2.6.35-rc4 ppc crash when loading radeon modeset=1

Michel Dänzer michel at daenzer.net
Tue Jul 13 07:19:27 PDT 2010


On Die, 2010-07-13 at 16:03 +0200, jjDaNiMoTh wrote: 
> 
> When trying new 2.6.35-rc4, our kernel team (ArchLinuxPPC) has tried
> to setup KMS acceleration for radeon based machine.
> We have removed radeonfb, and all others framebuffer driver, and added
> fbcon and KMS enabled by default for radeon driver.
> 
> With a clean start, the screen freeze, when the control pass from
> yaboot to kernel.
> 
> If we start with video=fbcon (or video=radeondrmfb), we could reach
> the loading modules point, [...]

Which framebuffer device (if any) is it trying to initialize otherwise?
OFfb? The first paragraph above implies none, but then I'm not sure why
the video= parameters would make any difference.


> Jul 13 15:31:39 jim kernel: [drm] Initialized drm 1.1.0 20060810
> Jul 13 15:31:39 jim kernel: [drm] radeon kernel modesetting enabled.
> Jul 13 15:31:39 jim kernel: [drm] initializing kernel modesetting
> (RV350 0x1002:0x4E50).
> Jul 13 15:31:39 jim kernel: [drm] register mmio base: 0xB0000000
> Jul 13 15:31:39 jim kernel: [drm] register mmio size: 65536
> Jul 13 15:31:39 jim kernel: [drm] Using generic clock info
> Jul 13 15:31:39 jim kernel: agpgart-uninorth 0000:00:0b.0: putting AGP
> V2 device into 4x mode
> Jul 13 15:31:39 jim kernel: radeon 0000:00:10.0: putting AGP V2 device
> into 4x mode
> Jul 13 15:31:39 jim kernel: radeon 0000:00:10.0: GTT: 256M 0x00000000
> - 0x0FFFFFFF
> Jul 13 15:31:39 jim kernel: [drm] Generation 2 PCI interface, using
> max accessible memory
> Jul 13 15:31:39 jim kernel: radeon 0000:00:10.0: VRAM: 64M 0xB8000000
> - 0xBBFFFFFF (64M used)
> Jul 13 15:31:39 jim kernel: [drm] radeon: irq initialized.
> Jul 13 15:31:39 jim kernel: [drm] Detected VRAM RAM=64M, BAR=128M
> Jul 13 15:31:39 jim kernel: [drm] RAM width 128bits DDR
> Jul 13 15:31:39 jim kernel: [TTM] Zone  kernel: Available graphics
> memory: 384990 kiB.
> Jul 13 15:31:39 jim kernel: [TTM] Zone highmem: Available graphics
> memory: 516062 kiB.
> Jul 13 15:31:39 jim kernel: [TTM] Initializing pool allocator.
> Jul 13 15:31:39 jim kernel: [drm] radeon: 64M of VRAM memory ready
> Jul 13 15:31:39 jim kernel: [drm] radeon: 256M of GTT memory ready.
> Jul 13 15:31:39 jim kernel: [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
> Jul 13 15:31:39 jim kernel: [drm] Loading R300 Microcode
> Jul 13 15:31:39 jim kernel: [drm] radeon: ring at 0x0000000000000000
> Jul 13 15:31:39 jim kernel: [drm] ring test succeeded in 3 usecs
> Jul 13 15:31:39 jim kernel: [drm] radeon: ib pool ready.

So far, so good.

> Jul 13 15:31:40 jim kernel: GPU lockup (waiting for 0x00000001 last
> fence id 0x00000000)

The GPU locks up, and things go downhill from there...

Does KMS work better with radeon.agpmode=1 (or 2 or -1)?


-- 
Earthling Michel Dänzer           |                http://www.vmware.com
Libre software enthusiast         |          Debian, X and DRI developer


More information about the xorg-driver-ati mailing list