. It indicates the binding
@@ -112,51 +112,50 @@ static int pix24bpp = 0;
*/
typedef enum {
- OPTION_HW_CURSOR,
- OPTION_PCI_RETRY,
- OPTION_ROTATE,
- OPTION_SHADOW_FB,
- OPTION_NOACCEL
+ OPTION_HW_CURSOR,
+ OPTION_PCI_RETRY,
+ OPTION_ROTATE,
+ OPTION_SHADOW_FB,
+ OPTION_NOACCEL
} LgOpts;
static const OptionInfoRec LgOptions[] = {
- { OPTION_HW_CURSOR, "HWcursor", OPTV_BOOLEAN, {0}, FALSE },
- { OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE },
- { OPTION_SHADOW_FB, "ShadowFB", OPTV_BOOLEAN, {0}, FALSE },
- { OPTION_ROTATE, "Rotate", OPTV_ANYSTR, {0}, FALSE },
+ { OPTION_HW_CURSOR, "HWcursor", OPTV_BOOLEAN, {0}, FALSE },
+ { OPTION_NOACCEL, "NoAccel", OPTV_BOOLEAN, {0}, FALSE },
+ { OPTION_SHADOW_FB, "ShadowFB", OPTV_BOOLEAN, {0}, FALSE },
+ { OPTION_ROTATE, "Rotate", OPTV_ANYSTR, {0}, FALSE },
/* fifo_conservative/aggressive; fast/med/slow_dram; ... */
- { -1, NULL, OPTV_NONE, {0}, FALSE }
+ { -1, NULL, OPTV_NONE, {0}, FALSE }
};
-
/* 1/4bpp 8bpp 15/16bpp 24bpp 32bpp */
static int gd5462_MaxClocks[] = { 170000, 170000, 135100, 135100, 85500 };
static int gd5464_MaxClocks[] = { 170000, 250000, 170000, 170000, 135100 };
static int gd5465_MaxClocks[] = { 170000, 250000, 170000, 170000, 135100 };
LgLineDataRec LgLineData[] = {
- { 5, 640, 0}, /* We're rather use skinny tiles, so put all of */
- { 8, 1024, 0}, /* them at the head of the table */
- {10, 1280, 0},
- {13, 1664, 0},
- {16, 2048, 0},
- {20, 2560, 0},
- {10, 2560, 1},
- {26, 3328, 0},
- { 5, 1280, 1},
- { 8, 2048, 1},
- {13, 3328, 1},
- {16, 4096, 1},
- {20, 5120, 1},
- {26, 6656, 1},
- {-1, -1, -1} /* Sentinal to indicate end of table */
+ { 5, 640, 0}, /* We're rather use skinny tiles, so put all of */
+ { 8, 1024, 0}, /* them at the head of the table */
+ {10, 1280, 0},
+ {13, 1664, 0},
+ {16, 2048, 0},
+ {20, 2560, 0},
+ {10, 2560, 1},
+ {26, 3328, 0},
+ { 5, 1280, 1},
+ { 8, 2048, 1},
+ {13, 3328, 1},
+ {16, 4096, 1},
+ {20, 5120, 1},
+ {26, 6656, 1},
+ {-1, -1, -1} /* Sentinal to indicate end of table */
};
static int LgLinePitches[4][11] = {
- /* 8 */ { 640, 1024, 1280, 1664, 2048, 2560, 3328, 4096, 5120, 6656, 0 },
- /* 16 */ { 320, 512, 640, 832, 1024, 1280, 1664, 2048, 2560, 3328, 0 },
- /* 24 */ { 213, 341, 426, 554, 682, 853, 1109, 1365, 1706, 2218, 0 },
- /* 32 */ { 160, 256, 320, 416, 512, 640, 832, 1024, 1280, 1664, 0 }
+ /* 8 */ { 640, 1024, 1280, 1664, 2048, 2560, 3328, 4096, 5120, 6656, 0 },
+ /* 16 */ { 320, 512, 640, 832, 1024, 1280, 1664, 2048, 2560, 3328, 0 },
+ /* 24 */ { 213, 341, 426, 554, 682, 853, 1109, 1365, 1706, 2218, 0 },
+ /* 32 */ { 160, 256, 320, 416, 512, 640, 832, 1024, 1280, 1664, 0 }
};
#ifdef XFree86LOADER
@@ -167,16 +166,16 @@ static int LgLinePitches[4][11] = {
static XF86ModuleVersionInfo lgVersRec =
{
- "cirrus_laguna",
- MODULEVENDORSTRING,
- MODINFOSTRING1,
- MODINFOSTRING2,
- XORG_VERSION_CURRENT,
- LG_MAJOR_VERSION, LG_MINOR_VERSION, LG_PATCHLEVEL,
- ABI_CLASS_VIDEODRV, /* This is a video driver */
- ABI_VIDEODRV_VERSION,
- MOD_CLASS_NONE,
- {0,0,0,0}
+ "cirrus_laguna",
+ MODULEVENDORSTRING,
+ MODINFOSTRING1,
+ MODINFOSTRING2,
+ XORG_VERSION_CURRENT,
+ LG_MAJOR_VERSION, LG_MINOR_VERSION, LG_PATCHLEVEL,
+ ABI_CLASS_VIDEODRV, /* This is a video driver */
+ ABI_VIDEODRV_VERSION,
+ MOD_CLASS_NONE,
+ {0,0,0,0}
};
/*
@@ -192,59 +191,49 @@ _X_EXPORT XF86ModuleData cirrus_lagunaModuleData = {
#endif /* XFree86LOADER */
_X_EXPORT const OptionInfoRec *
-LgAvailableOptions(int chipid)
-{
+LgAvailableOptions(int chipid) {
return LgOptions;
}
-_X_EXPORT ScrnInfoPtr
-LgProbe(int entity)
-{
+_X_EXPORT ScrnInfoPtr LgProbe(int entity) {
ScrnInfoPtr pScrn = NULL;
if ((pScrn = xf86ConfigPciEntity(pScrn, 0, entity, CIRPciChipsets,
- NULL, NULL, NULL, NULL, NULL))) {
- pScrn->PreInit = LgPreInit;
- pScrn->ScreenInit = LgScreenInit;
- pScrn->SwitchMode = LgSwitchMode;
- pScrn->AdjustFrame = LgAdjustFrame;
- pScrn->EnterVT = LgEnterVT;
- pScrn->LeaveVT = LgLeaveVT;
- pScrn->FreeScreen = LgFreeScreen;
- pScrn->ValidMode = LgValidMode;
+ NULL, NULL, NULL, NULL, NULL))) {
+ pScrn->PreInit = LgPreInit;
+ pScrn->ScreenInit = LgScreenInit;
+ pScrn->SwitchMode = LgSwitchMode;
+ pScrn->AdjustFrame = LgAdjustFrame;
+ pScrn->EnterVT = LgEnterVT;
+ pScrn->LeaveVT = LgLeaveVT;
+ pScrn->FreeScreen = LgFreeScreen;
+ pScrn->ValidMode = LgValidMode;
}
return pScrn;
}
+static Bool LgGetRec(ScrnInfoPtr pScrn) {
+ CirPtr pCir;
-static Bool
-LgGetRec(ScrnInfoPtr pScrn)
-{
- CirPtr pCir;
-
- if (pScrn->driverPrivate != NULL)
- return TRUE;
+ if (pScrn->driverPrivate != NULL)
+ return TRUE;
- pScrn->driverPrivate = xnfcalloc(sizeof(CirRec), 1);
- ((CirPtr)pScrn->driverPrivate)->chip.lg = xnfcalloc(sizeof(LgRec),1);
+ pScrn->driverPrivate = xnfcalloc(sizeof(CirRec), 1);
+ ((CirPtr) pScrn->driverPrivate)->chip.lg = xnfcalloc(sizeof(LgRec), 1);
- /* Initialize it */
- pCir = CIRPTR(pScrn);
- pCir->chip.lg->oldBitmask = 0x00000000;
+ /* Initialize it */
+ pCir = CIRPTR(pScrn);
+ pCir->chip.lg->oldBitmask = 0x00000000;
- return TRUE;
+ return TRUE;
}
-static void
-LgFreeRec(ScrnInfoPtr pScrn)
-{
- if (pScrn->driverPrivate == NULL)
- return;
- free(pScrn->driverPrivate);
- pScrn->driverPrivate = NULL;
+static void LgFreeRec(ScrnInfoPtr pScrn) {
+ if (pScrn->driverPrivate == NULL)
+ return;
+ free(pScrn->driverPrivate);
+ pScrn->driverPrivate = NULL;
}
-
-
/*
* LgCountRAM --
*
@@ -252,613 +241,614 @@ LgFreeRec(ScrnInfoPtr pScrn)
*/
/* XXX We need to get rid of this PIO (MArk) */
-static int
-LgCountRam(ScrnInfoPtr pScrn)
-{
- vgaHWPtr hwp = VGAHWPTR(pScrn);
- CARD8 SR14;
+static int LgCountRam(ScrnInfoPtr pScrn) {
+ vgaHWPtr hwp = VGAHWPTR(pScrn);
+ CARD8 SR14;
- vgaHWProtect(pScrn, TRUE);
+ vgaHWProtect(pScrn, TRUE);
- /* The ROM BIOS scratchpad registers contain,
- among other things, the amount of installed
- RDRAM on the laguna chip. */
- SR14 = hwp->readSeq(hwp, 0x14);
+ /* The ROM BIOS scratchpad registers contain,
+ among other things, the amount of installed
+ RDRAM on the laguna chip. */
+ SR14 = hwp->readSeq(hwp, 0x14);
- ErrorF("Scratch Pads: 0:%02x 1:%02x 2:%02x 3:%02x\n",
- hwp->readSeq(hwp, 9), hwp->readSeq(hwp, 10),
- SR14, hwp->readSeq(hwp, 0x15));
+ ErrorF("Scratch Pads: 0:%02x 1:%02x 2:%02x 3:%02x\n", hwp->readSeq(hwp, 9),
+ hwp->readSeq(hwp, 10), SR14, hwp->readSeq(hwp, 0x15));
- vgaHWProtect(pScrn, FALSE);
+ vgaHWProtect(pScrn, FALSE);
- return 1024 * ((SR14&0x7) + 1);
+ return 1024 * ((SR14 & 0x7) + 1);
- /* !!! This function seems to be incorrect... */
+ /* !!! This function seems to be incorrect... */
}
-static xf86MonPtr
-LgDoDDC(ScrnInfoPtr pScrn)
-{
- CirPtr pCir = CIRPTR(pScrn);
- xf86MonPtr MonInfo = NULL;
+static xf86MonPtr LgDoDDC(ScrnInfoPtr pScrn) {
+ CirPtr pCir = CIRPTR(pScrn);
+ xf86MonPtr MonInfo = NULL;
- /* Map the CIR memory and MMIO areas */
- if (!CirMapMem(pCir, pScrn->scrnIndex))
- return FALSE;
+ /* Map the CIR memory and MMIO areas */
+ if (!CirMapMem(pCir, pScrn->scrnIndex))
+ return FALSE;
#if LGuseI2C
- if (!LgI2CInit(pScrn)) {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "I2C initialization failed\n");
-
- goto unmap_out;
- }
-
- /* Read and output monitor info using DDC2 over I2C bus */
- MonInfo = xf86DoEDID_DDC2(pScrn->scrnIndex, pCir->I2CPtr1);
- xf86DrvMsg(pScrn->scrnIndex, X_INFO, "I2C Monitor info: %p\n",
- (void *)MonInfo);
- xf86PrintEDID(MonInfo);
- xf86DrvMsg(pScrn->scrnIndex, X_INFO, "end of I2C Monitor info\n\n");
+ if (!LgI2CInit(pScrn)) {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "I2C initialization failed\n");
+
+ goto unmap_out;
+ }
+
+ /* Read and output monitor info using DDC2 over I2C bus */
+ MonInfo = xf86DoEDID_DDC2(pScrn->scrnIndex, pCir->I2CPtr1);
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "I2C Monitor info: %p\n",
+ (void *)MonInfo);
+ xf86PrintEDID(MonInfo);
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "end of I2C Monitor info\n\n");
#endif /* LGuseI2C */
- xf86SetDDCproperties(pScrn, MonInfo);
+ xf86SetDDCproperties(pScrn, MonInfo);
#if LGuseI2C
-unmap_out:
+ unmap_out:
#endif /* LGuseI2C */
- CirUnmapMem(pCir, pScrn->scrnIndex);
+ CirUnmapMem(pCir, pScrn->scrnIndex);
- return MonInfo;
+ return MonInfo;
}
/* Mandatory */
-Bool
-LgPreInit(ScrnInfoPtr pScrn, int flags)
-{
- CirPtr pCir;
- vgaHWPtr hwp;
- MessageType from;
- int i;
- ClockRangePtr clockRanges;
- int fbPCIReg, ioPCIReg;
- const char *s;
-
- if (flags & PROBE_DETECT) {
- cirProbeDDC( pScrn, xf86GetEntityInfo(pScrn->entityList[0])->index );
- return TRUE;
- }
-
+Bool LgPreInit(ScrnInfoPtr pScrn, int flags) {
+ CirPtr pCir;
+ vgaHWPtr hwp;
+ MessageType from;
+ int i;
+ ClockRangePtr clockRanges;
+ int fbPCIReg, ioPCIReg;
+ const char *s;
+
+ if (flags & PROBE_DETECT) {
+ cirProbeDDC(pScrn, xf86GetEntityInfo(pScrn->entityList[0])->index);
+ return TRUE;
+ }
+
#ifdef LG_DEBUG
- ErrorF("LgPreInit\n");
+ ErrorF("LgPreInit\n");
#endif
- /* Check the number of entities, and fail if it isn't one. */
- if (pScrn->numEntities != 1)
- return FALSE;
+ /* Check the number of entities, and fail if it isn't one. */
+ if (pScrn->numEntities != 1)
+ return FALSE;
- /* The vgahw module should be loaded here when needed */
- if (!xf86LoadSubModule(pScrn, "vgahw"))
- return FALSE;
+ /* The vgahw module should be loaded here when needed */
+ if (!xf86LoadSubModule(pScrn, "vgahw"))
+ return FALSE;
- /*
- * Allocate a vgaHWRec
- */
- if (!vgaHWGetHWRec(pScrn))
- return FALSE;
+ /*
+ * Allocate a vgaHWRec
+ */
+ if (!vgaHWGetHWRec(pScrn))
+ return FALSE;
- hwp = VGAHWPTR(pScrn);
- vgaHWSetStdFuncs(hwp);
- vgaHWGetIOBase(hwp);
+ hwp = VGAHWPTR(pScrn);
+ vgaHWSetStdFuncs(hwp);
+ vgaHWGetIOBase(hwp);
- /* Allocate the LgRec driverPrivate */
- if (!LgGetRec(pScrn))
- return FALSE;
+ /* Allocate the LgRec driverPrivate */
+ if (!LgGetRec(pScrn))
+ return FALSE;
- pCir = CIRPTR(pScrn);
- pCir->pScrn = pScrn;
+ pCir = CIRPTR(pScrn);
+ pCir->pScrn = pScrn;
#if GET_ABI_MAJOR(ABI_VIDEODRV_VERSION) < 12
- pCir->PIOReg = hwp->PIOOffset + 0x3CE;
+ pCir->PIOReg = hwp->PIOOffset + 0x3CE;
#else
- pCir->PIOReg = 0x3CE;
+ pCir->PIOReg = 0x3CE;
#endif
- /* Get the entity, and make sure it is PCI. */
- pCir->pEnt = xf86GetEntityInfo(pScrn->entityList[0]);
- if (pCir->pEnt->location.type != BUS_PCI)
- return FALSE;
- pCir->Chipset = pCir->pEnt->chipset;
+ /* Get the entity, and make sure it is PCI. */
+ pCir->pEnt = xf86GetEntityInfo(pScrn->entityList[0]);
+ if (pCir->pEnt->location.type != BUS_PCI)
+ return FALSE;
+ pCir->Chipset = pCir->pEnt->chipset;
- /* Find the PCI info for this screen */
- pCir->PciInfo = xf86GetPciInfoForEntity(pCir->pEnt->index);
+ /* Find the PCI info for this screen */
+ pCir->PciInfo = xf86GetPciInfoForEntity(pCir->pEnt->index);
#ifndef XSERVER_LIBPCIACCESS
- pCir->PciTag = pciTag(PCI_DEV_BUS(pCir->PciInfo),
- PCI_DEV_DEV(pCir->PciInfo),
- PCI_DEV_FUNC(pCir->PciInfo));
+ pCir->PciTag = pciTag(PCI_DEV_BUS(pCir->PciInfo),
+ PCI_DEV_DEV(pCir->PciInfo), PCI_DEV_FUNC(pCir->PciInfo));
#endif
- if (xf86LoadSubModule(pScrn, "int10")) {
- xf86Int10InfoPtr int10InfoPtr;
-
- int10InfoPtr = xf86InitInt10(pCir->pEnt->index);
-
- if (int10InfoPtr)
- xf86FreeInt10(int10InfoPtr);
- }
-
- /* Set pScrn->monitor */
- pScrn->monitor = pScrn->confScreen->monitor;
-
- /*
- * The first thing we should figure out is the depth, bpp, etc.
