Crash during *first* startup after update to 6.8.0 (i855 Chipset)
Joachim Glauche
webmaster at joaz.de
Sat Sep 25 03:43:11 PDT 2004
Hey, this helped! Thank you.
Regards,
Joachim Glauche
Dave Airlie wrote:
>don't build both i830 and i915 into the kernel.. just i915...
>
>
>On Fri, 24 Sep 2004 13:50:30 +0200, Joachim Glauche <webmaster at joaz.de> wrote:
>
>
>>Hello,
>>
>>I just upgraded to xorg 6.8.0 on my centrino notebook.
>>When I want to start "startx" the first time (after reboot), it starts X
>>and before loading the XSESSION (tried both Xsession and kde-3.3.0) X
>>crashes. At this time I see the graphic screen but cannot do anything.
>>Switching to console is not possible ;(
>>
>>The SSHD is still running and I can login over an other computer. "ps
>>aux" says me that no X server is running.
>>In the ssh shell I can start the Xserver with "startx" again and it will
>>run! After that, I can switch to the console on my laptop again. But at
>>this time the console fonts are messed up. I can see that I am writing
>>something but I can't read it.
>>
>>If X is running one time after booting, I can start it as often I want
>>to -> no crash.
>>
>>dmesg prints out that after starting X the first time:
>>
>>mtrr: base(0xb0020000) is not aligned on a size(0x300000) boundary
>>[drm:i830_dma_initialize] *ERROR* can not find dma buffer map!
>>[drm:i830_irq_emit] *ERROR* i830_irq_emit called without lock held
>>Unable to handle kernel paging request at virtual address f01fdc48
>> printing eip:
>>c03cbb76
>>*pde = 00000000
>>Oops: 0002 [#1]
>>PREEMPT
>>Modules linked in: ipw2100 ieee80211 ieee80211_crypt arc4 snd_seq_oss
>>snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_intel8x0
>>snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart
>>snd_rawmidi snd_seq_device snd soundcore
>>CPU: 0
>>EIP: 0060:[<c03cbb76>] Not tainted VLI
>>EFLAGS: 00013212 (2.6.9-rc2-mm2)
>>EIP is at i830_dma_quiescent+0x26/0xb0
>>eax: 001f1510 ebx: 00000000 ecx: f000c737 edx: f000c738
>>esi: c0703c20 edi: 00000000 ebp: 00000000 esp: db8dfed0
>>ds: 007b es: 007b ss: 0068
>>Process X (pid: 7737, threadinfo=db8de000 task=dd1cb930)
>>Stack: c0703c20 db8dff0c bffff218 c03cc500 c0703c20 c03cc50f c0703c20
>>c03c4ff4
>> c0703c20 c070432c c0704334 00000000 00000000 00000000 00000000
>>00000001
>> 0000000a 00000000 dd1cb930 c011c800 00000000 00000000 dd7b2244
>>dd7b22e4
>>Call Trace:
>> [<c03cc500>] i830_driver_dma_quiescent+0x0/0x20
>> [<c03cc50f>] i830_driver_dma_quiescent+0xf/0x20
>> [<c03c4ff4>] i830_lock+0x264/0x310
>> [<c011c800>] default_wake_function+0x0/0x20
>> [<c011c800>] default_wake_function+0x0/0x20
>> [<c03c4d14>] i830_ioctl+0xe4/0x160
>> [<c016d9e0>] sys_ioctl+0x100/0x270
>> [<c010524b>] syscall_call+0x7/0xb
>>Code: 90 8d 74 26 00 56 53 83 ec 0c 8b 74 24 18 8b 9e 08 07 00 00 89 34
>>24 e8 09 df ff ff 83 7b 28 0f 7e 738b 43 24 8b 53 1c 8b 4b 0c <c7> 04 10
>>01 00 00 02 83 c0 04 21 c8 c7 04 10 00 00 80 03 83 c0
>>
>>I attached the full dmesg output to this mail.
>>
>>I hope anyone can help me. If you need some info (strace of something?)
