ati driver dual head 2nd monitor incorrect resolution
Alex Deucher
alexdeucher at gmail.com
Tue Oct 12 12:22:13 PDT 2004
On Tue, 12 Oct 2004 12:10:36 -0700 (PDT), John H. <mistamaila at yahoo.com> wrote:
> If I reverse card0 and card1 in the two screen
> sections, it gives me both monitors, in clone mode
> again, at 1024x768.
>
> If I left it as you suggested(where 15inch said out of
> range), xinerama seemed to be being used(applications
> could appear in the other monitor) but 19 inch was
> only 1024x768 and 15 inch was out of range.
try switching the monitors; the plugs themselves.
>
>
> --- "John H." <mistamaila at yahoo.com> wrote:
>
> > ok, that makes it so
> >
> > 19 inch CRT is at 1024x768
> > 15inch FP says out of range(will not display)
> > here is X log
> >
> > _XSERVTransSocketOpenCOTSServer: Unable to open
> > socket
> > for inet6
> > _XSERVTransOpen: transport open failed for
> > inet6/home:0
> > _XSERVTransMakeAllCOTSServerListeners: failed to
> > open
> > listener for inet6
> >
> > X Window System Version 6.8.1
> > Release Date: 17 September 2004
> > X Protocol Version 11, Revision 0, Release 6.8.1
> > Build Operating System: Linux 2.6.8.1 i686 [ELF]
> > Current Operating System: Linux home 2.6.8.1 #2 Sat
> > Sep 25 23:24:14 CDT 2004 i686
> > Build Date: 09 October 2004
> > Build Host: home
> >
> > Before reporting problems, check http://wiki.X.Org
> > to make sure that you have the latest version.
> > Module Loader present
> > OS Kernel: Linux version 2.6.8.1 (root at home) (gcc
> > version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2
> > Sat
> > Sep 25 23:24:14 CDT 2004
> > Markers: (--) probed, (**) from config file, (==)
> > default setting,
> > (++) from command line, (!!) notice, (II)
> > informational,
> > (WW) warning, (EE) error, (NI) not implemented,
> > (??)
> > unknown.
> > (==) Log file: "/var/log/Xorg.0.log", Time: Tue Oct
> > 12
> > 14:07:06 2004
> > (==) Using config file: "/etc/X11/xorg.conf"
> > (==) ServerLayout "X.org Configured"
> > (**) |-->Screen "Screen0" (0)
> > (**) | |-->Monitor "LCD"
> > (**) | |-->Device "Card0"
> > (**) |-->Screen "Screen1" (1)
> > (**) | |-->Monitor "CRT"
> > (**) | |-->Device "Card1"
> > (**) |-->Input Device "Mouse0"
> > (**) |-->Input Device "Keyboard0"
> > (**) FontPath set to "unix/:7100"
> > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> > (**) ModulePath set to "/usr/X11R6/lib/modules"
> > (**) Option "Xinerama"
> > (**) Xinerama: enabled
> > (WW) Open APM failed (/dev/apm_bios) (No such
> > device)
> > (II) Module ABI versions:
> > X.Org ANSI C Emulation: 0.2
> > X.Org Video Driver: 0.7
> > X.Org XInput driver : 0.4
> > X.Org Server Extension : 0.2
> > X.Org Font Renderer : 0.4
> > (II) Loader running on linux
> > (II) LoadModule: "bitmap"
> > (II) Loading
> > /usr/X11R6/lib/modules/fonts/libbitmap.a
> > (II) Module bitmap: vendor="X.Org Foundation"
> > compiled for 6.8.1, module version = 1.0.0
> > Module class: X.Org Font Renderer
> > ABI class: X.Org Font Renderer, version 0.4
> > (II) Loading font Bitmap
> > (II) LoadModule: "pcidata"
> > (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> > (II) Module pcidata: vendor="X.Org Foundation"
> > compiled for 6.8.1, module version = 1.0.0
> > ABI class: X.Org Video Driver, version 0.7
> > (--) using VT number 7
> >
> > (II) PCI: Probing config type using method 1
> > (II) PCI: Config type is 1
> > (II) PCI: stages = 0x03, oldVal1 = 0x00000000,
> > mode1Res1 = 0x80000000
> > (II) PCI: PCI scan (all values are in hex)
> > (II) PCI: 00:00:0: chip 1106,3116 card 1509,9012 rev
> > 00 class 06,00,00 hdr 00
> > (II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev
> > 00 class 06,04,00 hdr 01
> > (II) PCI: 00:08:0: chip 1102,0004 card 1102,1007 rev
> > 04 class 04,01,00 hdr 80
> > (II) PCI: 00:08:1: chip 1102,7003 card 1102,0060 rev
> > 04 class 09,80,00 hdr 80
> > (II) PCI: 00:08:2: chip 1102,4001 card 1102,0010 rev
> > 04 class 0c,00,10 hdr 80
> > (II) PCI: 00:0a:0: chip 109e,036e card bd11,1200 rev
> > 11 class 04,00,00 hdr 80
> > (II) PCI: 00:0a:1: chip 109e,0878 card bd11,1200 rev
> > 11 class 04,80,00 hdr 80
> > (II) PCI: 00:0b:0: chip 10ec,8139 card 1509,9012 rev
> > 10 class 02,00,00 hdr 00
> > (II) PCI: 00:10:0: chip 1106,3038 card 1509,9012 rev
> > 80 class 0c,03,00 hdr 80
> > (II) PCI: 00:10:1: chip 1106,3038 card 1509,9012 rev
> > 80 class 0c,03,00 hdr 80