- * We support both 24bpp and 32bpp layouts, so indicate that.
- */
- if (!xf86SetDepthBpp(pScrn, 0, 0, 0, Support24bppFb | Support32bppFb |
- SupportConvert32to24 | PreferConvert32to24)) {
- return FALSE;
+ if (xf86LoadSubModule(pScrn, "int10")) {
+ xf86Int10InfoPtr int10InfoPtr;
+
+ int10InfoPtr = xf86InitInt10(pCir->pEnt->index);
+
+ if (int10InfoPtr)
+ xf86FreeInt10(int10InfoPtr);
}
- /* Check that the returned depth is one we support */
- switch (pScrn->depth) {
- case 8:
- case 15:
- case 16:
- case 24:
- case 32:
- /* OK */
- break;
- default:
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "Given depth (%d) is not supported by this driver\n", pScrn->depth);
- return FALSE;
- }
- xf86PrintDepthBpp(pScrn);
-
- /* Get the depth24 pixmap format */
- if (pScrn->depth == 24 && pix24bpp == 0)
- pix24bpp = xf86GetBppFromDepth(pScrn, 24);
-
- /*
- * This must happen after pScrn->display has been set because
- * xf86SetWeight references it.
- */
- if (pScrn->depth > 8) {
- /* The defaults are OK for us */
- rgb zeros = {0, 0, 0};
-
- /* !!! I think we can force 5-6-5 weight for 16bpp here for
- the 5462. */
-
- if (!xf86SetWeight(pScrn, zeros, zeros)) {
- return FALSE;
- } else {
- /* XXX check that weight returned is supported */
- ;
- }
- }
-
- if (!xf86SetDefaultVisual(pScrn, -1))
- return FALSE;
-
-
- /* Collect all of the relevant option flags (fill in pScrn->options) */
- xf86CollectOptions(pScrn, NULL);
-
- /* Process the options */
- if (!(pCir->Options = malloc(sizeof(LgOptions))))
- return FALSE;
- memcpy(pCir->Options, LgOptions, sizeof(LgOptions));
- xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, pCir->Options);
-
- pScrn->rgbBits = 6;
- from = X_DEFAULT;
- pCir->HWCursor = FALSE;
- if (xf86GetOptValBool(pCir->Options, OPTION_HW_CURSOR, &pCir->HWCursor))
- from = X_CONFIG;
-
- xf86DrvMsg(pScrn->scrnIndex, from, "Using %s cursor\n",
- pCir->HWCursor ? "HW" : "SW");
- if (xf86ReturnOptValBool(pCir->Options, OPTION_NOACCEL, FALSE)) {
- pCir->NoAccel = TRUE;
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Acceleration disabled\n");
- }
- if (pScrn->bitsPerPixel < 8) {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "Cannot use in less than 8 bpp\n");
- return FALSE;
- }
- /*
- * Set the ChipRev, allowing config file entries to
- * override.
- */
- if (pCir->pEnt->device->chipRev >= 0) {
- pCir->ChipRev = pCir->pEnt->device->chipRev;
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipRev override: %d\n",
- pCir->ChipRev);
- } else {
- pCir->ChipRev = PCI_DEV_REVISION(pCir->PciInfo);
- }
-
- /* Cirrus swapped the FB and IO registers in the 5465 (by design). */
- if (PCI_CHIP_GD5465 == pCir->Chipset) {
- fbPCIReg = 0;
- ioPCIReg = 1;
- } else {
- fbPCIReg = 1;
- ioPCIReg = 0;
- }
-
- /* Find the frame buffer base address */
- if (pCir->pEnt->device->MemBase != 0) {
- /* Require that the config file value matches one of the PCI values. */
- if (!xf86CheckPciMemBase(pCir->PciInfo, pCir->pEnt->device->MemBase)) {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "MemBase 0x%08lX doesn't match any PCI base register.\n",
- pCir->pEnt->device->MemBase);
- return FALSE;
- }
- pCir->FbAddress = pCir->pEnt->device->MemBase;
- from = X_CONFIG;
- } else {
- if (PCI_REGION_BASE(pCir->PciInfo, fbPCIReg, REGION_MEM) != 0) {
- pCir->FbAddress = PCI_REGION_BASE(pCir->PciInfo, fbPCIReg, REGION_MEM) & 0xff000000;
- from = X_PROBED;
- } else {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "No valid FB address in PCI config space\n");
- LgFreeRec(pScrn);
- return FALSE;
- }
- }
- xf86DrvMsg(pScrn->scrnIndex, from, "Linear framebuffer at 0x%lX\n",
- (unsigned long)pCir->FbAddress);
-
- /* Find the MMIO base address */
- if (pCir->pEnt->device->IOBase != 0) {
- /* Require that the config file value matches one of the PCI values. */
- if (!xf86CheckPciMemBase(pCir->PciInfo, pCir->pEnt->device->IOBase)) {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "IOBase 0x%08lX doesn't match any PCI base register.\n",
- pCir->pEnt->device->IOBase);
- return FALSE;
- }
- pCir->IOAddress = pCir->pEnt->device->IOBase;
- from = X_CONFIG;
- } else {
- if (PCI_REGION_BASE(pCir->PciInfo, ioPCIReg, REGION_MEM) != 0) {
- pCir->IOAddress = PCI_REGION_BASE(pCir->PciInfo, ioPCIReg, REGION_MEM) & 0xfffff000;
- from = X_PROBED;
- } else {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "No valid MMIO address in PCI config space\n");
- }
- }
- xf86DrvMsg(pScrn->scrnIndex, from, "MMIO registers at 0x%lX\n",
- (unsigned long)pCir->IOAddress);
-
- /*
- * If the user has specified the amount of memory in the XF86Config
- * file, we respect that setting.
- */
- if (pCir->pEnt->device->videoRam != 0) {
- pScrn->videoRam = pCir->pEnt->device->videoRam;
- from = X_CONFIG;
- } else {
- pScrn->videoRam = LgCountRam(pScrn);
- from = X_PROBED;
- }
- if (2048 == pScrn->videoRam) {
- /* Two-way interleaving */
- pCir->chip.lg->memInterleave = 0x40;
- } else if (4096 == pScrn->videoRam || 8192 == pScrn->videoRam) {
- /* Four-way interleaving */
- pCir->chip.lg->memInterleave = 0x80;
- } else {
- /* One-way interleaving */
- pCir->chip.lg->memInterleave = 0x00;
- }
-
- xf86DrvMsg(pScrn->scrnIndex, from, "VideoRAM: %d kByte\n",
- pScrn->videoRam);
-
- pCir->FbMapSize = pScrn->videoRam * 1024;
- pCir->IoMapSize = 0x4000; /* 16K for moment, will increase */
+
+ /* Set pScrn->monitor */
+ pScrn->monitor = pScrn->confScreen->monitor;
+
+ /*
+ * The first thing we should figure out is the depth, bpp, etc.
+ * We support both 24bpp and 32bpp layouts, so indicate that.
+ */
+ if (!xf86SetDepthBpp(pScrn, 0, 0, 0, Support24bppFb | Support32bppFb |
+ SupportConvert32to24 | PreferConvert32to24)) {
+ return FALSE;
+ }
+ /* Check that the returned depth is one we support */
+ switch (pScrn->depth) {
+ case 8:
+ case 15:
+ case 16:
+ case 24:
+ case 32:
+ /* OK */
+ break;
+ default:
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "Given depth (%d) is not supported by this driver\n",
+ pScrn->depth);
+ return FALSE;
+ }
+ xf86PrintDepthBpp(pScrn);
+
+ /* Get the depth24 pixmap format */
+ if (pScrn->depth == 24 && pix24bpp == 0)
+ pix24bpp = xf86GetBppFromDepth(pScrn, 24);
+
+ /*
+ * This must happen after pScrn->display has been set because
+ * xf86SetWeight references it.
+ */
+ if (pScrn->depth > 8) {
+ /* The defaults are OK for us */
+ rgb zeros = { 0, 0, 0 };
+
+ /* !!! I think we can force 5-6-5 weight for 16bpp here for
+ the 5462. */
+
+ if (!xf86SetWeight(pScrn, zeros, zeros)) {
+ return FALSE;
+ } else {
+ /* XXX check that weight returned is supported */
+ ;
+ }
+ }
+
+ if (!xf86SetDefaultVisual(pScrn, -1))
+ return FALSE;
+
+ /* Collect all of the relevant option flags (fill in pScrn->options) */
+ xf86CollectOptions(pScrn, NULL);
+
+ /* Process the options */
+ if (!(pCir->Options = malloc(sizeof(LgOptions))))
+ return FALSE;
+ memcpy(pCir->Options, LgOptions, sizeof(LgOptions));
+ xf86ProcessOptions(pScrn->scrnIndex, pScrn->options, pCir->Options);
+
+ pScrn->rgbBits = 6;
+ from = X_DEFAULT;
+ pCir->HWCursor = FALSE;
+ if (xf86GetOptValBool(pCir->Options, OPTION_HW_CURSOR, &pCir->HWCursor))
+ from = X_CONFIG;
+
+ xf86DrvMsg(pScrn->scrnIndex, from, "Using %s cursor\n",
+ pCir->HWCursor ? "HW" : "SW");
+ if (xf86ReturnOptValBool(pCir->Options, OPTION_NOACCEL, FALSE)) {
+ pCir->NoAccel = TRUE;
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Acceleration disabled\n");
+ }
+ if (pScrn->bitsPerPixel < 8) {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "Cannot use in less than 8 bpp\n");
+ return FALSE;
+ }
+ /*
+ * Set the ChipRev, allowing config file entries to
+ * override.
+ */
+ if (pCir->pEnt->device->chipRev >= 0) {
+ pCir->ChipRev = pCir->pEnt->device->chipRev;
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ChipRev override: %d\n",
+ pCir->ChipRev);
+ } else {
+ pCir->ChipRev = PCI_DEV_REVISION(pCir->PciInfo);
+ }
+
+ /* Cirrus swapped the FB and IO registers in the 5465 (by design). */
+ if (PCI_CHIP_GD5465 == pCir->Chipset) {
+ fbPCIReg = 0;
+ ioPCIReg = 1;
+ } else {
+ fbPCIReg = 1;
+ ioPCIReg = 0;
+ }
+
+ /* Find the frame buffer base address */
+ if (pCir->pEnt->device->MemBase != 0) {
+ /* Require that the config file value matches one of the PCI values. */
+ if (!xf86CheckPciMemBase(pCir->PciInfo, pCir->pEnt->device->MemBase)) {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "MemBase 0x%08lX doesn't match any PCI base register.\n",
+ pCir->pEnt->device->MemBase);
+ return FALSE;
+ }
+ pCir->FbAddress = pCir->pEnt->device->MemBase;
+ from = X_CONFIG;
+ } else {
+ if (PCI_REGION_BASE(pCir->PciInfo, fbPCIReg, REGION_MEM) != 0) {
+ pCir->FbAddress =
+ PCI_REGION_BASE(pCir->PciInfo, fbPCIReg, REGION_MEM)
+ & 0xff000000;
+ from = X_PROBED;
+ } else {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "No valid FB address in PCI config space\n");
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
+ }
+ xf86DrvMsg(pScrn->scrnIndex, from, "Linear framebuffer at 0x%lX\n",
+ (unsigned long) pCir->FbAddress);
+
+ /* Find the MMIO base address */
+ if (pCir->pEnt->device->IOBase != 0) {
+ /* Require that the config file value matches one of the PCI values. */
+ if (!xf86CheckPciMemBase(pCir->PciInfo, pCir->pEnt->device->IOBase)) {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "IOBase 0x%08lX doesn't match any PCI base register.\n",
+ pCir->pEnt->device->IOBase);
+ return FALSE;
+ }
+ pCir->IOAddress = pCir->pEnt->device->IOBase;
+ from = X_CONFIG;
+ } else {
+ if (PCI_REGION_BASE(pCir->PciInfo, ioPCIReg, REGION_MEM) != 0) {
+ pCir->IOAddress =
+ PCI_REGION_BASE(pCir->PciInfo, ioPCIReg, REGION_MEM)
+ & 0xfffff000;
+ from = X_PROBED;
+ } else {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "No valid MMIO address in PCI config space\n");
+ }
+ }
+ xf86DrvMsg(pScrn->scrnIndex, from, "MMIO registers at 0x%lX\n",
+ (unsigned long) pCir->IOAddress);
+
+ /*
+ * If the user has specified the amount of memory in the XF86Config
+ * file, we respect that setting.