>>then ask me.
>>
>>Regards,
>>Joachim Glauche
>>
>>
>>
>>Linux version 2.6.9-rc2-mm2 (root at voyager) (gcc version 3.3.4 20040623 (Gentoo Linux 3.3.4-r1, ssp-3.3.2-2, pie-8.7.6)) #1 Fri Sep 24 02:23:25 CEST 2004
>>BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000001eff0000 (usable)
>> BIOS-e820: 000000001eff0000 - 000000001effffc0 (ACPI data)
>> BIOS-e820: 000000001effffc0 - 000000001f000000 (ACPI NVS)
>> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
>> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>>495MB LOWMEM available.
>>On node 0 totalpages: 126960
>> DMA zone: 4096 pages, LIFO batch:1
>> Normal zone: 122864 pages, LIFO batch:16
>> HighMem zone: 0 pages, LIFO batch:1
>>DMI 2.3 present.
>>ACPI: RSDP (v000 OID_00 ) @ 0x000e6010
>>ACPI: RSDT (v001 INSYDE RSDT_000 0x00000001 _CSI 0x00010101) @ 0x1effa5b0
>>ACPI: FADT (v001 COMPAL DCL51_00 0x00000100 _CSI 0x00010101) @ 0x1efffb00
>>ACPI: BOOT (v001 INSYDE BOOT_000 0x00000001 _CSI 0x00010101) @ 0x1efffb90
>>ACPI: DBGP (v001 INSYDE DBGP_000 0x00000001 _CSI 0x00010101) @ 0x1efffbc0
>>ACPI: SSDT (v001 INSYDE GV3Ref 0x00002000 INTL 0x20021002) @ 0x1effa5f0
>>ACPI: DSDT (v001 ACER TM290 0x00000006 MSFT 0x0100000e) @ 0x00000000
>>Built 1 zonelists
>>Initializing CPU#0
>>Kernel command line: root=/dev/hda3
>>PID hash table entries: 2048 (order: 11, 32768 bytes)
>>Detected 1399.191 MHz processor.
>>Using tsc for high-res timesource
>>Console: colour VGA+ 80x25
>>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>>Memory: 496260k/507840k available (4575k kernel code, 11040k reserved, 1237k data, 196k init, 0k highmem)
>>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>>Calibrating delay loop... 2768.89 BogoMIPS (lpj=1384448)
>>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>>CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000
>>CPU: After vendor identify, caps: a7e9fbbf 00000000 00000000 00000000
>>CPU: L1 I cache: 32K, L1 D cache: 32K
>>CPU: L2 cache: 1024K
>>CPU: After all inits, caps: a7e9fbbf 00000000 00000000 00000040
>>Intel machine check architecture supported.
>>Intel machine check reporting enabled on CPU#0.
>>CPU: Intel(R) Pentium(R) M processor 1400MHz stepping 05
>>Enabling fast FPU save and restore... done.
>>Enabling unmasked SIMD FPU exception support... done.
>>Checking 'hlt' instruction... OK.
>>ACPI: IRQ9 SCI: Edge set to Level Trigger.
>>NET: Registered protocol family 16
>>PCI: PCI BIOS revision 2.10 entry at 0xe9824, last bus=1
>>PCI: Using configuration type 1
>>mtrr: v2.0 (20020519)
>>ACPI: Subsystem revision 20040816
>>ACPI: Interpreter enabled
>>ACPI: Using PIC for interrupt routing
>>ACPI: PCI Root Bridge [PCI0] (00:00)
>>PCI: Probing PCI hardware (bus 00)
>>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>>PCI: Transparent bridge - 0000:00:1e.0
>>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>>ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *11
>>ACPI: PCI Interrupt Link [LNKB] (IRQs 10) *5
>>ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *0, disabled.
>>ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled.