> > (II) PCI: 00:10:2: chip 1106,3038 card 1509,9012 rev
> > 80 class 0c,03,00 hdr 80
> > (II) PCI: 00:10:3: chip 1106,3104 card 1509,9012 rev
> > 82 class 0c,03,20 hdr 00
> > (II) PCI: 00:11:0: chip 1106,3177 card 1509,9012 rev
> > 00 class 06,01,00 hdr 80
> > (II) PCI: 00:11:1: chip 1106,0571 card 1509,9012 rev
> > 06 class 01,01,8a hdr 00
> > (II) PCI: 01:00:0: chip 1002,4151 card 174b,7c20 rev
> > 00 class 03,00,00 hdr 80
> > (II) PCI: 01:00:1: chip 1002,4171 card 174b,7c21 rev
> > 00 class 03,80,00 hdr 00
> > (II) PCI: End of PCI scan
> > (II) Host-to-PCI bridge:
> > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL:
> > 0x0008 (VGA_EN is set)
> > (II) Bus 0 I/O range:
> > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> > (II) Bus 0 non-prefetchable memory range:
> > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > (II) Bus 0 prefetchable memory range:
> > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > (II) PCI-to-PCI bridge:
> > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL:
> > 0x000c (VGA_EN is set)
> > (II) Bus 1 I/O range:
> > [0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
> > [1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B]
> > [2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
> > [3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B]
> > (II) Bus 1 non-prefetchable memory range:
> > [0] -1 0 0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
> > (II) Bus 1 prefetchable memory range:
> > [0] -1 0 0xc0000000 - 0xdfffffff (0x20000000) MX[B]
> > (II) PCI-to-ISA bridge:
> > (II) Bus -1: bridge is at (0:17:0), (0,-1,-1),
> > BCTRL:
> > 0x0008 (VGA_EN is set)
> > (--) PCI: (0:10:0) Brooktree Corporation Bt878 Video
> > Capture rev 17, Mem @ 0xe7004000/12
> > (--) PCI:*(1:0:0) ATI Technologies Inc RV350 AQ
> > [Radeon 9600] rev 0, Mem @ 0xc0000000/28,
> > 0xe5000000/16, I/O @ 0xc000/8
> > (--) PCI: (1:0:1) ATI Technologies Inc RV350 AQ
> > [Radeon 9600] (Secondary) rev 0, Mem @
> > 0xd0000000/28,
> > 0xe5010000/16
> > (II) Addressable bus resource ranges are
> > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
> > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
> > (II) OS-reported resource ranges:
> > [0] -1 0 0xffe00000 - 0xffffffff (0x200000)
> > MX[B](B)
> > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000)
> > MX[B]E(B)
> > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> > (II) PCI Memory resource overlap reduced 0xe0000000
> > from 0xe3ffffff to 0xdfffffff
> > (II) Active PCI resource ranges:
> > [0] -1 0 0xe7008000 - 0xe70080ff (0x100) MX[B]
> > [1] -1 0 0xe7006000 - 0xe70060ff (0x100) MX[B]
> > [2] -1 0 0xe7005000 - 0xe7005fff (0x1000) MX[B]
> > [3] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
> > [4] -1 0 0xe7007000 - 0xe70077ff (0x800) MX[B]
> > [5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> > [6] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> > [7] -1 0 0xc0000000 - 0xcfffffff (0x10000000)
> > MX[B](B)
> > [8] -1 0 0xe7004000 - 0xe7004fff (0x1000) MX[B](B)
> > [9] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[B]
> > [10] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
> > [11] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
> > [12] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
> > [13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
> > [14] -1 0 0x0000d400 - 0x0000d407 (0x8) IX[B]
> > [15] -1 0 0x0000d000 - 0x0000d03f (0x40) IX[B]
> > [16] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
> > (II) Inactive PCI resource ranges:
> > [0] -1 0 0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
> > [1] -1 0 0xd0000000 - 0xdfffffff (0x10000000)
> > MX[B](B)
> > (II) Active PCI resource ranges after removing
> > overlaps:
> > [0] -1 0 0xe7008000 - 0xe70080ff (0x100) MX[B]
> > [1] -1 0 0xe7006000 - 0xe70060ff (0x100) MX[B]
> > [2] -1 0 0xe7005000 - 0xe7005fff (0x1000) MX[B]
> > [3] -1 0 0xe7000000 - 0xe7003fff (0x4000) MX[B]
> > [4] -1 0 0xe7007000 - 0xe70077ff (0x800) MX[B]
> > [5] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
> > [6] -1 0 0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
> > [7] -1 0 0xc0000000 - 0xcfffffff (0x10000000)
> > MX[B](B)
> >
> === message truncated ===
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Mail Address AutoComplete - You start. We finish.
> http://promotions.yahoo.com/new_mail
>
More information about the xorg
mailing list