+ */
+ if (pCir->pEnt->device->videoRam != 0) {
+ pScrn->videoRam = pCir->pEnt->device->videoRam;
+ from = X_CONFIG;
+ } else {
+ pScrn->videoRam = LgCountRam(pScrn);
+ from = X_PROBED;
+ }
+ if (2048 == pScrn->videoRam) {
+ /* Two-way interleaving */
+ pCir->chip.lg->memInterleave = 0x40;
+ } else if (4096 == pScrn->videoRam || 8192 == pScrn->videoRam) {
+ /* Four-way interleaving */
+ pCir->chip.lg->memInterleave = 0x80;
+ } else {
+ /* One-way interleaving */
+ pCir->chip.lg->memInterleave = 0x00;
+ }
+
+ xf86DrvMsg(pScrn->scrnIndex, from, "VideoRAM: %d kByte\n", pScrn->videoRam);
+
+ pCir->FbMapSize = pScrn->videoRam * 1024;
+ pCir->IoMapSize = 0x4000; /* 16K for moment, will increase */
#ifndef XSERVER_LIBPCIACCESS
- pScrn->racIoFlags = RAC_COLORMAP
+ pScrn->racIoFlags = RAC_COLORMAP
#ifndef EXPERIMENTAL
- | RAC_VIEWPORT
+ | RAC_VIEWPORT
#endif
-;
- xf86SetOperatingState(resVgaMem, pCir->pEnt->index, ResUnusedOpr);
-
- /* Register the PCI-assigned resources. */
- if (xf86RegisterResources(pCir->pEnt->index, NULL, ResExclusive)) {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "xf86RegisterResources() found resource conflicts\n");
- return FALSE;
- }
+ ;
+ xf86SetOperatingState(resVgaMem, pCir->pEnt->index, ResUnusedOpr);
+
+ /* Register the PCI-assigned resources. */
+ if (xf86RegisterResources(pCir->pEnt->index, NULL, ResExclusive)) {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "xf86RegisterResources() found resource conflicts\n");
+ return FALSE;
+ }
#endif
- if (!xf86LoadSubModule(pScrn, "ddc")) {
- LgFreeRec(pScrn);
- return FALSE;
- }
+ if (!xf86LoadSubModule(pScrn, "ddc")) {
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
#if LGuseI2C
- if (!xf86LoadSubModule(pScrn, "i2c")) {
- LgFreeRec(pScrn);
- return FALSE;
- }
+ if (!xf86LoadSubModule(pScrn, "i2c")) {
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
#endif
- /* Read and print the monitor DDC information */
- pScrn->monitor->DDC = LgDoDDC(pScrn);
-
- /* The gamma fields must be initialised when using the new cmap code */
- if (pScrn->depth > 1) {
- Gamma zeros = {0.0, 0.0, 0.0};
-
- if (!xf86SetGamma(pScrn, zeros))
- return FALSE;
- }
- if (xf86GetOptValBool(pCir->Options,
- OPTION_SHADOW_FB,&pCir->shadowFB))
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ShadowFB %s.\n",
- pCir->shadowFB ? "enabled" : "disabled");
-
- if ((s = xf86GetOptValString(pCir->Options, OPTION_ROTATE))) {
- if(!xf86NameCmp(s, "CW")) {
- /* accel is disabled below for shadowFB */
- pCir->shadowFB = TRUE;
- pCir->rotate = 1;
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
- "Rotating screen clockwise - acceleration disabled\n");
- } else if(!xf86NameCmp(s, "CCW")) {
- pCir->shadowFB = TRUE;
- pCir->rotate = -1;
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Rotating screen"
- "counter clockwise - acceleration disabled\n");
- } else {
- xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "\"%s\" is not a valid"
- "value for Option \"Rotate\"\n", s);
- xf86DrvMsg(pScrn->scrnIndex, X_INFO,
- "Valid options are \"CW\" or \"CCW\"\n");
- }
- }
-
- if (pCir->shadowFB && !pCir->NoAccel) {
- xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
- "HW acceleration not supported with \"shadowFB\".\n");
- pCir->NoAccel = TRUE;
- }
-
- if (pCir->rotate && pCir->HWCursor) {
- xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
- "HW cursor not supported with \"rotate\".\n");
- pCir->HWCursor = FALSE;
- }
-
- /* We use a programmable clock */
- pScrn->progClock = TRUE;
-
- /* XXX Set HW cursor use */
-
- /* Set the min pixel clock */
- pCir->MinClock = 12000; /* XXX Guess, need to check this */
- xf86DrvMsg(pScrn->scrnIndex, X_DEFAULT, "Min pixel clock is %d MHz\n",
- pCir->MinClock / 1000);
- /*
- * If the user has specified ramdac speed in the XF86Config
- * file, we respect that setting.
- */
- if (pCir->pEnt->device->dacSpeeds[0]) {
- ErrorF("Do not specify a Clocks line for Cirrus chips\n");
- return FALSE;
- } else {
- int speed;
- int *p;
- switch (pCir->Chipset) {
- case PCI_CHIP_GD5462:
- p = gd5462_MaxClocks;
- break;
- case PCI_CHIP_GD5464:
- case PCI_CHIP_GD5464BD:
- p = gd5464_MaxClocks;
- break;
- case PCI_CHIP_GD5465:
- p = gd5465_MaxClocks;
- break;
- default:
- ErrorF("???\n");
- return FALSE;
- }
- switch (pScrn->bitsPerPixel) {
- case 8:
- speed = p[1];
- break;
- case 15:
- case 16:
- speed = p[2];
- break;
- case 24:
- speed = p[3];
- break;
- case 32:
- speed = p[4];
- break;
- default:
- /* Should not get here */
- speed = 0;
- break;
- }
- pCir->MaxClock = speed;
- from = X_PROBED;
- }
- xf86DrvMsg(pScrn->scrnIndex, from, "Max pixel clock is %d MHz\n",
- pCir->MaxClock / 1000);
-
- /*
- * Setup the ClockRanges, which describe what clock ranges are available,
- * and what sort of modes they can be used for.
- */
- clockRanges = xnfcalloc(sizeof(ClockRange), 1);
- clockRanges->next = NULL;
- clockRanges->minClock = pCir->MinClock;
- clockRanges->maxClock = pCir->MaxClock;
- clockRanges->clockIndex = -1; /* programmable */
- clockRanges->interlaceAllowed = FALSE; /* XXX check this */
- clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
- clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
- clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
- clockRanges->ClockMulFactor = 1;
- clockRanges->ClockDivFactor = 1;
- clockRanges->PrivFlags = 0;
-
- /* Depending upon what sized tiles used, either 128 or 256. */
- /* Aw, heck. Just say 128. */
- pCir->Rounding = 128 >> pCir->BppShift;
-
- /*
- * xf86ValidateModes will check that the mode HTotal and VTotal values
- * don't exceed the chipset's limit if pScrn->maxHValue and
- * pScrn->maxVValue are set. Since our CIRValidMode() already takes
- * care of this, we don't worry about setting them here.
- */
-
- i = xf86ValidateModes(pScrn, pScrn->monitor->Modes, pScrn->display->modes,
- clockRanges,
- LgLinePitches[pScrn->bitsPerPixel / 8 - 1],
- 0, 0, 128 * 8,
- 0, 0, /* Any virtual height is allowed. */
- pScrn->display->virtualX,
- pScrn->display->virtualY,
- pCir->FbMapSize,
- LOOKUP_BEST_REFRESH);
-
- pCir->chip.lg->lineDataIndex = LgFindLineData(pScrn->displayWidth,
- pScrn->bitsPerPixel);
-
- if (i == -1) {
- LgFreeRec(pScrn);
- return FALSE;
- }
-
- /* Prune the modes marked as invalid */
- xf86PruneDriverModes(pScrn);
-
- if (i == 0 || pScrn->modes == NULL) {
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes found\n");
- LgFreeRec(pScrn);
- return FALSE;
- }
-
- /*
- * Set the CRTC parameters for all of the modes based on the type
- * of mode, and the chipset's interlace requirements.
- *
- * Calling this is required if the mode->Crtc* values are used by the
- * driver and if the driver doesn't provide code to set them. They
- * are not pre-initialised at all.
- */
- xf86SetCrtcForModes(pScrn, INTERLACE_HALVE_V);
-
- /* Set the current mode to the first in the list */
- pScrn->currentMode = pScrn->modes;
-
- /* Print the list of modes being used */
- xf86PrintModes(pScrn);
-
- /* Set display resolution */
- xf86SetDpi(pScrn, 0, 0);
-
- /* Load bpp-specific modules */
- switch (pScrn->bitsPerPixel) {
- case 8:
- case 16:
- case 24:
- case 32:
- if (xf86LoadSubModule(pScrn, "fb") == NULL) {
- LgFreeRec(pScrn);
- return FALSE;
- }
- break;
- }
-
- /* Load XAA if needed */
- if (!pCir->NoAccel) {
+ /* Read and print the monitor DDC information */
+ pScrn->monitor->DDC = LgDoDDC(pScrn);
+
+ /* The gamma fields must be initialised when using the new cmap code */
+ if (pScrn->depth > 1) {
+ Gamma zeros = { 0.0, 0.0, 0.0 };
+
+ if (!xf86SetGamma(pScrn, zeros))
+ return FALSE;
+ }
+ if (xf86GetOptValBool(pCir->Options, OPTION_SHADOW_FB, &pCir->shadowFB))
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "ShadowFB %s.\n",
+ pCir->shadowFB ? "enabled" : "disabled");
+
+ if ((s = xf86GetOptValString(pCir->Options, OPTION_ROTATE))) {
+ if (!xf86NameCmp(s, "CW")) {
+ /* accel is disabled below for shadowFB */
+ pCir->shadowFB = TRUE;
+ pCir->rotate = 1;
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG,
+ "Rotating screen clockwise - acceleration disabled\n");
+ } else if (!xf86NameCmp(s, "CCW")) {
+ pCir->shadowFB = TRUE;
+ pCir->rotate = -1;
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "Rotating screen"
+ "counter clockwise - acceleration disabled\n");
+ } else {
+ xf86DrvMsg(pScrn->scrnIndex, X_CONFIG, "\"%s\" is not a valid"
+ "value for Option \"Rotate\"\n", s);
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO,
+ "Valid options are \"CW\" or \"CCW\"\n");
+ }
+ }
+
+ if (pCir->shadowFB && !pCir->NoAccel) {
+ xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
+ "HW acceleration not supported with \"shadowFB\".\n");
+ pCir->NoAccel = TRUE;
+ }
+
+ if (pCir->rotate && pCir->HWCursor) {
+ xf86DrvMsg(pScrn->scrnIndex, X_WARNING,
+ "HW cursor not supported with \"rotate\".\n");
+ pCir->HWCursor = FALSE;
+ }
+
+ /* We use a programmable clock */
+ pScrn->progClock = TRUE;
+
+ /* XXX Set HW cursor use */
+
+ /* Set the min pixel clock */
+ pCir->MinClock = 12000; /* XXX Guess, need to check this */
+ xf86DrvMsg(pScrn->scrnIndex, X_DEFAULT, "Min pixel clock is %d MHz\n",
+ pCir->MinClock / 1000);
+ /*
+ * If the user has specified ramdac speed in the XF86Config
+ * file, we respect that setting.
+ */
+ if (pCir->pEnt->device->dacSpeeds[0]) {
+ ErrorF("Do not specify a Clocks line for Cirrus chips\n");
+ return FALSE;
+ } else {
+ int speed;
+ int *p;
+ switch (pCir->Chipset) {
+ case PCI_CHIP_GD5462:
+ p = gd5462_MaxClocks;
+ break;
+ case PCI_CHIP_GD5464:
+ case PCI_CHIP_GD5464BD:
+ p = gd5464_MaxClocks;
+ break;
+ case PCI_CHIP_GD5465:
+ p = gd5465_MaxClocks;
+ break;
+ default:
+ ErrorF("???\n");
+ return FALSE;
+ }
+ switch (pScrn->bitsPerPixel) {
+ case 8:
+ speed = p[1];
+ break;
+ case 15:
+ case 16:
+ speed = p[2];
+ break;
+ case 24:
+ speed = p[3];
+ break;
+ case 32:
+ speed = p[4];
+ break;
+ default:
+ /* Should not get here */
+ speed = 0;
+ break;
+ }
+ pCir->MaxClock = speed;
+ from = X_PROBED;
+ }
+ xf86DrvMsg(pScrn->scrnIndex, from, "Max pixel clock is %d MHz\n",
+ pCir->MaxClock / 1000);
+
+ /*
+ * Setup the ClockRanges, which describe what clock ranges are available,
+ * and what sort of modes they can be used for.
+ */
+ clockRanges = xnfcalloc(sizeof(ClockRange), 1);
+ clockRanges->next = NULL;
+ clockRanges->minClock = pCir->MinClock;
+ clockRanges->maxClock = pCir->MaxClock;
+ clockRanges->clockIndex = -1; /* programmable */
+ clockRanges->interlaceAllowed = FALSE; /* XXX check this */
+ clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
+ clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
+ clockRanges->doubleScanAllowed = FALSE; /* XXX check this */
+ clockRanges->ClockMulFactor = 1;
+ clockRanges->ClockDivFactor = 1;
+ clockRanges->PrivFlags = 0;
+
+ /* Depending upon what sized tiles used, either 128 or 256. */
+ /* Aw, heck. Just say 128. */
+ pCir->Rounding = 128 >> pCir->BppShift;
+
+ /*
+ * xf86ValidateModes will check that the mode HTotal and VTotal values
+ * don't exceed the chipset's limit if pScrn->maxHValue and
+ * pScrn->maxVValue are set. Since our CIRValidMode() already takes
+ * care of this, we don't worry about setting them here.
+ */
+
+ i = xf86ValidateModes(pScrn, pScrn->monitor->Modes, pScrn->display->modes,
+ clockRanges, LgLinePitches[pScrn->bitsPerPixel / 8 - 1], 0, 0,
+ 128 * 8, 0, 0, /* Any virtual height is allowed. */
+ pScrn->display->virtualX, pScrn->display->virtualY, pCir->FbMapSize,
+ LOOKUP_BEST_REFRESH);
+
+ pCir->chip.lg->lineDataIndex = LgFindLineData(pScrn->displayWidth,
+ pScrn->bitsPerPixel);
+
+ if (i == -1) {
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
+
+ /* Prune the modes marked as invalid */
+ xf86PruneDriverModes(pScrn);
+
+ if (i == 0 || pScrn->modes == NULL) {
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "No valid modes found\n");
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
+
+ /*
+ * Set the CRTC parameters for all of the modes based on the type
+ * of mode, and the chipset's interlace requirements.
+ *
+ * Calling this is required if the mode->Crtc* values are used by the
+ * driver and if the driver doesn't provide code to set them. They
+ * are not pre-initialised at all.