>>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *11
>>ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *11
>>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *11
>>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>>ACPI: Embedded Controller [EC0] (gpe 28)
>>SCSI subsystem initialized
>>Linux Kernel Card Services
>> options: [pci] [cardbus] [pm]
>>usbcore: registered new driver usbfs
>>usbcore: registered new driver hub
>>PCI: Using ACPI for IRQ routing
>>** PCI interrupts are no longer routed automatically. If this
>>** causes a device to stop working, it is probably because the
>>** driver failed to call pci_enable_device(). As a temporary
>>** workaround, the "pci=routeirq" argument restores the old
>>** behavior. If this argument makes the device work again,
>>** please email the output of "lspci" to bjorn.helgaas at hp.com
>>** so I can fix the driver.
>>NET: Registered protocol family 23
>>CacheFS: general fs caching v0.1 registered
>>Simple Boot Flag at 0x37 set to 0x80
>>IA-32 Microcode Update Driver: v1.14 <tigran at veritas.com>
>>devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
>>devfs: boot_options: 0x1
>>Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
>>NTFS driver 2.1.18-WIP [Flags: R/W].
>>SGI XFS with no debug enabled
>>Initializing Cryptographic API
>>vesafb: probe of vesafb0 failed with error -6
>>ACPI: AC Adapter [ACAD] (on-line)
>>ACPI: Battery Slot [BAT1] (battery present)
>>ACPI: Power Button (FF) [PWRF]
>>ACPI: Lid Switch [LID]
>>ACPI: Sleep Button (CM) [SLPB]
>>ACPI: Processor [CPU0] (supports C1 C2 C3, 8 throttling states)
>>Real Time Clock Driver v1.12
>>hw_random: RNG not detected
>>Linux agpgart interface v0.100 (c) Dave Jones
>>agpgart: Detected an Intel 855 Chipset.
>>agpgart: Maximum main memory to use for agp memory: 424M
>>agpgart: Detected 16252K stolen memory.
>>agpgart: AGP aperture is 128M @ 0xb0000000
>>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>>[drm] Initialized i830 1.3.2 20021108 on minor 0: Intel Corp. 82852/855GM Integrated Graphics Device
>>PCI: Enabling device 0000:00:02.1 (0000 -> 0002)
>>[drm] Initialized i830 1.3.2 20021108 on minor 1: Intel Corp. 82852/855GM Integrated Graphics Device (#2)
>>ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>>[drm] Initialized i915 1.1.0 20040405 on minor 2: Intel Corp. 82852/855GM Integrated Graphics Device
>>[drm] Initialized i915 1.1.0 20040405 on minor 3: Intel Corp. 82852/855GM Integrated Graphics Device (#2)
>>Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).
>>ACPI: PS/2 Keyboard Controller [KBC0] at I/O 0x60, 0x64, irq 1
>>ACPI: PS/2 Mouse Controller [MSE0] at irq 12
>>i8042.c: Detected active multiplexing controller, rev 1.1.
>>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>>serio: i8042 KBD port at 0x60,0x64 irq 1
>>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
>>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 10 (level, low) -> IRQ 10
>>parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
>>loop: loaded (max 8 devices)
>>PPP generic driver version 2.4.2
>>8139too Fast Ethernet driver 0.9.27
>>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 10 (level, low) -> IRQ 10
>>eth0: RealTek RTL8139 at 0xc000, 00:02:3f:14:9c:c5, IRQ 10
>>eth0: Identified 8139 chip type 'RTL-8101'
>>Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
>>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>>ICH4: IDE controller at PCI slot 0000:00:1f.1
>>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 10 (level, low) -> IRQ 10
>>ICH4: chipset revision 3
>>ICH4: not 100% native mode: will probe irqs later
>> ide0: BM-DMA at 0x1100-0x1107, BIOS settings: hda:DMA, hdb:pio
>> ide1: BM-DMA at 0x1108-0x110f, BIOS settings: hdc:DMA, hdd:pio
>>Probing IDE interface ide0...
>>hda: IC25N060ATMR04-0, ATA DISK drive
>>Using anticipatory io scheduler
>>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>>Probing IDE interface ide1...