+ */
+ xf86SetCrtcForModes(pScrn, INTERLACE_HALVE_V);
+
+ /* Set the current mode to the first in the list */
+ pScrn->currentMode = pScrn->modes;
+
+ /* Print the list of modes being used */
+ xf86PrintModes(pScrn);
+
+ /* Set display resolution */
+ xf86SetDpi(pScrn, 0, 0);
+
+ /* Load bpp-specific modules */
+ switch (pScrn->bitsPerPixel) {
+ case 8:
+ case 16:
+ case 24:
+ case 32:
+ if (xf86LoadSubModule(pScrn, "fb") == NULL) {
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
+ break;
+ }
+
+ /* Load XAA if needed */
+ if (!pCir->NoAccel) {
#ifdef HAVE_XAA_H
- if (!xf86LoadSubModule(pScrn, "xaa"))
+ if (!xf86LoadSubModule(pScrn, "xaa"))
#else
- if (1)
+ if (1)
#endif
- {
- xf86DrvMsg(pScrn->scrnIndex, X_INFO,
- "Falling back to shadowfb\n");
- pCir->NoAccel = TRUE;
- pCir->shadowFB = TRUE;
- }
- }
-
- /* Load ramdac if needed */
- if (pCir->HWCursor) {
- if (!xf86LoadSubModule(pScrn, "ramdac")) {
- LgFreeRec(pScrn);
- return FALSE;
- }
- }
-
- if (pCir->shadowFB) {
- if (!xf86LoadSubModule(pScrn, "shadowfb")) {
- LgFreeRec(pScrn);
- return FALSE;
- }
- }
-
- return TRUE;
+ {
+ xf86DrvMsg(pScrn->scrnIndex, X_INFO, "Falling back to shadowfb\n");
+ pCir->NoAccel = TRUE;
+ pCir->shadowFB = TRUE;
+ }
+ }
+
+ /* Load ramdac if needed */
+ if (pCir->HWCursor) {
+ if (!xf86LoadSubModule(pScrn, "ramdac")) {
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
+ }
+
+ if (pCir->shadowFB) {
+ if (!xf86LoadSubModule(pScrn, "shadowfb")) {
+ LgFreeRec(pScrn);
+ return FALSE;
+ }
+ }
+
+ return TRUE;
}
/*
* This function saves the video state.
*/
-static void
-LgSave(ScrnInfoPtr pScrn)
-{
- CirPtr pCir = CIRPTR(pScrn);
- vgaHWPtr hwp = VGAHWPTR(pScrn);
+static void LgSave(ScrnInfoPtr pScrn) {
+ CirPtr pCir = CIRPTR(pScrn);
+ vgaHWPtr hwp = VGAHWPTR(pScrn);
#ifdef LG_DEBUG
- ErrorF("LgSave\n");
+ ErrorF("LgSave\n");
#endif
- vgaHWSave(pScrn, &VGAHWPTR(pScrn)->SavedReg, VGA_SR_ALL);
-
- pCir->chip.lg->ModeReg.ExtVga[CR1A] = pCir->chip.lg->SavedReg.ExtVga[CR1A] = hwp->readCrtc(hwp, 0x1A);
- pCir->chip.lg->ModeReg.ExtVga[CR1B] = pCir->chip.lg->SavedReg.ExtVga[CR1B] = hwp->readCrtc(hwp, 0x1B);
- pCir->chip.lg->ModeReg.ExtVga[CR1D] = pCir->chip.lg->SavedReg.ExtVga[CR1D] = hwp->readCrtc(hwp, 0x1D);
- pCir->chip.lg->ModeReg.ExtVga[CR1E] = pCir->chip.lg->SavedReg.ExtVga[CR1E] = hwp->readCrtc(hwp, 0x1E);
- pCir->chip.lg->ModeReg.ExtVga[SR07] = pCir->chip.lg->SavedReg.ExtVga[SR07] = hwp->readSeq(hwp, 0x07);
- pCir->chip.lg->ModeReg.ExtVga[SR0E] = pCir->chip.lg->SavedReg.ExtVga[SR0E] = hwp->readSeq(hwp, 0x0E);
- pCir->chip.lg->ModeReg.ExtVga[SR12] = pCir->chip.lg->SavedReg.ExtVga[SR12] = hwp->readSeq(hwp, 0x12);
- pCir->chip.lg->ModeReg.ExtVga[SR13] = pCir->chip.lg->SavedReg.ExtVga[SR13] = hwp->readSeq(hwp, 0x13);
- pCir->chip.lg->ModeReg.ExtVga[SR1E] = pCir->chip.lg->SavedReg.ExtVga[SR1E] = hwp->readSeq(hwp, 0x1E);
-
- pCir->chip.lg->ModeReg.FORMAT = pCir->chip.lg->SavedReg.FORMAT = memrw(0xC0);
-
- pCir->chip.lg->ModeReg.VSC = pCir->chip.lg->SavedReg.VSC = memrl(0x3FC);
-
- pCir->chip.lg->ModeReg.DTTC = pCir->chip.lg->SavedReg.DTTC = memrw(0xEA);
-
- if (pCir->Chipset == PCI_CHIP_GD5465) {
- pCir->chip.lg->ModeReg.TileCtrl = pCir->chip.lg->SavedReg.TileCtrl = memrw(0x2C4);
- }
-
- pCir->chip.lg->ModeReg.TILE = pCir->chip.lg->SavedReg.TILE = memrb(0x407);
-
- if (pCir->Chipset == PCI_CHIP_GD5465)
- pCir->chip.lg->ModeReg.BCLK = pCir->chip.lg->SavedReg.BCLK = memrb(0x2C0);
- else
- pCir->chip.lg->ModeReg.BCLK = pCir->chip.lg->SavedReg.BCLK = memrb(0x8C);
-
- pCir->chip.lg->ModeReg.CONTROL = pCir->chip.lg->SavedReg.CONTROL = memrw(0x402);
+ vgaHWSave(pScrn, &VGAHWPTR(pScrn)->SavedReg, VGA_SR_ALL);
+
+ pCir->chip.lg->ModeReg.ExtVga[CR1A] = pCir->chip.lg->SavedReg.ExtVga[CR1A] =
+ hwp->readCrtc(hwp, 0x1A);
+ pCir->chip.lg->ModeReg.ExtVga[CR1B] = pCir->chip.lg->SavedReg.ExtVga[CR1B] =
+ hwp->readCrtc(hwp, 0x1B);
+ pCir->chip.lg->ModeReg.ExtVga[CR1D] = pCir->chip.lg->SavedReg.ExtVga[CR1D] =
+ hwp->readCrtc(hwp, 0x1D);
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] = pCir->chip.lg->SavedReg.ExtVga[CR1E] =
+ hwp->readCrtc(hwp, 0x1E);
+ pCir->chip.lg->ModeReg.ExtVga[SR07] = pCir->chip.lg->SavedReg.ExtVga[SR07] =
+ hwp->readSeq(hwp, 0x07);
+ pCir->chip.lg->ModeReg.ExtVga[SR0E] = pCir->chip.lg->SavedReg.ExtVga[SR0E] =
+ hwp->readSeq(hwp, 0x0E);
+ pCir->chip.lg->ModeReg.ExtVga[SR12] = pCir->chip.lg->SavedReg.ExtVga[SR12] =
+ hwp->readSeq(hwp, 0x12);
+ pCir->chip.lg->ModeReg.ExtVga[SR13] = pCir->chip.lg->SavedReg.ExtVga[SR13] =
+ hwp->readSeq(hwp, 0x13);
+ pCir->chip.lg->ModeReg.ExtVga[SR1E] = pCir->chip.lg->SavedReg.ExtVga[SR1E] =
+ hwp->readSeq(hwp, 0x1E);
+
+ pCir->chip.lg->ModeReg.FORMAT = pCir->chip.lg->SavedReg.FORMAT = memrw(
+ 0xC0);
+
+ pCir->chip.lg->ModeReg.VSC = pCir->chip.lg->SavedReg.VSC = memrl(0x3FC);
+
+ pCir->chip.lg->ModeReg.DTTC = pCir->chip.lg->SavedReg.DTTC = memrw(0xEA);
+
+ if (pCir->Chipset == PCI_CHIP_GD5465) {
+ pCir->chip.lg->ModeReg.TileCtrl = pCir->chip.lg->SavedReg.TileCtrl =
+ memrw(0x2C4);
+ }
+
+ pCir->chip.lg->ModeReg.TILE = pCir->chip.lg->SavedReg.TILE = memrb(0x407);
+
+ if (pCir->Chipset == PCI_CHIP_GD5465)
+ pCir->chip.lg->ModeReg.BCLK = pCir->chip.lg->SavedReg.BCLK = memrb(
+ 0x2C0);
+ else
+ pCir->chip.lg->ModeReg.BCLK = pCir->chip.lg->SavedReg.BCLK = memrb(
+ 0x8C);
+
+ pCir->chip.lg->ModeReg.CONTROL = pCir->chip.lg->SavedReg.CONTROL = memrw(
+ 0x402);
}
/*
@@ -867,659 +857,661 @@ LgSave(ScrnInfoPtr pScrn)
* be changed.
*/
-static Bool
-LgModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode)
-{
- vgaHWPtr hwp;
- CirPtr pCir;
- int width;
- Bool VDiv2 = FALSE;
- CARD16 clockData;
- LgLineDataPtr lineData;
+static Bool LgModeInit(ScrnInfoPtr pScrn, DisplayModePtr mode) {
+ vgaHWPtr hwp;
+ CirPtr pCir;
+ int width;
+ Bool VDiv2 = FALSE;
+ CARD16 clockData;
+ LgLineDataPtr lineData;
#ifdef LG_DEBUG
- ErrorF("LgModeInit %d bpp, %d %d %d %d %d %d %d %d %d\n",
- pScrn->bitsPerPixel,
- mode->Clock,
- mode->HDisplay,
- mode->HSyncStart,
- mode->HSyncEnd,
- mode->HTotal,
- mode->VDisplay,
- mode->VSyncStart,
- mode->VSyncEnd,
- mode->VTotal);
-
- ErrorF("LgModeInit: depth %d bits\n", pScrn->depth);
+ ErrorF("LgModeInit %d bpp, %d %d %d %d %d %d %d %d %d\n",
+ pScrn->bitsPerPixel, mode->Clock, mode->HDisplay, mode->HSyncStart,
+ mode->HSyncEnd, mode->HTotal, mode->VDisplay, mode->VSyncStart,
+ mode->VSyncEnd, mode->VTotal);
+
+ ErrorF("LgModeInit: depth %d bits\n", pScrn->depth);
#endif
- pCir = CIRPTR(pScrn);
- hwp = VGAHWPTR(pScrn);
- vgaHWUnlock(hwp);
-
- if (mode->VTotal >= 1024 && !(mode->Flags & V_INTERLACE)) {
- /* For non-interlaced vertical timing >= 1024, the vertical timings */
- /* are divided by 2 and VGA CRTC 0x17 bit 2 is set. */
- if (!mode->CrtcVAdjusted) {
- mode->CrtcVDisplay >>= 1;
- mode->CrtcVSyncStart >>= 1;
- mode->CrtcVSyncEnd >>= 1;
- mode->CrtcVTotal >>= 1;
- mode->CrtcVAdjusted = TRUE;
- }
- VDiv2 = TRUE;
- }
-
- /* Initialise the ModeReg values */
- if (!vgaHWInit(pScrn, mode))
- return FALSE;
- pScrn->vtSema = TRUE;
-
- if (VDiv2)
- hwp->ModeReg.CRTC[0x17] |= 0x04;
+ pCir = CIRPTR(pScrn);
+ hwp = VGAHWPTR(pScrn);
+ vgaHWUnlock(hwp);
+
+ if (mode->VTotal >= 1024 && !(mode->Flags & V_INTERLACE)) {
+ /* For non-interlaced vertical timing >= 1024, the vertical timings */
+ /* are divided by 2 and VGA CRTC 0x17 bit 2 is set. */
+ if (!mode->CrtcVAdjusted) {
+ mode->CrtcVDisplay >>= 1;
+ mode->CrtcVSyncStart >>= 1;
+ mode->CrtcVSyncEnd >>= 1;
+ mode->CrtcVTotal >>= 1;
+ mode->CrtcVAdjusted = TRUE;
+ }
+ VDiv2 = TRUE;
+ }
+
+ /* Initialise the ModeReg values */
+ if (!vgaHWInit(pScrn, mode))
+ return FALSE;
+ pScrn->vtSema = TRUE;
+
+ if (VDiv2)
+ hwp->ModeReg.CRTC[0x17] |= 0x04;
#ifdef LG_DEBUG
- ErrorF("SynthClock = %d\n", mode->SynthClock);
+ ErrorF("SynthClock = %d\n", mode->SynthClock);
#endif
- hwp->IOBase = 0x3D0;
- hwp->ModeReg.MiscOutReg |= 0x01;
+ hwp->IOBase = 0x3D0;
+ hwp->ModeReg.MiscOutReg |= 0x01;
#if 0 /* Mono address */
- hwp->IOBase = 0x3B0;
- hwp->ModeReg.MiscOutReg &= ~0x01;
+ hwp->IOBase = 0x3B0;
+ hwp->ModeReg.MiscOutReg &= ~0x01;
#endif
+ /* ??? Should these be both ...End or ...Start, not one of each? */
+ pCir->chip.lg->ModeReg.ExtVga[CR1A] = (((mode->CrtcVSyncStart + 1) & 0x300)
+ >> 2) | (((mode->CrtcHSyncEnd >> 3) & 0xC0) >> 2);
+
+ width = pScrn->displayWidth * pScrn->bitsPerPixel / 8;
+ if (pScrn->bitsPerPixel == 1)
+ width <<= 2;
+ hwp->ModeReg.CRTC[0x13] = (width + 7) >> 3;
+ /* Offset extension (see CR13) */
+ pCir->chip.lg->ModeReg.ExtVga[CR1B] &= 0xEF;
+ pCir->chip.lg->ModeReg.ExtVga[CR1B] |=
+ (((width + 7) >> 3) & 0x100) ? 0x10 : 0x00;
+ pCir->chip.lg->ModeReg.ExtVga[CR1B] |= 0x22;
+ pCir->chip.lg->ModeReg.ExtVga[CR1D] =
+ (((width + 7) >> 3) & 0x200) ? 0x01 : 0x00;
+
+ /* Set the 28th bit to enable extended modes. */
+ pCir->chip.lg->ModeReg.VSC = 0x10000000;
+
+ /* Overflow register (sure are a lot of overflow bits around...) */
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] = 0x00;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= (
+ (mode->CrtcHTotal >> 3 & 0x0100) ? 1 : 0) << 7;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= (
+ (mode->CrtcHDisplay >> 3 & 0x0100) ? 1 : 0) << 6;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= (
+ (mode->CrtcHSyncStart >> 3 & 0x0100) ? 1 : 0) << 5;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= (
+ (mode->CrtcHSyncStart >> 3 & 0x0100) ? 1 : 0) << 4;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcVTotal & 0x0400) ? 1 : 0)
+ << 3;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= (
+ (mode->CrtcVDisplay & 0x0400) ? 1 : 0) << 2;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= (
+ (mode->CrtcVSyncStart & 0x0400) ? 1 : 0) << 1;
+ pCir->chip.lg->ModeReg.ExtVga[CR1E] |= (
+ (mode->CrtcVSyncStart & 0x0400) ? 1 : 0) << 0;
+
+ lineData = &LgLineData[pCir->chip.lg->lineDataIndex];
+
+ pCir->chip.lg->ModeReg.TILE = lineData->tilesPerLine & 0x3F;
+
+ if (8 == pScrn->bitsPerPixel) {
+ pCir->chip.lg->ModeReg.FORMAT = 0x0000;
+
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8)
+ | 0x0080 | (lineData->width << 6);
+ pCir->chip.lg->ModeReg.CONTROL = 0x0000 | (lineData->width << 11);
+
+ /* There is an optimal FIFO threshold value (lower 5 bits of DTTC)
+ for every resolution and color depth combination. We'll hit
+ the highlights here, and get close for anything that's not
+ covered. */
+ if (mode->CrtcHDisplay <= 640) {
+ /* BAD numbers: 0x1E */
+ /* GOOD numbers: 0x14 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0014);
+ } else if (mode->CrtcHDisplay <= 800) {
+ /* BAD numbers: 0x16 */
+ /* GOOD numbers: 0x13 0x14 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0014);
+ } else if (mode->CrtcHDisplay <= 1024) {
+ /* BAD numbers: */
+ /* GOOD numbers: 0x15 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0015);
+ } else if (mode->CrtcHDisplay <= 1280) {
+ /* BAD numbers: */
+ /* GOOD numbers: 0x16 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0016);
+ } else {
+ /* BAD numbers: */
+ /* GOOD numbers: */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0017);
+ }
+ } else if (16 == pScrn->bitsPerPixel) {
+ /* !!! Assume 5-6-5 RGB mode (for now...) */
+ pCir->chip.lg->ModeReg.FORMAT = 0x1400;
+
+ if (pScrn->depth == 15)
+ pCir->chip.lg->ModeReg.FORMAT = 0x1600;
+
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8)
+ | 0x0080 | (lineData->width << 6);
+ pCir->chip.lg->ModeReg.CONTROL = 0x2000 | (lineData->width << 11);
+
+ if (mode->CrtcHDisplay <= 640) {
+ /* BAD numbers: 0x12 */
+ /* GOOD numbers: 0x10 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0010);
+ } else if (mode->CrtcHDisplay <= 800) {
+ /* BAD numbers: 0x13 */
+ /* GOOD numbers: 0x11 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0011);
+ } else if (mode->CrtcHDisplay <= 1024) {
+ /* BAD numbers: 0x14 */
+ /* GOOD numbers: 0x12 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0012);
+ } else if (mode->CrtcHDisplay <= 1280) {
+ /* BAD numbers: 0x08 0x10 */
+ /* Borderline numbers: 0x12 */
+ /* GOOD numbers: 0x15 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0015);
+ } else {
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0017);
+ }
+ } else if (24 == pScrn->bitsPerPixel) {
+ pCir->chip.lg->ModeReg.FORMAT = 0x2400;
+
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8)
+ | 0x0080 | (lineData->width << 6);
+ pCir->chip.lg->ModeReg.CONTROL = 0x4000 | (lineData->width << 11);
+
+ if (mode->CrtcHDisplay <= 640) {
+ /* BAD numbers: */
+ /* GOOD numbers: 0x10 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0010);
+ } else if (mode->CrtcHDisplay <= 800) {
+ /* BAD numbers: */
+ /* GOOD numbers: 0x11 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0011);
+ } else if (mode->CrtcHDisplay <= 1024) {
+ /* BAD numbers: 0x12 0x13 */
+ /* Borderline numbers: 0x15 */
+ /* GOOD numbers: 0x17 */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0017);
+ } else if (mode->CrtcHDisplay <= 1280) {
+ /* BAD numbers: */
+ /* GOOD numbers: 0x1E */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x001E);
+ } else {
+ /* BAD numbers: */
+ /* GOOD numbers: */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0020);
+ }
+ } else if (32 == pScrn->bitsPerPixel) {
+ pCir->chip.lg->ModeReg.FORMAT = 0x3400;
+
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8)
+ | 0x0080 | (lineData->width << 6);
+ pCir->chip.lg->ModeReg.CONTROL = 0x6000 | (lineData->width << 11);
+
+ if (mode->CrtcHDisplay <= 640) {
+ /* GOOD numbers: 0x0E */
+ /* BAD numbers: */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x000E);
+ } else if (mode->CrtcHDisplay <= 800) {
+ /* GOOD numbers: 0x17 */
+ /* BAD numbers: */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0017);
+ } else if (mode->CrtcHDisplay <= 1024) {
+ /* GOOD numbers: 0x1D */
+ /* OKAY numbers: 0x15 0x14 0x16 0x18 0x19 */
+ /* BAD numbers: 0x0E 0x12 0x13 0x0D */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x001D);
+ } else if (mode->CrtcHDisplay <= 1280) {
+ /* GOOD numbers: */
+ /* BAD numbers: */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0022); /* 10 */
+ } else {
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0)
+ | (0x0024);
+ }
+ } else {
+ /* ??? What could it be? Use some sane numbers. */
+ }
- /* ??? Should these be both ...End or ...Start, not one of each? */
- pCir->chip.lg->ModeReg.ExtVga[CR1A] = (((mode->CrtcVSyncStart + 1) & 0x300 ) >> 2)
- | (((mode->CrtcHSyncEnd >> 3) & 0xC0) >> 2);
-
- width = pScrn->displayWidth * pScrn->bitsPerPixel / 8;
- if (pScrn->bitsPerPixel == 1)
- width <<= 2;
- hwp->ModeReg.CRTC[0x13] = (width + 7) >> 3;
- /* Offset extension (see CR13) */
- pCir->chip.lg->ModeReg.ExtVga[CR1B] &= 0xEF;
- pCir->chip.lg->ModeReg.ExtVga[CR1B] |= (((width + 7) >> 3) & 0x100)?0x10:0x00;
- pCir->chip.lg->ModeReg.ExtVga[CR1B] |= 0x22;
- pCir->chip.lg->ModeReg.ExtVga[CR1D] = (((width + 7) >> 3) & 0x200)?0x01:0x00;
-
- /* Set the 28th bit to enable extended modes. */
- pCir->chip.lg->ModeReg.VSC = 0x10000000;
-
- /* Overflow register (sure are a lot of overflow bits around...) */
- pCir->chip.lg->ModeReg.ExtVga[CR1E] = 0x00;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcHTotal>>3 & 0x0100)?1:0)<<7;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcHDisplay>>3 & 0x0100)?1:0)<<6;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcHSyncStart>>3 & 0x0100)?1:0)<<5;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcHSyncStart>>3 & 0x0100)?1:0)<<4;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcVTotal & 0x0400)?1:0)<<3;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcVDisplay & 0x0400)?1:0)<<2;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcVSyncStart & 0x0400)?1:0)<<1;
- pCir->chip.lg->ModeReg.ExtVga[CR1E] |= ((mode->CrtcVSyncStart & 0x0400)?1:0)<<0;
-
- lineData = &LgLineData[pCir->chip.lg->lineDataIndex];
-
- pCir->chip.lg->ModeReg.TILE = lineData->tilesPerLine & 0x3F;
-
- if (8 == pScrn->bitsPerPixel) {
- pCir->chip.lg->ModeReg.FORMAT = 0x0000;
-
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8) | 0x0080
- | (lineData->width << 6);
- pCir->chip.lg->ModeReg.CONTROL = 0x0000 | (lineData->width << 11);
-
-
- /* There is an optimal FIFO threshold value (lower 5 bits of DTTC)
- for every resolution and color depth combination. We'll hit
- the highlights here, and get close for anything that's not
- covered. */
- if (mode->CrtcHDisplay <= 640) {
- /* BAD numbers: 0x1E */
- /* GOOD numbers: 0x14 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0014);
- } else if (mode->CrtcHDisplay <= 800) {
- /* BAD numbers: 0x16 */
- /* GOOD numbers: 0x13 0x14 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0014);
- } else if (mode->CrtcHDisplay <= 1024) {
- /* BAD numbers: */
- /* GOOD numbers: 0x15 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0015);
- } else if (mode->CrtcHDisplay <= 1280) {
- /* BAD numbers: */
- /* GOOD numbers: 0x16 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0016);
- } else {
- /* BAD numbers: */
- /* GOOD numbers: */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0017);
- }
- } else if (16 == pScrn->bitsPerPixel) {
- /* !!! Assume 5-6-5 RGB mode (for now...) */
- pCir->chip.lg->ModeReg.FORMAT = 0x1400;
-
- if (pScrn->depth == 15)
- pCir->chip.lg->ModeReg.FORMAT = 0x1600;
-
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8) | 0x0080
- | (lineData->width << 6);
- pCir->chip.lg->ModeReg.CONTROL = 0x2000 | (lineData->width << 11);
-
- if (mode->CrtcHDisplay <= 640) {
- /* BAD numbers: 0x12 */
- /* GOOD numbers: 0x10 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0010);
- } else if (mode->CrtcHDisplay <= 800) {
- /* BAD numbers: 0x13 */
- /* GOOD numbers: 0x11 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0011);
- } else if (mode->CrtcHDisplay <= 1024) {
- /* BAD numbers: 0x14 */
- /* GOOD numbers: 0x12 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0012);
- } else if (mode->CrtcHDisplay <= 1280) {
- /* BAD numbers: 0x08 0x10 */
- /* Borderline numbers: 0x12 */
- /* GOOD numbers: 0x15 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0015);
- } else {
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0017);
- }
- } else if (24 == pScrn->bitsPerPixel) {
- pCir->chip.lg->ModeReg.FORMAT = 0x2400;
-
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8) | 0x0080
- | (lineData->width << 6);
- pCir->chip.lg->ModeReg.CONTROL = 0x4000 | (lineData->width << 11);
-
- if (mode->CrtcHDisplay <= 640) {
- /* BAD numbers: */
- /* GOOD numbers: 0x10 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0010);
- } else if (mode->CrtcHDisplay <= 800) {
- /* BAD numbers: */
- /* GOOD numbers: 0x11 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0011);
- } else if (mode->CrtcHDisplay <= 1024) {
- /* BAD numbers: 0x12 0x13 */
- /* Borderline numbers: 0x15 */
- /* GOOD numbers: 0x17 */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0017);
- } else if (mode->CrtcHDisplay <= 1280) {
- /* BAD numbers: */
- /* GOOD numbers: 0x1E */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x001E);
- } else {
- /* BAD numbers: */
- /* GOOD numbers: */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0020);
- }
- } else if (32 == pScrn->bitsPerPixel) {
- pCir->chip.lg->ModeReg.FORMAT = 0x3400;
-
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.TILE << 8) | 0x0080
- | (lineData->width << 6);
- pCir->chip.lg->ModeReg.CONTROL = 0x6000 | (lineData->width << 11);
-
- if (mode->CrtcHDisplay <= 640) {
- /* GOOD numbers: 0x0E */
- /* BAD numbers: */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x000E);
- } else if (mode->CrtcHDisplay <= 800) {
- /* GOOD numbers: 0x17 */
- /* BAD numbers: */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0017);
- } else if (mode->CrtcHDisplay <= 1024) {
- /* GOOD numbers: 0x1D */
- /* OKAY numbers: 0x15 0x14 0x16 0x18 0x19 */
- /* BAD numbers: 0x0E 0x12 0x13 0x0D */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x001D);
- } else if (mode->CrtcHDisplay <= 1280) {
- /* GOOD numbers: */
- /* BAD numbers: */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0022); /* 10 */
- } else {
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xFFE0) | (0x0024);
- }
- } else {
- /* ??? What could it be? Use some sane numbers. */
- }
-
- /* Setup the appropriate memory interleaving */
- pCir->chip.lg->ModeReg.DTTC |= (pCir->chip.lg->memInterleave << 8);
- pCir->chip.lg->ModeReg.TILE |= pCir->chip.lg->memInterleave & 0xC0;
-
- if (PCI_CHIP_GD5465 == pCir->Chipset) {
- /* The tile control information in the DTTC is also mirrored
- elsewhere. */
- pCir->chip.lg->ModeReg.TileCtrl = pCir->chip.lg->ModeReg.DTTC & 0xFFC0;
-
- /* The 5465's DTTC records _fetches_ per line, not
- tiles per line. Fetchs are 128-byte fetches. */
- if (pCir->chip.lg->ModeReg.DTTC & 0x0040) {
- /* Using 256-byte wide tiles. Double the fetches
- per line field. */
- pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xC0FF)
- | ((pCir->chip.lg->ModeReg.DTTC & 0x3F00) << 1);
- }
- }
-
- /* Program the registers */
- vgaHWProtect(pScrn, TRUE);
- hwp->writeMiscOut(hwp, hwp->ModeReg.MiscOutReg);
-
- clockData = LgSetClock(pCir, hwp, mode->SynthClock);
- pCir->chip.lg->ModeReg.ExtVga[SR0E] = (clockData >> 8) & 0xFF;
- pCir->chip.lg->ModeReg.ExtVga[SR1E] = clockData & 0xFF;
-
- /* Write those registers out to the card. */
- LgRestoreLgRegs(pScrn, &pCir->chip.lg->ModeReg);
-
- /* Programme the registers */
- vgaHWRestore(pScrn, &hwp->ModeReg, VGA_SR_MODE | VGA_SR_CMAP);
-
- vgaHWProtect(pScrn, FALSE);
-
- return TRUE;
+ /* Setup the appropriate memory interleaving */
+ pCir->chip.lg->ModeReg.DTTC |= (pCir->chip.lg->memInterleave << 8);