>>hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
>>ide1 at 0x170-0x177,0x376 on irq 15
>>Probing IDE interface ide2...
>>ide2: Wait for ready failed before probe !
>>Probing IDE interface ide3...
>>ide3: Wait for ready failed before probe !
>>Probing IDE interface ide4...
>>ide4: Wait for ready failed before probe !
>>Probing IDE interface ide5...
>>ide5: Wait for ready failed before probe !
>>hda: max request size: 1024KiB
>>hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(33)
>>hda: cache flushes supported
>> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
>>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>>Uniform CD-ROM driver Revision: 3.20
>>ohci1394: $Rev: 1226 $ Ben Collins <bcollins at debian.org>
>>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 10 (level, low) -> IRQ 10
>>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[e0001800-e0001fff] Max Packet=[2048]
>>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 10 (level, low) -> IRQ 10
>>ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller
>>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>>ehci_hcd 0000:00:1d.7: irq 10, pci mem 0xf0080000
>>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>>ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
>>hub 1-0:1.0: USB hub found
>>hub 1-0:1.0: 6 ports detected
>>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>>USB Universal Host Controller Interface driver v2.2
>>ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 10 (level, low) -> IRQ 10
>>uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
>>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>>uhci_hcd 0000:00:1d.0: irq 10, io base 0x1200
>>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>>hub 2-0:1.0: USB hub found
>>hub 2-0:1.0: 2 ports detected
>>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 10 (level, low) -> IRQ 10
>>uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
>>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>>uhci_hcd 0000:00:1d.1: irq 10, io base 0x1600
>>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>>hub 3-0:1.0: USB hub found
>>hub 3-0:1.0: 2 ports detected
>>ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 10 (level, low) -> IRQ 10
>>uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3
>>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>>uhci_hcd 0000:00:1d.2: irq 10, io base 0x1700
>>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>>hub 4-0:1.0: USB hub found
>>hub 4-0:1.0: 2 ports detected
>>usbcore: registered new driver usblp
>>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>>Initializing USB Mass Storage driver...
>>usbcore: registered new driver usb-storage
>>USB Mass Storage support registered.
>>usbcore: registered new driver usbhid
>>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>>mice: PS/2 mouse device common for all mice
>>input: AT Translated Set 2 keyboard on isa0060/serio0
>>input: PS/2 Generic Mouse on isa0060/serio4
>>i2c /dev entries driver
>>Linux telephony interface: v1.00
>>$Id: ixj.c,v 4.7 2001/08/13 06:19:33 craigs Exp $
>>NET: Registered protocol family 2
>>IP: routing cache hash table of 4096 buckets, 32Kbytes
>>TCP: Hash tables configured (established 32768 bind 65536)
>>IPv4 over IPv4 tunneling driver
>>GRE over IPv4 tunneling driver
>>ip_tables: (C) 2000-2002 Netfilter core team
>>ipt_recent v0.3.1: Stephen Frost <sfrost at snowman.net>. http://snowman.net/projects/ipt_recent/
>>arp_tables: (C) 2002 David S. Miller
>>NET: Registered protocol family 1
>>NET: Registered protocol family 10
>>IPv6 over IPv4 tunneling driver
>>ip6_tables: (C) 2000-2002 Netfilter core team
>>registering ipv6 mark target
>>NET: Registered protocol family 17
>>speedstep-centrino: found "Intel(R) Pentium(R) M processor 1400MHz": max frequency: 1400000kHz
>>ACPI: (supports S0 S1 S3 S4 S5)
>>ACPI wakeup devices:
>>ELAN USB1 USB2 USB3 EUSB MODM
>>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>>CacheFS: Wrong magic number on cache
>>ReiserFS: hda3: found reiserfs format "3.6" with standard journal
>>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f4344003347]
>>ReiserFS: hda3: using ordered data mode
>>ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>>ReiserFS: hda3: checking transaction log (hda3)
>>ReiserFS: hda3: replayed 379 transactions in 17 seconds
>>ReiserFS: hda3: Using r5 hash to sort names
>>VFS: Mounted root (reiserfs filesystem) readonly.
>>Mounted devfs on /dev
>>Freeing unused kernel memory: 196k freed
>>Adding 506036k swap on /dev/hda2. Priority:-1 extents:1
>>ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 10 (level, low) -> IRQ 10
>>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>>intel8x0_measure_ac97_clock: measured 49492 usecs
>>intel8x0: clocking to 48000
>>ieee80211_crypt: registered algorithm 'NULL'
>>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, 0.54
>>ipw2100: Copyright(c) 2003-2004 Intel Corporation
>>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 10 (level, low) -> IRQ 10
>>ipw2100: 0000:01:02.0: Detected at mem: 0xE0000000-0xE0000FFF -> dfa3c000, irq: 10
>>eth1: Using hotplug firmware load.
>>eth1: Radio is disabled by RF switch
>>eth1: Bound to 0000:01:02.0
>>Disabled Privacy Extensions on device c064f600(lo)
>>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>>spurious 8259A interrupt: IRQ7.
>>eth0: no IPv6 routers present
>>nfs warning: mount version older than kernel
>>mtrr: base(0xb0020000) is not aligned on a size(0x300000) boundary
>>[drm:i830_dma_initialize] *ERROR* can not find dma buffer map!
>>[drm:i830_irq_emit] *ERROR* i830_irq_emit called without lock held
>>Unable to handle kernel paging request at virtual address f01fdc48
>> printing eip:
>>c03cbb76
>>*pde = 00000000
>>Oops: 0002 [#1]
>>PREEMPT
>>Modules linked in: ipw2100 ieee80211 ieee80211_crypt arc4 snd_seq_oss snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore
>>CPU: 0
>>EIP: 0060:[<c03cbb76>] Not tainted VLI
>>EFLAGS: 00013212 (2.6.9-rc2-mm2)
>>EIP is at i830_dma_quiescent+0x26/0xb0
>>eax: 001f1510 ebx: 00000000 ecx: f000c737 edx: f000c738
>>esi: c0703c20 edi: 00000000 ebp: 00000000 esp: db8dfed0
>>ds: 007b es: 007b ss: 0068
>>Process X (pid: 7737, threadinfo=db8de000 task=dd1cb930)
>>Stack: c0703c20 db8dff0c bffff218 c03cc500 c0703c20 c03cc50f c0703c20 c03c4ff4
>> c0703c20 c070432c c0704334 00000000 00000000 00000000 00000000 00000001
>> 0000000a 00000000 dd1cb930 c011c800 00000000 00000000 dd7b2244 dd7b22e4
>>Call Trace:
>> [<c03cc500>] i830_driver_dma_quiescent+0x0/0x20
>> [<c03cc50f>] i830_driver_dma_quiescent+0xf/0x20
>> [<c03c4ff4>] i830_lock+0x264/0x310
>> [<c011c800>] default_wake_function+0x0/0x20
>> [<c011c800>] default_wake_function+0x0/0x20
>> [<c03c4d14>] i830_ioctl+0xe4/0x160
>> [<c016d9e0>] sys_ioctl+0x100/0x270
>> [<c010524b>] syscall_call+0x7/0xb
>>Code: 90 8d 74 26 00 56 53 83 ec 0c 8b 74 24 18 8b 9e 08 07 00 00 89 34 24 e8 09 df ff ff 83 7b 28 0f 7e 73 8b 43 24 8b 53 1c 8b 4b 0c <c7> 04 10 01 00 00 02 83 c0 04 21 c8 c7 04 10 00 00 80 03 83 c0
>> nfs warning: mount version older than kernel
>>
>>
>>
>>_______________________________________________
>>xorg mailing list
>>xorg at freedesktop.org
>>http://freedesktop.org/mailman/listinfo/xorg
>>
>>
>>
>>
>>
>_______________________________________________
>xorg mailing list
>xorg at freedesktop.org
>http://freedesktop.org/mailman/listinfo/xorg
>
>
More information about the xorg
mailing list