+ pCir->chip.lg->ModeReg.TILE |= pCir->chip.lg->memInterleave & 0xC0;
+
+ if (PCI_CHIP_GD5465 == pCir->Chipset) {
+ /* The tile control information in the DTTC is also mirrored
+ elsewhere. */
+ pCir->chip.lg->ModeReg.TileCtrl = pCir->chip.lg->ModeReg.DTTC & 0xFFC0;
+
+ /* The 5465's DTTC records _fetches_ per line, not
+ tiles per line. Fetchs are 128-byte fetches. */
+ if (pCir->chip.lg->ModeReg.DTTC & 0x0040) {
+ /* Using 256-byte wide tiles. Double the fetches
+ per line field. */
+ pCir->chip.lg->ModeReg.DTTC = (pCir->chip.lg->ModeReg.DTTC & 0xC0FF)
+ | ((pCir->chip.lg->ModeReg.DTTC & 0x3F00) << 1);
+ }
+ }
+
+ /* Program the registers */
+ vgaHWProtect(pScrn, TRUE);
+ hwp->writeMiscOut(hwp, hwp->ModeReg.MiscOutReg);
+
+ clockData = LgSetClock(pCir, hwp, mode->SynthClock);
+ pCir->chip.lg->ModeReg.ExtVga[SR0E] = (clockData >> 8) & 0xFF;
+ pCir->chip.lg->ModeReg.ExtVga[SR1E] = clockData & 0xFF;
+
+ /* Write those registers out to the card. */
+ LgRestoreLgRegs(pScrn, &pCir->chip.lg->ModeReg);
+
+ /* Programme the registers */
+ vgaHWRestore(pScrn, &hwp->ModeReg, VGA_SR_MODE | VGA_SR_CMAP);
+
+ vgaHWProtect(pScrn, FALSE);
+
+ return TRUE;
}
-static int LgFindLineData(int displayWidth, int bpp)
-{
- /* Find the smallest tile-line-pitch such that the total byte pitch
- is greater than or equal to displayWidth*Bpp. */
- int i;
-
- /* Some pitch sizes are duplicates in the table. BUT, the invariant is
- that the _first_ time a pitch occurs in the table is always _before_
- all other pitches greater than it. Said in another way... if all
- duplicate entries from the table were removed, then the resulting pitch
- values are strictly increasing. */
-
- for (i = 0; LgLineData[i].pitch > 0; i++)
- if (LgLineData[i].pitch >= displayWidth*bpp>>3)
- return i;
-
- /* Um, uh oh! */
- return -1;
+static int LgFindLineData(int displayWidth, int bpp) {
+ /* Find the smallest tile-line-pitch such that the total byte pitch
+ is greater than or equal to displayWidth*Bpp. */
+ int i;
+
+ /* Some pitch sizes are duplicates in the table. BUT, the invariant is
+ that the _first_ time a pitch occurs in the table is always _before_
+ all other pitches greater than it. Said in another way... if all
+ duplicate entries from the table were removed, then the resulting pitch
+ values are strictly increasing. */
+
+ for (i = 0; LgLineData[i].pitch > 0; i++)
+ if (LgLineData[i].pitch >= displayWidth * bpp >> 3)
+ return i;
+
+ /* Um, uh oh! */
+ return -1;
}
+static void LgRestoreLgRegs(ScrnInfoPtr pScrn, LgRegPtr lgReg) {
+ CirPtr pCir;
+ vgaHWPtr hwp;
+ CARD8 cr1D;
+ pCir = CIRPTR(pScrn);
+ /* First, VGAish registers. */
+ hwp = VGAHWPTR(pScrn);
+ hwp->writeCrtc(hwp, 0x1A, lgReg->ExtVga[CR1A]);
+ hwp->writeCrtc(hwp, 0x1B, lgReg->ExtVga[CR1B]);
+ cr1D = (hwp->readCrtc(hwp, 0x1D) & ~1) | (lgReg->ExtVga[CR1D] & 0x01);
+ hwp->writeCrtc(hwp, 0x1D, cr1D);
+ hwp->writeCrtc(hwp, 0x1E, lgReg->ExtVga[CR1E]);
+
+ hwp->writeSeq(hwp, 0x07, lgReg->ExtVga[SR07]);
+ hwp->writeSeq(hwp, 0x0E, lgReg->ExtVga[SR0E]);
+ hwp->writeSeq(hwp, 0x12, lgReg->ExtVga[SR12]);
+ hwp->writeSeq(hwp, 0x13, lgReg->ExtVga[SR13]);
+ hwp->writeSeq(hwp, 0x1E, lgReg->ExtVga[SR1E]);
+ memww(0xC0, lgReg->FORMAT);
-static void
-LgRestoreLgRegs(ScrnInfoPtr pScrn, LgRegPtr lgReg)
-{
- CirPtr pCir;
- vgaHWPtr hwp;
- CARD8 cr1D;
-
- pCir = CIRPTR(pScrn);
-
- /* First, VGAish registers. */
- hwp = VGAHWPTR(pScrn);
- hwp->writeCrtc(hwp, 0x1A, lgReg->ExtVga[CR1A]);
- hwp->writeCrtc(hwp, 0x1B, lgReg->ExtVga[CR1B]);
- cr1D = (hwp->readCrtc(hwp, 0x1D) & ~1) | (lgReg->ExtVga[CR1D] & 0x01);
- hwp->writeCrtc(hwp, 0x1D, cr1D);
- hwp->writeCrtc(hwp, 0x1E, lgReg->ExtVga[CR1E]);
-
- hwp->writeSeq(hwp, 0x07, lgReg->ExtVga[SR07]);
- hwp->writeSeq(hwp, 0x0E, lgReg->ExtVga[SR0E]);
- hwp->writeSeq(hwp, 0x12, lgReg->ExtVga[SR12]);
- hwp->writeSeq(hwp, 0x13, lgReg->ExtVga[SR13]);
- hwp->writeSeq(hwp, 0x1E, lgReg->ExtVga[SR1E]);
- memww(0xC0, lgReg->FORMAT);
-
/* Vendor Specific Control is touchy. Only bit 28 is of concern. */
- memwl(0x3FC, ((memrl(0x3FC) & ~(1<<28)) | (lgReg->VSC & (1<<28))));
-
- memww(0xEA, lgReg->DTTC);
-
- if (pCir->Chipset == PCI_CHIP_GD5465) {
- memww(0x2C4, lgReg->TileCtrl);
- }
-
- memwb(0x407, lgReg->TILE);
-
- if (pCir->Chipset == PCI_CHIP_GD5465)
- memwb(0x2C0, lgReg->BCLK);
- else
- memwb(0x8C, lgReg->BCLK);
-
- memww(0x402, lgReg->CONTROL);
+ memwl(0x3FC, ((memrl(0x3FC) & ~(1 << 28)) | (lgReg->VSC & (1 << 28))));
+
+ memww(0xEA, lgReg->DTTC);
+
+ if (pCir->Chipset == PCI_CHIP_GD5465) {
+ memww(0x2C4, lgReg->TileCtrl);
+ }
+
+ memwb(0x407, lgReg->TILE);
+
+ if (pCir->Chipset == PCI_CHIP_GD5465)
+ memwb(0x2C0, lgReg->BCLK);
+ else
+ memwb(0x8C, lgReg->BCLK);
+
+ memww(0x402, lgReg->CONTROL);
}
/*
* Restore the initial (text) mode.
*/
-static void
-LgRestore(ScrnInfoPtr pScrn)
-{
- vgaHWPtr hwp;
- vgaRegPtr vgaReg;
- CirPtr pCir;
- LgRegPtr lgReg;
+static void LgRestore(ScrnInfoPtr pScrn) {
+ vgaHWPtr hwp;
+ vgaRegPtr vgaReg;
+ CirPtr pCir;
+ LgRegPtr lgReg;
#ifdef LG_DEBUG
- ErrorF("LgRestore pScrn = %p\n", (void *)pScrn);
+ ErrorF("LgRestore pScrn = %p\n", (void *) pScrn);
#endif
- pCir = CIRPTR(pScrn);
- hwp = VGAHWPTR(pScrn);
- vgaReg = &hwp->SavedReg;
- lgReg = &pCir->chip.lg->SavedReg;
+ pCir = CIRPTR(pScrn);
+ hwp = VGAHWPTR(pScrn);
+ vgaReg = &hwp->SavedReg;
+ lgReg = &pCir->chip.lg->SavedReg;
- vgaHWProtect(pScrn, TRUE);
+ vgaHWProtect(pScrn, TRUE);
- LgRestoreLgRegs(pScrn, lgReg);
+ LgRestoreLgRegs(pScrn, lgReg);
- vgaHWRestore(pScrn, vgaReg, VGA_SR_ALL);
- vgaHWProtect(pScrn, FALSE);
+ vgaHWRestore(pScrn, vgaReg, VGA_SR_ALL);
+ vgaHWProtect(pScrn, FALSE);
}
/* Mandatory */
/* This gets called at the start of each server generation */
-Bool
-LgScreenInit(SCREEN_INIT_ARGS_DECL)
-{
- /* The vgaHW references will disappear one day */
- ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
- vgaHWPtr hwp;
- CirPtr pCir;
- int i, ret;
- VisualPtr visual;
- int displayWidth,width,height;
- unsigned char * FbBase = NULL;
+Bool LgScreenInit(SCREEN_INIT_ARGS_DECL) {
+ /* The vgaHW references will disappear one day */
+ ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
+ vgaHWPtr hwp;
+ CirPtr pCir;
+ int i, ret;
+ VisualPtr visual;
+ int displayWidth, width, height;
+ unsigned char * FbBase = NULL;
#ifdef LG_DEBUG
- ErrorF("LgScreenInit\n");
+ ErrorF("LgScreenInit\n");
#endif
- hwp = VGAHWPTR(pScrn);
+ hwp = VGAHWPTR(pScrn);
- hwp->MapSize = 0x10000; /* Standard 64k VGA window */
+ hwp->MapSize = 0x10000; /* Standard 64k VGA window */
- pCir = CIRPTR(pScrn);
+ pCir = CIRPTR(pScrn);
- /* Map the VGA memory and get the VGA IO base */
- if (!vgaHWMapMem(pScrn))
- return FALSE;
+ /* Map the VGA memory and get the VGA IO base */
+ if (!vgaHWMapMem(pScrn))
+ return FALSE;
- /* Map the CIR memory and MMIO areas */
- if (!CirMapMem(pCir, pScrn->scrnIndex))
- return FALSE;
+ /* Map the CIR memory and MMIO areas */
+ if (!CirMapMem(pCir, pScrn->scrnIndex))
+ return FALSE;
#ifdef EXPERIMENTAL
- lg_vgaHWSetMmioFunc(hwp, pCir->IOBase);
+ lg_vgaHWSetMmioFunc(hwp, pCir->IOBase);
#endif
- vgaHWGetIOBase(hwp);
+ vgaHWGetIOBase(hwp);
- /* Save the current state */
- LgSave(pScrn);
+ /* Save the current state */
+ LgSave(pScrn);
- /* Initialise the first mode */
- if (!LgModeInit(pScrn, pScrn->currentMode))
- return FALSE;
+ /* Initialise the first mode */
+ if (!LgModeInit(pScrn, pScrn->currentMode))
+ return FALSE;
- /* Make things beautiful */
- LgSaveScreen(pScreen, SCREEN_SAVER_ON);
+ /* Make things beautiful */
+ LgSaveScreen(pScreen, SCREEN_SAVER_ON);
- /* Set the viewport */
- LgAdjustFrame(ADJUST_FRAME_ARGS(pScrn, pScrn->frameX0, pScrn->frameY0));
+ /* Set the viewport */
+ LgAdjustFrame(ADJUST_FRAME_ARGS(pScrn, pScrn->frameX0, pScrn->frameY0));
- /*
- * The next step is to setup the screen's visuals, and initialise the
- * framebuffer code. In cases where the framebuffer's default
- * choices for things like visual layouts and bits per RGB are OK,
- * this may be as simple as calling the framebuffer's ScreenInit()
- * function. If not, the visuals will need to be setup before calling
- * a fb ScreenInit() function and fixed up after.
- *
- */
+ /*
+ * The next step is to setup the screen's visuals, and initialise the
+ * framebuffer code. In cases where the framebuffer's default
+ * choices for things like visual layouts and bits per RGB are OK,
+ * this may be as simple as calling the framebuffer's ScreenInit()
+ * function. If not, the visuals will need to be setup before calling
+ * a fb ScreenInit() function and fixed up after.
+ *
+ */
- /*
- * Reset the visual list.
- */
- miClearVisualTypes();
+ /*
+ * Reset the visual list.
+ */
+ miClearVisualTypes();
- /* Setup the visuals we support. */
+ /* Setup the visuals we support. */
- if (!miSetVisualTypes(pScrn->depth,
- miGetDefaultVisualMask(pScrn->depth),
- pScrn->rgbBits, pScrn->defaultVisual))
- return FALSE;
+ if (!miSetVisualTypes(pScrn->depth, miGetDefaultVisualMask(pScrn->depth),
+ pScrn->rgbBits, pScrn->defaultVisual))
+ return FALSE;
- miSetPixmapDepths ();
+ miSetPixmapDepths();
#ifdef LG_DEBUG
- ErrorF("LgScreenInit after miSetVisualTypes\n");
+ ErrorF("LgScreenInit after miSetVisualTypes\n");
#endif
- displayWidth = pScrn->displayWidth;
- if (pCir->rotate) {
- height = pScrn->virtualX;
- width = pScrn->virtualY;
- } else {
- width = pScrn->virtualX;
- height = pScrn->virtualY;
- }
-
- if(pCir->shadowFB) {
- pCir->ShadowPitch = BitmapBytePad(pScrn->bitsPerPixel * width);
- pCir->ShadowPtr = malloc(pCir->ShadowPitch * height);
- displayWidth = pCir->ShadowPitch / (pScrn->bitsPerPixel >> 3);
- FbBase = pCir->ShadowPtr;
- } else {
- pCir->ShadowPtr = NULL;
- FbBase = pCir->FbBase;
- }
-
- /*
- * Call the framebuffer layer's ScreenInit function, and fill in other
- * pScreen fields.
- */
- switch (pScrn->bitsPerPixel) {
- case 8:
- case 16:
- case 24:
- case 32:
- ret = fbScreenInit(pScreen, FbBase,
- width,height,
- pScrn->xDpi, pScrn->yDpi,
- displayWidth,pScrn->bitsPerPixel);
- break;
- default:
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "X11: Internal error: invalid bpp (%d) in LgScreenInit\n",
- pScrn->bitsPerPixel);
- ret = FALSE;
- break;
- }
- if (!ret)
- return FALSE;
+ displayWidth = pScrn->displayWidth;
+ if (pCir->rotate) {
+ height = pScrn->virtualX;
+ width = pScrn->virtualY;
+ } else {
+ width = pScrn->virtualX;
+ height = pScrn->virtualY;
+ }
+
+ if (pCir->shadowFB) {
+ pCir->ShadowPitch = BitmapBytePad(pScrn->bitsPerPixel * width);
+ pCir->ShadowPtr = malloc(pCir->ShadowPitch * height);
+ displayWidth = pCir->ShadowPitch / (pScrn->bitsPerPixel >> 3);
+ FbBase = pCir->ShadowPtr;
+ } else {
+ pCir->ShadowPtr = NULL;
+ FbBase = pCir->FbBase;
+ }
+
+ /*
+ * Call the framebuffer layer's ScreenInit function, and fill in other
+ * pScreen fields.
+ */
+ switch (pScrn->bitsPerPixel) {
+ case 8:
+ case 16:
+ case 24:
+ case 32:
+ ret = fbScreenInit(pScreen, FbBase, width, height, pScrn->xDpi,
+ pScrn->yDpi, displayWidth, pScrn->bitsPerPixel);
+ break;
+ default:
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "X11: Internal error: invalid bpp (%d) in LgScreenInit\n",
+ pScrn->bitsPerPixel);
+ ret = FALSE;
+ break;
+ }
+ if (!ret)
+ return FALSE;
#ifdef LG_DEBUG
- ErrorF("LgScreenInit after depth dependent init\n");
+ ErrorF("LgScreenInit after depth dependent init\n");
#endif
- /* Override the default mask/offset settings */
- if (pScrn->bitsPerPixel > 8) {
- for (i = 0; i < pScreen->numVisuals; i++) {
- visual = &pScreen->visuals[i];
- if ((visual->class | DynamicClass) == DirectColor) {
- visual->offsetRed = pScrn->offset.red;
- visual->offsetGreen = pScrn->offset.green;
- visual->offsetBlue = pScrn->offset.blue;
- visual->redMask = pScrn->mask.red;
- visual->greenMask = pScrn->mask.green;
- visual->blueMask = pScrn->mask.blue;
- }
- }
- }
-
- /* must be after RGB ordering fixed */
-
- fbPictureInit(pScreen, 0, 0);
-
- /*
- * Set initial black & white colourmap indices.
- */
- xf86SetBlackWhitePixels(pScreen);
+ /* Override the default mask/offset settings */
+ if (pScrn->bitsPerPixel > 8) {
+ for (i = 0; i < pScreen->numVisuals; i++) {
+ visual = &pScreen->visuals[i];
+ if ((visual->class | DynamicClass) == DirectColor) {
+ visual->offsetRed = pScrn->offset.red;
+ visual->offsetGreen = pScrn->offset.green;
+ visual->offsetBlue = pScrn->offset.blue;
+ visual->redMask = pScrn->mask.red;
+ visual->greenMask = pScrn->mask.green;
+ visual->blueMask = pScrn->mask.blue;
+ }
+ }
+ }
+
+ /* must be after RGB ordering fixed */
+
+ fbPictureInit(pScreen, 0, 0);
+
+ /*
+ * Set initial black & white colourmap indices.
+ */
+ xf86SetBlackWhitePixels(pScreen);
#ifdef HAVE_XAA_H
- if (!pCir->NoAccel) { /* Initialize XAA functions */
- if (!LgXAAInit(pScreen))
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Could not initialize XAA\n");
- }
+ if (!pCir->NoAccel) { /* Initialize XAA functions */
+ if (!LgXAAInit(pScreen))
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "Could not initialize XAA\n");
+ }
#endif
#if 1
- pCir->DGAModeInit = LgModeInit;
- if (!CirDGAInit(pScreen))
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "DGA initialization failed\n");
+ pCir->DGAModeInit = LgModeInit;
+ if (!CirDGAInit(pScreen))
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR, "DGA initialization failed\n");
#endif
- xf86SetSilkenMouse(pScreen);
+ xf86SetSilkenMouse(pScreen);
- /* Initialise cursor functions */
- miDCInitialize(pScreen, xf86GetPointerScreenFuncs());
+ /* Initialise cursor functions */
+ miDCInitialize(pScreen, xf86GetPointerScreenFuncs());
- if (pCir->HWCursor) { /* Initialize HW cursor layer */
- if (!LgHWCursorInit(pScreen))
- xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
- "Hardware cursor initialization failed\n");
- }
+ if (pCir->HWCursor) { /* Initialize HW cursor layer */
+ if (!LgHWCursorInit(pScreen))
+ xf86DrvMsg(pScrn->scrnIndex, X_ERROR,
+ "Hardware cursor initialization failed\n");
+ }
- /* Initialise default colourmap */
- if (!miCreateDefColormap(pScreen))
- return FALSE;
+ /* Initialise default colourmap */
+ if (!miCreateDefColormap(pScreen))
+ return FALSE;
- if (pScrn->bitsPerPixel > 1 && pScrn->bitsPerPixel <= 8)
- vgaHWHandleColormaps(pScreen);
+ if (pScrn->bitsPerPixel > 1 && pScrn->bitsPerPixel <= 8)
+ vgaHWHandleColormaps(pScreen);
- xf86DPMSInit(pScreen, LgDisplayPowerManagementSet, 0);
+ xf86DPMSInit(pScreen, LgDisplayPowerManagementSet, 0);
- pScrn->memPhysBase = pCir->FbAddress;
- pScrn->fbOffset = 0;
+ pScrn->memPhysBase = pCir->FbAddress;
+ pScrn->fbOffset = 0;
- {
- XF86VideoAdaptorPtr *ptr;
- int n;
+ {
+ XF86VideoAdaptorPtr *ptr;
+ int n;
- n = xf86XVListGenericAdaptors(pScrn,&ptr);
- if (n)
- xf86XVScreenInit(pScreen, ptr, n);
- }
+ n = xf86XVListGenericAdaptors(pScrn, &ptr);
+ if (n)
+ xf86XVScreenInit(pScreen, ptr, n);
+ }
- /*
- * Wrap the CloseScreen vector and set SaveScreen.
- */
- pScreen->SaveScreen = LgSaveScreen;
- pCir->CloseScreen = pScreen->CloseScreen;
- pScreen->CloseScreen = LgCloseScreen;
+ /*
+ * Wrap the CloseScreen vector and set SaveScreen.
+ */
+ pScreen->SaveScreen = LgSaveScreen;
+ pCir->CloseScreen = pScreen->CloseScreen;
+ pScreen->CloseScreen = LgCloseScreen;
- /* Report any unused options (only for the first generation) */
- if (serverGeneration == 1)
- xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options);
+ /* Report any unused options (only for the first generation) */
+ if (serverGeneration == 1)
+ xf86ShowUnusedOptions(pScrn->scrnIndex, pScrn->options);
- /* Done */
- return TRUE;
+ /* Done */
+ return TRUE;
}
-
/* Usually mandatory */
-Bool
-LgSwitchMode(SWITCH_MODE_ARGS_DECL)
-{
- SCRN_INFO_PTR(arg);
- return LgModeInit(pScrn, mode);
+Bool LgSwitchMode(SWITCH_MODE_ARGS_DECL) {
+ SCRN_INFO_PTR(arg);
+ return LgModeInit(pScrn, mode);
}
-#define ROUND_DOWN(x, mod) (((x) / (mod)) * (mod))
-#define ROUND_UP(x, mod) ((((x) + (mod) - 1) / (mod)) * (mod))
+#define ROUND_DOWN(x, mod) (((x) / (mod)) * (mod))
+#define ROUND_UP(x, mod) ((((x) + (mod) - 1) / (mod)) * (mod))
/*
* This function is used to initialize the Start Address - the first
* displayed location in the video memory.
*/
/* Usually mandatory */
-void
-LgAdjustFrame(ADJUST_FRAME_ARGS_DECL)
-{
- SCRN_INFO_PTR(arg);
- int Base, tmp;
- CirPtr pCir = CIRPTR(pScrn);
- vgaHWPtr hwp = VGAHWPTR(pScrn);
- int cursorX, cursorY;
- int middleX, middleY;
- const LgLineDataPtr lineData = &LgLineData[pCir->chip.lg->lineDataIndex];
- const int viewportXRes =
- (PCI_CHIP_GD5465 == pCir->Chipset) ? (24==pScrn->bitsPerPixel?24:1) :
- (lineData->width?256:128) /
- (24==pScrn->bitsPerPixel?1:(pScrn->bitsPerPixel>>3));
- const int viewportYRes =
- (PCI_CHIP_GD5465 == pCir->Chipset) ? 1 : (24==pScrn->bitsPerPixel?3:1);
-
- /* Where's the pointer? */
- miPointerGetPosition(inputInfo.pointer, &cursorX, &cursorY);
-
- /* Where's the middle of the screen? We want to eventually know
- which side of the screen the pointer is on. */
- middleX = (pScrn->frameX1 + pScrn->frameX0) / 2;
- middleY = (pScrn->frameY1 + pScrn->frameY0) / 2;
-
- if (cursorX < middleX) {
- /* Pointer is on left side of screen. Round the frame value down. */
- pScrn->frameX0 = ROUND_DOWN(pScrn->frameX0, viewportXRes);
- } else {
- /* Pointer is on right side of screen. Round the frame value
- up. A side effect of this rounding up is that we might expose
- a part of the screen that's actually on the far /left/ of the
- frame buffer. That's because, although the virtual desktop might
- be an integral number of tiles, the display might not. We'll
- just live with this artifact. */
- pScrn->frameX0 = ROUND_UP(pScrn->frameX0, viewportXRes);
- }
- pScrn->frameX1 = pScrn->frameX0 + pScrn->currentMode->HDisplay - 1;
-
- if (cursorY < middleY) {
- pScrn->frameY0 = ROUND_DOWN(pScrn->frameY0, viewportYRes);
- } else {
- pScrn->frameY0 = ROUND_UP(pScrn->frameY0, viewportYRes);
- }
- pScrn->frameY1 = pScrn->frameY0 + pScrn->currentMode->VDisplay - 1;
-
-
- if (x != pScrn->frameX0 || y != pScrn->frameY0) {
- /* !!! */
- /* We moved the frame from where xf86SetViewport() placed it.
- If we're using a SW cursor, that's okay -- the pointer exists in
- the framebuffer, and those bits are still all aligned. But
- if we're using a HW cursor, then we need to re-align the pointer.
- Call SetCursorPosition() with the appropriate new pointer
- values, adjusted to be wrt the new frame. */
-
- x = pScrn->frameX0;
- y = pScrn->frameY0;
- }
-
- /* ??? Will this work for 1bpp? */
- Base = (y * lineData->pitch + (x*pScrn->bitsPerPixel/8)) / 4;
-
- if ((Base & ~0x000FFFFF) != 0) {
- /* ??? */
- ErrorF("X11: Internal error: LgAdjustFrame: cannot handle overflow\n");
- return;
- }
-
- hwp->writeCrtc(hwp, 0x0C, (Base >> 8) & 0xFF);
- hwp->writeCrtc(hwp, 0x0D, Base & 0xFF);
- tmp = hwp->readCrtc(hwp, 0x1B) & 0xF2;
- tmp |= (Base >> 16) & 0x01;
- tmp |= (Base >> 15) & 0x0C;
- hwp->writeCrtc(hwp, 0x1B, tmp);
- tmp = hwp->readCrtc(hwp, 0x1D) & 0xE7;
- tmp |= (Base >> 16) & 0x18;
- hwp->writeCrtc(hwp, 0x1D, tmp);
+void LgAdjustFrame(ADJUST_FRAME_ARGS_DECL) {
+ SCRN_INFO_PTR(arg);
+ int Base, tmp;
+ CirPtr pCir = CIRPTR(pScrn);
+ vgaHWPtr hwp = VGAHWPTR(pScrn);
+ int cursorX, cursorY;
+ int middleX, middleY;
+ const LgLineDataPtr lineData = &LgLineData[pCir->chip.lg->lineDataIndex];
+ const int viewportXRes =
+ (PCI_CHIP_GD5465 == pCir->Chipset) ?
+ (24 == pScrn->bitsPerPixel ? 24 : 1) :
+ (lineData->width ? 256 : 128)
+ / (24 == pScrn->bitsPerPixel ?
+ 1 : (pScrn->bitsPerPixel >> 3));
+ const int viewportYRes =
+ (PCI_CHIP_GD5465 == pCir->Chipset) ?
+ 1 : (24 == pScrn->bitsPerPixel ? 3 : 1);
+
+ /* Where's the pointer? */
+ miPointerGetPosition(inputInfo.pointer, &cursorX, &cursorY);
+
+ /* Where's the middle of the screen? We want to eventually know
+ which side of the screen the pointer is on. */
+ middleX = (pScrn->frameX1 + pScrn->frameX0) / 2;
+ middleY = (pScrn->frameY1 + pScrn->frameY0) / 2;
+
+ if (cursorX < middleX) {
+ /* Pointer is on left side of screen. Round the frame value down. */
+ pScrn->frameX0 = ROUND_DOWN(pScrn->frameX0, viewportXRes);
+ } else {
+ /* Pointer is on right side of screen. Round the frame value
+ up. A side effect of this rounding up is that we might expose
+ a part of the screen that's actually on the far /left/ of the
+ frame buffer. That's because, although the virtual desktop might
+ be an integral number of tiles, the display might not. We'll
+ just live with this artifact. */
+ pScrn->frameX0 = ROUND_UP(pScrn->frameX0, viewportXRes);
+ }
+ pScrn->frameX1 = pScrn->frameX0 + pScrn->currentMode->HDisplay - 1;
+
+ if (cursorY < middleY) {
+ pScrn->frameY0 = ROUND_DOWN(pScrn->frameY0, viewportYRes);
+ } else {
+ pScrn->frameY0 = ROUND_UP(pScrn->frameY0, viewportYRes);
+ }
+ pScrn->frameY1 = pScrn->frameY0 + pScrn->currentMode->VDisplay - 1;
+
+ if (x != pScrn->frameX0 || y != pScrn->frameY0) {
+ /* !!! */
+ /* We moved the frame from where xf86SetViewport() placed it.
+ If we're using a SW cursor, that's okay -- the pointer exists in
+ the framebuffer, and those bits are still all aligned. But
+ if we're using a HW cursor, then we need to re-align the pointer.
+ Call SetCursorPosition() with the appropriate new pointer
+ values, adjusted to be wrt the new frame. */
+
+ x = pScrn->frameX0;
+ y = pScrn->frameY0;
+ }
+
+ /* ??? Will this work for 1bpp? */
+ Base = (y * lineData->pitch + (x * pScrn->bitsPerPixel / 8)) / 4;
+
+ if ((Base & ~0x000FFFFF) != 0) {
+ /* ??? */
+ ErrorF("X11: Internal error: LgAdjustFrame: cannot handle overflow\n");
+ return;
+ }
+
+ hwp->writeCrtc(hwp, 0x0C, (Base >> 8) & 0xFF);
+ hwp->writeCrtc(hwp, 0x0D, Base & 0xFF);
+ tmp = hwp->readCrtc(hwp, 0x1B) & 0xF2;
+ tmp |= (Base >> 16) & 0x01;
+ tmp |= (Base >> 15) & 0x0C;
+ hwp->writeCrtc(hwp, 0x1B, tmp);
+ tmp = hwp->readCrtc(hwp, 0x1D) & 0xE7;
+ tmp |= (Base >> 16) & 0x18;
+ hwp->writeCrtc(hwp, 0x1D, tmp);
}
/*
@@ -1530,25 +1522,22 @@ LgAdjustFrame(ADJUST_FRAME_ARGS_DECL)
*/
/* Mandatory */
-Bool
-LgEnterVT(VT_FUNC_ARGS_DECL)
-{
- SCRN_INFO_PTR(arg);
- CirPtr pCir = CIRPTR(pScrn);
+Bool LgEnterVT(VT_FUNC_ARGS_DECL) {
+ SCRN_INFO_PTR(arg);
+ CirPtr pCir = CIRPTR(pScrn);
#ifdef LG_DEBUG
- ErrorF("LgEnterVT\n");
+ ErrorF("LgEnterVT\n");
#endif
- /* XXX Shouldn't this be in LeaveVT? */
- /* Disable HW cursor */
- if (pCir->HWCursor)
- LgHideCursor(pScrn);
+ /* XXX Shouldn't this be in LeaveVT? */
+ /* Disable HW cursor */
+ if (pCir->HWCursor)
+ LgHideCursor(pScrn);
- /* Should we re-save the text mode on each VT enter? */
- return LgModeInit(pScrn, pScrn->currentMode);
+ /* Should we re-save the text mode on each VT enter? */
+ return LgModeInit(pScrn, pScrn->currentMode);
}
-
/*
* This is called when VT switching away from the X server. Its job is
* to restore the previous (text) mode.
@@ -1557,26 +1546,23 @@ LgEnterVT(VT_FUNC_ARGS_DECL)
*/
/* Mandatory */
-void
-LgLeaveVT(VT_FUNC_ARGS_DECL)
-{
- SCRN_INFO_PTR(arg);
- vgaHWPtr hwp = VGAHWPTR(pScrn);
- CirPtr pCir = CIRPTR(pScrn);
+void LgLeaveVT(VT_FUNC_ARGS_DECL) {
+ SCRN_INFO_PTR(arg);
+ vgaHWPtr hwp = VGAHWPTR(pScrn);
+ CirPtr pCir = CIRPTR(pScrn);
#ifdef LG_DEBUG
- ErrorF("LgLeaveVT\n");
+ ErrorF("LgLeaveVT\n");
#endif
- /* XXX Shouldn't this be in EnterVT? */
- /* Enable HW cursor */
- if (pCir->HWCursor)
- LgShowCursor(pScrn);
+ /* XXX Shouldn't this be in EnterVT? */
+ /* Enable HW cursor */
+ if (pCir->HWCursor)
+ LgShowCursor(pScrn);
- LgRestore(pScrn);
- vgaHWLock(hwp);
+ LgRestore(pScrn);
+ vgaHWLock(hwp);
}
-
/*
* This is called at the end of each server generation. It restores the
* original (text) mode. It should also unmap the video memory, and free
@@ -1585,138 +1571,124 @@ LgLeaveVT(VT_FUNC_ARGS_DECL)
*/
/* Mandatory */
-static Bool
-LgCloseScreen(CLOSE_SCREEN_ARGS_DECL)
-{
- ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
- vgaHWPtr hwp = VGAHWPTR(pScrn);
- CirPtr pCir = CIRPTR(pScrn);
+static Bool LgCloseScreen(CLOSE_SCREEN_ARGS_DECL) {
+ ScrnInfoPtr pScrn = xf86ScreenToScrn(pScreen);
+ vgaHWPtr hwp = VGAHWPTR(pScrn);
+ CirPtr pCir = CIRPTR(pScrn);
- if(pScrn->vtSema) {
- LgRestore(pScrn);
- if (pCir->HWCursor)
- LgHideCursor(pScrn);
+ if (pScrn->vtSema) {
+ LgRestore(pScrn);
+ if (pCir->HWCursor)
+ LgHideCursor(pScrn);
- vgaHWLock(hwp);
-
- CirUnmapMem(pCir, pScrn->scrnIndex);
- }
+ vgaHWLock(hwp);
+
+ CirUnmapMem(pCir, pScrn->scrnIndex);
+ }
#ifdef HAVE_XAA_H
- if (pCir->AccelInfoRec)
- XAADestroyInfoRec(pCir->AccelInfoRec);
- pCir->AccelInfoRec = NULL;
+ if (pCir->AccelInfoRec)
+ XAADestroyInfoRec(pCir->AccelInfoRec);
+ pCir->AccelInfoRec = NULL;
#endif
- if (pCir->CursorInfoRec)
- xf86DestroyCursorInfoRec(pCir->CursorInfoRec);
- pCir->CursorInfoRec = NULL;
- if (pCir->DGAModes)
- free(pCir->DGAModes);
- pCir->DGAnumModes = 0;
- pCir->DGAModes = NULL;
+ if (pCir->CursorInfoRec)
+ xf86DestroyCursorInfoRec(pCir->CursorInfoRec);
+ pCir->CursorInfoRec = NULL;
+ if (pCir->DGAModes)
+ free(pCir->DGAModes);
+ pCir->DGAnumModes = 0;
+ pCir->DGAModes = NULL;
- pScrn->vtSema = FALSE;
+ pScrn->vtSema = FALSE;
- pScreen->CloseScreen = pCir->CloseScreen;
- return (*pScreen->CloseScreen)(CLOSE_SCREEN_ARGS);
+ pScreen->CloseScreen = pCir->CloseScreen;
+ return (*pScreen->CloseScreen)(CLOSE_SCREEN_ARGS);
}
-
/* Free up any persistent data structures */
/* Optional */
-void
-LgFreeScreen(FREE_SCREEN_ARGS_DECL)
-{
- SCRN_INFO_PTR(arg);
+void LgFreeScreen(FREE_SCREEN_ARGS_DECL) {
+ SCRN_INFO_PTR(arg);
#ifdef LG_DEBUG
- ErrorF("LgFreeScreen\n");
+ ErrorF("LgFreeScreen\n");
#endif
- /*
- * This only gets called when a screen is being deleted. It does not
- * get called routinely at the end of a server generation.
- */
- if (xf86LoaderCheckSymbol("vgaHWFreeHWRec"))
- vgaHWFreeHWRec(pScrn);
- LgFreeRec(pScrn);
+ /*
+ * This only gets called when a screen is being deleted. It does not
+ * get called routinely at the end of a server generation.
+ */
+ if (xf86LoaderCheckSymbol("vgaHWFreeHWRec"))
+ vgaHWFreeHWRec(pScrn);
+ LgFreeRec(pScrn);
}
-
/* Checks if a mode is suitable for the selected chipset. */
/* Optional */
-ModeStatus
-LgValidMode(SCRN_ARG_TYPE arg, DisplayModePtr mode, Bool verbose, int flags)
-{
- int lace;
-
- lace = 1 + ((mode->Flags & V_INTERLACE) != 0);
-
- if ((mode->CrtcHDisplay <= 2048) &&
- (mode->CrtcHSyncStart <= 4096) &&
- (mode->CrtcHSyncEnd <= 4096) &&
- (mode->CrtcHTotal <= 4096) &&
- (mode->CrtcVDisplay <= 2048 * lace) &&
- (mode->CrtcVSyncStart <= 4096 * lace) &&
- (mode->CrtcVSyncEnd <= 4096 * lace) &&
- (mode->CrtcVTotal <= 4096 * lace)) {
- return(MODE_OK);
- }
- return(MODE_BAD);
+ModeStatus LgValidMode(SCRN_ARG_TYPE arg, DisplayModePtr mode, Bool verbose,
+ int flags) {
+ int lace;
+
+ lace = 1 + ((mode->Flags & V_INTERLACE) != 0);
+
+ if ((mode->CrtcHDisplay <= 2048) && (mode->CrtcHSyncStart <= 4096)
+ && (mode->CrtcHSyncEnd <= 4096) && (mode->CrtcHTotal <= 4096)
+ && (mode->CrtcVDisplay <= 2048 * lace)
+ && (mode->CrtcVSyncStart <= 4096 * lace)
+ && (mode->CrtcVSyncEnd <= 4096 * lace)
+ && (mode->CrtcVTotal <= 4096 * lace)) {
+ return (MODE_OK);
+ }
+ return (MODE_BAD);
}
-
/* Do screen blanking */
/* Mandatory */
-static Bool
-LgSaveScreen(ScreenPtr pScreen, int mode)
-{
- CirPtr pCir = CIRPTR(xf86ScreenToScrn(pScreen));
- ScrnInfoPtr pScrn = NULL;
- Bool unblank;
-
- unblank = xf86IsUnblank(mode);
-
- if (pScreen != NULL)
- pScrn = xf86ScreenToScrn(pScreen);
-
- if (pScrn != NULL && pScrn->vtSema) {
- if (unblank)
- /* Power up the palette DAC */
- memwb(0xB0,memrb(0xB0) & 0x7F);
- else
- /* Power down the palette DAC */
- memwb(0xB0,memrb(0xB0) | 0x80);
- }
-
- return vgaHWSaveScreen(pScreen, mode);
+static Bool LgSaveScreen(ScreenPtr pScreen, int mode) {
+ CirPtr pCir = CIRPTR(xf86ScreenToScrn(pScreen));
+ ScrnInfoPtr pScrn = NULL;
+ Bool unblank;
+
+ unblank = xf86IsUnblank(mode);
+
+ if (pScreen != NULL)
+ pScrn = xf86ScreenToScrn(pScreen);
+
+ if (pScrn != NULL && pScrn->vtSema) {
+ if (unblank)
+ /* Power up the palette DAC */
+ memwb(0xB0, memrb(0xB0) & 0x7F);
+ else
+ /* Power down the palette DAC */
+ memwb(0xB0, memrb(0xB0) | 0x80);
+ }
+
+ return vgaHWSaveScreen(pScreen, mode);
}
-static CARD16
-LgSetClock(CirPtr pCir, vgaHWPtr hwp, int freq)
-{
- int ffreq, num, den;
- CARD8 tmp;
+static CARD16 LgSetClock(CirPtr pCir, vgaHWPtr hwp, int freq) {
+ int ffreq, num, den;
+ CARD8 tmp;
- ErrorF("LgSetClock freq=%d.%03dMHz\n", freq / 1000, freq % 1000);
+ ErrorF("LgSetClock freq=%d.%03dMHz\n", freq / 1000, freq % 1000);
- ffreq = freq;
- if (!CirrusFindClock(&ffreq, pCir->MaxClock, &num, &den))
- return 0;
+ ffreq = freq;
+ if (!CirrusFindClock(&ffreq, pCir->MaxClock, &num, &den))
+ return 0;
- ErrorF("LgSetClock: nom=%x den=%x ffreq=%d.%03dMHz\n",
- num, den, ffreq / 1000, ffreq % 1000);
+ ErrorF("LgSetClock: nom=%x den=%x ffreq=%d.%03dMHz\n", num, den,
+ ffreq / 1000, ffreq % 1000);
- /* Set VCLK3. */
- /* The numerator and denominator registers are switched
- around in the Laguna chips. */
- tmp = hwp->readSeq(hwp, 0x0E);
- hwp->writeSeq(hwp, 0x0E, (tmp & 0x80) | den);
- hwp->writeSeq(hwp, 0x1E, num);
+ /* Set VCLK3. */
+ /* The numerator and denominator registers are switched
+ around in the Laguna chips. */
+ tmp = hwp->readSeq(hwp, 0x0E);
+ hwp->writeSeq(hwp, 0x0E, (tmp & 0x80) | den);
+ hwp->writeSeq(hwp, 0x1E, num);
- return (den << 8) | num;
+ return (den << 8) | num;
}
/*
@@ -1724,70 +1696,62 @@ LgSetClock(CirPtr pCir, vgaHWPtr hwp, int freq)
*
* Sets VESA Display Power Management Signaling (DPMS) Mode.
*/
-static void
-LgDisplayPowerManagementSet(ScrnInfoPtr pScrn, int PowerManagementMode,
- int flags)
-{
- unsigned char sr01, cr1a;
- vgaHWPtr hwp;
+static void LgDisplayPowerManagementSet(ScrnInfoPtr pScrn,
+ int PowerManagementMode, int flags) {
+ unsigned char sr01, cr1a;
+ vgaHWPtr hwp;
#ifdef LG_DEBUG
- ErrorF("LgDisplayPowerManagementSet: %d\n", PowerManagementMode);
+ ErrorF("LgDisplayPowerManagementSet: %d\n", PowerManagementMode);
#endif
- hwp = VGAHWPTR(pScrn);
-
- switch (PowerManagementMode) {
- case DPMSModeOn:
- /* Screen: On; HSync: On, VSync: On */
- sr01 = 0x00;
- cr1a = 0x00;
- break;
- case DPMSModeStandby:
- /* Screen: Off; HSync: Off, VSync: On */
- sr01 = 0x20;
- cr1a = 0x08;
- break;
- case DPMSModeSuspend:
- /* Screen: Off; HSync: On, VSync: Off */
- sr01 = 0x20;
- cr1a = 0x04;
- break;
- case DPMSModeOff:
- /* Screen: Off; HSync: Off, VSync: Off */
- sr01 = 0x20;
- cr1a = 0x0c;
- break;
- default:
- return;
- }
-
- sr01 |= hwp->readSeq(hwp, 0x01) & ~0x20;
- hwp->writeSeq(hwp, 0x01, sr01);
- cr1a |= hwp->readCrtc(hwp, 0x1A) & ~0x0C;
- hwp->writeCrtc(hwp, 0x1A, cr1a);
+ hwp = VGAHWPTR(pScrn);
+
+ switch (PowerManagementMode) {
+ case DPMSModeOn:
+ /* Screen: On; HSync: On, VSync: On */
+ sr01 = 0x00;
+ cr1a = 0x00;
+ break;
+ case DPMSModeStandby:
+ /* Screen: Off; HSync: Off, VSync: On */
+ sr01 = 0x20;
+ cr1a = 0x08;
+ break;
+ case DPMSModeSuspend:
+ /* Screen: Off; HSync: On, VSync: Off */
+ sr01 = 0x20;
+ cr1a = 0x04;
+ break;
+ case DPMSModeOff:
+ /* Screen: Off; HSync: Off, VSync: Off */
+ sr01 = 0x20;
+ cr1a = 0x0c;
+ break;
+ default:
+ return;
+ }
+
+ sr01 |= hwp->readSeq(hwp, 0x01) & ~0x20;
+ hwp->writeSeq(hwp, 0x01, sr01);
+ cr1a |= hwp->readCrtc(hwp, 0x1A) & ~0x0C;
+ hwp->writeCrtc(hwp, 0x1A, cr1a);
}
#define minb(p) MMIO_IN8(hwp->MMIOBase, (p))
#define moutb(p,v) MMIO_OUT8(hwp->MMIOBase, (p),(v))
-static void
-mmioWriteCrtc(vgaHWPtr hwp, CARD8 index, CARD8 value)
-{
- moutb(index << 2, value);
+static void mmioWriteCrtc(vgaHWPtr hwp, CARD8 index, CARD8 value) {
+ moutb(index << 2, value);
}
-static CARD8
-mmioReadCrtc(vgaHWPtr hwp, CARD8 index)
-{
- return minb(index << 2);
+static CARD8 mmioReadCrtc(vgaHWPtr hwp, CARD8 index) {
+ return minb(index << 2);
}
-static void
-lg_vgaHWSetMmioFunc(vgaHWPtr hwp, CARD8 *base)
-{
- hwp->writeCrtc = mmioWriteCrtc;
- hwp->readCrtc = mmioReadCrtc;
- hwp->MMIOBase = base;
- hwp->MMIOOffset = 0;
+static void lg_vgaHWSetMmioFunc(vgaHWPtr hwp, CARD8 *base) {
+ hwp->writeCrtc = mmioWriteCrtc;
+ hwp->readCrtc = mmioReadCrtc;
+ hwp->MMIOBase = base;
+ hwp->MMIOOffset = 0;
}
--
2.17.1
More information about the xorg-devel
mailing list